arXiv subjects

Himal A. Suraweera

Publications and source records attributed to Himal A. Suraweera.

At least 19 recordsLinked to original sources

arXiv2026

Privacy-Aware ISAC for Full-Duplex Monostatic Systems Using Movable Antennas

This work investigates sensing privacy in full-duplex (FD) monostatic integrated sensing and communication (ISAC) systems with movable antennas (MAs). The proposed approach jointly optimizes beamforming and antenna trajectories to create a deceptive dummy DD-bin response at a passive sensing eavesdropper (Eve), while satisfying a true-bin sensing-quality requirement at the base station (BS). The resulting problem is highly non-convex. {To address this, a stage-wise alternating local-search framework is developed to obtain suboptimal solutions. Within this framework, we maximize the worst-case margin between dummy and true delay-Doppler (DD)-bin detector-oriented SINR surrogates over a discretized uncertainty region for Eve, incorporating detector-aligned dummy-bin refinement and true-bin preservation.} Simulation results show that the proposed MA-enabled design suppresses Eve's true-target DD-bin selection and increases dummy-bin selection probability compared with benchmark schemes, while maintaining reliable BS sensing performance.

eess.SP↗

arXiv2026

DRL-AdaPart: DRL-Driven Adaptive STAR-RIS Partitioning for Fair and Efficient Resource Utilization

Efficient resource utilization is proposed for simultaneously transmitting and reflecting reconfigurable intelligent surfaces (STAR-RIS) to ensure fair and high data rates. We optimize the number of STAR-RIS elements to be allocated to each user and maximize the sum of the user rates. To promote fairness, we introduce a soft fairness mechanism that guarantees a minimum STAR-RIS element allocation to every user. Subject to this requirement, the phase shifts of the STAR-RIS elements and the remaining element assignments are jointly optimized by harnessing an appropriately tailored deep reinforcement learning (DRL) algorithm. The proposed DRL method is also compared to Dinkelbach's algorithm and to a bespoke hybrid DRL approach. A deactivation incentive is incorporated into the DRL model for enhancing resource utilization by intelligently deactivating some of the STAR-RIS elements when not required. The proposed DRL method achieves fair and high data rates for both stationary and mobile users, while ensuring efficient resource utilization. Using the proposed DRL method, up to 34% and 23% of STAR-RIS elements can be deactivated in static and mobile scenarios, respectively, with negligible degradation in the average DL data rate.

cs.IT↗

arXiv2026

URLLC-Aware Proactive UAV Placement in Internet of Vehicles

Unmanned aerial vehicles (UAVs) are envisioned to provide diverse services from the air. The service quality may rely on the wireless performance which is affected by the UAV's position. In this paper, we focus on the UAV placement problem in the Internet of Vehicles, where the UAV is deployed to monitor the road traffic and sends the monitored videos to vehicles. The studied problem is formulated as video resolution maximization by optimizing over the UAV's position. Moreover, we take into account the maximal transmission delay and impose a probabilistic constraint. To solve the formulated problem, we first leverage the techniques in extreme value theory (EVT) and Gaussian process regression (GPR) to characterize the influence of the UAV's position on the delay performance. Based on this characterization, we subsequently propose a proactive resolution selection and UAV placement approach, which adaptively places the UAV according to the geographic distribution of vehicles. Numerical results justify the joint usage of EVT and GPR for maximal delay characterization. Through investigating the maximal transmission delay, the proposed approach nearly achieves the optimal performance when vehicles are evenly distributed, and reduces 10% and 19% of the 999-th 1000-quantile over two baselines when vehicles are biased distributed.

cs.NI↗

arXiv2026

Performance Analysis of Movable Antenna Arrays

This paper provides a thorough mathematical analysis of continuous movable antenna (MA) arrays. Focusing on the multiple antenna case, we consider a linear antenna array with multiple fixed antenna elements that moves along a line. We assume a full, spatially coherent correlation model and continuous positioning of the array. We provide asymptotically exact approximations to the upper tail of the cumulative distribution function (cdf) of the signal-to-noise ratio (SNR), considering both correlated and uncorrelated antenna elements in the array. We also obtain a novel closed-form expression for the level crossing rate (LCR) of the SNR under correlated array elements, where a non-separable two-dimensional correlation is present. The analysis is validated through simulations, confirming both the accuracy of the LCR expressions and the tightness of the cdf bounds in the upper tail. Numerical results show that the proposed MA array outperforms single fluid antenna and fixed array systems, with reduced inter-element spacing providing further performance gains.

eess.SP↗

arXiv2026

Analysis of Fluid Antenna Systems with Continuous Positioning and Spatial Correlation

We analyze multi-user fluid antenna systems with continuous positioning over a track of length L under a spatial correlation model, where exact performance distributions become analytically intractable. We develop a level-crossing-rate (LCR) framework that yields asymptotically exact approximations and tight bounds for the cumulative distribution function (cdf) of the optimized metric S* = sup_{0 <= l <= L}, where S(l) denotes the performance metric at antenna position l. For a single fluid antenna, we characterize the cdfs of signal-to-noise ratio (SNR), signal-to interference ratio (SIR) and signal-to-interference-plus-noise ratio (SINR) under Rayleigh fading and extend the approach to Ricean desired channels. We further treat two multi-antenna receiver layouts with maximum-ratio combining: (i) a fluid antenna with a fixed antenna and (ii) a two-element moving array, deriving new LCR results for the practically important case where array-element correlation and positional correlation are inherently coupled. The analysis provides actionable insights: high-threshold tail probabilities scale linearly with L, we derive the required L to neutralize a co-channel interferer, and we show that about one wavelength of movement can reduce outage by three orders of magnitude. Monte Carlo results validate the accuracy across the considered scenarios and regimes.

eess.SP↗

arXiv2026

Repeater-Assisted Massive MIMO Full-Duplex Communications

We consider a wireless network comprising multiple singleantenna repeaters that amplify and instantaneously re-transmit received signals in a full-duplex (FD) communication setting. Specifically, we study a massive multiple-input multiple output base station that simultaneously serves multiple uplink (UL) and downlink (DL) user equipment (UE) over the same frequency band. The focus is on the problem of repeater weight optimization at each active repeater to maximize the sum of the weighted minimum spectral efficiencies (SEs) for both UL and DL UEs. The resulting non-convex optimization problem is tackled using a successive convex approximation technique. To demonstrate the effectiveness of the proposed approach, we evaluate its performance against benchmark systems with and without repeater assistance. The optimized FD design achieves SE improvements of up to 4-fold and 2.5-fold compared to its half-duplex counterpart.

cs.IT↗

arXiv2025

Chaotic Noncoherent SWIPT in Multi-Functional RIS-Aided Systems

In this letter, we investigate the design of chaotic signal-based transmit waveforms in a multi-functional reconfigurable intelligent surface (MF-RIS)-aided set-up for simultaneous wireless information and power transfer. We propose a differential chaos shift keying-based MF-RIS-aided set-up, where the MF-RIS is partitioned into three non-overlapping surfaces. The elements of the first sub-surface perform energy harvesting (EH), which in turn, provide the required power to the other two sub-surfaces responsible for transmission and reflection of the incident signal. By considering a frequency selective scenario and a realistic EH model, we characterize the chaotic MF-RIS-aided system in terms of its EH performance and the associated bit error rate. Thereafter, we characterize the harvested energy-bit error rate trade-off and derive a lower bound on the number of elements required to operate in the EH mode. Accordingly, we propose novel transmit waveform designs to demonstrate the importance of the choice of appropriate system parameters in the context of achieving self-sustainability.

eess.SY↗

arXiv2024

Damage Assessment after Natural Disasters with UAVs: Semantic Feature Extraction using Deep Learning

Unmanned aerial vehicle-assisted disaster recovery missions have been promoted recently due to their reliability and flexibility. Machine learning algorithms running onboard significantly enhance the utility of UAVs by enabling real-time data processing and efficient decision-making, despite being in a resource-constrained environment. However, the limited bandwidth and intermittent connectivity make transmitting the outputs to ground stations challenging. This paper proposes a novel semantic extractor that can be adopted into any machine learning downstream task for identifying the critical data required for decision-making. The semantic extractor can be executed onboard which results in a reduction of data that needs to be transmitted to ground stations. We test the proposed architecture together with the semantic extractor on two publicly available datasets, FloodNet and RescueNet, for two downstream tasks: visual question answering and disaster damage level classification. Our experimental results demonstrate the proposed method maintains high accuracy across different downstream tasks while significantly reducing the volume of transmitted data, highlighting the effectiveness of our semantic extractor in capturing task-specific salient information.

cs.CV↗

arXiv2024

Analysis and Optimization of RIS-Assisted Cell-Free Massive MIMO NOMA Systems

We consider a reconfigurable intelligent surface (RIS) assisted cell-free massive multiple-input multiple-output non-orthogonal multiple access (NOMA) system, where each access point (AP) serves all the users with the aid of the RIS. We practically model the system by considering imperfect instantaneous channel state information (CSI) and employing imperfect successive interference cancellation at the users end. We first obtain the channel estimates using linear minimum mean square error approach considering the spatial correlation at the RIS and then derive a closed-form downlink spectral efficiency (SE) expression using the statistical CSI. We next formulate a joint optimization problem to maximize the sum SE of the system. We first introduce a novel successive Quadratic Transform (successive-QT) algorithm to optimize the transmit power coefficients using the concept of block optimization along with quadratic transform and then use the particle swarm optimization technique to design the RIS phase shifts. Note that most of the existing works on RIS-aided cell-free systems are specific instances of the general scenario studied in this work. We numerically show that i) the RIS-assisted link is more advantageous at lower transmit power regions where the direct link between AP and user is weak, ii) NOMA outperforms orthogonal multiple access schemes in terms of SE, and iii) the proposed joint optimization framework significantly improves the sum SE of the system.

cs.IT↗

arXiv2024

A DRL Approach for RIS-Assisted Full-Duplex UL and DL Transmission: Beamforming, Phase Shift and Power Optimization

We propose a deep reinforcement learning (DRL) approach for a full-duplex (FD) transmission that predicts the phase shifts of the reconfigurable intelligent surface (RIS), base station (BS) active beamformers, and the transmit powers to maximize the weighted sum rate of uplink and downlink users. Existing methods require channel state information (CSI) and residual self-interference (SI) knowledge to calculate exact active beamformers or the DRL rewards, which typically fail without CSI or residual SI. Especially for time-varying channels, estimating and signaling CSI to the DRL agent is required at each time step and is costly. We propose a two-stage DRL framework with minimal signaling overhead to address this. The first stage uses the least squares method to initiate learning by partially canceling the residual SI. The second stage uses DRL to achieve performance comparable to existing CSI-based methods without requiring the CSI or the exact residual SI. Further, the proposed DRL framework for quantized RIS phase shifts reduces the signaling from BS to the RISs using $32$ times fewer bits than the continuous version. The quantized methods reduce action space, resulting in faster convergence and $7.1\%$ and $22.28\%$ better UL and DL rates, respectively than the continuous method.

cs.IT↗

arXiv2024

Handover Management through Reconfigurable Intelligent Surfaces for VLC under Blockage Conditions

In this paper, we consider an indoor visible light communication (VLC) system with multiple "white" light emitting diodes serving to form overlapping wireless communication cells. In order to maintain seamless connectivity to mobile users, a handover procedure should be implemented. In particular, practical conditions such as blockages due to obstacles inside the room environment and the mobility of users can affect direct VLC connectivity. The use of reconfigurable intelligent surfaces (RISs) in optical wireless systems allows to exploit non-direct connectivity links, thus providing efficient communication links. In this paper, we present a proactive handover mechanism that exploits the presence of a RIS, in order to redirect the communication links in case of blockages. The proposed approach has been implemented both in hard and soft modes and assessed in terms of achievable data rate and handover latency for a user walking in a given reference room at different user speeds and blockage conditions. Our presented results and comparisons with conventional handover methods (i.e., without RIS) are helpful in showing the superiority of the presented algorithm.

cs.NI↗

arXiv2023

Continuous Fluid Antenna Systems: Modeling and Analysis

Fluid antennas (FAs) is a promising technology for introducing flexibility and reconfigurability in wireless networks. Recent research efforts have highlighted the potential gains that can be achieved in comparison to conventional antennas. These works assume that the FA has a discrete number of positions that the liquid can take. However, from a practical standpoint, the liquid moves in a continuous fashion to any point inside the FA. In this paper, we focus on a continuous FA system (CFAS) and present a general framework for its design and analytical evaluation. In particular, we derive closed-form analytical expressions for the level crossing rate (LCR) and the average fade duration of the continuous signal-to-interference ratio (SIR) process over the FA's length. Then, by leveraging the LCR expression, we characterize the system's outage performance with a bound on the cumulative distribution function of the SIR's supremum. Our results confirm that the CFAS outperforms its discrete counterpart and thus provides the performance limits of FA-based systems.

eess.SP↗

arXiv2023

Full-Duplex Wireless for 6G: Progress Brings New Opportunities and Challenges

The use of in-band full-duplex (FD) enables nodes to simultaneously transmit and receive on the same frequency band, which challenges the traditional assumption in wireless network design. The full-duplex capability enhances spectral efficiency and decreases latency, which are two key drivers pushing the performance expectations of next-generation mobile networks. In less than ten years, in-band FD has advanced from being demonstrated in research labs to being implemented in standards, presenting new opportunities to utilize its foundational concepts. Some of the most significant opportunities include using FD to enable wireless networks to sense the physical environment, integrate sensing and communication applications, develop integrated access and backhaul solutions, and work with smart signal propagation environments powered by reconfigurable intelligent surfaces. However, these new opportunities also come with new challenges for large-scale commercial deployment of FD technology, such as managing self-interference, combating cross-link interference in multi-cell networks, and coexistence of dynamic time division duplex, subband FD and FD networks.

cs.IT↗

arXiv2022

Full-Duplex Transceivers for Next-Generation Wireless Communication Systems

Wireless communication systems can be enhanced at the link level, in medium access, and at the network level when transceivers are equipped with full-duplex capability: the transformative ability to simultaneously transmit and receive over the same frequency spectrum. Effective methods to cancel self-interference are required to facilitate full-duplex operation, which we overview herein in the context of traditional radios, along with those in next-generation wireless networks. We highlight advances in self-interference cancellation that leverage machine learning, and we summarize key considerations and recent progress in full-duplex millimeter-wave systems and their application in integrated access and backhaul. We present example design problems and noteworthy findings from recent experimental research to introduce and motivate the advancement of full-duplex millimeter-wave systems. We conclude this chapter by forecasting the future of full-duplex and outlining important research directions that warrant further study.

eess.SP↗

arXiv2022

Sum Rate Maximization in STAR-RIS Assisted Full-Duplex Communication Systems

The sum-rate performance of simultaneous transmitting and reflecting reconfigurable intelligent surface (STAR-RIS) assisted full-duplex (FD) communication systems is investigated. The reflection and transmission coefficients of STAR-RIS elements are optimized for the energy splitting and mode switching protocols to maximize the weighted sum rate of the system. The underlying optimization problems are non-convex, and hence, the successive convex approximation technique has been employed to develop efficient algorithms to obtain sub-optimal solutions. Thereby, the maximum average weighted sum rate and corresponding coefficients at the STAR-RIS subject to predefined threshold rates and unit-modulus constraints are quantified. The performance of the proposed system design is compared with the conventional reflecting/transmitting-only RISs and half-duplex counterparts via simulations where it is observed that STAR-RIS can boost the performance of FD systems.

cs.IT↗

arXiv2020

Risk-Sensitive Task Fetching and Offloading for Vehicular Edge Computing

This letter studies an ultra-reliable low latency communication problem focusing on a vehicular edge computing network in which vehicles either fetch and synthesize images recorded by surveillance cameras or acquire the synthesized image from an edge computing server. The notion of risk-sensitive in financial mathematics is leveraged to define a reliability measure, and the studied problem is formulated as a risk minimization problem for each vehicle's end-to-end (E2E) task fetching and offloading delays. Specifically, by resorting to a joint utility and policy estimation-based learning algorithm, a distributed risk-sensitive solution for task fetching and offloading is proposed. Simulation results show that our proposed solution achieves performance improvements up to 40% variance reduction and steeper distribution tail of the E2E delay over an averaged-based baseline.

cs.NI↗

arXiv2018

Antenna Selection in Full-Duplex Cooperative NOMA Systems

We investigate the problem of antenna selection (AS) in full-duplex (FD) cooperative non-orthogonal multiple access (NOMA) systems, where a multi-antenna FD relay assists transmission from a multi-antenna base station (BS) to a far user, while at the same, the BS transmits to a near user. Specifically, based on the end-to-end signal-to-interference-plus-noise ratio at the near and far users, two AS schemes to select a single transmit antenna at both the BS and the relay, respectively, as well as a single receive antenna at relay are proposed. In order to study the ergodic sum rate and outage probability of these AS schemes, we have derived closed-form expressions assuming Rayleigh fading channels. The sum rate and outage probability of the AS schemes are also compared with the optimum selection scheme that maximizes the performance as well as with a random AS scheme. Our results show that the proposed AS schemes can deliver a near-optimal performance for near and far users, respectively.

cs.IT↗

arXiv2017

Full-Duplex Non-Orthogonal Multiple Access for Modern Wireless Networks

Non-orthogonal multiple access (NOMA) is an interesting concept to provide higher capacity for future wireless communications. In this article, we consider the feasibility and benefits of combining full-duplex operation with NOMA for modern communication systems. Specifically, we provide a comprehensive overview on application of full-duplex NOMA in cellular networks, cooperative and cognitive radio networks, and characterize gains possible due to full-duplex operation. Accordingly, we discuss challenges, particularly the self-interference and inter-user interference and provide potential solutions to interference mitigation and quality-of-service provision based on beamforming, power control, and link scheduling. We further discuss future research challenges and interesting directions to pursue to bring full-duplex NOMA into maturity and use in practice.

eess.SP↗