arXiv subjects

Heping Zeng

Publications and source records attributed to Heping Zeng.

At least 19 recordsLinked to original sources

arXiv2026

Comb-enabled spectral-domain image transport through perturbation-prone multimode fibers

Multimode fibers (MMFs) offer a compact platform for imaging, sensing, and information transport, but their practical deployment is hindered by sensitivity to fiber perturbations, which alter modal coupling and invalidate conventional speckle-based calibrations. Here, we demonstrate perturbation-resilient image transport through MMFs by combining image-to-spectrum encoding with dual-comb spectroscopy. Two-dimensional images are converted into comb-line-resolved spectral signatures before fiber transmission, allowing spatial information to be carried in the spectral domain rather than in the output speckle field. After propagation, dual-comb heterodyne detection maps the encoded spectrum into the radio-frequency domain, enabling massively parallel spectral readout with a single photodetector. Neural-network-assisted compressive reconstruction further enables high-fidelity imaging from sparse, noisy, and spectrally aliased measurements. Our approach achieves Pearson correlation coefficients exceeding 0.9 under strong fiber perturbations and supports frame rates up to 2.5 MHz, allowing the observation of transient switching dynamics in a digital micromirror device. These results establish a powerful tool for robust, real-time image transport through flexible MMFs, with potential applications in remote sensing and fiber-based optical instrumentation.

physics.optics↗

arXiv2026

Free-running single-cavity dual combs with Hz-level relative linewidth

Single-cavity dual-comb lasers provide a compact and efficient source for dual-comb spectroscopy in gas sensing applications; however, achieving sufficient free-running mutual coherence for comb-line-resolved, high-resolution measurements remains challenging. Here, we present a symmetry-engineered bidirectional single-cavity dual-comb laser based on an all-polarization-maintaining fiber architecture. The system exhibits exceptional free-running mutual coherence, achieving Hz-level relative linewidths without active feedback or phase correction. The time-averaged absolute jitter of the dual-comb repetition-rate difference reaches 4.7*10^-7 min-1, representing an improvement of nearly two orders of magnitude over previously reported free-running systems. As a spectroscopic demonstration, we resolve ~49,000 comb lines over a 5.4 THz optical bandwidth and measure the absorption spectrum of carbon monoxide (12CO), faithfully retrieving molecular line shapes with millisecond acquisition times. This architecture provides a compact and robust free-running platform for broadband molecular spectroscopy and millisecond-scale, line-shape-resolved gas sensing.

physics.optics↗

arXiv2026

Single-photon time-stretch computational ghost spectroscopy

Time-stretch spectroscopy is powerful for capturing transient spectral phenomena but remains fundamentally limited by detector bandwidth or timing jitter, especially under photon-starved conditions. Here, we devise and implement single-photon time-stretch computational ghost spectroscopy, which integrates dispersive wavelength-to-time mapping with programmable temporal encoding and correlation-based reconstruction to overcome these detection limitations. Specifically, temporally stretched ultrashort pulses are modulated by predefined encoding patterns and detected by a low-bandwidth detector, allowing reconstruction of near-infrared spectra with 450 resolvable channels across 1530-1590 nm without direct high-speed waveform acquisition. By further incorporating compressive sensing, accurate spectral recovery is achieved at sub-Nyquist sampling rates, substantially reducing acquisition requirements to facilitate high-speed operation at 210 kHz. In the single-photon regime, computational ghost reconstruction effectively suppresses the intrinsic detector timing jitter, yielding high-fidelity spectra at illumination fluxes down to 0.01 photons/pulse. By jointly enabling broadband coverage, high spectral resolution, high acquisition speed, and single-photon sensitivity, this approach establishes a computation-enhanced paradigm for time-stretch spectroscopy and provides a versatile platform for ultrafast and photon-efficient spectroscopic applications.

physics.optics↗

arXiv2026

Nonlinear differential imaging via vectorial parametric interaction

Optical image differentiation is a key operation for edge extraction in imaging and machine vision, yet most existing implementations rely on momentum-domain filtering elements and are typically developed within a scalar-wave framework. Here we demonstrate a nonlinear vectorial mechanism for optical image differentiation based on parametric wave mixing. By solving the full vector wave equation with a nonlinear polarization source term, we show analytically that frequency conversion intrinsically generates cross-polarized field components that correspond to spatial derivatives of the incident field. Exploiting the polarization-selective phase-matching conditions of second-order nonlinear crystals, particularly uniaxial crystals, we propose filter-free imaging schemes that simultaneously perform spatial differentiation and wavelength conversion. This nonlinear vector differentiation platform enables compact, wavelength-agile, and edge-enhanced imaging, offering new opportunities for mid-infrared imaging and all-optical signal processing.

physics.optics↗

arXiv2026

Mid-infrared snapshot spectral imaging via nonlinear radial dispersion

Mid-infrared (MIR) spectral imaging provides chemically specific contrast through molecular vibrational fingerprints, yet snapshot acquisition remains severely limited by the lack of high-sensitivity detectors and efficient spectral encoding mechanisms. Here we introduce snapshot MIR spectral imaging based on intrinsic nonlinear radial dispersion, in which wavelength-dependent phase matching simultaneously enables frequency upconversion and spectral multiplexing. Different spectral components are mapped to distinct output angles within a 4$f$ imaging architecture, enabling single-shot spectral encoding without external dispersive elements. In combination with speckle illumination encoding, spectral information is compressed and recovered without additional coding components. Leveraging nonlinear upconversion to the visible, the approach achieves room-temperature MIR spectral imaging with sensitivity approaching 1 photon/pixel/pulse across a broad spectral range from 2.5 to 4.0 $\mu$m. This work transforms spectral encoding from an external optical function into an inherent property of the nonlinear imaging process, providing a general route to high-sensitivity snapshot MIR spectral imaging.

physics.optics↗

arXiv2026

Passive all-optical synchronization for polarization-maintaining ultrafast fiber lasers

We have proposed and implemented for the first time to our best knowledge a passive and all-optical pulse synchronization for polarization-maintaining ultrafast fiber lasers. Specifically, the synchronization system was comprised of two independent Yb-doped and Er-doped mode-locked fiber lasers in a master-slave configuration. Master pulses were injected into the slave laser cavity consisting of a nonlinear amplifying loop mirror, which provided an effective fast intensity modulator due to the periodic introduction of nonreciprocal phase difference. As a result, robust and tight timing synchronization was achieved with a cavity mismatch tolerance of 800 $\mu$m and a relative timing jitter of 26 fs within 1-MHz bandwidth. In combination with all-polarization-maintaining structure of fiber lasers, long-term stable operation was demonstrated over 12 hours without the need of temperature stabilization and vibration isolation. The implemented synchronous laser system could find immediate applications such as pump-probe microscopy, two-color spectroscopy and nonlinear frequency mixing.

physics.optics↗

arXiv2026

Observation of spectral mode splitting in a pump-enhanced ring cavity for mid-infrared generation

We report on experimental and theoretical investigation of mode-splitting dynamics in a ring cavity under the perturbation of fractional Bragg reflection from a periodically-poled nonlinear crystal. Counterintuitively, pronounced mode splitting in the spectral domain could been observed even with a tiny intensity reflection of 0.0003. The breaking of running-wave operation in the ring-cavity configuration resulted in comparable circulating fields in forward- and counter-propagation directions, which thus dramatically reduced the enhancing factor for the resonating field. In contrast, a linear cavity with intrinsically bidirectional operation was immune to the small intra-cavity reflection. Therefore, the linear-cavity layout could provide an expedient solution for a given internal reflection to obtain more stable and higher enhancement, which was confirmed by comparative studies of mid-infrared generation based on pump-enhanced difference frequency conversion. The underlying mechanism was further modeled by numerical simulations, which agreed well with experimental results. These findings could not only shed light on the understanding of the exotic feature of concatenated optical cavities, but also provide a useful guide to practical design of enhancement cavities for cavity-based frequency conversion with periodically-poled nonlinear crystals.

physics.optics↗

arXiv2026

Controlled generation of ultrafast vector vortex beams from a mode-locked fiber laser

We report on a new class of mode-locked fiber laser that allows direct creation of ultrafast vector vortex beams at arbitrary positions on the higher-order Poincar\'{e} sphere. The on-demand generation of space-variant polarization patterns was realized by controlling geometric phases inside the laser resonator to map polarization to orbital angular momentum. Thanks to the ingenious cavity design, the required intracavity manipulation of the geometric phase imposed no disturbance on the passively mode-locked operation, thus demonstrating robust and flexible switching of vectorial modes with a 8.5-ps pulse duration. Analytical expressions were deduced to model the generated cylindrically-symmetric polarization profiles, and agreed exceedingly well with experimental observations. The presented fiber laser would constitute a compact light source for producing ultrafast pulses in high-purity structured modes, which may find broad applications in classical and quantum optics.

physics.optics↗

arXiv2026

Passively synchronized dual-color mode-locked fiber lasers based on nonlinear amplifying loop mirrors

We have proposed and implemented a novel scheme for passive all-optical synchronization between erbium and ytterbium mode-locked fiber lasers. The passive locking of repetition rates for the dual-color pulses was realized by cross-phase modulation within phase-biased nonlinear amplifying loop mirrors. In contrast to previous demonstrations, the synchronization system was configured in an all-polarization-maintaining structure, thus gaining substantially improved stability and robustness. Consequently, the maximum tolerance of cavity-length mismatch of 16.2 mm was achieved unprecedentedly, which was at least one order of magnitude longer than previously reported results for comparable temporal durations of involved pulses. The corresponding relative timing jitter was measured to be 31 fs within 1-MHz bandwidth. Such tight and robust synchronization fiber laser system offers a great potential for various applications, such as pump-probe microscopy, Raman scattering spectroscopy and nonlinear frequency generation.

physics.optics↗

arXiv2026

Highly efficient difference-frequency generation for mid-infrared pulses by passively synchronous seeding

We have proposed and experimentally demonstrated a novel scheme for efficient mid-infrared difference-frequency generation based on passively synchronized fiber lasers. The adoption of coincident seeding pulses in the nonlinear conversion process could substantially lower the pumping threshold for mid-infrared parametric emission. Consequently, a picosecond mid-infrared source at 3.1 $\mu$m was prepared with watt-level average power, and a maximum power conversion efficiency of 77\% was realized from pump to down-converted light. Additionally, the long-term stability of generated power was manifested with a relative fluctuation as low as 0.17\% over one hour. Thanks to the all-optical passive synchronization and all-polarization-maintaining fiber architecture, the implemented laser system was also featured with simplicity, compactness and robustness, which would favor subsequent applications beyond laboratory operation.

physics.optics↗

arXiv2026

Coincidence-pumping upconversion detector based on passively synchronized fiber laser system

We experimentally demonstrated a high-performance frequency upconversion detector for telecom-band photons based on a passively synchronized fiber laser system. The involved coincidence pumping technique enabled to spectrally convert the pulsed infrared photons into the visible regime with a conversion efficiency of 72\%. The overall detection efficiency of the upconversion detector reached to 30\% with a low noise equivalent power of $3\times10^{-17}\ \text{W/Hz}^{1/2}$. In contrast to previous demonstrations, the whole upconversion detection system was constructed in an all-polarization-maintaining fiber structure, thus favoring substantial improvement of compactness and robustness. Moreover, the long-term stability was manifested by at least ten-hour operation with a relative fluctuation of count rates as small as 0.26\%. The achieved features here would be desirable in many practical applications requiring efficient and robust coherent manipulation of pulsed optical fields by nonlinear frequency conversion.

physics.optics↗

arXiv2026

Mid-infrared photon counting and resolving via efficient frequency upconversion

Optical detectors with single-photon sensitivity and large dynamic range would facilitate a variety of applications. Especially, the capability of extending operation wavelengths into the mid-infrared region is highly attractive. Here we implement a mid-infrared frequency upconversion detector for counting and resolving photons at 3 $\mu$m. Thanks to the spectro-temporal engineering of the involved optical fields, the mid-infrared photons could be spectrally translated into the visible band with a conversion efficiency of 80\%. In combination with a silicon avalanche photodiode, we obtained unprecedented performances with a high overall detection efficiency of 37\% and a low noise equivalent power of 1.8$\times$10$^{-17}$ W/Hz$^{1/2}$. Furthermore, photon-number-resolving detection at mid-infrared wavelengths was demonstrated, for the first time to our knowledge, with a multi-pixel photon counter. The implemented upconversion detector exhibited a maximal resolving photon number up to 9 with a noise probability per pulse of 0.14\% at the peak detection efficiency. The achieved photon counting and resolving performance might open up new possibilities in trace molecule spectroscopy, sensitive biochemical sensing, and free-space communications, among others.

physics.optics↗

arXiv2026

Wide-field mid-infrared single-photon upconversion imaging

Frequency upconversion technique, where the infrared signal is nonlinearly translated into the visible band to leverage the silicon sensors, offers a promising alternation for the mid-infrared (MIR) imaging. However, the intrinsic field of view (FOV) is typically limited by the phase-matching condition, thus imposing a remaining challenge to promote subsequent applications. Here, we demonstrate a wide-field upconversion imaging based on the aperiodic quasi-phase-matching configuration. The acceptance angle is significantly expanded to about 30$^\circ$, over tenfold larger than that with the periodical poling crystal. The extended FOV is realized in one shot without the need of parameter scanning or post-processing. Consequently, a fast snapshot allows to facilitate high-speed imaging at a frame rate up to 216 kHz. Alternatively, single-photon imaging at room temperature is permitted due to the substantially suppressed background noise by the spectro-temporal filtering. Furthermore, we have implemented high-resolution time-of-flight 3D imaging based on the picosecond optical gating. These presented MIR imaging features with wide field, fast speed, and high sensitivity might stimulate immediate applications, such as non-destructive defect inspection, in-vivo biomedical examination, and high-speed volumetric tomography.

physics.optics↗

arXiv2026

Highly sensitive detection for infrared photons by non-degenerate two-photon absorption under mid-infrared pumping

We have demonstrated highly-sensitive photon counting in the infrared based on the two-photon absorption (2PA) in a silicon avalanche photodiode, where the required photon energy for inducing effective conductivity was provided by an intense mid-infrared (MIR) field at 3 $\mu$m. The used MIR pumping scheme could not only benefit from the enhanced 2PA coefficient in the non-degenerate regime, but also eliminate the detrimental background noises due to the pump harmonic excitation of the pump. Consequently, the enhancement factor for the signal counting rate unprecedented reached to about $10^{5}$ with input infrared pulses at the femtojoule level. Additionally, the noise equivalent power was substantially improved by two orders of magnitude comparing to conventional schemes with near-infrared pumping. Therefore, the presented configuration might provide an alternative to realize sensitive infrared detection and imaging with desirable features of room-temperature operation, no phase-matching requirement, and broadband responding window, which would find a variety of applications including remote ranging, sensitive sensing, biochemical imaging, and trace spectroscopy.

physics.optics↗

arXiv2026

Passive repetition-rate stabilization for a mode-locked fiber laser by electro-optic modulation

We report a passive stabilization of the repetition rate for a mode-locked fiber laser by using an electro-optic modulator in a phase-biased nonlinear amplifying loop mirror. The underlying mechanism, in contrast to active feedback operations, lies in the cross-phase modulation between electrical and optical pulses within an electro-optic crystal. The resulting spectral shift can automatically compensate the cavity-length drift via the group velocity dispersion. Consequently, the artificial actuator enables to obtain a capture range up to 2.3 mm, much longer than that achieved by index changes of the modulator. A robust and tight locking for the repetition rate is then realized with a standard deviation as low as 9 $\mu$Hz with a 1-s sample time over 11 hours, corresponding to a fractional instability of 4.3$\times$10$^{-13}$. Furthermore, a dynamic optical sampling by repetition-rate tuning has been manifested with a fast refresh rate at 100 kHz and a broad scanning range over 305 ps. The demonstrated passive servo action may provide a simple yet effective way to stabilize the repetition rate with high precision, large bandwidth and wide tunability.

physics.optics↗

arXiv2026

Mid-Infrared Single-Photon Edge Enhanced Imaging based on Nonlinear Vortex Filtering

Edge enhanced imaging via the spiral phase contrast enables to reveal the phase or amplitude gradients of a target, which has been proved useful in feature recognition, machine vision, and object identification. A long quest is to extend the operation wavelength into the mid-infrared (MIR) region, as highly demanded in various fields including infrared sensing, astronomic observation, and biomedical diagnosis. Here, we demonstrated ultra-sensitive MIR imaging at the single-photon level based on nonlinear frequency upconversion, where the spectrally converted replica of the MIR object image at 3070 nm was captured by a silicon electron multiplying charged coupled device. The imaging sensitivity was significantly improved by the coincidence pulsed pumping with a spectro-temporal optimization. Furthermore, the edge enhancement has been realized by imprinting the spiral phase pattern of the pump onto the upconverted field at the Fourier plane within the nonlinear crystal. Such a nonlinear spatial filter not only provided an effective way to implement the required high-fidelity vortex screening in the edge enhanced detection, but also rendered the MIR illumination into a visible image in an efficient and low-noise fashion. The presented system for MIR edge enhanced imaging might facilitate immediate applications in label-free histopathological diagnosis and non-destructive defect inspection.

physics.optics↗

arXiv2026

Single-Photon Infrared Imaging with a Silicon Camera Based on Long-Wavelength-Pumping Two-Photon Absorption

We experimentally demonstrated an ultra-sensitive imaging system for telecom photons based on the non-degenerate two-photon absorption in a silicon-based electron multiplying charge-coupled device (EMCCD). The proposed long-wavelength-pumping scheme with mid-infrared pulsed excitation could not only effectively increase the two-photon absorption coefficient, but also significantly suppress the background noise caused by the harmonic absorption of the strong pumping field. In comparison to the photoelectric response via the degenerate two-photon absorption, the implemented configuration could offer over 30-folded enhancement of the photon-counting rate in the infrared imaging. The resulting detection sensitivity up to 1 photon/pixel/pulse was unprecedentedly approached, thus facilitating the single-photon operation. The elimination of the stringent phase matching as typically required in the optical parametric conversion has led to a high spatial resolution of 13 $\mu$m. Moreover, the on-chip nonlinearity of the optical imager would enable a broadband spectral window and an enlarged field of view. In combination with the 5-ps temporal resolution due to the coincident optical gating, the presented imaging system would find various promising applications, such as low-light fluorescence lifetime microscopy and photon counting time-of-flight 3D imaging.

physics.optics↗

arXiv2026

High-precision passive stabilization of repetition rate for a mode-locked fiber laser based on optical pulse injection

We have proposed and implemented a novel scheme to obtain high-precision repetition rate stabilization for a polarization-maintaining mode-locked fiber laser. The essential technique lies in the periodic injection of electronically modulated optical pulses into a nonlinear amplifying loop mirror within the laser resonator. Thanks to the nonlinear cross-phase modulation effect, the injected pulses referenced to an external clock serves as a stable and precise timing trigger for an effective intensity modulator. Consequently, synchronous mode-locking can be initiated to output ultrafast pulses with a passively stabilized repetition rate. The capture range of the locking system reaches to a record of 1 mm, which enables a long-term stable operation over 15 hours without the need of temperature stabilization and vibration isolation. Meanwhile, the achieved standard deviation is as low as 100 $\mu$Hz with a 1-s sample time, corresponding to a fluctuation instability of 5.0$\times10^{-12}$. Additionally, the repetition rate stabilization performance based on the passive synchronization has been systematically investigated by varying the average power, central wavelength and pulse duration of the optical injection.

physics.optics↗