arXiv subjects

Hirotaka Nakamura

Publications and source records attributed to Hirotaka Nakamura.

9 recordsLinked to original sources

arXiv2026

Pulse magnet of 10 T for power laser experiments with x-ray free-electron laser diagnostics

The importance of investigating magnetized plasmas/solids in extreme conditions has grown over the last decades, particularly in the field of high energy density physics (HEDP), such as laboratory astrophysics and inertial confinement fusion. However, up to now, the unique capabilities of an X-ray free-electron laser (XFEL), such as high brilliance and low divergence have never been exploited for this type of research. In this paper, we present the first platform developed at SACLA, Japan, that combines a high-power optical laser for generating matter under extreme conditions of pressure and temperature, an XFEL probe, and an external magnetic field. The high current is produced using a 2 kV, 4.8 kJ pulsed power system giving a maximum current of 10 kA which is synchronized with the optical laser and XFEL in a vacuum environment. It flows through a split-pair coil to generate a high magnetic field (10 T at 6 kA) which has 1 cm access every 45$^{\circ}$ in the equatorial plane and 90$^{\circ}$ in the poloidal one. This platform offers new opportunities to study high-energy-density matter in strong magnetic fields, including shock propagation, instability growth, and turbulent plasma dynamics.

physics.plasm-ph↗

arXiv2026

High Entropy Alloy under Shock Compression: Optical-Pump X-Ray-Probe

High entropy alloys (HEAs) are multi-principal-element alloys designed for tailorable mechanical performance and have been attracting significant engineering interest, yet their fundamental behaviour under extreme dynamic conditions, such as shock loading, remains unexplored. Here, we report laser-shock experiments on two different types of 1-micrometers-thick HEA microfilms, CuPdAgPtAu and CrFeCoNiCuMo, on 25-micrometers-thick black-Kapton ablator driven by a high intensity laser pulse (532 nm, 5 ns, 16 J, 0.5-mm diameter focal spot) and probed by an X-ray free electron laser (XFEL) pulse (12 keV, 7 fs). Time-resolved X-ray diffraction (XRD) shows the formation of a transient phase with a lattice compression up to 5.1% of the CuPdAgPtAu HEA along the (111) plane; this transient compressed phase existed for 0.3 ns. The impedance matching Hugoniot analysis estimated a shock pressure of 55 +/- 6 GPa in the HEA film, while Au- and Fe-based equations of state (EoS) modelling predict 80 GPa (0.8 MBar) at the free HEA surface. The free HEA surface reached maximum velocities of ~ 5 km/s as recorded from in situ monitoring with the velocity interferometry system for any reflector (VISAR) imaging. These initial HEA results show the suitability of HEA sample preparation and XFEL-based XRD characterisation under extreme shock loading, and are promising for experimental determination of the EoS of this emerging class of materials (beamtime proposal No.: 2024A8503 for a 6-hour preliminary experiment).

cond-mat.mtrl-sci↗

arXiv2025

Phase transitions of eutectic high entropy alloy AlCoCrFeNi2.1 under shock compression

High entropy alloys (HEAs) are a new class of metals that exhibit unique mechanical performance. Among HEAs, additively manufactured eutectic high entropy alloys (AM-EHEAs) have recently emerged as candidate materials for use in extreme conditions due to their simultaneous high strength and ductility. However, the deformation and structural evolution of AM-EHEAs under conditions of high pressure have not been well characterized, limiting their use in extreme applications. We present dynamic compression experiments and molecular dynamics simulations studying the structural evolution of AM-EHEA AlCoCrFeNi2.1 when compressed to pressures up to 400 GPa. Our in-situ X-ray diffraction measurements capture the appearance of fcc and bcc phases at different pressure conditions, with pure- and mixed-phase regions. Understanding the phase stability and structural evolution of the AM EHEA offers new insights to guide the development of high-performance complex materials for extreme conditions.

cond-mat.mtrl-sci↗

arXiv2025

Pushing the limits of flow strength in diamond

Extreme pressures and temperatures create conditions that allow even hard and brittle materials to deform plastically. Despite extensive research, the upper limits of flow strength, the resistance to plastic flow, remain uncertain, and the mechanisms driving deformation at the relevant stresses are a subject of debate. Using femtosecond in situ X-ray diffraction experiments and large-scale molecular dynamics simulations, we demonstrate that stacking fault-mediated strengthening enables shock-compressed nano-polycrystalline diamond to achieve a peak flow strength of 107+-5 GPa at a stress of 227+-8 GPa. Our findings show that extreme conditions can unlock unusual strength via mechanisms that can be used as design tools in targeted applications.

cond-mat.mtrl-sci↗

arXiv2024

Comment on "Comments regarding "Transonic dislocation propagation in diamond" by Katagiri, et al. (Science 382, 69-72, 2023)" by Hawreliak, et al. (arXiv:2401.04213)

In their comment (1), Hawreliak et al. claims that our observation of stacking fault formation and transonic dislocation propagation in diamond (2) is not valid as they interpret the observed features as cracks. In this response letter, we describe our rationale for interpreting the observed features as stacking faults. We also address other points raised in their comments, including the clarifications of how the results of Makarov et al. (3) are not in conflict with our study.

cond-mat.mtrl-sci↗

arXiv2024

Shock-driven amorphization and melt in Fe$_2$O$_3$

We present measurements on Fe$_2$O$_3$ amorphization and melt under laser-driven shock compression up to 209(10) GPa via time-resolved in situ x-ray diffraction. At 122(3) GPa, a diffuse signal is observed indicating the presence of a non-crystalline phase. Structure factors have been extracted up to 182(6) GPa showing the presence of two well-defined peaks. A rapid change in the intensity ratio of the two peaks is identified between 145(10) and 151(10) GPa, indicative of a phase change. Present DFT+$U$ calculations of temperatures along Fe$_2$O$_3$ Hugoniot are in agreement with SESAME 7440 and indicate relatively low temperatures, below 2000 K, up to 150 GPa. The non-crystalline diffuse scattering is thus consistent with the - as yet unreported - shock amorphization of Fe$_2$O$_3$ between 122(3) and 145(10) GPa, followed by an amorphous-to-liquid transition above 151(10) GPa. Upon release, a non-crystalline phase is observed alongside crystalline $α$-Fe$_2$O$_3$. The extracted structure factor and pair distribution function of this release phase resemble those reported for Fe$_2$O$_3$ melt at ambient pressure.

cond-mat.mtrl-sci↗

arXiv2023

Transonic Dislocation Propagation in Diamond

The motion of line defects (dislocations) has been studied for over 60 years but the maximum speed at which they can move is unresolved. Recent models and atomistic simulations predict the existence of a limiting velocity of dislocation motions between the transonic and subsonic ranges at which the self-energy of dislocation diverges, though they do not deny the possibility of the transonic dislocations. We use femtosecond x-ray radiography to track ultrafast dislocation motion in shock-compressed single-crystal diamond. By visualizing stacking faults extending faster than the slowest sound wave speed of diamond, we show the evidence of partial dislocations at their leading edge moving transonically. Understanding the upper limit of dislocation mobility in crystals is essential to accurately model, predict, and control the mechanical properties of materials under extreme conditions.

cond-mat.mtrl-sci↗

arXiv2019

Coupling Effects in Multi-Stage Laser Wake-field Acceleration of Electrons

Staging laser wake-field acceleration is considered as a necessary technique for developing full-optical jitter-free electron accelerators. Splitting of the acceleration length into several technical parts with their lengths smaller than the dephasing length and with independent laser drivers allows generation of stable, reproducible acceleration fields. Temporal and spatial coupling of pre-accelerated electron bunches for their injection in the acceleration phase of a successive laser pulse wake field is the key part of the staging laser-driven acceleration. Here, characterization of the coupling is performed with dense, stable, a narrow energy band <3% and energy selectable electron beams with charges ~1.6 pC and energy ~10 MeV generated from a laser plasma cathode. Cumulative focusing of electron bunches in a low density pre-plasma, exhibiting the Budker- Bennett effect, is shown to result in the efficient injection of electrons even with a long distance between the injector and the booster in the laser pulse wake. Measured characteristics of electron beams modified by the booster wake field agree well with those obtained by multidimensional particle-in-cell simulations.

physics.plasm-ph↗

arXiv2015

Insight of breaking of powerful axisymmetrically-polarized laser pulses in under-dense plasma

Interaction of axisymmetrically-polarized (radially or azimuthally-polarized), relativistically intense laser pulses (ALP) with under-dense plasma is shown experimentally to be different from the interaction of conventional Gaussian pulses. The difference is clearly observed in distinct spectra of scattered laser light as well as in appearance of a strong side emission of second harmonic in the vicinity of focus spot. According 3D particle-in-cell simulations, this is a result of instability in the propagation of ALP in under-dense plasma. Laser wakefield acceleration of electrons by ALP, therefore, is less efficient than that by Gaussian laser pulses but ALP may be interesting for efficient electron self-injection.

physics.plasm-ph↗