Searcharxiv⌕ Search

arXiv subjects

Hidetomo Usui

Publications and source records attributed to Hidetomo Usui.

53 records · Page 3Linked to original sources

Pudding-mold type band in a potential thermoelectric material CuAlO$_2$ : comparison with Na$_x$CoO$_2$

A potential thermoelectric material CuAlO$_2$ is theoretically studied. We first construct a model Hamiltonian of CuAlO$_2$ based on the first principles band calculation, and calculate the Seebeck coefficient. Then, we compare the model with that of a well-known thermoelectric material Na$_x$CoO$_2$, and discuss the similarities and the differences. It is found that the two materials are similar from an electronic structure viewpoint in that they have a peculiar pudding-mold type band shape, which is advantageous as thermoelectric materials. There are however some differences, and we analyze the origin of the difference from a microscopic viewpoint. The band shape of CuAlO$_2$ is found to be even more ideal than that of Na$_x$CoO$_2$, and we predict that once a significant amount of holes is doped in CuAlO$_2$, thermoelectric properties (especially the power factor) even better than that of Na$_x$CoO$_2$ can be expected.

cond-mat.mtrl-sci↗

Minimal electronic models for superconducting BiS$_2$ layers

We construct minimal electronic models for a newly discovered superconductor LaO$_{1-x}$F$_x$BiS$_2$ ($T_c=$ 10.6K) possessing BiS$_2$ layers based on first principles band calculation. First, we obtain a model consisting of two Bi $6p$ and two S $3p$ orbitals, which give nearly electron-hole symmetric bands. Further focusing on the bands that intersect the Fermi level, we obtain a model with two $p$ orbitals. The two bands (per BiS$_2$ layer) have quasi-one-dimensional character with a double minimum dispersion, which gives good nesting of the Fermi surface. At around $x\sim 0.5$ the topology of the Fermi surface changes, so that the density of states at the Fermi level becomes large. Possible pairing states are discussed.

cond-mat.supr-con↗

Large Seebeck effect in the electron-doped FeAs$_2$ driven by quasi one dimensional pudding-mold type band

We investigate the thermoelectric propeties of the electron-doped FeAs$_2$ both experimentally and theoretically. Electrons are doped by partially substituting Se for As, which leads to a metallic behavior in the resistivity. A Seebeck coefficient of about $-$200 $μ$V/K is reached at 300 K for 1% doping, and about $-$120 $μ$V/K even at 5% doping. The origin of this large Seebeck coefficient despite the metallic conductivity is analyzed from a band structure point of view. The first-principles band calculation reveals the presence of a pudding-mold type band just above the band gap, somewhat similar to Na$_x$CoO$_2$, but with a quasi-one-dimensional nature. We calculate the Seebeck coefficient using a tightbinding model that correctly reproduces this band structure, and this gives results close to the experimental observations. The origin of this peculiar band shape is also discussed.

cond-mat.mtrl-sci↗

First-principles band structure and FLEX approach to the pressure effect on $T_c$ of the cuprate superconductors

High-temperature cuprate superconductors have been known to exhibit significant pressure effects. In order to fathom the origin of why and how Tc is affected by pressure, we have recently studied the pressure effects on Tc adoptig a model that contains two cupper d-orbitals derived from first-principles band calculations, where the dz2 orbital is considere on top of the usually considered dx2-y2 orbital. In that paper, we have identified two origins for the Tc enhancement under hydrostatic pressure: (i) while at ambient pressure the smaller the hybridization of other orbital components the higher the Tc, an application of pressure acts to reduce the multiorbital mxing on the Fermi surface, which we call the orbital distillation effects, and (ii) the increase of the band width with pressure also contributes to the enhancement. In the present paper, we further elabolrate the two points. As for point (i), while the reduction of the apical oxygen height under pressure tends to increase the dz2 mixture, hence to lower Tc, here we show that this effect is strongly reduced in bi-layer materials due to the pyramidal coordination of oxygen atoms. As for point (ii), we show that the enhancement of Tc due to the increase in the band width is caused by the effect that the many-body renormalization arising from the self-energy is reduced.

cond-mat.supr-con↗

Multiorbital analysis of the effects of uniaxial and hydrostatic pressure on $T_c$ in the single-layered cuprate superconductors

The origin of uniaxial and hydrostatic pressure effects on $T_c$ in the single-layered cuprate superconductors is theoretically explored. A two-orbital model, derived from first principles and analyzed with the fluctuation exchange approximation gives axial-dependent pressure coefficients, $\partial T_c/\partial P_a>0$, $\partial T_c/\partial P_c<0$, with a hydrostatic response $\partial T_c/\partial P>0$ for both La214 and Hg1201 cuprates, in qualitative agreement with experiments. Physically, this is shown to come from a unified picture in which higher $T_c$ is achieved with an "orbital distillation", namely, the less the $d_{x^2-y^2}$ main band is hybridized with the $d_{z^2}$ and $4s$ orbitals higher the $T_c$. Some implications for obtaining higher $T_c$ materials are discussed.

cond-mat.supr-con↗

Corrugated flat band as an origin of large thermopower in hole doped PtSb$_2$

The origin of the recently discovered large thermopower in hole-doped PtSb$_2$ is theoretically analyzed based on a model constructed from first principles band calculation. It is found that the valence band dispersion has an overall flatness combined with some local ups and downs, which gives small Fermi surfaces scattered over the entire Brillouin zone. The Seebeck coefficient is calculated using this model, which gives good agreement with the experiment. We conclude that the good thermoelectric property originates from this "corrugated flat band", where the coexistence of large Seebeck coefficient and large electric conductivity is generally expected.

cond-mat.mtrl-sci↗

Novel BiS2-based layered superconductor Bi4O4S3

Exotic superconductivity has often been discovered in materials with a layered (two-dimensional) crystal structure. The low dimensionality can affect the electronic structure and can realize high transition temperatures (Tc) and/or unconventional superconductivity mechanisms. As standard examples, we now have two types of high-Tc superconductors. The first group is the Cu-oxide superconductors whose crystal structure is basically composed of a stacking of spacer (blocking) layers and superconducting CuO2 layers.1-4 The second group is the Fe-based superconductors which also possess a stacking structure of spacer layers and superconducting Fe2An2 (An = P, As, Se, Te) layers.5-13 In both systems, dramatic enhancements of Tc are achieved by optimizing the spacer layer structure, for instance, a variety of composing elements, spacer thickness, and carrier doping levels with respect to the superconducting layers. In this respect, to realize higher-Tc superconductivity, other than Cu-oxide and Fe-based superconductors, the discovery of a new prototype of layered superconductors needs to be achieved. Here we show superconductivity in a new bismuth-oxysulfide layered compound Bi4O4S3. Crystal structure analysis indicates that this superconductor has a layered structure composed of stacking of Bi4O4(SO4)1-x and Bi2S4 layers; the parent compound (x = 0) is Bi6O8S5. Band calculation suggests that Bi4O4S3 (x = 0.5) is metallic while Bi6O8S5 (x = 0) is a band insulator with Bi3+. Furthermore, the Fermi level for Bi4O4S3 is just on the peak position of the partial density of states of the Bi 6p orbital within the BiS2 layer. The BiS2 layer is a basic structure which provides another universality class for layered superconducting family, and this opens up a new field in the physics and chemistry of low-dimensional superconductors.

cond-mat.supr-con↗

Least momentum space frustration as a condition for "high $T_c$ sweet spot" in the iron-based superconductors

In the present paper, we describe how the band structure and the Fermi surface of the iron-based superconductors vary as the Fe-As-Fe bond angle changes. We discuss how these Fermi surface configurations affect the superconductivity mediated by spin fluctuations, and show that in several situations, frustration in the sign of the gap function arises due to the repulsive pairing interactions that requires sign change of the order parameter. Such a frustration can result in nodes or very small gaps, and generally works destructively against superconductivity. Conversely, we propose that the optimal condition for superconductivity is realized for the Fermi surface configuration that gives the least frustration while maximizing the Fermi surface multiplicity. This is realized when there are three hole Fermi surfaces, where two of them have $d_{XZ/YZ}$ orbital character and one has $d_{X^2-Y^2}$ {\it for all $k_z$} in the three dimensional Brillouin zone. Looking at the band structures of various iron-based superconductors, the occurrence of such a "sweet spot" situation is limited to a narrow window.

cond-mat.supr-con↗

Spin fluctuations and unconventional pairing in KFe$_2$As$_2$

We study the relation between the spin fluctuation and superconductivity in an heavily hole doped end material KFe$_2$As$_2$. We construct a five orbital model by approximately unfolding the Brillouin zone of the three dimensional ten orbital model obtained from first principles calculation. By applying the random phase approximation, we obtain the spin susceptibility and solve the linearized Eliashberg equation. The incommensurate spin fluctuation observed experimentally is understood as originating from interband interactions, where the multiorbital nature of the band structure results in an electron-hole asymmetry of the incommensurability in the whole iron-based superconductor family. As for superconductivity, s-wave and d-wave pairings are found to be in close competition, where the sign change in the gap function in the former is driven by the incommensurate spin fluctuations. We raise several possible explanations for the nodes in the superconducting gap of KFe$_2$As$_2$ observed experimentally.

cond-mat.supr-con↗

Maximizing Fermi surface multiplicity optimizes superconductivity in iron pnictides

We study the condition for optimizing superconductivity in the iron pnictides from the lattice structure point of view. Studying the band structure of the hypothetical lattice structure of LaFeAsO, the hole Fermi surface multiplicity is found to be maximized around the Fe-As-Fe bond angle regime where the arsenic atoms form a regular tetrahedron. Superconductivity is optimized within this three hole Fermi surface regime, while the stoner factor of the antiferromagnetism has an overall tendency of increasing upon decreasing the bond angle. Combining also the effect of the varying the Fe-As bond length, we provide a guiding principle for obtaining high $T_c$.

cond-mat.supr-con↗

Possible three dimensional nodes in the $s{\pm}$ superconducting gap of BaFe$_2$(As$_{1-x}$P$_x$)$_2$

We examine theoretically the superconducting state of BaFe$_2$(As$_{1-x}$P$_x$)$_2$, an isovalent doping 122 iron pnictide superconductor. We construct a three dimensional ten orbital model from first principles band calculation, and investigate the superconducting gap within the spin fluctuation mediated pairing mechanism. The gap is basically $s\pm$, where the gap changes its sign between electron and hole Fermi surfaces, but three dimensional nodal structures appear in the largely warped hole Fermi surface having strong $Z^2/XZ/YZ$ orbital character. The present result, together with our previous study on 1111 systems, explains the strong material dependence of the superconducting gap in the iron pnictides.

cond-mat.supr-con↗

Two-Orbital Model Explains the Higher Transition Temperature of the Single-Layer Hg-Cuprate Superconductor Compared to That of the La-Cuprate Superconductor

In order to explore the reason why the single-layered cuprates, La$_{2-x}$(Sr/Ba)$_x$CuO$_4$ ($T_c\simeq$ 40K) and HgBa$_2$CuO$_{4+δ}$ ($T_c\simeq$ 90K), have such a significant difference in $T_c$, we study a two-orbital model that incorporates the $d_{z^2}$ orbital on top of the $d_{x^2-y^2}$ orbital. It is found, with the fluctuation exchange approximation, that the $d_{z^2}$ orbital contribution to the Fermi surface, which is stronger in the La system, works against d-wave superconductivity, thereby dominating over the effect of the Fermi surface shape. The result resolves the long-standing contradiction between the theoretical results on Hubbard-type models and the experimental material dependence of $T_c$ in the cuprates.

cond-mat.supr-con↗

Origin of coexisting large Seebeck coefficient and metallic conductivity in the electron doped SrTiO$_3$ and KTaO$_3$

We study the origin of the large Seebeck coefficient despite the metallic conductivity in the La-doped SrTiO$_3$ and Ba-doped KTaO$_3$. We calculate the band structure of SrTiO$_3$ and KTaO$_3$, from which the Seebeck coefficient is obtained using the Boltzmann's equation. We conclude that the multiplicity of the $t_{2g}$ bands in these materials is one major origin of the good thermoelectric property in that when compared at a fixed total number of doped electrons, the Seebeck coefficient and thus the power factor are larger in multiple band systems than in single band ones because the number of doped electron bands {\it per band} is smaller in the former. We also find that the second nearest neighbor hopping integral, which generally has negative values in these materials and works destructively against the Seebeck effect, is nearly similar between KTaO$_3$ and SrTiO$_3$ despite the larger band width in the former. This can be another factor favorable for thermopower in the Ba-doped KTaO$_3$.

cond-mat.mtrl-sci↗

Pnictogen height as a possible switch between high-T_c nodeless and low-T_c nodal pairings in the iron based superconductors

We study the effect of the lattice structure on the spin-fluctuation mediated superconductivity in the iron pnictides adopting the five-band models of several virtual lattice structures of LaFeAsO as well as actual materials such as NdFeAsO and LaFePO obtained from the maximally-localized Wannier orbitals. Random phase approximation is applied to the models to solve the Eliashberg equation. This reveals that the gap function and the strength of the superconducting instability are determined by the cooperation or competition among multiple spin fluctuation modes arising from several nestings among disconnected pieces of the Fermi surface, which is affected by the lattice structure. Specifically, the appearance of the Fermi surface $γ$ around $(π,π)$ in the unfolded Brillouin zone is sensitive to the pnictogen height $h_{\rm Pn}$ measured from the Fe plane, where $h_{\rm Pn}$ is shown to act as a switch between high-$T_c$ nodeless and low-$T_c$ nodal pairings. We also find that reduction of the lattice constants generally suppresses superconductivity. We can then combine these to obtain a generic superconducting phase diagram against the pnictogen height and lattice constant. This suggests that NdFeAsO is expected to exhibit a fully-gapped, sign-reversing s-wave superconductivity with a higher $T_c$ than in LaFeAsO, while a nodal pairing with a low $T_c$ is expected for LaFePO, which is consistent with experiments.

cond-mat.supr-con↗

First-principles study on the origin of large thermopower in hole-doped LaRhO3 and CuRhO2

Based on first-principles calculations, we study the origin of the large thermopower in Ni-doped LaRhO3 and Mg-doped CuRhO2. We calculate the band structure and construct the maximally localized Wannier functions from which a tight binding Hamiltonian is obtained. The Seebeck coefficient is calculated within the Boltzmann's equation approach using this effective Hamiltonian. For LaRhO3, we find that the Seebeck coefficient remains nearly constant within a large hole concentration range, which is consistent with the experimental observation. For CuRhO2, the overall temperature dependence of the calculated Seebeck coefficient is in excellent agreement with the experiment. The origin of the large thermopower is discussed.

cond-mat.mtrl-sci↗

Unconventional pairing originating from disconnected Fermi surfaces in superconducting LaFeAsO$_{1-x}$F$_x$}

For a newly discovered iron-based high $T_c$ superconductor LaFeAsO$_{1-x}$F$_x$, we have constructed a minimal model, where inclusion of all the five Fe $d$ bands is found to be necessary. Random-phase approximation is applied to the model to investigate the origin of superconductivity. We conclude that the multiple spin fluctuation modes arising from the nesting across the disconnected Fermi surfaces realize an extended s-wave pairing, while d-wave pairing can also be another candidate.

cond-mat.supr-con↗

Electronic Structure and Electron Correlation in LaFeAsO_{1-x}F_x and LaFePO_{1-x}F_x

Photoemission spectroscopy is used to investigate the electronic structure of the newly discovered iron-based superconductors LaFeAsO_{1-x}F_x and LaFePO_{1-x}F_x. Line shapes of the Fe 2p core-level spectra suggest an itinerant character of Fe 3d electrons. The valence-band spectra are generally consistent with band-structure calculations except for the shifts of Fe 3d-derived peaks toward the Fermi level. From spectra taken in the Fe 3p -> 3d core-absorption region, we have obtained the experimental Fe 3d partial density of states, and explained it in terms of a band-structure calculation with a phenomenological self-energy correction, yielding a mass renormalization factor of ~< 2.

cond-mat.supr-con↗