SearcharxivSearch

arXiv subjects

Henry Shum

Publications and source records attributed to Henry Shum.

10 recordsLinked to original sources

Purcell swimmer near a wall

We study the effects of hydrodynamic interactions between a wall and the Purcell three-link swimmer in the two-dimensional case. After deriving the equations of motion in a low Reynolds number regime using Resistive Force Theory with suitably modified drag coefficients, we show, by means of criteria from Geometric Control Theory, that the system is controllable at configurations that are nearly parallel to the wall. Furthermore, we study configurations that are tilted, and we show net displacement with respect to the initial orientation. Some numerical experiments illustrate the analytical results.

physics.flu-dyn

Controllability and kinetic limit of spherical particles immersed in a viscous fluid

This paper deals with systems of spherical particles immersed in a viscous fluid. Two aspects are studied, namely the controllability of such systems, with particular attention to the case of one active particle and either one or two passive ones, and the kinetic limit of such systems as the number of particles diverges. The former issue is tackled in the framework of geometric control theory, whereas the latter resorts to Boltzmann-type formulations of the system of interacting particles.

math.AP

Hydrodynamic interactions between a sedimenting squirmer and a planar wall

The hydrodynamic interactions between a sedimenting microswimmer and a solid wall have ubiquitous biological and technological applications. A plethora of gravity-induced swimming dynamics near a planar no-slip wall provides a platform for designing artificial microswimmers that can generate directed propulsion through their translation-rotation coupling near a wall. In this work we provide exact solutions for a squirmer (a model swimmer of spherical shape with a prescribed slip velocity) facing either towards or away from a planar wall perpendicular to gravity. These exact solutions are used to validate a numerical code based on the boundary integral method with an adaptive mesh for distances from the wall down to 0.1% of the squirmer radius. This boundary integral code is then used to investigate the rich gravity-induced dynamics near a wall, mapping out the detailed bifurcation structures of the swimming dynamics in terms of orientation and distance to the wall. Simulation results show that a squirmer may transverse along the wall, move to a fixed point at a given height with a fixed orientation in a monotonic way or in an oscillatory fashion, or oscillate in a limit cycle in the presence of wall repulsion.

cond-mat.soft

Control of Microparticles Through Hydrodynamic Interactions

The controllability of passive microparticles that are advected with the fluid flow generated by an actively controlled one is studied. The particles are assumed to be suspended in a viscous fluid and well separated so that the far-field Stokes flow solutions may be used to describe their interactions. Applying concepts from geometric control theory, explicit moves characterized by a small amplitude parameter $\varepsilon$ are devised to prove that the active particle can control one or two passive particles. The leading-order (in $\varepsilon$) theoretical predictions of the particle displacements are compared with those obtained numerically and it is found that the discrepancy is small even when $\varepsilon\approx 1$. These results demonstrate the potential for a single actuated particle to perform complex micromanipulations of passive particles in a suspension.

physics.flu-dyn

Designing a Magnetic Micro-Robot for Transporting Filamentous Microcargo

In recent years, the medical industry has witnessed a growing interest in minimally invasive procedures, with magnetic microrobots emerging as a promising approach. These micro-robots possess the ability to navigate through various media, including viscoelastic and non-Newtonian fluids, enabling targeted drug delivery and medical interventions. Many current designs, inspired by micro-swimmers in biological systems like bacteria and sperm, employ a contact-based method for transporting a payload. Adhesion between the cargo and the carrier can make release at the target site problematic. In this project, our primary objective was to explore the potential of a helical micro-robot for non-contact drug or cargo delivery. We conducted a comprehensive study on the shape and geometrical parameters of the helical microrobot, specifically focusing on its capability to transport passive filaments. Based on our analysis, we propose a novel design consisting of three sections with alternating handedness, including two pulling and one pushing microhelices, to enhance the capture and transport of passive filaments in Newtonian fluids using a non-contact approach. We then simulated the process of capturing and transporting the passive filament, and tested the functionality of the newly designed micro-robot. Our findings offer valuable insights into the physics of helical micro-robots and their potential for medical procedures and drug delivery. Furthermore, the proposed non-contact method for delivering filamentous cargo could lead to the development of more efficient and effective microrobots for medical applications.

cs.RO

Modeling of uniflagellated bacterial locomotion in unbounded fluid and near a no-slip plane surface

The accumulation of swimming bacteria near surfaces may lead to biological processes such as biofilm formation and wound infection. Previous experimental observations of Vibrio alginolyticus showed an interesting correlation between the bacterial entrapment near surfaces and the concentration of NaCl in the swimming medium. At higher concentrations of the ions, V.alginolyticus in the puller mode (with flagella in front of the body) tends to stay close to the surface whereas in the pusher mode (with flagella behind the body) it is more likely to escape from the surface. Motivated by these observations, we numerically investigate the locomotion of a uniflagellated model bacterium in unbounded fluid and near a planar surface. In our elastohydrodynamic model, the boundary integral technique and Kirchhoff rod model are employed respectively to calculate the hydrodynamic forces on the swimmer and model the elastic deformations of the flagellum consisting of a short, flexible hook and a long, relatively stiff filament. Our numerical results demonstrate that hydrodynamic interactions between the model bacterium and the solid wall cause the puller type to be attracted to the surface, whereas the pusher type is either repelled from or attracted to the surface depending on the flagellum and hook stiffness, the ion concentration (which determines the motor torque), and the cell body aspect ratio. We also show that large deformations of a very flexible hook can lead to an abrupt reorientation of the cell when the bacterium encounters a solid surface. These research findings can be used not only in understanding uniflagellated bacterial behavior but also in designing bacteria-mimicking micro-robots with biomedical and environmental monitoring applications.

physics.bio-ph

Boundary-Bound Reactions: Pattern Formation with and without Hydrodynamics

We study chemical pattern formation in a fluid between two flat plates and the effect of such patterns on the formation of convective cells. This patterning is made possible by assuming the plates are chemically reactive or release reagents into the fluid, both of which we model as chemical fluxes. We view this as a specific example of boundary-bound reactions. In the absence of coupling with flow, we show that the two-reagent system with nonlinear reactions admits instabilities equivalent to diffusion-driven Turing instabilities. In the other extreme, when chemical fluxes at the two bounding plates are constant, diffusion-driven instabilities do not occur but hydrodynamic phenomena analogous to Rayleigh-Benard convection are possible. Assuming we can influence the chemical fluxes along the domain and select suitable reaction systems, this presents a means for the control of chemical and hydrodynamic instabilities and pattern formation. We study a generic class of models and find conditions for a bifurcation to pattern formation. Afterwards, we present two examples derived from the Schnakenberg reaction. Unlike the classical Rayleigh-Benard instability, which requires a sufficiently large unstable density gradient, a chemo-hydrodynamic instability based on Turing-style pattern formation emerges from a state that is uniform in density. We also find parameters that result in the formation of convective cells whether gravity acts upwards or downwards relative to the reactive plate. The wavenumber of the cells and the direction of the flow at regions of high/low concentration depend on the orientation, hence, different patterns can be elicited by simply inverting the device. More generally, our results suggest methods for controlling pattern formation and convection by tuning reaction parameters. As a consequence, we can drive and alter fluid flow in a chamber without mechanical pumps.

physics.flu-dyn

The $N$-link swimmer in three dimensions: controllability and optimality results

The controllability of a fully three-dimensional $N$-link swimmer is studied. After deriving the equations of motion in a low Reynolds number fluid by means of Resistive Force Theory, the controllability of the minimal $2$-link swimmer is tackled using techniques from Geometric Control Theory. The shape of the $2$-link swimmer is described by two angle parameters. It is shown that the associated vector fields that govern the dynamics generate, via taking their Lie brackets, all six linearly independent directions in the configuration space; every direction and orientation can be achieved by operating on the two shape variables. The result is subsequently extended to the $N$-link swimmer. Finally, the minimal time optimal control problem and the minimisation of the power expended are addressed and a qualitative description of the optimal strategies is provided.

math.OC

Entrainment and scattering in microswimmer--colloid interactions

We use boundary element simulations to study the interaction of model microswimmers with a neutrally buoyant spherical particle. The ratio of the size of the particle to that of the swimmer is varied from $R^\mathrm{P} / R^\mathrm{S} \ll 1$, corresponding to swimmer--tracer scattering, to $R^\mathrm{P} / R^\mathrm{S} \gg 1$, approximately equivalent to the swimmer interacting with a fixed, flat surface. We find that details of the swimmer and particle trajectories vary for different swimmers. However, the overall characteristics of the scattering event fall into two regimes, depending on the relative magnitudes of the impact parameter, $ρ$, and the collision radius, $R^\mathrm{coll}=R^\mathrm{P} + R^\mathrm{S}$. The range of particle motion, defined as the maximum distance between two points on the trajectory, has only a weak dependence on the impact parameter when $ρ< R^\mathrm{coll}$ and decreases with the radius of the particle. In contrast, when $ρ>R^\mathrm{coll}$ the range decreases as a power law in $ρ$ and is insensitive to the size of the particle. We also demonstrate that large particles can cause swimmers to be deflected through large angles. In some instances, this swimmer deflection can lead to larger net displacements of the particle. Based on these results, we estimate the effective diffusivity of a particle in a dilute bath of swimmers and show that there is a non-monotonic dependence on particle radius. Similarly, we show that the effective diffusivity of a swimmer scattering in a suspension of particles varies non-monotonically with particle radius.

cond-mat.soft

Fluid transport by individual microswimmers

We discuss the path of a tracer particle as a microswimmer moves past on an infinite straight trajectory. If the tracer is sufficiently far from the path of the swimmer it moves in a closed loop. As the initial distance between the tracer and the path of the swimmer $ρ$ decreases, the tracer is displaced a small distance backwards (relative to the direction of the swimmer velocity). For much smaller tracer-swimmer separations, however, the tracer displacement becomes positive and diverges as $ρ\to 0$. To quantify this behaviour we calculate the Darwin drift, the total volume swept out by a material sheet of tracers, initially perpendicular to the swimmer path, during the swimmer motion. We find that the drift can be written as the sum of a {\em universal} term which depends on the quadrupolar flow field of the swimmer, together with a non-universal contribution given by the sum of the volumes of the swimmer and its wake. The formula is compared to exact results for the squirmer model and to numerical calculations for a more realistic model swimmer.

physics.flu-dyn