Searcharxiv⌕ Search

arXiv subjects

Hirley Alves

Publications and source records attributed to Hirley Alves.

At least 37 records · Page 2Linked to original sources

Conservative and Risk-Aware Offline Multi-Agent Reinforcement Learning

Reinforcement learning (RL) has been widely adopted for controlling and optimizing complex engineering systems such as next-generation wireless networks. An important challenge in adopting RL is the need for direct access to the physical environment. This limitation is particularly severe in multi-agent systems, for which conventional multi-agent reinforcement learning (MARL) requires a large number of coordinated online interactions with the environment during training. When only offline data is available, a direct application of online MARL schemes would generally fail due to the epistemic uncertainty entailed by the lack of exploration during training. In this work, we propose an offline MARL scheme that integrates distributional RL and conservative Q-learning to address the environment's inherent aleatoric uncertainty and the epistemic uncertainty arising from the use of offline data. We explore both independent and joint learning strategies. The proposed MARL scheme, referred to as multi-agent conservative quantile regression, addresses general risk-sensitive design criteria and is applied to the trajectory planning problem in drone networks, showcasing its advantages.

cs.LG↗

On the Spectral Efficiency of Movable and Rotary Antenna Arrays under Rician Fading

Most works evaluating the performance of Multi-User Multiple-Input Multiple-Output (MU-MIMO) systems consider Access Points (APs) with fixed antennas, that is, without any movement capability. Recently, the idea of APs with antenna arrays that are able to move have gained traction among the research community. Many works evaluate the communications performance of Movable Antenna Arrays (MAAs) that can move on the horizontal plane. However, they require a very bulky, complex and expensive movement system. In this work, we propose a simpler and cheaper alternative: the utilization of Rotary Antenna Arrays (RAA)s, i.e. antenna arrays that can rotate. We also analyze the performance of a system in which the array is able to both move and rotate. The movements and/or rotations of the array are computed in order to maximize the mean per-user achievable spectral efficiency, based on estimates of the locations of the active devices and using particle swarm optimization. We adopt a spatially correlated Rician fading channel model, and evaluate the resulting optimized performance of the different setups in terms of mean per-user achievable spectral efficiencies. Our numerical results show that both the optimal rotations and movements of the arrays can provide substantial performance gains when the line-of-sight components of the channel vectors are strong. Moreover, the simpler RAAs can outperform the MAAs when their movement area is constrained.

eess.SP↗

Distributed MIMO Networks with Rotary ULAs for Indoor Scenarios under Rician Fading

The Fifth-Generation (5G) wireless communications networks introduced native support for Machine-Type Communications (MTC) use cases. Nevertheless, current 5G networks cannot fully meet the very stringent requirements regarding latency, reliability, and number of connected devices of most MTC use cases. Industry and academia have been working on the evolution from 5G to Sixth Generation (6G) networks. One of the main novelties is adopting Distributed Multiple-Input Multiple-Output (D-MIMO) networks. However, most works studying D-MIMO consider antenna arrays with no movement capabilities, even though some recent works have shown that this could bring substantial performance improvements. In this work, we propose the utilization of Access Points (APs) equipped with Rotary Uniform Linear Arrays (RULAs) for this purpose. Considering a spatially correlated Rician fading model, the optimal angular position of the RULAs is jointly computed by the central processing unit using particle swarm optimization as a function of the location of the active devices. Considering the impact of imperfect location estimates, our numerical results show that the RULAs's optimal rotation brings substantial performance gains in terms of mean per-user spectral efficiency. The improvement grows with the strength of the line-of-sight components of the channel vectors. Given the total number of antenna elements, we study the trade-off between the number of APs and the number of antenna elements per AP, revealing an optimal number of APs for the cases of APs equipped with static ULAs and RULAs.

eess.SP↗

An Analysis of Minimum Error Entropy Loss Functions in Wireless Communications

This paper introduces the minimum error entropy (MEE) criterion as an advanced information-theoretic loss function tailored for deep learning applications in wireless communications. The MEE criterion leverages higher-order statistical properties, offering robustness in noisy scenarios like Rayleigh fading and impulsive interference. In addition, we propose a less computationally complex version of the MEE function to enhance practical usability in wireless communications. The method is evaluated through simulations on two critical applications: over-the-air regression and indoor localization. Results indicate that the MEE criterion outperforms conventional loss functions, such as mean squared error (MSE) and mean absolute error (MAE), achieving significant performance improvements in terms of accuracy, over $20 \%$ gain over traditional methods, and convergence speed across various channel conditions. This work establishes MEE as a promising alternative for wireless communication tasks in deep learning models, enabling better resilience and adaptability.

cs.IT↗

On the Spectral Efficiency of D-MIMO Networks under Rician Fading

Contemporary wireless communications systems adopt the Multi-User Multiple-Input Multiple-Output (MU-MIMO) technique: a single base station or Access Point (AP) equipped with multiple antenna elements serves multiple active users simultaneously. Aiming at providing a more uniform wireless coverage, industry and academia have been working towards the evolution from centralized MIMO to Distributed-MIMO. That is, instead of having all the antenna elements co-located at a single AP, multiple APs, each equipped with a few or a single antenna element, jointly cooperate to serve the active users in the coverage area. In this work, we evaluate the performance of different D-MIMO setups under Rician fading, and considering different receive combining schemes. Note that the Rician fading model is convenient for MU-MIMO performance assessment, as it encompasses a wide variety of scenarios. Our numerical results show that the correlation among the channel vectors of different users increases with the Rician factor, which leads to a reduction on the achievable Spectral Efficiency (SE). Moreover, given a total number of antenna elements, there is an optimal number of APs and antenna elements per AP that provides the best performance. This "sweet spot" depends on the Rician factor and on the adopted receive combining scheme.

cs.IT↗

Semantic Meta-Split Learning: A TinyML Scheme for Few-Shot Wireless Image Classification

Semantic and goal-oriented (SGO) communication is an emerging technology that only transmits significant information for a given task. Semantic communication encounters many challenges, such as computational complexity at end users, availability of data, and privacy-preserving. This work presents a TinyML-based semantic communication framework for few-shot wireless image classification that integrates split-learning and meta-learning. We exploit split-learning to limit the computations performed by the end-users while ensuring privacy-preserving. In addition, meta-learning overcomes data availability concerns and speeds up training by utilizing similarly trained tasks. The proposed algorithm is tested using a data set of images of hand-written letters. In addition, we present an uncertainty analysis of the predictions using conformal prediction (CP) techniques. Simulation results show that the proposed Semantic-MSL outperforms conventional schemes by achieving 20 % gain on classification accuracy using fewer data points, yet less training energy consumption.

cs.CV↗

Experiment-based Models for Air Time and Current Consumption of LoRaWAN LR-FHSS

Long Range - Frequency Hopping Spread Spectrum (LR-FHSS) is an emerging and promising technology recently introduced into the LoRaWAN protocol specification for both terrestrial and non-terrestrial networks, notably satellites. The higher capacity, long-range and robustness to Doppler effect make LR-FHSS a primary candidate for direct-to-satellite (DtS) connectivity for enabling Internet-of-things (IoT) in remote areas. The LR-FHSS devices envisioned for DtS IoT will be primarily battery-powered. Therefore, it is crucial to investigate the current consumption characteristics and Time-on-Air (ToA) of LR-FHSS technology. However, to our knowledge, no prior research has presented the accurate ToA and current consumption models for this newly introduced scheme. This paper addresses this shortcoming through extensive field measurements and the development of analytical models. Specifically, we have measured the current consumption and ToA for variable transmit power, message payload, and two new LR-FHSS-based Data Rates (DR8 and DR9). We also develop current consumption and ToA analytical models demonstrating a strong correlation with the measurement results exhibiting a relative error of less than 0.3%. Thus, it confirms the validity of our models. Conversely, the existing analytical models exhibit a higher relative error rate of -9.2 to 3.4% compared to our measurement results. The presented in this paper results can be further used for simulators or in analytical studies to accurately model the on-air time and energy consumption of LR-FHSS devices.

cs.ET↗

LR-FHSS-Sim: A Discrete-Event Simulator for LR-FHSS Networks

This work presents the LR-FHSS-Sim, a free and open-source discrete-event simulator for LR-FHSS networks. We highlight the importance of network modeling for IoT coverage, especially when it is needed to capture dynamic network behaviors. Written in Python, we present the LR-FHSS-Sim main structure, procedures, and extensions. We discuss the importance of a modular code, which facilitates the creation of algorithmic strategies and signal-processing techniques for LR-FHSS networks. Moreover, we showcase how to achieve results when considering different packet generation traffic patterns and with a previously published extension. Finally, we discuss our thoughts on future implementations and what can be achieved with them.

cs.NI↗

EVT-enriched Radio Maps for URLLC

This paper introduces a sophisticated and adaptable framework combining extreme value theory with radio maps to spatially model extreme channel conditions accurately. Utilising existing signal-to-noise ratio (SNR) measurements and leveraging Gaussian processes, our approach predicts the tail of the SNR distribution, which entails estimating the parameters of a generalised Pareto distribution, at unobserved locations. This innovative method offers a versatile solution adaptable to various resource allocation challenges in ultra-reliable low-latency communications. We evaluate the performance of this method in a rate maximisation problem with defined outage constraints and compare it with a benchmark in the literature. Notably, the proposed approach meets the outage demands in a larger percentage of the coverage area and reaches higher transmission rates.

cs.NI↗

Energy-Efficient Analog Beamforming for RF-WET with Charging Time Constraint

Internet of Things (IoT) sustainability may hinge on radio frequency wireless energy transfer (RF-WET). However, energy-efficient charging strategies are still needed, motivating our work. Specifically, this letter proposes a time division scheme to efficiently charge low-power devices in an IoT network. For this, a multi-antenna power beacon (PB) drives the devices' energy harvesting circuit to the highest power conversion efficiency point via energy beamforming, thus achieving minimum energy consumption. Herein, we adopt the analog multi-antenna architecture due to its low complexity, cost, and energy consumption. The proposal includes a simple yet accurate model for the transfer characteristic of the energy harvesting circuit, enabling the optimization framework. The results evince the effectiveness of our RF-WET strategy over a benchmark scheme where the PB charges all the IoT devices simultaneously. Furthermore, the performance increases with the number of PB antennas.

eess.SP↗

A Multi-Task Oriented Semantic Communication Framework for Autonomous Vehicles

Task-oriented semantic communication is an emerging technology that transmits only the relevant semantics of a message instead of the whole message to achieve a specific task. It reduces latency, compresses the data, and is more robust in low SNR scenarios. This work presents a multi-task-oriented semantic communication framework for connected and autonomous vehicles (CAVs). We propose a convolutional autoencoder (CAE) that performs the semantic encoding of the road traffic signs. These encoded images are then transmitted from one CAV to another CAV through satellite in challenging weather conditions where visibility is impaired. In addition, we propose task-oriented semantic decoders for image reconstruction and classification tasks. Simulation results show that the proposed framework outperforms the conventional schemes, such as QAM-16, regarding the reconstructed image's similarity and the classification's accuracy. In addition, it can save up to 89 % of the bandwidth by sending fewer bits.

cs.NI↗

Traffic Learning and Proactive UAV Trajectory Planning for Data Uplink in Markovian IoT Models

The age of information (AoI) is used to measure the freshness of the data. In IoT networks, the traditional resource management schemes rely on a message exchange between the devices and the base station (BS) before communication which causes high AoI, high energy consumption, and low reliability. Unmanned aerial vehicles (UAVs) as flying BSs have many advantages in minimizing the AoI, energy-saving, and throughput improvement. In this paper, we present a novel learning-based framework that estimates the traffic arrival of IoT devices based on Markovian events. The learning proceeds to optimize the trajectory of multiple UAVs and their scheduling policy. First, the BS predicts the future traffic of the devices. We compare two traffic predictors: the forward algorithm (FA) and the long short-term memory (LSTM). Afterward, we propose a deep reinforcement learning (DRL) approach to optimize the optimal policy of each UAV. Finally, we manipulate the optimum reward function for the proposed DRL approach. Simulation results show that the proposed algorithm outperforms the random-walk (RW) baseline model regarding the AoI, scheduling accuracy, and transmission power.

cs.LG↗

Statistical Tools and Methodologies for Ultrareliable Low-Latency Communications -- A Tutorial

Ultra-reliable low-latency communication (URLLC) constitutes a key service class of the fifth generation and beyond cellular networks. Notably, designing and supporting URLLC poses a herculean task due to the fundamental need to identify and accurately characterize the underlying statistical models in which the system operates, e.g., interference statistics, channel conditions, and the behavior of protocols. In general, multi-layer end-to-end approaches considering all the potential delay and error sources and proper statistical tools and methodologies are inevitably required for providing strong reliability and latency guarantees. This paper contributes to the body of knowledge in the latter aspect by providing a tutorial on several statistical tools and methodologies that are useful for designing and analyzing URLLC systems. Specifically, we overview the frameworks related to i) reliability theory, ii) short packet communications, iii) inequalities, distribution bounds, and tail approximations, iv) rare events simulation, vi) queuing theory and information freshness, and v) large-scale tools such as stochastic geometry, clustering, compressed sensing, and mean-field games. Moreover, we often refer to prominent data-driven algorithms within the scope of the discussed tools/methodologies. Throughout the paper, we briefly review the state-of-the-art works using the addressed tools and methodologies, and their link to URLLC systems. Moreover, we discuss novel application examples focused on physical and medium access control layers. Finally, key research challenges and directions are highlighted to elucidate how URLLC analysis/design research may evolve in the coming years.

cs.NI↗

Sustainable RF Wireless Energy Transfer for Massive IoT: enablers and challenges

Reliable energy supply remains a crucial challenge in the Internet of Things (IoT). Although relying on batteries is cost-effective for a few devices, it is neither a scalable nor a sustainable charging solution as the network grows massive. Besides, current energy-saving technologies alone cannot cope, for instance, with the vision of zero-energy devices and the deploy-and-forget paradigm which can unlock a myriad of new use cases. In this context, sustainable radio frequency wireless energy transfer emerges as an attractive solution for efficiently charging the next generation of ultra low power IoT devices. Herein, we highlight that sustainable charging is broader than conventional green charging, as it focuses on balancing economy prosperity and social equity in addition to environmental health. We discuss the economic implications of powering energy transmitters with ambient energy sources, and reveal insights on their optimal deployment. Moreover, we overview different methods for modeling the energy arrival process of ambient energy sources and discuss their application in different use cases. We highlight the potential of integrating sustainable WET with energy harvesting from nearby transmitters and discuss enhancements in energy receiver design. We also illustrate the role of different technologies in enabling sustainable WET and exemplify various use cases. Besides, we reveal insights into low-complexity architectures designed at the energy transmitters. We highlight relevant research challenges and candidate solutions.

cs.NI↗

Energy Efficiency Optimization for Subterranean LoRaWAN Using A Reinforcement Learning Approach: A Direct-to-Satellite Scenario

The integration of subterranean LoRaWAN and non-terrestrial networks (NTN) delivers substantial economic and societal benefits in remote agriculture and disaster rescue operations. The LoRa modulation leverages quasi-orthogonal spreading factors (SFs) to optimize data rates, airtime, coverage and energy consumption. However, it is still challenging to effectively assign SFs to end devices for minimizing co-SF interference in massive subterranean LoRaWAN NTN. To address this, we investigate a reinforcement learning (RL)-based SFs allocation scheme to optimize the system's energy efficiency (EE). To efficiently capture the device-to-environment interactions in dense networks, we proposed an SFs allocation technique using the multi-agent dueling double deep Q-network (MAD3QN) and the multi-agent advantage actor-critic (MAA2C) algorithms based on an analytical reward mechanism. Our proposed RL-based SFs allocation approach evinces better performance compared to four benchmarks in the extreme underground direct-to-satellite scenario. Remarkably, MAD3QN shows promising potentials in surpassing MAA2C in terms of convergence rate and EE.

cs.IT↗

Joint Activity Detection and Channel Estimation for Clustered Massive Machine Type Communications

Compressed sensing multi-user detection (CS-MUD) algorithms play a key role in optimizing grant-free (GF) non-orthogonal multiple access (NOMA) for massive machine-type communications (mMTC). However, current CS-MUD algorithms cannot be efficiently parallelized, leading to computationally expensive implementations of joint activity detection and channel estimation (JADCE) as the number of deployed machine-type devices (MTDs) increases. To address this, the present work proposes novel JADCE algorithms that can be applied in parallel for different clusters of MTDs by exploiting the structure of the pilot sequences. These are the approximation error method (AEM)-alternating direction method of multipliers (ADMM), and AEM-sparse Bayesian learning (SBL). Results presented in terms of the normalized mean square error and the probability of miss detection show comparable performance to the conventional algorithms. However, both AEM-ADMM and AEM-SBL algorithms have significantly reduced computational complexity and run times, thus, facilitating network scalability.

eess.SP↗

Age Minimization in Massive IoT via UAV Swarm: A Multi-agent Reinforcement Learning Approach

In many massive IoT communication scenarios, the IoT devices require coverage from dynamic units that can move close to the IoT devices and reduce the uplink energy consumption. A robust solution is to deploy a large number of UAVs (UAV swarm) to provide coverage and a better line of sight (LoS) for the IoT network. However, the study of these massive IoT scenarios with a massive number of serving units leads to high dimensional problems with high complexity. In this paper, we apply multi-agent deep reinforcement learning to address the high-dimensional problem that results from deploying a swarm of UAVs to collect fresh information from IoT devices. The target is to minimize the overall age of information in the IoT network. The results reveal that both cooperative and partially cooperative multi-agent deep reinforcement learning approaches are able to outperform the high-complexity centralized deep reinforcement learning approach, which stands helpless in large-scale networks.

cs.LG↗

Trade-Off Between Beamforming and Macro-Diversity Gains in Distributed mMIMO

Industry and academia have been working towards the evolution from Centralized massive Multiple-Input Multiple-Output (CmMIMO) to Distributed mMIMO (DmMIMO) architectures. Instead of splitting a coverage area into many cells, each served by a single Base Station equipped with several antennas, the whole coverage area is jointly covered by several Access Points (AP) equipped with few or single antennas. Nevertheless, when choosing between deploying more APs with few or single antennas or fewer APs equipped with many antennas, one observes an inherent trade-off between the beamforming and macro-diversity gains that has not been investigated in the literature. Given a total number of antenna elements and total downlink power, under a channel model that takes into account a probability of Line-of-Sight (LoS) as a function of the distance between the User Equipments (UEs) and APs, our numerical results show that there exists a ``sweet spot" on the optimal number of APs and of antenna elements per AP which is a function of the physical dimensions of the coverage area.

cs.IT↗