Searcharxiv⌕ Search

arXiv subjects

Henk W. J. Blöte

Publications and source records attributed to Henk W. J. Blöte.

32 records · Page 2Linked to original sources

Critical line of an n-component cubic model

We consider a special case of the n-component cubic model on the square lattice, for which an expansion exists in Ising-like graphs. We construct a transfer matrix and perform a finite-size-scaling analysis to determine the critical points for several values of n. Furthermore we determine several universal quantities, including three critical exponents. For n<2, these results agree well with the theoretical predictions for the critical O(n) branch. This model is also a special case of the ($N_α,N_β$) model of Domany and Riedel. It appears that the self-dual plane of the latter model contains the exactly known critical points of the n=1 and 2 cubic models. For this reason we have checked whether this is also the case for 1<n<2. However, this possibility is excluded by our numerical results.

cond-mat.stat-mech↗

Surface and bulk transitions in three-dimensional O(n) models

Using Monte Carlo methods and finite-size scaling, we investigate surface criticality in the O$(n)$ models on the simple-cubic lattice with $n=1$, 2, and 3, i.e. the Ising, XY, and Heisenberg models. For the critical couplings we find $K_{\rm c}(n=2)=0.454 1655 (10)$ and $K_{\rm c}(n=3)= 0.693 002 (2)$. We simulate the three models with open surfaces and determine the surface magnetic exponents at the ordinary transition to be $y_{h1}^{\rm (o)}=0.7374 (15)$, $0.781 (2)$, and $0.813 (2)$ for $n=1$, 2, and 3, respectively. Then we vary the surface coupling $K_1$ and locate the so-called special transition at $κ_{\rm c} (n=1)=0.50214 (8)$ and $κ_{\rm c} (n=2)=0.6222 (3)$, where $κ=K_1/K-1$. The corresponding surface thermal and magnetic exponents are $y_{t1}^{\rm (s)} =0.715 (1)$ and $y_{h1}^{\rm (s)} =1.636 (1)$ for the Ising model, and $y_{t1}^{\rm (s)} =0.608 (4)$ and$y_{h1}^{\rm (s)} =1.675 (1)$ for the XY model. Finite-size corrections with an exponent close to -1/2 occur for both models. Also for the Heisenberg model we find substantial evidence for the existence of a special surface transition.

cond-mat.stat-mech↗

The boundary between long-range and short-range critical behavior

We investigate phase transitions of two-dimensional Ising models with power-law interactions, using an efficient Monte Carlo algorithm. For slow decay, the transition is of the mean-field type; for fast decay, it belongs to the short-range Ising universality class. We focus on the intermediate range, where the critical exponents depend continuously on the power law. We find that the boundary with short-range critical behavior occurs for interactions depending on distance r as r^{-15/4}. This answers a long-standing controversy between mutually conflicting renormalization-group analyses.

cond-mat.stat-mech↗

The Cluster Processor: New Results

We present a progress report on the Cluster Processor, a special-purpose computer system for the Wolff simulation of the three-dimensional Ising model, including an analysis of simulation results obtained thus far. These results allow, within narrow error margins, a determination of the parameters describing the phase transition of the simple-cubic Ising model and its universality class. For an improved determination of the correction-to-scaling exponent, we include Monte Carlo data for systems with nearest-neighbor and third-neighbor interactions in the analysis.

cond-mat.stat-mech↗

Monte Carlo investigations of phase transitions: status and perspectives

Using the concept of finite-size scaling, Monte Carlo calculations of various models have become a very useful tool for the study of critical phenomena, with the system linear dimension as a variable. As an example, several recent studies of Ising models are discussed, as well as the extension to models of polymer mixtures and solutions. It is shown that using appropriate cluster algorithms, even the scaling functions describing the crossover from the Ising universality class to the mean-field behavior with increasing interaction range can be described. Additionally, the issue of finite-size scaling in Ising models above the marginal dimension (d*=4) is discussed.

cond-mat.stat-mech↗

Finite-size scaling above the upper critical dimension revisited: The case of the five-dimensional Ising model

Monte Carlo results for the moments of the magnetization distribution of the nearest-neighbor Ising ferromagnet in a L^d geometry, where L (4 \leq L \leq 22) is the linear dimension of a hypercubic lattice with periodic boundary conditions in d=5 dimensions, are analyzed in the critical region and compared to a recent theory of Chen and Dohm (CD) [X.S. Chen and V. Dohm, Int. J. Mod. Phys. C (1998)]. We show that this finite-size scaling theory (formulated in terms of two scaling variables) can account for the longstanding discrepancies between Monte Carlo results and the so-called ``lowest-mode'' theory, which uses a single scaling variable tL^{d/2} where t=T/T_c-1 is the temperature distance from the critical temperature, only to a very limited extent. While the CD theory gives a somewhat improved description of corrections to the ``lowest-mode'' results (to which the CD theory can easily be reduced in the limit t \to 0, L \to \infty, tL^{d/2} fixed) for the fourth-order cumulant, discrepancies are found for the susceptibility (L^d ). Reasons for these problems are briefly discussed.

cond-mat.stat-mech↗

Crossover scaling in two dimensions

We determine the scaling functions describing the crossover from Ising-like critical behavior to classical critical behavior in two-dimensional systems with a variable interaction range. Since this crossover spans several decades in the reduced temperature as well as in the finite-size crossover variable, it has up to now largely evaded a satisfactory numerical determination. Using a new Monte Carlo method, we could obtain accurate results for sufficiently large interactions ranges. Our data cover the full crossover region both above and below the critical temperature and support the hypothesis that the crossover functions are universal. Also the so-called effective exponents are discussed and we show that these can vary nonmonotonically in the crossover region.

cond-mat.stat-mech↗

Nonmonotonical crossover of the effective susceptibility exponent

We have numerically determined the behavior of the magnetic susceptibility upon approach of the critical point in two-dimensional spin systems with an interaction range that was varied over nearly two orders of magnitude. The full crossover from classical to Ising-like critical behavior, spanning several decades in the reduced temperature, could be observed. Our results convincingly show that the effective susceptibility exponent gamma_eff changes nonmonotonically from its classical to its Ising value when approaching the critical point in the ordered phase. In the disordered phase the behavior is monotonic. Furthermore the hypothesis that the crossover function is universal is supported.

cond-mat.stat-mech↗

Classical critical behavior of spin models with long-range interactions

We present the results of extensive Monte Carlo simulations of Ising models with algebraically decaying ferromagnetic interactions in the regime where classical critical behavior is expected for these systems. We corroborate the values for the exponents predicted by renormalization theory for systems in one, two, and three dimensions and accurately observe the predicted logarithmic corrections at the upper critical dimension. We give both theoretical and numerical evidence that above the upper critical dimension the decay of the critical spin-spin correlation function in finite systems consists of two different regimes. For one-dimensional systems our estimates for the critical couplings are more than two orders of magnitude more accurate than existing estimates. In two and three dimensions we give, to our knowledge, the first results for the critical couplings.

cond-mat.stat-mech↗

Cluster Monte Carlo: Scaling of Systematic Errors in the 2D Ising Model

We present an extensive analysis of systematic deviations in Wolff cluster simulations of the critical Ising model, using random numbers generated by binary shift registers. We investigate how these deviations depend on the lattice size, the shift-register length, and the number of bits correlated by the production rule. They appear to satisfy scaling relations.

cond-mat.stat-mech↗

Universality and the five-dimensional Ising model

We solve the long-standing discrepancy between Monte Carlo results and the renormalization prediction for the Binder cumulant of the five-dimensional Ising model. Our conclusions are based on accurate Monte Carlo data for systems with linear sizes up to L=22. A detailed analysis of the corrections to scaling allows the extrapolation of these results to L=\infinity. Our determination of the critical point, K_c=0.1139150 (4), is more than an order of magnitude more accurate than previous estimates.

cond-mat.stat-mech↗

Medium-range interactions and crossover to classical critical behavior

We study the crossover from Ising-like to classical critical behavior as a function of the range R of interactions. The power-law dependence on R of several critical amplitudes is calculated from renormalization theory. The results confirm the predictions of Mon and Binder, which were obtained from phenomenological scaling arguments. In addition, we calculate the range dependence of several corrections to scaling. We have tested the results in Monte Carlo simulations of two-dimensional systems with an extended range of interaction. An efficient Monte Carlo algorithm enabled us to carry out simulations for sufficiently large values of R, so that the theoretical predictions could actually be observed.

cond-mat↗

Finite-size Scaling and Universality above the Upper Critical Dimensionality

According to renormalization theory, Ising systems above their upper critical dimensionality d_u = 4 have classical critical behavior and the ratio of magnetization moments Q = ^2 / has the universal value 0.456947... However, Monte Carlo simulations of d = 5 Ising models have been reported which yield strikingly different results, suggesting that the renormalization scenario is incorrect. We investigate this issue by simulation of a more general model in which d_u < 4, and a careful analysis of the corrections to scaling. Our results are in a perfect agreement with the renormalization theory and provide an explanation of the discrepancy mentioned.

cond-mat↗

Ising Universality in Three Dimensions: A Monte Carlo Study

We investigate three Ising models on the simple cubic lattice by means of Monte Carlo methods and finite-size scaling. These models are the spin-1/2 Ising model with nearest-neighbor interactions, a spin-1/2 model with nearest-neighbor and third-neighbor interactions, and a spin-1 model with nearest-neighbor interactions. The results are in accurate agreement with the hypothesis of universality. Analysis of the finite-size scaling behavior reveals corrections beyond those caused by the leading irrelevant scaling field. We find that the correction-to-scaling amplitudes are strongly dependent on the introduction of further-neighbor interactions or a third spin state. In a spin-1 Ising model, these corrections appear to be very small. This is very helpful for the determination of the universal constants of the Ising model. The renormalization exponents of the Ising model are determined as y_t = 1.587 (2), y_h = 2.4815 (15) and y_i = -0.82 (6). The universal ratio Q = ^2/ is equal to 0.6233 (4) for periodic systems with cubic symmetry. The critical point of the nearest-neighbor spin-1/2 model is K_c=0.2216546 (10).

cond-mat↗