Searcharxiv⌕ Search

arXiv subjects

Henning Bonart

Publications and source records attributed to Henning Bonart.

7 recordsLinked to original sources

Amortized Transport-Map Likelihoods for Hierarchical Inverse Problems with Application to Wetting

Hierarchical Bayesian models pool measurements, but with the forward model in the likelihood every posterior evaluation costs one forward solve per cell. To reduce this cost, we introduce a simulation-based inference framework in which a triangular transport-map likelihood, trained once per design, serves every cell. We apply it to infer wetting properties from photographs of a stable hole in a thin liquid film. The hole's radius depends, through the nonlinear Young-Laplace equation, on the contact angle and capillary length. One photograph gives rank-one information about them, so we pool many in a hierarchical model whose cells, each a substrate at one volume setting, share the apparatus geometry and the noise scale. A design fixes the number of substrates, the volume settings and the photographs per cell. The map's posteriors agree with direct sampling of the forward model in the wetting properties at a synthetic validation design, and less closely at a larger synthetic scaling design. At the validation design, simulation-based calibration detects no departure for any parameter. There, the map needs several hundred times fewer forward-model evaluations than direct sampling with a gradient-free ensemble sampler for a single posterior, and about five orders of magnitude fewer over a calibration study of 200 posteriors. On real photographs its posterior agrees with direct sampling and is consistent with the measured radii. Trained offline, the amortized map turns new photographs into a posterior with no forward solve. It is thus a major step toward measuring wetting properties in situ without disturbing the liquid.

stat.AP↗

Phase-field simulation of interfacial stability in structured gas-liquid contactors: design rules for gas diffusion electrodes

Many process engineering applications hold a gas-liquid interface stationary inside a structured solid by a controlled pressure difference. Gas diffusion electrodes (GDEs) are one such case, where the interface separates the liquid electrolyte from the gaseous reactant. Maintaining it is particularly challenging in organic electrosynthesis, where low surface tensions lower the admissible pressures throughout and small contact angles leave the electrode with little margin against flooding. Here, we quantify how the shape, wettability, and three-dimensional topology of a structured medium set this window, using phase-field simulations of the Cahn-Hilliard-Navier-Stokes equations. Each geometry is characterised by its Laplace pressure curve, which yields both the maximum admissible pressure difference and the stiffness of the interface against pressure fluctuations. For single flat orifices at constant open area, elongating the opening from an aspect ratio of one to six raises the admissible pressure difference by 40 % and the stiffness by a factor of 3.3. Comparison with slits of equal width shows that this gain originates entirely from the reduced opening width. Sheared, diamond shaped openings are markedly less effective. In woven meshes, the wettability displaces the operating window several times as far as it stretches it. A less wetting surface therefore buys flooding margin largely at the expense of breakthrough margin, whereas the geometric route, established here for flat openings, widens the window itself. From these results we derive design rules for structured gas-liquid contactors and improved GDE architectures for organic electrosynthesis.

physics.flu-dyn↗

Liquid Surfaces with Chaotic Capillary Waves Exhibit an Effective Surface Tension

The influence of chaotic capillary waves on the time-averaged shape of a liquid volume is studied experimentally and theoretically. In that context, a liquid film containing a stable hole is subjected to Faraday waves. The waves induce a shrinkage of the hole compared to the static film, which can be described using the Young-Laplace equation by incorporating an effective capillary length. In the regime of chaotic Faraday waves, the presented theory explains the hole shrinkage quantitatively, linking the effective capillary length to the wave energy. The effect of chaotic Faraday waves can be interpreted as a dynamic surface force that acts against surface tension.

physics.flu-dyn↗

Optimal Control of Droplets on a Solid Surface using Distributed Contact Angles

Controlling the shape and position of moving and pinned droplets on a solid surface is an important feature often found in microfluidic applications. However, automating them, e.g., for high-throughput applications, does rarely involve model-based optimal control strategies. In this work, we demonstrate the optimal control of both the shape and position of a droplet sliding on an inclined surface. This basic test case is a fundamental building block in plenty of microfluidic designs. The static contact angle between the solid surface, the surrounding gas, and the liquid droplet serves as the control variable. By using several control patches, e.g., like done in electrowetting, the contact angles are allowed to vary in space and time. In computer experiments, we are able to calculate mathematically optimal contact angle distributions using gradient-based optimization. The dynamics of the droplet are described by the Cahn-Hilliard-Navier-Stokes equations. We anticipate our demonstration to be the starting point for more sophisticated optimal design and control concepts.

physics.flu-dyn↗

On the stability of gravity-driven liquid films overflowing microstructures with sharp corners

We are concerned with the stability of thin liquid films overflowing single microstructures with sharp corners. The microstructures were of rectangular and triangular shape. Their heights and widths were 0.25, 0.5 and 0.75 times the Nusselt film thickness. To observe smooth, wavy and very unstable films we performed simulations with Reynolds numbers ranging from 10 to 70. The dynamics of the liquid film and the overflowing gas phase were described by the coupling between the Cahn-Hilliard and Navier-Stokes equations. The resulting model forms a very tightly coupled and nonlinear system of equations. Therefore we carefully selected the solution strategy to enable efficient and accurate large-scale simulations. Our results showed that the formation of waves was shifted to higher Reynolds numbers compared to the film on a smooth surface. If waves were finally formed the microstructures led to irregular waves. Our results indicate a great influence of the microstructure's shape and dimension on the stability of the overflowing liquid film.

physics.flu-dyn↗

Optimal Control of Sliding Droplets using the Contact Angle Distribution

Controlling the shape and position of moving and pinned droplets on a solid surface is an important feature often found in microfluidic applications. In this work, we consider a well investigated phase field model including contact line dynamics as the state system for an (open-loop) optimal control problem. Here the spatially and temporally changeable contact angles between droplet and solid are considered as the control variables. We consider a suitable, energy stable, time discrete version of the state equation in our optimal control problem. We discuss regularity of the solution to the time discrete state equation and its continuity and differentiability properties. Furthermore, we show existence of solutions and state first order optimality conditions to the optimal control problem. We illustrate our results by actively pushing a droplet uphill against gravity in an optimal way.

math.NA↗

Comparison of Energy Stable Simulation of Moving Contact Line Problems using a Thermodynamically Consistent Cahn-Hilliard Navier-Stokes Model

Liquid droplets sliding along solid surfaces are a frequently observed phenomenon in nature, e.g., raindrops on a leaf, and in everyday situations, e.g., drops of water in a drinking glass. To model this situation, we use a phase field approach. The bulk model is given by the thermodynamically consistent Cahn-Hilliard Navier-Stokes model from [Abels et al., Math. Mod. Meth. Appl. Sc., 22(3), 2012]. To model the contact line dynamics we apply the generalized Navier boundary condition for the fluid and the dynamically advected boundary contact angle condition for the phase field as derived in [Qian et al., J. Fluid Mech., 564, 2006]. In recent years several schemes were proposed to solve this model numerically. While they widely differ in terms of complexity, they all fulfill certain basic properties when it comes to thermodynamic consistency. However, an accurate comparison of the influence of the schemes on the moving contact line is rarely found. Therefore, we thoughtfully compare the quality of the numerical results obtained with three different schemes and two different bulk energy potentials. Especially, we discuss the influence of the different schemes on the apparent contact angles of a sliding droplet.

physics.comp-ph↗