arXiv subjects

Hidenori Hiramatsu

Publications and source records attributed to Hidenori Hiramatsu.

At least 37 records · Page 2Linked to original sources

arXiv2016

Enhanced critical-current in P-doped BaFe2As2 thin films on metal substrates arising from poorly aligned grain boundaries

Thin films of the iron-based superconductor BaFe2(As1-xPx)2 (Ba122:P) were fabricated on polycrystalline metal-tape substrates with two kinds of in-plane grain boundary alignments (well aligned (4 deg.) and poorly aligned (8 deg.)) by pulsed laser deposition. The poorly aligned substrate is not applicable to cuprate-coated conductors because the in-plane alignment >4 deg. results in exponential decay of the critical current density (Jc). The Ba122:P film exhibited higher Jc at 4 K when grown on the poorly aligned substrate than on the well-aligned substrate even though the crystallinity was poorer. It was revealed that the misorientation angles of the poorly aligned samples were less than 6 deg., which are less than the critical angle of an iron-based superconductor, cobalt-doped BaFe2As2 (~9 deg.), and the observed strong pinning in the Ba122:P is attributed to the high-density grain boundaries with the misorientation angles smaller than the critical angle. This result reveals a distinct advantage over cuprate-coated conductors because well-aligned metal-tape substrates are not necessary for practical applications of the iron-based superconductors.

cond-mat.supr-con↗

arXiv2016

Novel solid-phase epitaxy for multi-component materials with extremely high vapor pressure elements: An application to KFe2As2

We propose a novel solid-phase epitaxy technique applicable to high annealing temperatures up to 1000 C without re-vaporization of alkali metal elements with high vapor pressures. This technique is demonstrated through the successful growth of high-quality KFe2As2 epitaxial films. The key factors are employing a custom-designed alumina vessel/cover and sealing it in a stainless tube with a large amount of atmospheric KFe2As2 powder in tightly closed sample spaces. This technique can also be effective for other materials composed of elements with very high vapor pressures, such as alkali metals, and can lead to the realization of spintronics devices in the future using KFe2As2.

cond-mat.mtrl-sci↗

arXiv2016

Electric field-induced superconducting transition of insulating FeSe thin film at 35 K

It is thought that strong electron correlation in an insulating parent phase would enhance a critical temperature (Tc) of superconductivity in a doped phase via enhancement of the binding energy of a Cooper pair as known in high-Tc cuprates. To induce a superconductor transition in an insulating phase, injection of a high density of carriers is needed (e.g., by impurity doping). An electric double-layer transistor (EDLT) with an ionic liquid gate insulator enables such a field-induced transition to be investigated and is expected to result in a high Tc because it is free from deterioration in structure and carrier transport that are in general caused by conventional carrier doping (e.g., chemical substitution). Here, for insulating epitaxial thin films (~10 nm thick) of FeSe, we report a high Tc of 35 K, which is four times higher than that of bulk FeSe, using an EDLT under application of a gate bias of +5.5 V. Hall effect measurements under the gate bias suggest that highly accumulated electron carrier in the channel, whose area density is estimated to be 1.4x10^15 cm-2 (the average volume density of 1.7x10^21 cm-3), is the origin of the high-Tc superconductivity. This result demonstrates that EDLTs are useful tools to explore the ultimate Tc for insulating parent materials.

cond-mat.supr-con↗

arXiv2015

Exploration of new superconductors and functional materials and fabrication of superconducting tapes and wires of iron pnictides

This paper reviews the highlights of a 4-years-long research project supported by the Japanese Government to explore new superconducting materials and relevant functional materials. The project found several tens of new superconductors by examining ~1000 materials, each of which was chosen by Japanese team member experts with a background in solid state chemistry. This review summarizes the major achievements of the project in newly found superconducting materials, and the wire and tape fabrication of iron-based superconductors. It is a unique feature of this review to incorporate a list of ~700 unsuccessful materials examined for superconductivity in the project. In addition, described are new functional materials and functionalities discovered during the project.

cond-mat.supr-con↗

arXiv2015

Narrow Bandgap in beta-BaZn2As2 and Its Chemical Origins

Beta-BaZn2As2 is known to be a p-type semiconductor with the layered crystal structure similar to that of LaZnAsO, leading to the expectation that beta-BaZn2As2 and LaZnAsO have similar bandgaps; however, the bandgap of beta-BaZn2As2 (previously-reported value ~0.2 eV) is one order of magnitude smaller than that of LaZnAsO (1.5 eV). In this paper, the reliable bandgap value of beta-BaZn2As2 is determined to be 0.23 eV from the intrinsic region of the tem-perature dependence of electrical conductivity. The origins of this narrow bandgap are discussed based on the chemi-cal bonding nature probed by 6 keV hard X-ray photoemission spectroscopy, hybrid density functional calculations, and the ligand theory. One origin is the direct As-As hybridization between adjacent [ZnAs] layers, which leads to a secondary splitting of As 4p levels and raises the valence band maximum. The other is that the non-bonding Ba 5dx2-y2 orbitals form unexpectedly deep conduction band minimum (CBM) in beta-BaZn2As2 although the CBM of LaZnAsO is formed mainly of Zn 4s. These two origins provide a quantitative explanation for the bandgap difference between beta-BaZn2As2 and LaZnAsO.

physics.chem-ph↗

arXiv2015

n-type conversion of SnS by isovalent ion substitution: Geometrical doping as a new doping route

Tin monosulfide (SnS) is a naturally p-type semiconductor with a layered crystal structure, but no reliable n-type SnS has been obtained by conventional aliovalent ion substitution. In this work, carrier polarity conversion to n-type was achieved by isovalent ion substitution for polycrystalline SnS thin films on glass substrates. Substituting Pb2+ for Sn2+ converted the majority carrier from hole to electron, and the free electron density ranged from 1012 to 1015 cm-3 with the largest electron mobility of 7.0 cm2/(Vs). The n-type conduction was confirmed further by the position of the Fermi level (EF) based on photoemission spectroscopy and electrical characteristics of pn heterojunctions. Density functional theory calculations reveal that the Pb substitution invokes a geometrical size effect that enlarges the interlayer distance and subsequently reduces the formation energies of Sn and Pb interstitials, which work as electron donors.

cond-mat.mtrl-sci↗

arXiv2014

High critical-current density with less anisotropy in BaFe2(As,P)2 epitaxial thin films: Effect of intentionally grown c-axis vortex-pinning centers

We report herein a high and isotropic critical-current density Jc for BaFe2(As,P)2 epitaxial films. The isotropy of Jc with respect to the magnetic-field direction was improved significantly by decreasing the film growth rate to 2.2 Å/s. The low growth rate served to preferentially align dislocations along the c-axis, which work well as c-axis vortex-pinning centers. Because of the intentional introduction of effective pinning, the absolute Jc at 9 T was larger than that obtained for other iron-based superconductors and conventional alloy superconducting wires.

cond-mat.supr-con↗

arXiv2014

Critical factor for epitaxial growth of cobalt-doped BaFe2As2 films by pulsed laser deposition

We heteroepitaxially grew cobalt-doped BaFe2As2 films on (La,Sr)(Al,Ta)O3 single-crystal substrates by pulsed laser deposition using four different wavelengths and investigated how the excitation wavelength and pulse energy affected growth. Using the tilting and twisting angles of X-ray diffraction rocking curves, we quantitatively analyzed the crystallinity of each film. We found that the optimal deposition rate, which could be tuned by pulse energy, was independent of laser wavelength. The high-quality film grown at the optimal pulse energy (i.e., the optimum deposition rate) exhibited high critical current density over 1 MA/cm2 irrespective of the laser wavelength.

cond-mat.supr-con↗

arXiv2014

Electric double-layer transistor using layered iron selenide Mott insulator TlFe1.6Se2

A1-xFe2-ySe2 (A = K, Cs, Rb, Tl) are recently discovered iron-based superconductors with critical temperatures (Tc) ranging up to 32 K. Their parent phases have unique properties when compared with other iron-based superconductors; e.g., their crystal structures include ordered Fe vacancies, their normal states are antiferromagnetic (AFM) insulating phases, and they have extremely high Néel transition temperatures. However, control of carrier doping into the parent AFM insulators has been difficult due to their intrinsic phase separation. Here, we fabricated an Fe-vacancy-ordered TlFe1.6Se2 insulating epitaxial film with an atomically flat surface and examined its electrostatic carrier doping using an electric double-layer transistor (EDLT) structure with an ionic liquid gate. The positive gate voltage gave conductance modulation of three orders of magnitude at 25 K, and further induced and manipulated a phase transition; i.e., delocalized carrier generation by electrostatic doping is the origin of the phase transition. This is the first demonstration, to the authors' knowledge, of an EDLT using a Mott insulator iron-selenide channel and opens a way to explore high-Tc superconductivity in iron-based layered materials, where carrier doping by conventional chemical means is difficult.

cond-mat.mtrl-sci↗

arXiv2013

Epitaxial Growth and Electronic Structure of a Layered Zinc Pnictide Semiconductor, beta-BaZn2As2

BaZn2As2 is expected for a good p-type semiconductor and has two crystalline phases of an orthorhombic alpha phase and a higher-symmetry tetragonal beta phase. Here, we report high-quality epitaxial films of the tetragonal beta-BaZn2As2 were grown on single-crystal MgO (001) substrates by a reactive solid-phase epitaxy technique. Out-of-plane and in-plane epitaxial relationships between the film and the substrate were BaZn2As2 (00l)//MgO (001) and BaZn2As2 [200]//MgO [200], respectively. The full-widths at half maximum were 0.082o for a 008 out-of-plane rocking curve and 0.342o for a 200 in-plane rocking curve. A step-and-terrace structure was observed by atomic force microscopy. The band gap of beta-BaZn2As2 was evaluated to be around 0.2 eV, which is much smaller than that of a family compound LaZnOAs (1.5 eV). Density functional theory calculation using the Heyd-Scuseria-Ernzerhof hybrid functionals supports the small band gap.

cond-mat.mtrl-sci↗

arXiv2013

Unusual pressure effects on the superconductivity of indirectly electron-doped (Ba1-xLax)Fe2As2 epitaxial films

Applying an external pressure to indirectly electron-doped 122-type (Ba1-xLax)Fe2As2 epitaxial films enhances the superconducting critical temperature (Tc) up to 30.3 K. Different from the other family compounds, the Tc is enhanced not only in the under-doped region but also in the optimally doped and over-doped regions. Narrowing of the superconducting transition width and an increase in the carrier density take place simultaneously in the whole doping region, except at the heavily over-doped limit. This characteristic is unique to and observed only in (Ba1-xLax)Fe2As2, in which the La doping is stabilized via non-equilibrium growth of the vapor phase epitaxy, among the 122-type iron-based superconductors, AFe2As2 (A = Ba, Sr, and Ca).

cond-mat.supr-con↗

arXiv2013

Magnetic scattering and electron pair breaking by rare-earth-ion substitution in BaFe2As2 epitaxial films

The effect of electron doping by trivalent charge state rare-earth ion (RE = La, Ce, Pr, and Nd) substitutions on the superconductivity in BaFe2As2 was examined using epitaxial films. Each of the RE substitutions suppressed the resistivity anomaly associated with the magnetic/structural phase transitions, leading to the resistivity drops and superconductivity transitions. Bulk superconductivity was observed at the maximum onset critical temperature (Tconset) of 22.4 K for La-doping and 13.4 K for Ce-doping, while only broad resistivity drops were observed at 6.2 K for Pr-doping and 5.8 K for Nd-doping but neither zero resistivity nor distinct Meissner effect were observed at least down to 2 K. The decrease in Tconset with increasing the number of RE 4f electrons cannot be explained in terms of the crystalline qualities or crystallographic structure parameters of the BaFe2As2 films. It was clarified, based on resistivity-temperature analyses, that magnetic scattering became increasingly significant in the above order of the RE dopants. The negative magnetoresistance was enhanced by the Ce- and Pr-doping, implying that the decrease in Tc originates from magnetic pair breaking by interaction of the localized 4f orbitals in the RE dopants with the itinerant Fe 3d orbitals.

cond-mat.supr-con↗

arXiv2013

Anomalous scaling behavior in a mixed-state Hall effect of a cobalt-doped BaFe2As2 epitaxial film with a high critical current density over 1 MA/cm2

The mixed-state Hall effect was examined in a Ba(Fe1-xCox)2As2 epitaxial film with a high critical current density. The transverse resistivity ρxy and the longitudinal resistivity ρxx follow power law scaling ρxy = Aρxxβ. In the temperature-sweep with a fixed field (T sweep), all of the β values are independent of magnetic field up to 9 T, and are lower than 2.0 (around 1.8). In contrast, the β values in the magnetic-field sweep with a fixed temperature (H sweep) change from 1.8 to 2.0 as the temperature increases from 13 to 16 K even in the T/H region that overlaps with the T sweep measurements. These results indicate that the vortices introduced at low temperatures are trapped by strong pinning centers, but a portion of the vortices introduced at high temperatures are not strongly trapped by the pinning centers. The sign of ρxy is negative, and a sign reversal is not detected. These distinct scaling behaviors, which sharply contrast cuprates and MgB2, are explained by high-density c-axis pinning centers in the Ba(Fe1-xCox)2As2 epitaxial film and are consistent with a wider vortex liquid phase.

cond-mat.supr-con↗

arXiv2013

Superconducting Properties and Phase Diagram of Indirectly Electron-Doped (Sr1-xLax)Fe2As2 Epitaxial Films Grown by Pulsed Laser Deposition

A non-equilibrium phase (Sr1-xLax)Fe2As2 was formed by epitaxial film-growth. The resulting films emerged superconductivity along with suppression of the resistivity anomaly that is associated with magnetic and structural phase transitions. The maximum critical temperature was 20.8 K, which is almost the same as that of directly electron-doped Sr(Fe1-xCox)2As2. Its electronic phase diagram is much similar to that of Sr(Fe1-xCox)2As2, indicating that the difference in the electron doping sites does not influence the superconducting properties of 122-type SrFe2As2.

cond-mat.supr-con↗

arXiv2012

Thin film growth by pulsed laser deposition and properties of 122-type iron-based superconductor AE(Fe1--xCox)2As2 (AE = alkaline earth)

This paper reports comprehensive results on thin-film growth of 122-type iron-pnictide superconductors, AE(Fe1-xCox)2As2 (AE = Ca, Sr, and Ba, AEFe2As2:Co) by a pulsed laser deposition method using a neodymium-doped yttrium aluminum garnet laser as an excitation source. The most critical parameter to produce the SrFe2As2:Co and BaFe2As2:Co phases is the substrate temperature (Ts). It is difficult to produce highly-pure CaFe2As2:Co phase thin film at any Ts. For BaFe2As2:Co epitaxial films, controlling Ts at 800-850 °C and growth rate to 2.8-3.3 Å/s produced high-quality films with good crystallinity, flat surfaces, and high critical current densities > 1 MA/cm2, which were obtained for film thicknesses from 100 to 500 nm. The doping concentration x was optimized for Ba(Fe1-xCox)2As2 epitaxial films, leading to the highest critical temperature of 25.5 K in the epitaxial films with the nominal x = 0.075.

cond-mat.supr-con↗

arXiv2012

Identical effects of indirect and direct electron doping of superconducting BaFe2As2 thin films

Electron doping of a 122-type iron pnictide BaFe2As2 by substituting the Ba site with an aliovalent ion (indirect doping), which had been unsuccessful by conventional solid-state synthesis methods, was achieved by a non-equilibrium film growth process. The substitution with La was substantiated by a systematic shrinkage of the c-axis lattice parameter due to the smaller ionic radius of La3+ than that of Ba2+. A negative Hall coefficient indicated that the majority carriers were electrons, as is consistent with this aliovalent ion doping. The La substitution suppressed an antiferromagnetic transition and induced bulk superconductivity at a maximum onset critical temperature (Tc) of 22.4 K. The electronic phase diagram for (Ba1-xLax)Fe2As2 was built, which revealed that the indirect electron doping at the Ba site with La [(Ba1-xLax)Fe2As2] exhibits almost the same Tc - doping level relation as that of the direct electron-doping at the Fe site with Co [Ba(Fe1-xCox)2As2]. This finding clarified that Tc in 122-type compounds is not affected by a crystallographic doping site, which is in sharp contrast to the 1111-type compounds, REFeAsO (RE = rare earth). It is tentatively attributed to the differences in their dimensionality of electronic structures and electron pairing symmetries.

cond-mat.supr-con↗

arXiv2012

Ultralow-dissipative conductivity by Dirac fermions in BaFe$_2$As$_2$

We report on the anomalous behavior of the complex conductivity of BaFe$_{2}$As$_{2}$, which is related to the Dirac cone, in the terahertz (THz)-frequency region. Above the spin-density-wave (SDW) transition temperature, the conductivity spectra follow the Drude model. In the SDW state, the imaginary part of the complex conductivity, $σ_2$, is suppressed in comparison to that expected according to the Drude model. The real part, $σ_1$, exhibits nearly Drude-like behavior. This behavior (i.e., almost no changes in $σ_1$ and the depression of $σ_2$) can be regarded as the addition of extra conductivity without any dissipations in the Drude-type conductivity. The origin of this ultralow-dissipative conductivity is found to be due to conductivity contribution from quasiparticles within the Dirac cone. In other words, we are able to observe the dynamics of Dirac fermions through the conductivity spectra of BaFe$_2$As$_2$, clearly and directly.

cond-mat.supr-con↗

arXiv2011

Thin Film Growth and Device Fabrication of Iron-Based Superconductors

Iron-based superconductors have received much attention as a new family of high-temperature superconductors owing to their unique properties and distinct differences from cuprates and conventional superconductors. This paper reviews progress in thin film research on iron-based superconductors since their discovery for each of five material systems with an emphasis on growth, physical properties, device fabrication, and relevant bulk material properties.

cond-mat.supr-con↗