arXiv subjects

Hila Naaman

Publications and source records attributed to Hila Naaman.

5 recordsLinked to original sources

arXiv2024

ECG-TEM: Time-based sub-Nyquist sampling for ECG signal reconstruction and Hardware Prototype

Portable heart rate monitoring (HRM) systems based on electrocardiograms (ECGs) have become increasingly crucial for preventing lifestyle diseases. For such portable systems, minimizing power consumption and sampling rate is critical due to the substantial data generated during long-term ECG monitoring. The variable pulse-width finite rate of innovation (VPW-FRI) framework provides an effective solution for low-rate sampling and compression of ECG signals. We develop a time-based sub-Nyquist sampling and reconstruction method for ECG signals specifically designed for HRM applications. Our approach harnesses the integrate-and-fire time-encoding machine (IF-TEM) as a power-efficient, time-based, asynchronous sampler, generating a sequence of time instants without the need for a global clock. The ECG signal is represented as a linear combination of VPW-FRI pulses, which is then subjected to pre-filtering before being sampled by the IF-TEM sampler. A compactly supported robust filter with a frequency-domain alias cancellation condition is used to combat the effects of noise. Our reconstruction process involves consecutive partial summations of discrete representations of the input signal derived from the series of time encodings, further enhancing the accuracy of the reconstructed ECG signals. Additionally, we introduce an IF-TEM sampling hardware system for ECG signals, implemented using an analog filter device. The firing rate is 42-80Hz, equivalent to approximately 0.025-0.05 of the Nyquist rate. Our hardware validation bridges the gap between theory and practice and demonstrates the robust performance and practical applicability of our approach in accurately monitoring heart rates and reconstructing ECG signals.

eess.SP↗

arXiv2024

Time Encoding Quantization of Bandlimited and Finite-Rate-of-Innovation Signals

This paper studies the impact of quantization in integrate-and-fire time encoding machine (IF-TEM) sampler used for bandlimited (BL) and finite-rate-of-innovation (FRI) signals. An upper bound is derived for the mean squared error (MSE) of IF-TEM sampler and is compared against that of classical analog-to-digital converters (ADCs) with uniform sampling and quantization. The interplay between a signal's energy, bandwidth, and peak amplitude is used to identify how the MSE of IF-TEM sampler with quantization is influenced by these parameters. More precisely, the quantization step size of the IF-TEM sampler can be reduced when the maximum frequency of a bandlimited signal or the number of pulses of an FRI signal is increased. Leveraging this insight, specific parameter settings are identified for which the quantized IF-TEM sampler achieves an MSE bound that is roughly 8 dB lower than that of a classical ADC with the same number of bits. Experimental results validate the theoretical conclusions.

cs.IT↗

arXiv2023

Hardware Prototype of a Time-Encoding Sub-Nyquist ADC

Analog-to-digital converters (ADCs) are key components of digital signal processing. Classical samplers in this framework are controlled by a global clock. At high sampling rates, clocks are expensive and power-hungry, thus increasing the cost and energy consumption of ADCs. It is, therefore, desirable to sample using a clock-less ADC at the lowest possible rate. An integrate-and-fire time-encoding machine (IF-TEM) is a time-based power-efficient asynchronous design that is not synced to a global clock. Finite-rate-of-innovation (FRI) signals, ubiquitous in various applications, have fewer degrees of freedom than the signal's Nyquist rate, enabling sub-Nyquist sampling signal models. This work proposes a power-efficient IF-TEM ADC architecture and demonstrates sub-Nyquist sampling and FRI signal recovery. Using an IF-TEM, we implement in hardware the first sub-Nyquist time-based sampler. We offer a feasible approach for accurately estimating the FRI parameters from IF-TEM data. The suggested hardware and reconstruction approach retrieves FRI parameters with an error of up to -25dB while operating at rates approximately 10 times lower than the Nyquist rate, paving the way to low-power ADC architectures.

eess.SP↗

arXiv2022

Compressed IF-TEM: Time Encoding Analog-To-Digital Compression

An integrate-and-fire time-encoding-machine (IF-TEM) is an energy-efficient asynchronous sampler. Utilizing the IF-TEM sampler for bandlimited signals, we introduce designs for time encoding and decoding with analog compression prior to the quantization phase. Before the quantizer, efficient analog compression is conducted based on the stationarity of the encoded signal, which is a fundamental characteristic of IF-TEM processing. Low-bit-rate reconstruction is achieved by subdividing the known IF-TEM dynamic range into tighter windows, which can be either fixed size or dynamically changed, and detecting in which window the sample resides. We demonstrate empirically that employing the same number of samples and up to 7% additional bits than the conventional IF-TEM results in a 5-20dB improvement in MSE. Fixing the reconstruction MSE target and the number of samples, using the compressed IF-TEM enables the use of 1-2 fewer bits compared to the classical IF-TEM.

cs.IT↗

arXiv2021

FRI-TEM: Time Encoding Sampling of Finite-Rate-of-Innovation Signals

Classical sampling is based on acquiring signal amplitudes at specific points in time, with the minimal sampling rate dictated by the degrees of freedom in the signal. The samplers in this framework are controlled by a global clock that operates at a rate greater than or equal to the minimal sampling rate. At high sampling rates, clocks are power-consuming and prone to electromagnetic interference. An integrate-and-fire time encoding machine (IF-TEM) is an alternative power-efficient sampling mechanism which does not require a global clock. Here, the samples are irregularly spaced threshold-based samples. In this paper, we investigate the problem of sampling finite-rate-of-innovation (FRI) signals using an IF-TEM. We provide theoretical recovery guarantees for an FRI signal with arbitrary pulse shape and without any constraint on the minimum separation between the pulses. In particular, we show how to design a sampling kernel, IF-TEM, and recovery method such that the FRI signals are perfectly reconstructed. We then propose a modification to the sampling kernel to improve noise robustness. Our results enable designing low-cost and energy-efficient analog-to-digital converters for FRI signals.

cs.IT↗