arXiv subjects

Hiroki Wakatsuchi

Publications and source records attributed to Hiroki Wakatsuchi.

25 records · Page 2Linked to original sources

arXiv2020

Metasurface Sensing Difference in Waveforms at the Same Frequency with Reduced Power Level

We numerically demonstrate a new type of waveform-selective metasurface that senses the difference in incoming waveforms or pulse widths at the same frequency. Importantly, the proposed structure contains precise rectifier circuits that, compared to ordinary schottky diodes used within old types of structures, rectify induced electric charges at a markedly reduced input power level depending on several design parameters but mostly on the gain of operational amplifiers. As a result, a waveform-selective absorbing mechanism related to this turn-on voltage appears even with a limited signal strength that is comparable to realistic wireless signal levels. In addition, the proposed structure exhibits a noticeably wide dynamic range from -30 to 6 dBm, compared to a conventional structure that operated only around 0 dBm. Thus, our study opens up the door to apply the concept of waveform selectivity to a more practical field of wireless communications to control different small signals at the same frequency.

physics.app-ph↗

arXiv2020

Simplified equivalent circuit approach for designing time-domain responses of waveform-selective metasurfaces

In this study, we demonstrate simplified equivalent circuit models to effectively approximate responses of recently reported waveform-selective metasurfaces that distinguish different electromagnetic waves even at the same frequency depending on their waveforms or pulse widths. Compared to conventional equivalent circuit models that represent behaviors of ordinary metasurfaces in the "frequency" domain, the proposed models enable us to explain how waveform-selective metasurfaces respond in the "time" domain. Our approach well estimates not only time constants of waveform-selective metasurfaces but also their entire time-domain responses. Particularly, this study reports the importance of resistive components of diodes as well as the limitation of our models with respect to the power dependence although still the models effectively work when waveform-selective mechanisms are clearly exhibited with a sufficiently large input power. Thus, the idea of the proposed equivalent circuit models contributes not only to a greater understanding of waveform-selective mechanisms but also to facilitating the design process of such unique structures.

physics.app-ph↗

arXiv2019

Waveform Selective Surfaces

The role of frequency is very important in electromagnetics since it may significantly change how a material interacts with an incident wave if the frequency spectrum varies. Here, we demonstrate a new kind of microwave window that has the unique property of controlling transmission and reflection based not only on the frequency of an incoming wave but also on the waveform or pulse width. This surface can preferentially pass or reject different kinds of signals, such as short pulses or continuous waves, even if they occur at the same frequency. Such a structure can be used, for example, to allow long communication signals to pass through, while rejecting short radar pulses in the same frequency band. It is related to the classic frequency selective surface, but adds the new dimension of waveform selectivity, which is only possible by introducing nonlinear electronics into the surface. Thus, our study is expected to provide new solutions to both fundamental and applied electromagnetic issues ranging from traditional antenna design and wireless communications to emerging areas such as cloaking, perfect lenses, and wavefront shaping.

physics.app-ph↗

arXiv2015

Waveform Selectivity at the Same Frequency

Electromagnetic properties depend on the composition of materials, i.e. either angstrom scales of molecules or, for metamaterials, subwavelength periodic structures. Each material behaves differently in accordance with the frequency of an incoming electromagnetic wave due to the frequency dispersion or the resonance of the periodic structures. This indicates that if the frequency is fixed, the material always responds in the same manner unless it has nonlinearity. However, such nonlinearity is controlled by the magnitude of the incoming wave or other bias. Therefore, it is difficult to distinguish different incoming waves at the same frequency. Here we present a new concept of circuit-based metasurfaces to selectively absorb or transmit specific types of waveforms even at the same frequency. The metasurfaces, integrated with schottky diodes as well as either capacitors or inductors, selectively absorb short or long pulses, respectively. The two types of the circuit elements are then combined to absorb or transmit specific waveforms in between. This waveform selectivity gives us another freedom to control electromagnetic waves in various fields including wireless communications, as our simulation reveals that the metasurfaces are capable of varying bit error rates in response to waveforms.

physics.optics↗

arXiv2015

Waveform-selective metasurfaces with normal waves at the same frequency

Waveform-selective metasurfaces, reported by Wakatsuchi et al. in 2014, have enabled us to distinguish different surface waves even at the same frequency in accordance with their waveforms or pulse widths. In this study we demonstrate that such new characteristics are applicable to controlling not only surface waves but also free-space waves normal to metasurfaces. Both simulation and measurement results show selective absorption or transmission for specific pulses at the same frequency. Thus the waveform selectivity is expected to create a wider range of new applications, for instance, waveform-selective antennas and wireless communications.

physics.optics↗

arXiv2014

Waveform-dependent absorbing metasurfaces

We present the first use of a waveform-dependent absorbing metasurface for high-power pulsed surface currents. The new type of nonlinear metasurface, composed of circuit elements including diodes, is capable of storing high power pulse energy to dissipate it between pulses, while allowing propagation of small signals. Interestingly, the absorbing performance varies for high power pulses but not for high power continuous waves (CWs), since the capacitors used are fully charged up. Thus, the waveform dependence enables us to distinguish various signal types (i.e. CW or pulse) even at the same frequency, which potentially creates new kinds of microwave technologies and applications.

physics.optics↗

arXiv2010

Customised broadband metamaterial absorbers for arbitrary polarisation

This paper shows that customised broadband absorption of electromagnetic waves having arbitrary polarisation is possible by use of lossy cut-wire (CW) metamaterials. These useful features are confirmed by numerical simulations in which different lengths of CW pairs are combined as one periodic metamaterial unit and placed near to a perfect electric conductor (PEC). So far metamaterial absorbers have exhibited some interesting features, which are not available from conventional absorbers, e.g. straightforward adjustment of electromagnetic properties and size reduction. The paper shows how with proper design a broad range of absorber characteristics may be obtained.

physics.optics↗