arXiv subjects

Helio Chacham

Publications and source records attributed to Helio Chacham.

6 recordsLinked to original sources

arXiv2026

Anisotropic Dopant and Strain Architectures in WS$_2$ Nanocrystals Driven by Growth Kinetics

Dopant distribution in two-dimensional semiconductors is typically assumed to be stochastic, limiting deterministic defect engineering. Here, we show that non-equilibrium growth kinetics can be harnessed to define dopant-driven strain architectures in vanadium-doped WS$_2$ monolayers. Using synchrotron X-ray fluorescence, we identify preferential vanadium incorporation, anti-correlated with tungsten content, along crystallographic bisectors. An adsorption-growth-diffusion model with a single kinetic parameter quantitatively captures the dopant segregation arising from preferential corner adsorption and limited diffusion during chemical vapor deposition growth. Hyperspectral Raman imaging demonstrates mechanically induced vibrational responses, revealing localized tensile strain ($\varepsilon \approx0.70\%$) channels associated with the anisotropic dopant distribution. This regime is marked by the depletion of W-site-sensitive in-plane modes and the emergence of a localized $J2$ mode (210~cm$^{-1}$), which our ab-initio calculations attribute to antiphase V$-$V oscillations. These findings establish kinetic segregation as a route to deterministic chemical and strain architectures in 2D semiconductors, enabling programmable defect landscapes and strain engineering during synthesis.

cond-mat.mtrl-sci↗

arXiv2026

Resonance-Enhanced Four-Wave Mixing Imaging for Mapping Defect Regions in Vanadium-Doped WS2 Monolayers

Defect engineering is crucial for tuning 2D transition metal dichalcogenide properties for quantum and optoelectronic applications. While conventional photoluminescence (PL) and Raman spectroscopies are important characterization tools, their mapping in large area samples can be time-consuming and lacks direct sensitivity for comprehensive defect characterization. Here, we introduce resonance-enhanced four-wave mixing (FWM) imaging for precise imaging and characterization of vanadium-induced defect states in WS2 monolayers. Our multi-modal investigation, integrating hyperspectral PL, Raman, and supported by density functional calculations, reveals nanoscale doping inhomogeneities, their influence on excitonic and vibrational properties. We observe resonance-enhanced FWM signals correlating with vanadium-induced defect regions, evidencing their unique nonlinear optical response. This work establishes FWM as an essential platform for high-resolution, defect-sensitive imaging, advancing defect-engineered excitonic devices and enabling novel nonlinear quantum photonics.

cond-mat.mes-hall↗

arXiv2024

Strong magneto-optical responses of an ensemble of defect-bound excitons in ambient exposed WS$_{2}$ and WSe$_{2}$ monolayers

Transition metal dichalcogenide (TMD) monolayers present a singular coupling in their spin and valley degrees of freedom. Moreover, by applying an external magnetic field it is possible to break the energy degeneracy between their K and $-$K valleys. This valley Zeeman effect opens the possibility of controlling and distinguishing the spin and valley characters of charge carriers in TMDs by their optical transition energies, making these materials promising for the next generation of spintronic and photonic devices. However, the free excitons of pristine TMD monolayers present a moderate valley Zeeman splitting of $\approx 0.23$ meV/T. Therefore, alternative excitonic states with higher magnetic responses are mandatory for application purposes. Here, we investigate the magneto-optical properties of ambient exposed WS$_2$ and WSe$_2$ monolayers by circularly polarized magneto-photoluminescence experiments at cryogenic temperatures. A broad lower energy photoluminescence emission related to an ensemble of defects is observed, presenting remarkable valley-related splittings of $\approx 1.45$ meV/T and $\approx 1.11$ meV/T for WS$_2$ and WSe$_2$ monolayers, respectively. In addition, we report a significant valley polarization of charge carriers in the defect mid-gap states induced by the external magnetic field. We explain this valley-polarized population and enhanced valley-related splitting in terms of imbalanced intervalley relaxations, leading to a magnetic field-dependent distribution of charge carriers in multiple defect levels. This effect, together with the individual Zeeman shiftings of the mid-gap states, explains the strong magneto-optical responses observed. Our work uncovers the singular potential of manipulating the light emission of ambient exposed TMD monolayers by an external magnetic field.

cond-mat.mes-hall↗

arXiv2022

High throughput investigation of an emergent and naturally abundant 2D material: Clinochlore

Phyllosilicate minerals, which form a class of naturally occurring layered materials (LMs), have been recently considered as a low-cost source of two-dimensional (2D) materials. Clinochlore [Mg5Al(AlSi3)O10(OH)8] is one of the most abundant phyllosilicate minerals in nature, exhibiting the capability to be mechanically exfoliated down to a few layers. An important characteristic clinochlore is the natural occurrence of defects and impurities which can strongly affect their optoelectronic properties, possibly in technologically interesting ways. In the present work, we carry out a thorough investigation of the clinochlore structure on both bulk and 2D exfoliated forms, discussing its optical features and the influence of the insertion of impurities on its macroscopic properties. Several experimental techniques are employed, followed by theoretical first-principles calculations considering several types of naturally-ocurring transition metal impurities in the mineral lattice and their effect on electronic and optical properties. We demonstrate the existence of requirements concerning surface quality and insulating properties of clinochlore that are mandatory for its suitable application in nanoelectronic devices. The results presented in this work provide important informations for clinochlore potential applications and establish a basis for further works that intend to optimize its properties to relevant 2D technological applications through defect engineering.

cond-mat.mtrl-sci↗

arXiv2004

Structures of Si and Ge nanowires in the sub-nanometer range

We report an ab-initio investigation of several possible Si and Ge pristine nanowires with diameters between 0.5 and 1.2 nm. We considered nanowires based on the diamond structure, high-density bulk structures, and fullerene-like structures. We find that the diamond structure nanowires are unstable for diameters smaller than 1 nm, and undergo considerable structural transformations towards amorphous-like wires. Such instability is consistent with a continuum model that predicts, for both Si and Ge, a stability crossover between diamond and high-density-structure nanowires for diameters smaller than 1 nm. For diameters between 0.8 nm and 1 nm, filled-fullerene wires are the most stable ones. For even smaller diameters (d~0.5 nm), we find that a simple hexagonal structure is particularly stable for both Si and Ge.

cond-mat.mtrl-sci↗

arXiv1999

Energetics of the oxidation and opening of a carbon nanotube

We apply first principles calculations to study the opening of single-wall carbon nanotubes (SWNT's) by oxidation. We show that an oxygen rim can stabilize the edge of the open tube. The sublimation of CO$_2$ molecules from the rim with the subsequent closing of the tube changes from endothermic to exothermic as the tube radius increases, within the range of experimental feasible radii. We also obtain the energies for opening the tube at the cap and at the wall, the latter being significantly less favorable.

cond-mat.mtrl-sci↗