arXiv subjects

Hidetoshi Oguro

Publications and source records attributed to Hidetoshi Oguro.

6 recordsLinked to original sources

arXiv2017

Fabrication and Transport Properties of 100 m Class Sr0.6K0.4Fe2As2 Wires and Pancake Coils

Iron-pnictides are hotly studied since 2008 in the superconducting materials research area, due to their special properties and unclear mechanism. Big achievement has been made in the pnictide research during the past years. For practical uses, pnictide superconductor should be fabricated in a long wire form which can be used for different devices. In this work, 100 m class 7-core Sr0.6K0.4Fe2As2 (Sr122) tapes have been made using the powder-in-tube technique, which is reported for the first time. Clearly, an average Jc of 1.3x10^4 A/cm^2 at 10 T was reached over the 115 meter length, showing a high property and good uniformity of 100 meter level Sr122 tapes. Using the 10 m long Sr122 tapes, two double-pancake coils were fabricated by a wind and reaction technique. No transport current could be measured for the coil made from the mono-filamentary tape. However, transport Ic was obtained in the coil made from the 7-filamentary tape. The factors which affect the superconducting property of the coil were discussed in this work.

cond-mat.supr-con↗

arXiv2016

Non-Fermi liquid behavior of electrical resistivity close to the nematic critical point in Fe$_{1-x}$Co$_x$Se and FeSe$_{1-y}$S$_y$

Temperature dependence of resistivity of single crystals of Fe$_{1-x}$Co$_x$Se and FeSe$_{1-y}$S$_y$ is studied in detail under zero and high magnetic field (magnetoresistance), the latter of which enables to monitor the temperature ($T$) evolution of resistivity below the onset of superconducting transition temperature ($T_{\rm c}$). In FeSe$_{1-y}$S$_y$, $T$-linear dependence of resistivity is prominent in $y$ = 0.160 below 40 K, whereas it changes to a Fermi-liquid(FL)-like $T^2$ one below 10 K in $y$ = 0.212. These suggest that the quantum critical point (QCP) originating from the electronic nematicity resides around $y$ = 0.160 and the fluctuation in QCP gives rise anomalous $T$-linear dependence in resistivity in a wide $T$ range. In Fe$_{1-x}$Co$_x$Se, resistivity gradually changes from linear- to quadratic- $T$-dependent one at low temperatures in the range between $x$ = 0.036 and 0.075. These could be interpreted by scenarios of both the nematic QCP and the crossover in the ground states between the orthorhombic nematic phase and the tetragonal phase. The anomalies found as $T$-linear resistivity are discussed in terms of orbital and spin fluctuation arising from the nematic QCP.

cond-mat.supr-con↗

arXiv2014

High critical current density in textured Ba-122/Ag tapes fabricated by scalable rolling process

The industrial manufacturing of the long-length iron-pnictide wires and tapes requires simple and low-cost technology. Although the transport critical current density of the FeAs-122 tapes has already achieved the practical application level, their fabrication procedures are relatively complicated or required specialized instruments. Ag-sheathed Ba0.6K0.4Fe2As2 superconducting tapes were fabricated by the scalable rolling process. At 4.2 K and 10 T, the critical current density Jc has achieved 5.4x10^4 A/cm2. We ascribe the excellent performance to the high purity and homogeneity of the superconducting phase, high density and high c-axis texture of the superconducting core. Our method provides a simple way to scale up the production of the long-length iron-based superconducting tapes with high Jc.

cond-mat.supr-con↗

arXiv2014

Van der Waals epitaxial growth of topological insulator Bi$_{2-x}$Sb$_x$Te$_{3-y}$Se$_y$ ultrathin nanoplate on electrically insulating fluorophlogopite mica

We report the growth of high quality Bi$_{2-x}$Sb$_x$Te$_{3-y}$Se$_y$ ultrathin nanoplates (BSTS-NPs) on an electrically insulating fluorophlogopite mica substrate using a catalyst-free vapor solid method. Under an optimized pressure and suitable Ar gas flow rate, we control the thickness, the size and the composition of BSTS-NPs. Raman spectra showing systematic change indicate that the thicknesses and compositions of BSTS-NPs are indeed accurately controlled. Electrical transport demonstrates that a robust Dirac cone carrier transport in BSTS-NPs. Since BSTS-NPs provide superior dominant surface transport of the tunable Dirac cone surface states with negligible contribution of the conduction of the bulk states, BSTS-NPs provide an ideal platform to explore intrinsic physical phenomena as well as technological applications of 3-dimensional topological insulators in the future.

cond-mat.mtrl-sci↗

arXiv2014

Realization of practical level current densities in Sr0.6K0.4Fe2As2 tape conductors for high-field applications

122 type pnictide superconductors are of particular interest for high-field applications because of their large upper critical fields Hc2 (> 100 T), low Hc2 anisotropy r (< 2), and high thin-film critical current densities Jc (> 1 MA/cm2 at 4.2 K). Successful magnet applications require fabrication of polycrystalline superconducting wires that exhibit large in-field Jc, which is limited by poor grain coupling and weak-link behavior at grain boundaries. Here we report our recent achievement in the developing Sr0.6K0.4Fe2As2 tapes with transport Jc up to 0.1 MA/cm2 at 10 T and 4.2 K. This value is by far the highest ever recorded for iron based superconducting wires and has surpassed the threshold for practical application for the first time. The synergy effects of enhanced grain connectivity, alleviation of the weak-link behavior at grain boundaries, and the strong intrinsic pinning characteristics led to the superior Jc performance exhibited in our samples. This advanced Jc result opens up the possibility for iron-pnictide superconducting wires to win the race in high-field magnet applications.

cond-mat.supr-con↗

arXiv2012

Tensile Strain Dependence of Critical Current for RHQ-Nb3Al Wires

KEK and NIMS have been jointly developing Nb3Al superconducting wire with a rapid heating and quenching (RHQ) method towards high field accelerator magnets in the Large Hadron Collider (LHC) luminosity upgrade. A15-type superconductors such as Nb3Al and Nb3Sn exhibit strain dependence with respect to their critical currents. Therefore, a thorough understanding of strain behavior is necessary for high field accelerator magnet development, which will be critical for the luminosity upgrade of the LHC.

cond-mat.supr-con↗