arXiv subjects

Hiroaki Sukegawa

Publications and source records attributed to Hiroaki Sukegawa.

At least 19 recordsLinked to original sources

arXiv2026

Probing Spin Configurations in Exchange-Coupled Magnetic Bilayers with Orthogonal Anisotropies via Anomalous Hall and Nernst Effects

When two ferromagnetic thin films with different magnetic easy axes are coupled via the exchange interaction, the magnetization process becomes nontrivial. In this paper, we demonstrate that three-dimensional magnetization information in such a bilayer system can be accessed electrically by combining measurements of the anomalous Hall effect (AHE) and anomalous Nernst effect (ANE). Specifically, we investigate a CoFe$_2$O$_4$(001)/Fe bilayer, where the insulating nature of CoFe$_2$O$_4$ ensures that these transport measurements selectively probe only the conductive Fe layer. By combining the AHE and ANE results and comparing them with a simple micromagnetic simulation, we probe the magnetic configuration of antiferromagnetically coupled Fe layer and suggest the emergence of a twisted magnetic structure near the interface.

cond-mat.mtrl-sci↗

arXiv2025

Evidence for single variant in altermagnetic RuO2(101) thin films

Altermagnetism presents intriguing possibilities for spintronic devices due to its unique combination of strong spin-splitting and zero net magnetization. However, realizing its full potential hinges on fabricating single-variant altermagnetic thin films. In this work, we present definitive evidence for the formation of single-variant altermagnetic RuO2(101) thin films with fully epitaxial growth on Al2O3(1-102) r-plane substrates, confirmed through rigorous structural analyses using X-ray diffraction, atomic-resolution transmission electron microscopy and X-ray magnetic linear dichroism. The mutual correspondence of the occupancy of oxygen atoms on the surfaces of RuO2(101)[010] and Al2O3(1-102)[11-20] plays a decisive role in the formation of the single-variant RuO2, which is also supported by our first-principles density functional theory calculations. We further observed spin-splitting magnetoresistance in the single-variant RuO2(101)/CoFeB bilayers, highlighting the characteristic effect of single variant on spin transport. The demonstration of single-variant RuO2(101) films marks a significant advancement in the field of altermagnetism and paves the way for exploring their potential applications.

cond-mat.mtrl-sci↗

arXiv2025

Theory for Tunnel Magnetoresistance Oscillation

The universal oscillation of the tunnel magnetoresistance (TMR) ratio as a function of the insulating barrier thickness in crystalline magnetic tunnel junctions (MTJs) is a long-standing unsolved problem in condensed matter physics. To explain this, we here introduce a superposition of wave functions with opposite spins and different Fermi momenta, based on the fact that spin-flip scattering near the interface provides a hybridization between majority- and minority-spin states. In a typical Fe/MgO/Fe MTJ, we solve the tunneling problem and show that the TMR ratio oscillates with a period of $\sim3\,$Å by varying the MgO thickness, consistent with previous and present experimental observations.

cond-mat.mtrl-sci↗

arXiv2025

Reversal of Spin-torque Polarity with Inverting Current Vorticity in Composition-graded Layer at the Ti/W Interface

While compositional gradient-induced spin-current generation has been explored, its microscopic mechanisms remain poorly understood. Here, the contribution of polarity of compositional gradient on spin-current generation is explored. A nanoscale compositional gradient, formed by in-situ atomic diffusion of ultrathin Ti and W layers, is introduced between 10-nm-thick W and Ti layers. Spin-torque ferromagnetic resonance in ferromagnetic Ni95Cu5 deposited on this gradient reveals that a moderate compositional gradient suppresses negative spin torque from the spin Hall effect in W. In contrast, reversing the Ti/W stacking order, which inverts the gradient, suppresses positive spin torque from the orbital Hall effect in Ti. These findings suggest that the sign of spin torque is governed by the polarity of compositional gradient, providing a novel strategy for efficient spin-torque generation without relying on materials with strong spin or orbital Hall effect.

cond-mat.mtrl-sci↗

arXiv2023

Fully epitaxial fcc(111) magnetic tunnel junctions with a Co90Fe10/MgAlO/Co90Fe10 structure

Magnetic tunnel junctions (MTJs) with bcc(001)-type structures such as Fe(001)/MgO(001)/Fe(001), have been widely used as the core of various spintronic devices such as magnetoresistive memories; however, the limited material selection of (001)-type MTJs hinders the further development of spintronic devices. Here, as an alternative to the (001)-type MTJs, an fcc(111)-type MTJ using a fully epitaxial CoFe/rock-salt MgAlO (MAO)/CoFe is explored to introduce close-packed lattice systems into MTJs. Using an atomically flat Ru(0001) epitaxial buffer layer, fcc(111) epitaxial growth of the CoFe/MAO/CoFe trilayer is achieved. Sharp CoFe(111)/MAO(111) interfaces are confirmed due to the introduction of periodic dislocations by forming a 5:6 in-plane lattice matching structure. The fabricated (111) MTJ exhibits a tunnel magnetoresistance ratio of 37% at room temperature (47% at 10 K). Symmetric differential conductance curves with respect to bias polarity are observed, indicating the achievement of nearly identical upper and lower MAO interface qualities. Despite the charge-uncompensated (111) orientation for a rock-salt-like MAO barrier, the achievement of flat, stable, and spin-polarized barrier interfaces opens a promising avenue for expanding the design of MTJ structures.

cond-mat.mtrl-sci↗

arXiv2022

Band-folding-driven high tunnel magnetoresistance ratios in (111)-oriented junctions with SrTiO$_3$ barriers

We theoretically study the tunnel magnetoresistance (TMR) effect in (111)-oriented magnetic tunnel junctions (MTJs) with SrTiO$_{3}$ barriers, Co/SrTiO$_{3}$/Co(111) and Ni/SrTiO$_{3}$/Ni(111). Our analysis combining the first-principles calculation and the Landauer formula shows that the Co-based MTJ has a high TMR ratio over 500%, while the Ni-based MTJ has a smaller value (290%). Since the in-plane lattice periodicity of SrTiO$_{3}$ is about twice that of the primitive cell of fcc Co (Ni), the original bands of Co (Ni) are folded in the $k_x$-$k_y$ plane corresponding to the $ab$ plane of the MTJ supercell. We find that this band folding gives a half-metallic band structure in the $Λ_1$ state of Co (Ni) and the coherent tunneling of such a half-metallic $Λ_1$ state yields a high TMR ratio. We also reveal that the difference in the TMR ratio between the Co- and Ni-based MTJs can be understood by different $s$-orbital weights in the $Λ_1$ band at the Fermi level.

cond-mat.mtrl-sci↗

arXiv2022

Giant oscillatory tunnel magnetoresistance in CoFe/MgO/CoFe(001) junctions

The tunnel magnetoresistance (TMR) effect observed in magnetic tunnel junctions (MTJs) is commonly used in many spintronic applications because the effect can easily convert from local magnetic states to electric signals in a wide range of device resistances. In this study, we demonstrated TMR ratios of up to 631% at room temperature (RT), which is two or more times larger than those used currently for magnetoresistive random access memory (MRAM) devices, using CoFe/MgO/CoFe(001) epitaxial MTJs. The TMR ratio increased up to 1143% at 10 K, which corresponds to an effective tunneling spin polarization of 0.923. The observed large TMR ratios resulted from the fine-tuning of atomic-scale structures of the MTJs, such as crystallographic orientations and MgO interface oxidation, in which the well-known Delta1 coherent tunneling mechanism for the giant TMR effect is expected to be pronounced. However, behavior that is not covered by the standard coherent tunneling theory was unexpectedly manifested; i.e., (i) TMR saturation at a thick MgO barrier region and (ii) enhanced TMR oscillation with a 0.32 nm period in MgO thickness. Particularly, the TMR oscillatory behavior dominates the transport in a wide range of MgO thicknesses; the peak-to-valley difference of the TMR oscillation exceeded 140% at RT, attributable to the appearance of large oscillatory components in resistance area product (RA). Further, we found that the oscillatory behaviors of the TMR ratio and RA survive, even under a +-1 V bias voltage application, indicating the robustness of the oscillation. Our demonstration of the giant RT-TMR ratio will be an essential step for establishing spintronic architectures, such as large-capacity MRAMs and spintronic artificial neural networks. More essentially, the present observations can trigger us to revisit the true TMR mechanism in crystalline MTJs.

cond-mat.mtrl-sci↗

arXiv2021

Enhanced Tunnel magnetoresistance in Fe/Mg4Al-Ox/Fe(001) Magnetic Tunnel Junctions

Spinel MgAl2O4 and family oxides are emerging barrier materials useful for magnetic tunnel junctions (MTJs). We report large tunnel magnetoresistance (TMR) ratios up to 429% at room temperature (RT) and 1,034% at 10 K in a Fe/MgAl2O4/Fe(001)-based MTJ prepared using electron-beam evaporation of Mg4Al-Ox. Resistance oscillations with a MTJ barrier thickness of 0.3-nm were significantly enhanced compared to those of a Fe/MgO/Fe(001) MTJ, resulting in a large TMR oscillation peak-to-valley difference of 125% at RT. The differential conductance spectra were symmetric with bias polarity, and the spectrum in the parallel magnetization state at low temperature demonstrate significant peaks within broad local minima at |0.2-0.6| V, indicating improved barrier interfaces by the Mg4Al-Ox barrier. This study demonstrates that TMR ratios in Fe(001)-MTJs can still be improved.

cond-mat.mtrl-sci↗

arXiv2021

Strain Engineering of Magnetic Anisotropy in Epitaxial Films of Cobalt Ferrite

Perpendicular magnetic anisotropy (PMA) energy up to $K_{\mathrm{u}}=6.1\pm0.8$ MJ m$^{-3}$ is demonstrated in this study by inducing large lattice-distortion exceeding 3% at room temperature in epitaxially distorted cobalt ferrite Co$ _{x} $Fe$ _{3-x} $O$ _{4} $ (x = 0.72) (001) thin films. Although the thin film materials include no rare-earth elements or noble metals, the observed $ K_{u} $ is larger than that of the neodymium-iron-boron compounds for high-performance permanent magnets. The large PMA is attributed to the significantly enhanced magneto-elastic effects, which are pronounced in distorted films with epitaxial lattice structures upon introducing a distortion control layer of composition Mg$ _{2-x} $Sn$_{1+x}$O$ _{4} $. Surprisingly, the induced $ K_{u} $ can be quantitatively explained in terms of the agreement between the local crystal field of Co$ ^{2+} $ and the phenomenological magneto-elastic model, indicating that the linear response of induced $K_u$ is sufficiently valid even under lattice distortions as large as 3.2%. Controlling tetragonal lattice deformation using a non-magnetic spinel layer for ferrites could be a promising protocol for developing materials with large magnetic anisotropies.

cond-mat.mtrl-sci↗

arXiv2021

Spin Hall effect in a spin-1 chiral semimetal

Spin-1 chiral semimetal is a new state of quantum matter hosting unconventional chiral fermions that extend beyond the common Dirac and Weyl fermions. B20-type CoSi is a prototypal material that accommodates such an exotic quasiparticle. To date, the spin transport properties in the spin-1 chiral semimetals, have not been explored yet. In this work, we fabricated B20-CoSi thin films on sapphire c-plane substrates by magnetron sputtering and studied the spin Hall effect (SHE) by combining experiments and first-principles calculations. The SHE of CoSi using CoSi/CoFeB/MgO heterostructures was investigated via spin Hall magnetoresistance and harmonic Hall measurements. First-principles calculations yield an intrinsic spin Hall conductivity (SHC) at the Fermi level that is consistent with the experiments and reveal its unique Fermi-energy dependence. Unlike the Dirac and Weyl fermion-mediated Hall conductivities that exhibit a peak-like structure centering around the topological node, SHC of B20-CoSi is odd and crosses zero at the node with two antisymmetric local extrema of opposite sign situated below and above in energy. Hybridization between Co d-Si p orbitals and spin-orbit coupling are essential for the SHC, despite the small (~1%) weight of Si p-orbital near the Fermi level. This work expands the horizon of topological spintronics and highlights the importance of Fermi-level tuning in order to fully exploit the topology of spin-1 chiral fermions for spin current generation.

cond-mat.mtrl-sci↗

arXiv2021

Quantum-well tunneling anisotropic magnetoresistance above room temperature

Quantum-well (QW) devices have been extensively investigated in semiconductor structures. More recently, spin-polarized QWs were integrated into magnetic tunnel junctions (MTJs). In this work, we demonstrate the spin-based control of the quantized states in iron $3d$-band QWs, as observed in experiments and theoretical calculations. We find that the magnetization rotation in the Fe QWs significantly shifts the QW quantization levels, which modulate the resonant-tunneling current in MTJs, resulting in a tunneling anisotropic magnetoresistance (TAMR) effect of QWs. This QW-TAMR effect is sizable compared to other types of TAMR effect, and it is present above the room-temperature. In a QW MTJ of Cr/Fe/MgAl$_2$O$_4$/top electrode, where the QW is formed by a mismatch between Cr and Fe in the $d$ band with $Δ_1$ symmetry, a QW-TAMR ratio of up to 5.4 % was observed at 5 K, which persisted to 1.2 % even at 380K. The magnetic control of QW transport can open new applications for spin-coupled optoelectronic devices, ultra-thin sensors, and memories.

cond-mat.mes-hall↗

arXiv2021

Interfacial giant tunnel magnetoresistance and bulk-induced large perpendicular magnetic anisotropy in (111)-oriented junctions with fcc ferromagnetic alloys: A first-principles study

We study the tunnel magnetoresistance (TMR) effect and magnetocrystalline anisotropy in a series of magnetic tunnel junctions (MTJs) with $L1_1$-ordered fcc ferromagnetic alloys and MgO barrier along the [111] direction. Considering the (111)-oriented MTJs with different $L1_1$ alloys, we calculate their TMR ratios and magnetocrystalline anisotropies on the basis of the first-principles calculations. The analysis shows that the MTJs with Co-based alloys (CoNi, CoPt, and CoPd) have high TMR ratios over 2000$\%$. These MTJs have energetically favored Co-O interfaces where interfacial antibonding between Co $d$ and O $p$ states is formed around the Fermi level. We find that the resonant tunneling of the antibonding states, called the interface resonant tunneling, is the origin of the obtained high TMR ratios. Our calculation of the magnetocrystalline anisotropy shows that many $L1_1$ alloys have large perpendicular magnetic anisotropy (PMA). In particular, CoPt has the largest value of anisotropy energy $K_{\rm u} \approx 10\,{\rm MJ/m^3}$. We further conduct a perturbation analysis of the PMA with respect to the spin-orbit interaction and reveal that the large PMA in CoPt and CoNi mainly originates from spin-conserving perturbation processes around the Fermi level.

cond-mat.mtrl-sci↗

arXiv2021

Magnetization switching induced by spin-orbit torque from Co2MnGa magnetic Weyl semimetal thin films

This study reports the magnetization switching induced by spin-orbit torque (SOT) from the spin current generated in Co2MnGa magnetic Weyl semimetal (WSM) thin films. We deposited epitaxial Co2MnGa thin films with highly B2-ordered structure on MgO(001) substrates. The SOT was characterized by harmonic Hall measurements in a Co2MnGa/Ti/CoFeB heterostructure and a relatively large spin Hall efficiency of -7.8% was obtained.The SOT-induced magnetization switching of the perpendicularly magnetized CoFeB layer was further demonstrated using the structure. The symmetry of second harmonic signals, thickness dependence of spin Hall efficiency, and shift of anomalous Hall loops under applied currents were also investigated. This study not only contributes to the understanding of the mechanisms of spin-current generation from magnetic-WSM-based heterostructures, but also paves a way for the applications of magnetic WSMs in spintronic devices.

cond-mat.mtrl-sci↗

arXiv2020

Exceeding 400% tunnel magnetoresistance at room temperature in epitaxial Fe/MgO/Fe(001) spin-valve-type magnetic tunnel junctions

Giant tunnel magnetoresistance (TMR) ratios of 417% at room temperature (RT) and 914% at 3 K were demonstrated in epitaxial Fe/MgO/Fe(001) exchanged-biased spin-valve magnetic tunnel junctions (MTJs) by tuning growth conditions for each layer, combining sputter deposition for the Fe layers, electron-beam evaporation of the MgO barrier, and barrier interface tuning. Clear TMR oscillation as a function of the MgO thickness with a large peak-to-valley difference of ~80% was observed when the layers were grown on a highly (001)-oriented Cr buffer layer. Specific features of the observed MTJs are symmetric differential conductance (dI/dV) spectra for the bias polarity and plateau-like deep local minima in dI/dV (parallel configuration) at |V| = 0.2~0.5 V. At 3K, fine structures with two dips emerge in the plateau-like dI/dV, reflecting highly coherent tunneling through the Fe/MgO/Fe. We also observed a 496% TMR ratio at RT by a 2.24-nm-thick-CoFe insertion at the bottom-Fe/MgO interface.

cond-mat.mtrl-sci↗

arXiv2020

Voltage-controlled magnetic anisotropy under the electronic structure modulation in quantum wells

Voltage-controlled magnetic anisotropy (VCMA) offers an emerging approach to realize energy-efficient magnetization switching in spintronic devices such as magnetic random access memories (MRAMs). Here, we show that manipulating the condensed states, i.e., introducing quantum well (QW) can significantly influence the VCMA in a Cr/Fe-QW/MgAl2O4 based magnetic tunnel junction (MTJ). Only for the MTJ with an even number of Fe atomic layers, we observed a novel A-shaped VCMA curve for a particular QW state, where magnetic anisotropy energy (MAE) reaches a local maximum at zero bias and reduces when applying both positive and negative bias, i.e., a novel bi-polar VCMA effect. Our ab initio calculations demonstrate that the QW states give an additional contribution to perpendicular magnetic anisotropy (PMA), which can explain not only the A-shaped VCMA but also the Fe-layer-number parity dependence of VCMA. The present study suggests that the QW-modulated VCMA should open a new pathway to design VCMA-assisted MRAM.

cond-mat.mtrl-sci↗

arXiv2018

Large perpendicular magnetic anisotropy in epitaxial Fe/MgAl2O4(001) heterostructures

We investigated perpendicular magnetic anisotropy (PMA) and related properties of epitaxial Fe (0.7 nm)/MgAl2O4(001) heterostructures prepared by electron-beam evaporation. Using an optimized structure, we obtained a large PMA energy ~1 MJ/m3 at room temperature, comparable to that in ultrathin-Fe/MgO(001) heterostructures. Both the PMA energy and saturation magnetization show weak temperature dependence, ensuring wide working temperature in application. The effective magnetic damping constant of the 0.7 nm Fe layer was ~0.02 using time-resolved magneto-optical Kerr effect. This study demonstrates capability of the Fe/MgAl2O4 heterostructure for perpendicular magnetic tunnel junctions, as well as a good agreement with theoretical predictions.

cond-mat.mtrl-sci↗

arXiv2017

Nonlinear electric field effect on perpendicular magnetic anisotropy in Fe/MgO interfaces

The electric field effect on magnetic anisotropy was studied in an ultrathin Fe(001) monocrystalline layer sandwiched between Cr buffer and MgO tunnel barrier layers, mainly through post-annealing temperature and measurement temperature dependences. A large coefficient of the electric field effect of more than 200 fJ/Vm was observed in the negative range of electric field, as well as an areal energy density of perpendicular magnetic anisotropy (PMA) of around 600 uJ/m2. More interestingly, nonlinear behavior, giving rise to a local minimum around +100 mV/nm, was observed in the electric field dependence of magnetic anisotropy, being independent of the post-annealing and measurement temperatures. The insensitivity to both the interface conditions and the temperature of the system suggests that the nonlinear behavior is attributed to an intrinsic origin such as an inherent electronic structure in the Fe/MgO interface. The present study can contribute to the progress in theoretical studies, such as ab initio calculations, on the mechanism of the electric field effect on PMA.

cond-mat.mtrl-sci↗

arXiv2017

Spin-wave propagation in cubic anisotropic materials

The information carrier of modern technologies is the electron charge whose transport inevitably generates Joule heating. Spin-waves, the collective precessional motion of electron spins, do not involve moving charges and thus avoid Joule heating. In this respect, magnonic devices in which the information is carried by spin-waves attract interest for low-power computing. However implementation of magnonic devices for practical use suffers from low spin-wave signal and on/off ratio. Here we demonstrate that cubic anisotropic materials can enhance spin-wave signals by improving spin-wave amplitude as well as group velocity and attenuation length. Furthermore, cubic anisotropic material shows an enhanced on/off ratio through a laterally localized edge mode, which closely mimics the gate-controlled conducting channel in traditional field-effect transistors. These attractive features of cubic anisotropic materials will invigorate magnonics research towards wave-based functional devices.

cond-mat.mtrl-sci↗