arXiv subjects

Henri Lhuissier

Publications and source records attributed to Henri Lhuissier.

8 recordsLinked to original sources

arXiv2020

Deformation upon impact of a concentrated suspension drop

We study the impact between a plate and a drop of non-colloidal solid particles suspended in a Newtonian liquid, with a specific attention to the case when the particle volume fraction, $ϕ$, is close to - or even exceeds - the critical volume fraction, $ϕ_c$, at which the steady effective viscosity of the suspension diverges. We use a specific concentration protocol together with an accurate determination of $ϕ$ for each drop and we measure the deformation $β$ for different liquid viscosities, impact velocities and particle sizes. At low volume fractions, $β$ is found to follow closely an effective Newtonian behavior, which we determine by documenting the low deformation limit for a highly viscous Newtonian drop and characterizing the effective shear viscosity of our suspensions. By contrast, whereas the effective Newtonian approach predicts that $β$ vanishes at $ϕ_c$, a finite deformation is observed for $ϕ>ϕ_c$. This finite deformation remains controlled by the suspending liquid viscosity and increases with increasing particle size, which suggests that the dilatancy of the particle phase is a key factor of the dissipation process close to and above $ϕ_c$.

physics.flu-dyn↗

arXiv2019

Drop fragmentation by laser-pulse impact

We study the fragmentation of a liquid drop that is hit by a laser pulse. The drop expands into a thin sheet that breaks by the radial expulsion of ligaments from its rim and the nucleation and growth of holes on the sheet. By combining experimental data from two liquid systems with vastly different time- and length scales we show how the early-time laser-matter interaction affects the late-time fragmentation. We identify two Rayleigh--Taylor instabilities of different origins as the prime cause of the fragmentation and derive scaling laws for the characteristic breakup time and wavenumber. The final web of ligaments results from a subtle interplay between these instabilities and deterministic modulations of the local sheet thickness, which originate from the drop deformation dynamics and spatial variations in the laser-beam profile.

physics.flu-dyn↗

arXiv2017

Clogging in constricted suspension flows

The flow of a charged-stabilized suspension through a single constricted channel is studied experimentally by tracking the particles individually. Surprisingly, the behavior is found to be qualitatively similar to that of inertial dry granular systems: For small values of the neck-to-particle size ratio (D/d<3), clogs form randomly as arches of particle span the constriction. The statistics of the clogging events are Poissonian as reported for granular systems and agree, for moderate particle volume fraction ($ϕ\approx20\%$), with a simple stochastic model for the number of particles at the neck. For larger neck sizes (D/d>3), even at the largest $ϕ$ ($\approx60\%$) achievable in the experiments, an uninterrupted particle flow is observed, which resembles that of an hourglass. This particularly small value of D/d at the transition to a practically uninterrupted flow is attributed to the low effective friction between the particles, achieved by the particle's functionalization and lubrication.

physics.flu-dyn↗

arXiv2016

Laser impact on a drop

The impact of a laser pulse on a highly absorbing liquid drop can lead to a violent response: the drop is accelerated, strongly deforms, and eventually fragments. Shock waves, the ejection of matter, and even plasma formation can accompany this process ...

physics.flu-dyn↗

arXiv2016

Tribonucleation of bubbles

We report on the nucleation of bubbles on solids that are gently rubbed against each other in a liquid. The phenomenon is found to depend strongly on the material and roughness of the solid surfaces. For a given surface, temperature, and gas content, a trail of growing bubbles is observed if the rubbing force and velocity exceed a certain threshold. Direct observation through a transparent solid shows that each bubble in the trail results from the early coalescence of several microscopic bubbles, themselves detaching from microscopic gas pockets forming between the solids. From a detailed study of the wear tracks, with atomic force and scanning electron microscopy imaging, we conclude that these microscopic gas pockets originate from a local fracturing of the surface asperities, possibly enhanced by chemical reactions at the freshly created surfaces. Our findings will be useful either for preventing undesired bubble formation or, on the contrary, for "writing with bubbles," i.e., creating controlled patterns of microscopic bubbles.

physics.flu-dyn↗

arXiv2015

Drop deformation by laser-pulse impact

A free-falling absorbing liquid drop hit by a nanosecond laser-pulse experiences a strong recoil-pressure kick. As a consequence, the drop propels forward and deforms into a thin sheet which eventually fragments. We study how the drop deformation depends on the pulse shape and drop properties. We first derive the velocity field inside the drop on the timescale of the pressure pulse, when the drop is still spherical. This yields the kinetic-energy partition inside the drop, which precisely measures the deformation rate with respect to the propulsion rate, before surface tension comes into play. On the timescale where surface tension is important the drop has evolved into a thin sheet. Its expansion dynamics is described with a slender-slope model, which uses the impulsive energy-partition as an initial condition. Completed with boundary integral simulations, this two-stage model explains the entire drop dynamics and its dependance on the pulse shape: for a given propulsion, a tightly focused pulse results in a thin curved sheet which maximizes the lateral expansion, while a uniform illumination yields a smaller expansion but a flat symmetric sheet, in good agreement with experimental observations.

physics.flu-dyn↗

arXiv2015

Drop Shaping by Laser-Pulse Impact

We show how the deposition of laser energy induces propulsion and strong deformation of an absorbing liquid body. Combining high speed with stroboscopic imaging, we observe that a millimeter-sized dyed water drop hit by a millijoule nanosecond laser pulse propels forward at several meters per second and deforms until it eventually fragments. The drop motion results from the recoil momentum imparted at the drop surface by water vaporization. We measure the propulsion speed and the time-deformation law of the drop, complemented by boundary-integral simulations. The drop propulsion and shaping are explained in terms of the laser-pulse energy, the drop size, and the liquid properties. These findings are, for instance, crucial for the generation of extreme ultraviolet light in nanolithography machines.

physics.flu-dyn↗

arXiv2013

Levitation of a drop over a moving surface

We investigate the levitation of a drop gently deposited onto the inner wall of a rotating hollow cylinder. For a sufficient velocity of the wall, the drop steadily levitates over a thin air film and reaches a stable angular position in the cylinder, where the drag and lift balance the weight of the drop. Interferometric measurement yields the three-dimensional (3D) air film thickness under the drop and reveals the asymmetry of the profile along the direction of the wall motion. A two-dimensional (2D) model is presented which explains the levitation mechanism, captures the main characteristics of the air film shape and predicts two asymptotic regimes for the film thickness $h_0$: For large drops $h_0\sim\ca^{2/3}κ_b^{-1}$, as in the Bretherton problem, where $\ca$ is the capillary number based on the air viscosity and $κ_b$ is the curvature at the bottom of the drop. For small drops $h_0\sim\ca^{4/5}(aκ_b)^{4/5}κ_b^{-1}$, where $a$ is the capillary length.

physics.flu-dyn↗