Helmut Riedl | Searcharxiv

arXiv2026

A correlation of structural changes with nanomechanical properties in TiN-AlN multilayer films

The present work investigates the changes in overall nanomechanical properties of reactively sputtered TiN-AlN multilayer films arising due to phase transformation in the AlN layers. Multilayered TiN-AlN films were sputter deposited with constant TiN layer thickness of 5 nm while the AlN layer thickness varied between 1-5 nm. The AlN underwent a phase transition from cubic rock salt to hexagonal wurtzite above 3 nm thickness due to the lattice strains. The hardness and indentation modulus of the multilayers decreased with increasing AlN film thickness, up to 3 nm, due to increased volume fraction of softer AlN layer and then stabilized for 4 nm and 5 nm thickness films. Micropillar compression of these multilayers showed a transition from columnar brittle to partially ductile failure associated with crack deflection with increasing AlN film thickness. Interestingly, nanoindentation scratch resistance of 3 nm AlN multilayer was observed to be superior compared to all other films. The crack propagation behavior in scratching showed increased microcracking tendency towards higher AlN film thickness. This shows that cubic to hexagonal transformation in AlN is beneficial for improving the damage tolerance of the multilayer system.

cond-mat.mtrl-sci↗

arXiv2023

Se Nano-Powder Conversion into Lubricious 2D Selenide Layers by Tribochemical Reactions

Transition metal dichalcogenide (TMD) coatings have attracted enormous scientific and industrial interest due to their outstanding tribological behavior. The paradigmatic example is MoS2, even though selenides and tellurides have demonstrated superior tribological properties. Here, we describe an innovative in-operando conversion of Se nano-powders into lubricious 2D selenides by sprinkling them onto sliding metallic surfaces coated with Mo and W thin films. Advanced material characterization confirms the tribochemical formation of a thin tribofilm containing selenides, reducing the coefficient of friction down to below 0.1 in ambient air, levels typically reached using fully formulated oils. Ab initio molecular dynamics simulations under tribological conditions reveal the atomistic mechanisms that result in shear-induced synthesis of selenide monolayers from nano-powders. The use of Se nano-powder provides thermal stability and prevents outgassing in vacuum environments. Additionally, the high reactivity of the Se nano-powder with the transition metal coating in the conditions prevailing in the contact interface yields highly reproducible results, making it particularly suitable for the replenishment of sliding components with solid lubricants, avoiding the long-lasting problem of TMD-lubricity degradation caused by environmental molecules. The suggested straightforward approach demonstrates an unconventional and smart way to synthesize TMDs in-operando and exploit their friction- and wear reducing impact.

cond-mat.mtrl-sci↗