arXiv subjects

Himanshu Thapliyal

Publications and source records attributed to Himanshu Thapliyal.

At least 19 recordsLinked to original sources

arXiv2026

Quantum Sensing Applications in Consumer Electronics: Emerging Methods and Near-Term Use Cases

Quantum sensing is emerging as a practical means of improving sensing capabilities in consumer electronics, particularly where size, power, and noise constrain classical approaches. In this paper, we reviewed the near-term applicability of quantum sensing using a platform-and-application framework. Within this framework, we outlined the general sensing protocol and discussed the working of the four key quantum sensing platforms relevant to consumer electronics: nitrogen-vacancy (NV) centers, atomic vapor cells, Rydberg atomic sensors, and photonic quantum sensors. Through case studies involving navigation and positioning, healthcare and wearables, radio-frequency (RF) and wireless systems, the Internet of Things (IoT), and imaging, we examined the tangible engineering advantages offered by quantum sensing. Rather than replacing devices outright, quantum sensing is more likely to earn its place in the near-term by upgrading specific measurement components within hybrid classical-quantum systems. Right now, the clearest opportunities are in weak-field detection, compact RF reception, and sensing that remains robust in noise.

quant-ph↗

arXiv2026

S-ALSA: Co-Design of Adiabatic Logic-based Sensing and Balanced Bit-Cells for Secure and Energy-Efficient MRAM

Magnetoresistive Random Access Memory (MRAM) technologies such as Spin-Transfer Torque (STT-MRAM) and Spin-Orbit Torque assisted (SOT-STT-MRAM) offer nonvolatility and low leakage, making them attractive for IoT systems. However, conventional MRAM read circuits face two fundamental challenges: high dynamic energy consumption and vulnerability to side-channel attacks caused by data-dependent current variations in Magnetic Tunnel Junctions (MTJs). This paper presents a Secured Adiabatic Logic Sense Amplifier (SALSA) that addresses both challenges simultaneously through circuit-device co-design. S-ALSA combines structural current balancing via a 4T-2MTJ bit cell, which eliminates read current asymmetry at the storage level, with dynamic power equalization via adiabatic charge recovery in the sensing circuit. The proposed architecture supports both STT-MRAM and SOT-STT-MRAM. Case studies using 4x4 MRAM macros shows up to 80% energy savings over conventional Pre-Charge Sense Amplifiers (PCSA) across IoT frequencies. Correlation Power Analysis (CPA) attacks on PRESENT-80 encryption confirm complete suppression of key leakage when S-ALSA is combined with a balanced bit cell. This work establishes a unified framework where energy efficiency and hardware security are achieved simultaneously, enabling secure and low-power IoT memory design.

cs.AR↗

arXiv2026

QML for Quantum Sensing under Measurement-Induced Information Loss

Nitrogen-vacancy (NV) centers in diamond can serve as highly sensitive solid-state quantum sensors for high-sensitivity magnetometry. However, in the noisy intermediate-scale quantum (NISQ) era, extracting reliable information from noisy, finite-shot, and measurement-limited sensing data remains a considerable challenge. Whereas, quantum machine learning (QML) offers a potential path to improve parameter estimation by learning nonlinear relationships between quantum-sensing data and the underlying physical signal. In this work, we investigate the role of QML in magnetic-field estimation within an NV center-inspired magnetometry setting. We formulated magnetic field sensing as a supervised regression task. We compared the performance of several classical machine learning models trained on measurement-based classical data with that of quantum kernel-based models trained on pre-measurement coherent quantum states. Our objective is to isolate the impact of measurement-induced information loss and therefore provide a theoretical upper bound on the sensing performance. The upper bound is achievable only when coherent quantum information is directly available to the learning model. Our results show that QML-based sensing performance improves significantly with coherent quantum-state information, and not much with changes in model complexity or learning paradigm. This observation underscores the importance of learning pipelines that tightly integrate quantum sensors and QML models to enhance magnetic field sensing under realistic constraints.

quant-ph↗

arXiv2025

Quantum Transfer Learning to Boost Dementia Detection

Dementia is a devastating condition with profound implications for individuals, families, and healthcare systems. Early and accurate detection of dementia is critical for timely intervention and improved patient outcomes. While classical machine learning and deep learning approaches have been explored extensively for dementia prediction, these solutions often struggle with high-dimensional biomedical data and large-scale datasets, quickly reaching computational and performance limitations. To address this challenge, quantum machine learning (QML) has emerged as a promising paradigm, offering faster training and advanced pattern recognition capabilities. This work aims to demonstrate the potential of quantum transfer learning (QTL) to enhance the performance of a weak classical deep learning model applied to a binary classification task for dementia detection. Besides, we show the effect of noise on the QTL-based approach, investigating the reliability and robustness of this method. Using the OASIS 2 dataset, we show how quantum techniques can transform a suboptimal classical model into a more effective solution for biomedical image classification, highlighting their potential impact on advancing healthcare technology.

quant-ph↗

arXiv2025

Emotion Recognition in Older Adults with Quantum Machine Learning and Wearable Sensors

We investigate the feasibility of inferring emotional states exclusively from physiological signals, thereby presenting a privacy-preserving alternative to conventional facial recognition techniques. We conduct a performance comparison of classical machine learning algorithms and hybrid quantum machine learning (QML) methods with a quantum kernel-based model. Our results indicate that the quantum-enhanced SVM surpasses classical counterparts in classification performance across all emotion categories, even when trained on limited datasets. The F1 scores over all classes are over 80% with around a maximum of 36% improvement in the recall values. The integration of wearable sensor data with quantum machine learning not only enhances accuracy and robustness but also facilitates unobtrusive emotion recognition. This methodology holds promise for populations with impaired communication abilities, such as individuals with Alzheimer's Disease and Related Dementias (ADRD) and veterans with Post-Traumatic Stress Disorder (PTSD). The findings establish an early foundation for passive emotional monitoring in clinical and assisted living conditions.

cs.LG↗

arXiv2025

Quantum Properties Trojans (QuPTs) for Attacking Quantum Neural Networks

Quantum neural networks (QNN) hold immense potential for the future of quantum machine learning (QML). However, QNN security and robustness remain largely unexplored. In this work, we proposed novel Trojan attacks based on the quantum computing properties in a QNN-based binary classifier. Our proposed Quantum Properties Trojans (QuPTs) are based on the unitary property of quantum gates to insert noise and Hadamard gates to enable superposition to develop Trojans and attack QNNs. We showed that the proposed QuPTs are significantly stealthier and heavily impact the quantum circuits' performance, specifically QNNs. The most impactful QuPT caused a deterioration of 23% accuracy of the compromised QNN under the experimental setup. To the best of our knowledge, this is the first work on the Trojan attack on a fully quantum neural network independent of any hybrid classical-quantum architecture.

quant-ph↗

arXiv2025

Emotion Detection in Older Adults Using Physiological Signals from Wearable Sensors

Emotion detection in older adults is crucial for understanding their cognitive and emotional well-being, especially in hospital and assisted living environments. In this work, we investigate an edge-based, non-obtrusive approach to emotion identification that uses only physiological signals obtained via wearable sensors. Our dataset includes data from 40 older individuals. Emotional states were obtained using physiological signals from the Empatica E4 and Shimmer3 GSR+ wristband and facial expressions were recorded using camera-based emotion recognition with the iMotion's Facial Expression Analysis (FEA) module. The dataset also contains twelve emotion categories in terms of relative intensities. We aim to study how well emotion recognition can be accomplished using simply physiological sensor data, without the requirement for cameras or intrusive facial analysis. By leveraging classical machine learning models, we predict the intensity of emotional responses based on physiological signals. We achieved the highest 0.782 r2 score with the lowest 0.0006 MSE on the regression task. This method has significant implications for individuals with Alzheimer's Disease and Related Dementia (ADRD), as well as veterans coping with Post-Traumatic Stress Disorder (PTSD) or other cognitive impairments. Our results across multiple classical regression models validate the feasibility of this method, paving the way for privacy-preserving and efficient emotion recognition systems in real-world settings.

cs.HC↗

arXiv2025

Residue Number System (RNS) based Distributed Quantum Multiplication

Multiplication of quantum states is a frequently used function or subroutine in quantum algorithms and applications, making quantum multipliers an essential component of quantum arithmetic. However, quantum multiplier circuits suffer from high Toffoli depth and T gate usage, which ultimately affects their scalability and applicability on quantum computers. To address these issues, we propose utilizing the Residue Number System (RNS) based distributed quantum multiplication, which executes multiple quantum modulo multiplication circuits across quantum computers or jobs with lower Toffoli depth and T gate usage. Towards this end, we propose a design of Quantum Diminished-1 Modulo $(2^n+1)$ Multiplier, an essential component of RNS based distributed quantum multiplication. We provide estimates of quantum resource usage and compare them with those of an existing non-distributed quantum multiplier for 6 to 16 qubit sized output. Our comparative analysis estimates up to 46.018% lower Toffoli depth, and reduction in T gates of 34.483% to 86.25%.

quant-ph↗

arXiv2025

Quantum-Hybrid Support Vector Machines for Anomaly Detection in Industrial Control Systems

Sensitive data captured by Industrial Control Systems (ICS) play a large role in the safety and integrity of many critical infrastructures. Detection of anomalous or malicious data, or Anomaly Detection (AD), with machine learning is one of many vital components of cyberphysical security. Quantum kernel-based machine learning methods have shown promise in identifying complex anomalous behavior by leveraging the highly expressive and efficient feature spaces of quantum computing. This study focuses on the parameterization of Quantum Hybrid Support Vector Machines (QSVMs) using three popular datasets from Cyber-Physical Systems (CPS). The results demonstrate that QSVMs outperform traditional classical kernel methods, achieving 13.3% higher F1 scores. Additionally, this research investigates noise using simulations based on real IBMQ hardware, revealing a maximum error of only 0.98% in the QSVM kernels. This error results in an average reduction of 1.57% in classification metrics. Furthermore, the study found that QSVMs show a 91.023% improvement in kernel-target alignment compared to classical methods, indicating a potential "quantum advantage" in anomaly detection for critical infrastructures. This effort suggests that QSVMs can provide a substantial advantage in anomaly detection for ICS, ultimately enhancing the security and integrity of critical infrastructures.

quant-ph↗

arXiv2025

Detection of Physiological Data Tampering Attacks with Quantum Machine Learning

The widespread use of cloud-based medical devices and wearable sensors has made physiological data susceptible to tampering. These attacks can compromise the reliability of healthcare systems which can be critical and life-threatening. Detection of such data tampering is of immediate need. Machine learning has been used to detect anomalies in datasets but the performance of Quantum Machine Learning (QML) is still yet to be evaluated for physiological sensor data. Thus, our study compares the effectiveness of QML for detecting physiological data tampering, focusing on two types of white-box attacks: data poisoning and adversarial perturbation. The results show that QML models are better at identifying label-flipping attacks, achieving accuracy rates of 75%-95% depending on the data and attack severity. This superior performance is due to the ability of quantum algorithms to handle complex and high-dimensional data. However, both QML and classical models struggle to detect more sophisticated adversarial perturbation attacks, which subtly alter data without changing its statistical properties. Although QML performed poorly against this attack with around 45%-65% accuracy, it still outperformed classical algorithms in some cases.

quant-ph↗

arXiv2025

Quantum Hybrid Support Vector Machines for Stress Detection in Older Adults

Stress can increase the possibility of cognitive impairment and decrease the quality of life in older adults. Smart healthcare can deploy quantum machine learning to enable preventive and diagnostic support. This work introduces a unique technique to address stress detection as an anomaly detection problem that uses quantum hybrid support vector machines. With the help of a wearable smartwatch, we mapped baseline sensor reading as normal data and stressed sensor reading as anomaly data using cortisol concentration as the ground truth. We have used quantum computing techniques to explore the complex feature spaces with kernel-based preprocessing. We illustrate the usefulness of our method by doing experimental validation on 40 older adults with the help of the TSST protocol. Our findings highlight that using a limited number of features, quantum machine learning provides improved accuracy compared to classical methods. We also observed that the recall value using quantum machine learning is higher compared to the classical method. The higher recall value illustrates the potential of quantum machine learning in healthcare, as missing anomalies could result in delayed diagnostics or treatment.

quant-ph↗

arXiv2024

Crosstalk Attack Resilient RNS Quantum Addition

As quantum computers scale, the rise of multi-user and cloud-based quantum platforms can lead to new security challenges. Attacks within shared execution environments become increasingly feasible due to the crosstalk noise that, in combination with quantum computer's hardware specifications, can be exploited in form of crosstalk attack. Our work pursues crosstalk attack implementation in ion-trap quantum computers. We propose three novel quantum crosstalk attacks designed for ion trap qubits: (i) Alternate CNOT attack (ii) Superposition Alternate CNOT (SAC) attack (iii) Alternate Phase Change (APC) attack. We demonstrate the effectiveness of proposed attacks by conducting noise-based simulations on a commercial 20-qubit ion-trap quantum computer. The proposed attacks achieve an impressive reduction of up to 42.2% in output probability for Quantum Full Adders (QFA) having 6 to 9-qubit output. Finally, we investigate the possibility of mitigating crosstalk attacks by using Residue Number System (RNS) based Parallel Quantum Addition (PQA). We determine that PQA achieves higher attack resilience against crosstalk attacks in the form of 24.3% to 133.5% improvement in output probability against existing Non Parallel Quantum Addition (NPQA). Through our systematic methodology, we demonstrate how quantum properties such as superposition and phase transition can lead to crosstalk attacks and also how parallel quantum computing can help secure against these attacks.

quant-ph↗

arXiv2024

GTQCP: Greedy Topology-Aware Quantum Circuit Partitioning

We propose Greedy Topology-Aware Quantum Circuit Partitioning (GTQCP), a novel quantum gate circuit partitioning method which partitions circuits by applying a greedy heuristic to the qubit dependency graph of the circuit. GTQCP is compared against three other gate partitioning methods, two of which (QuickPartitioner and ScanPartitioner) are part of the Berkley Quantum Synthesis Toolkit. GTQCP is shown to have 18% run time improvement ratio over the fastest approach (QuickPartitioner), and a 96% improvement over the highest quality approach (ScanPartitioner). The algorithm also demonstrates nearly identical result quality (number of partitions) compared with ScanPartitioner, and a 38% quality improvement over QuickPartitioner.

quant-ph↗

arXiv2024

Peephole Optimization for Quantum Approximate Synthesis

Peephole optimization of quantum circuits provides a method of leveraging standard circuit synthesis approaches into scalable quantum circuit optimization. One application of this technique partitions an entire circuit into a series of peepholes and produces multiple approximations of each partitioned subcircuit. A single approximation of each subcircuit is then selected to form optimized result circuits. We propose a series of improvements to the final phase of this architecture, which include the addition of error awareness and a better method of approximating the correctness of the result. We evaluated these proposed improvements on a set of benchmark circuits using the IBMQ FakeWashington simulator. The results demonstrate that our best-performing method provides an average reduction in Total Variational Distance (TVD) and Jensen-Shannon Divergence (JSD) of 18.2% and 15.8%, respectively, compared with the Qiskit optimizer. This also constitutes an improvement in TVD of 11.4% and JSD of 9.0% over existing solutions.

quant-ph↗

arXiv2024

Anomaly Detection for Real-World Cyber-Physical Security using Quantum Hybrid Support Vector Machines

Cyber-physical control systems are critical infrastructures designed around highly responsive feedback loops that are measured and manipulated by hundreds of sensors and controllers. Anomalous data, such as from cyber-attacks, greatly risk the safety of the infrastructure and human operators. With recent advances in the quantum computing paradigm, the application of quantum in anomaly detection can greatly improve identification of cyber-attacks in physical sensor data. In this paper, we explore the use of strong pre-processing methods and a quantum-hybrid Support Vector Machine (SVM) that takes advantage of fidelity in parameterized quantum circuits to efficiently and effectively flatten extremely high dimensional data. Our results show an F-1 Score of 0.86 and accuracy of 87% on the HAI CPS dataset using an 8-qubit, 16-feature quantum kernel, performing equally to existing work and 14% better than its classical counterpart.

quant-ph↗

arXiv2024

Transfer Learning Based Hybrid Quantum Neural Network Model for Surface Anomaly Detection

The rapid increase in the volume of data increased the size and complexity of the deep learning models. These models are now more resource-intensive and time-consuming for training than ever. This paper presents a quantum transfer learning (QTL) based approach to significantly reduce the number of parameters of the classical models without compromising their performance, sometimes even improving it. Reducing the number of parameters reduces overfitting problems and training time and increases the models' flexibility and speed of response. For illustration, we have selected a surface anomaly detection problem to show that we can replace the resource-intensive and less flexible anomaly detection system (ADS) with a quantum transfer learning-based hybrid model to address the frequent emergence of new anomalies better. We showed that we could reduce the total number of trainable parameters up to 90% of the initial model without any drop in performance.

quant-ph↗

arXiv2024

Quantum Machine Learning for Anomaly Detection in Consumer Electronics

Anomaly detection is a crucial task in cyber security. Technological advancement brings new cyber-physical threats like network intrusion, financial fraud, identity theft, and property invasion. In the rapidly changing world, with frequently emerging new types of anomalies, classical machine learning models are insufficient to prevent all the threats. Quantum Machine Learning (QML) is emerging as a powerful computational tool that can detect anomalies more efficiently. In this work, we have introduced QML and its applications for anomaly detection in consumer electronics. We have shown a generic framework for applying QML algorithms in anomaly detection tasks. We have also briefly discussed popular supervised, unsupervised, and reinforcement learning-based QML algorithms and included five case studies of recent works to show their applications in anomaly detection in the consumer electronics field.

quant-ph↗

arXiv2024

A Logarithmic Depth Quantum Carry-Lookahead Modulo $(2^n-1)$ Adder

Quantum Computing is making significant advancements toward creating machines capable of implementing quantum algorithms in various fields, such as quantum cryptography, quantum image processing, and optimization. The development of quantum arithmetic circuits for modulo addition is vital for implementing these quantum algorithms. While it is ideal to use quantum circuits based on fault-tolerant gates to overcome noise and decoherence errors, the current Noisy Intermediate Scale Quantum (NISQ) era quantum computers cannot handle the additional computational cost associated with fault-tolerant designs. Our research aims to minimize circuit depth, which can reduce noise and facilitate the implementation of quantum modulo addition circuits on NISQ machines. This work presents quantum carry-lookahead modulo $(2^n - 1)$ adder (QCLMA), which is designed to receive two n-bit numbers and perform their addition with an O(log n) depth. Compared to existing work of O(n) depth, our proposed QCLMA reduces the depth and helps increase the noise fidelity. In order to increase error resilience, we also focus on creating a tree structure based Carry path, unlike the chain based Carry path of the current work. We run experiments on Quantum Computer IBM Cairo to evaluate the performance of the proposed QCLMA against the existing work and define Quantum State Fidelity Ratio (QSFR) to quantify the closeness of the correct output to the top output. When compared against existing work, the proposed QCLMA achieves a 47.21% increase in QSFR for 4-qubit modulo addition showcasing its superior noise fidelity.

quant-ph↗