arXiv subjects

Ho Nyung Lee

Publications and source records attributed to Ho Nyung Lee.

At least 73 records · Page 4Linked to original sources

arXiv2015

Resonant tunneling in a quantum oxide superlattice

Resonant tunnelling is a quantum mechanical process that has long been attracting both scientific and technological attention owing to its intriguing underlying physics and unique applications for high-speed electronics. The materials system exhibiting resonant tunnelling, however, has been largely limited to the conventional semiconductors, partially due to their excellent crystalline quality. Here we show that a deliberately designed transition metal oxide superlattice exhibits a resonant tunnelling behaviour with a clear negative differential resistance. The tunnelling occurred through an atomically thin, lanthanum δ-doped SrTiO3 layer, and the negative differential resistance was realized on top of the bipolar resistance switching typically observed for perovskite oxide junctions. This combined process resulted in an extremely large resistance ratio (~10^5) between the high and low-resistance states. The unprecedentedly large control found in atomically thin δ-doped oxide superlattices can open a door to novel oxide-based high-frequency logic devices.

cond-mat.mtrl-sci↗

arXiv2015

Strain tuning of electronic structure in Bi4Ti3O12-LaCoO3 epitaxial thin films

We investigated the crystal and electronic structures of ferroelectric Bi4Ti3O12 (BiT) single crystalline thin films site-specifically substituted with LaCoO3 (LCO). The epitaxial films were grown by pulsed laser epitaxy on NdGaO3 and SrTiO3 substrates to vary the degree of strain. With increasing the LCO substitution, we observed a systematic increase in the c-axis lattice constant of the Aurivillius phase related with the modification of pseudo-orthorhombic unit cells. These compositional and structural changes resulted in a systematic decrease in the band gap, i.e., the optical transition energy between the oxygen 2p and transition metal 3d states, based on a spectroscopic ellipsometry study. In particular, the Co 3d state seems to largely overlap with the Ti t2g state, decreasing the band gap. Interestingly, the applied tensile strain facilitates the band gap narrowing, demonstrating that epitaxial strain is a useful tool to tune the electronic structure of ferroelectric transition metal oxides.

cond-mat.mtrl-sci↗

arXiv2014

Dimensionality Control of d-orbital Occupation in Oxide Superlattices

Manipulating the orbital state in a strongly correlated electron system is of fundamental and technological importance for exploring and developing novel electronic phases. Here, we report an unambiguous demonstration of orbital occupancy control between t2g and eg multiplets in quasi-twodimensional transition metal oxide superlattices (SLs) composed of a Mott insulator LaCoO3 and a band insulator LaAlO3. As the LaCoO3 sublayer thickness approaches its fundamental limit (i.e. one unit-cell-thick), the electronic state of the SLs changed from a Mott insulator, in which both t2g and eg orbitals are partially filled, to a band insulator by completely filling (emptying) the t2g (eg) orbitals. We found the reduction of dimensionality has a profound effect on the electronic structure evolution, which is, whereas, insensitive to the epitaxial strain. The remarkable orbital controllability shown here offers a promising pathway for novel applications such as catalysis and photovoltaics, where the energy of d level is an essential parameter.

cond-mat.str-el↗

arXiv2014

Growth control of the oxidation state in vanadium oxide thin films

Precise control of the chemical valence or oxidation state of vanadium in vanadium oxide thin films is highly desirable for not only fundamental research, but also technological applications that utilize the subtle change in the physical properties originating from the metal- insulator transition (MIT) near room temperature. However, due to the multivalent nature of vanadium and the lack of a good understanding on growth control of the oxidation state, stabilization of phase pure vanadium oxides with a single oxidation state is extremely challenging. Here, we systematically varied the growth conditions to clearly map out the growth window for preparing phase pure epitaxial vanadium oxides by pulsed laser deposition for providing a guideline to grow high quality thin films with well-defined oxidation states of V2(+3)O3, V(+4)O2, and V2(+5)O5. A well pronounced MIT was only observed in VO2 films grown in a very narrow range of oxygen partial pressure P(O2). The films grown either in lower (< 10 mTorr) or higher P(O2) (> 25 mTorr) result in V2O3 and V2O5 phases, respectively, thereby suppressing the MIT for both cases. We have also found that the resistivity ratio before and after the MIT of VO2 thin films can be further enhanced by one order of magnitude when the films are further oxidized by post-annealing at a well-controlled oxidizing ambient. This result indicates that stabilizing vanadium into a single valence state has to compromise with insufficient oxidation of an as grown thin film and, thereby, a subsequent oxidation is required for an improved MIT behavior.

cond-mat.mtrl-sci↗

arXiv2014

Amplitude Contrast Imaging in High-Resolution Transmission Electron Microscopy of Ferroelectric Superlattice Film

To date, high-resolution electron microscopy has largely relied on using the phase of the exit wave function at the exit surface to form a high-resolution electron microscopic image. We have for the first time used chromatic aberration correction to implement a new imaging mode to achieve amplitude contrast imaging in high-resolution electron microscopy, allowing us to obtain directly interpretable high-resolution electron microscopic images with discrimination between light and heavy atomic columns. Using this imaging approach, we have successfully visualized the atomic structure in a BaTiO3/CaTiO3 superlattice with high spatial accuracy and discrimination between Ba and Ca columns, providing direct visualization of the Ca and Ba associated oxygen octahedral tilt that controls ferroelectric behavior in these superlattice structures. Furthermore, this approach offers new opportunities to unravel the structure in a wide range of materials, especially complex oxides with exotic behaviors based on specific structural arrangements.

cond-mat.mtrl-sci↗

arXiv2014

Oxygen diffusion pathways in brownmillerite SrCoO2.5: Influence of structure and chemical potential

To design and discover new materials for next-generation energy materials such as solid-oxide fuel cells (SOFCs), a fundamental understanding of their ionic properties and behaviors is essential. The potential applicability of a material for SOFCs is critically determined by the activation energy barrier of oxygen along various diffusion pathways. In this work, we investigate interstitial-oxygen (Oi) diffusion in brownmillerite oxide SrCoO2.5, employing a first-principles approach. Our calculations indicate highly anisotropic ionic diffusion pathways, which result from its anisotropic crystal structure. The one-dimensional-ordered oxygen vacancy channels are found to provide the easiest diffusion pathway with an activation energy barrier height of 0.62 eV. The directions perpendicular to the vacancy channels have higher energy barriers for Oint diffusion. In addition, we have studied migration barriers for oxygen vacancies that could be present as point defects within the material. This in turn could also facilitate the transport of oxygen. Interestingly, for oxygen vacancies, the lowest barrier height was found to occur within the octahedral layer with an energy of 0.82 eV. Our results imply that interstitial migration would be highly one-dimensional in nature. Oxygen vacancy transport, on the other hand, could preferentially occur in the two-dimensional octahedral plane.

cond-mat.mtrl-sci↗

arXiv2014

Thermopower enhancement by fractional layer control in 2D oxide superlattices

We have investigated two-dimensional thermoelectric properties in transition metal oxide heterostructures. In particular, we adopted an unprecedented approach to direct tuning of the 2D carrier density using fractionally δ-doped oxide superlattices. By artificially controlling the carrier density in the 2D electron gas that emerges at a LaxSr1-xTiO3 δ-doped layer, we demonstrate that a thermopower as large as 408 μV K-1 can be reached. This approach also yielded a power factor of the 2D carriers 117 μWcm-1K-2, which is one of the largest reported values from transition metal oxide based materials. The promising result can be attributed to the anisotropic band structure in the 2D system, indicating that δ-doped oxide superlattices can be a good candidate for advanced thermoelectrics.

cond-mat.str-el↗

arXiv2014

Active control of magnetoresistance of organic spin valves using ferroelectricity

Organic spintronic devices have been appealing because of the long spin life time of the charge carriers in the organic materials and their low cost, flexibility and chemical diversity. In previous studies, the control of resistance of organic spin valves is generally achieved by the alignment of the magnetization directions of the two ferromagnetic electrodes, generating magnetoresistance.1 Here we employ a new knob to tune the resistance of organic spin valves by adding a thin ferroelectric interfacial layer between the ferromagnetic electrode and the organic spacer. We show that the resistance can be controlled by not only the spin alignment of the two ferromagnetic electrodes, but also by the electric polarization of the interfacial ferroelectric layer: the MR of the spin valve depends strongly on the history of the bias voltage which is correlated with the polarization of the ferroelectric layer; the MR even changes sign when the electric polarization of the ferroelectric layer is reversed. This new tunability can be understood in terms of the change of relative energy level alignment between ferromagnetic electrode and the organic spacer caused by the electric dipole moment of the ferroelectric layer. These findings enable active control of resistance using both electric and magnetic fields, opening up possibility for multi-state organic spin valves and shed light on the mechanism of the spin transport in organic spin valves.

cond-mat.mtrl-sci↗

arXiv2013

Tunneling Electroresistance Induced by Interfacial Phase Transitions in Ultrathin Oxide Heterostructures

The ferroelectric (FE) control of electronic transport is one of the emerging technologies in oxide heterostructures. Many previous studies in FE tunnel junctions (FTJs) exploited solely the differences in the electrostatic potential across the FTJs that are induced by changes in the FE polarization direction. Here, we show that in practice the junction current ratios between the two polarization states can be further enhanced by the electrostatic modification in the correlated electron oxide electrodes, and that FTJs with nanometer thin layers can effectively produce a considerably large electroresistance ratio at room temperature. To understand these surprising results, we employed an additional control parameter, which is related to the crossing of electronic and magnetic phase boundaries of the correlated electron oxide. The FE-induced phase modulation at the heterointerface ultimately results in an enhanced electroresistance effect. Our study highlights that the strong coupling between degrees of freedom across heterointerfaces could yield versatile and novel applications in oxide electronics.

cond-mat.mtrl-sci↗

arXiv2013

Orienting oxygen vacancies for fast catalytic reaction

Catalysis is indispensable to chemical processes and relevant to many aspects of modern life. Owing to the intriguing electronic structures and good ionic properties, multivalent transition metal oxides have attracted attention as key catalysts for various energy and environmental applications. Here, we demonstrate that brownmillerite strontium cobaltite (SrCoO2.5) can be a good cathode material for sold oxide fuel cells and rechargeable batteries due to the open oxygen frameworks. When the orientation of oxygen vacancy channels (OVCs) is properly controlled, one can drastically increase the surface oxygen exchange rate approximately up to two orders of magnitude. The improved oxygen reduction kinetics is attributed to a substantial decrease in the thermal activation energy. Importantly, the strong enhancement of crystallographic orientation-dependent oxygen reduction reaction required the creation of neither structural disorders nor chemical doping. Thus, our epitaxial approach can pave a novel pathway to providing precise interpretation of oxygen reduction reactions and to developing oxide-based energy materials.

cond-mat.mtrl-sci↗

arXiv2013

Ground state and Spin-Wave dynamics in Brownmillerite SrCoO2.5, A combined Hybrid Functional and LSDAU study

We theoretically investigate the ground state magnetic properties of the brownmillerite phase of SrCoO2.5. Strong correlations within Co d electrons are treated within the local spin density approximations of Density Functional theory (DFT) with Hubbard U corrections (LSDAU) and results are compared with the Heyd Scuzeria Ernzerhof (HSE) functional. The parameters computed with a U value of 7.5 eV are found to match closely to those computed within the HSE functional. A G type antiferromagnetic structure is found to be the most stable one, consistent with experimental observation. By mapping the total energies of different magnetic configurations onto a Heisenberg Hamiltonian we compute the magnetic exchange interaction parameters, J, between the nearest neighbor Co atoms. The J s obtained are then used to compute the spin wave frequencies and inelastic neutron scattering intensities. Among four spin wave branches, the lowest energy mode was found to have the largest scattering intensity at the magnetic zone center, while the other modes becomes dominant at different momenta. These predictions can be tested by experimentally.

cond-mat.mtrl-sci↗

arXiv2013

Reversible redox reactions in an epitaxially stabilized SrCoOx oxygen sponge

Fast, reversible redox reactions in solids at low temperatures without thermomechanical degradation are a promising strategy for enhancing the overall performance and lifetime of many energy materials and devices. However, the robust nature of the cation's oxidation state and the high thermodynamic barrier have hindered the realization of fast catalysis and bulk diffusion at low temperatures. Here, we report a significant lowering of the redox temperature by epitaxial stabilization of strontium cobaltites (SrCoOx) grown directly as one of two distinct crystalline phases, either the perovskite SrCoO3-δ or the brownmillerite SrCoO2.5. Importantly, these two phases can be reversibly switched at a remarkably reduced temperature (200~300 °C) in a considerably short time (< 1 min) without destroying the parent framework. The fast, low temperature redox activity in SrCoO3-δ is attributed to a small Gibbs free energy difference between two topotatic phases. Our findings thus provide useful information for developing highly sensitive electrochemical sensors and low temperature cathode materials.

cond-mat.mtrl-sci↗

arXiv2013

Reversal of the lattice structure in SrCoOx epitaxial thin films studied by real-time optical spectroscopy and first-principles calculations

Using real-time spectroscopic ellipsometry, we directly observed a reversible lattice and electronic structure evolution in SrCoOx (x = 2.5 - 3) epitaxial thin films. Drastically different electronic ground states, which are extremely susceptible to the oxygen content x, are found in the two topotactic phases, i.e. the brownmillerite SrCoO2.5 and the perovskite SrCoO3. First principles calculations confirmed substantial differences in the electronic structure, including a metal-insulator transition, which originates from the modification in the Co valence states and crystallographic structures. More interestingly, the two phases can be reversibly controlled by changing the ambient pressure at greatly reduced temperatures. Our finding provides an important pathway to understanding the novel oxygen-content-dependent phase transition uniquely found in multivalent transition metal oxides.

cond-mat.str-el↗

arXiv2013

Topotactic phase transformation of the brownmillerite SrCoO2.5 to the perovskite SrCoO3-δ

Oxygen stoichiometry is one of the most important elements in determining the physical properties of transition metal oxides (TMOs). A small fractional change in the oxygen content, resulting in the variation of valence state of the transition metal, can drastically modify the materials functionalities. In particular, TMOs with mixed valences have attracted attention for many energy applications. Previous studies also showed that the ability to control the number of d-band electron populations and detailed spin configurations is critical for improved catalytic performance of TMOs. In this context, SrCoO$_{x}$ (2.5 < x < 3.0) is an ideal class of materials due to the existence of two structurally distinct topotatic phases, i.e. the brownmillerite SrCoO$_{2.5}$(BM-SCO) and the perovskite SrCoO$_{3}$. Especially, BM-SCO has atomically-ordered one-dimensional vacancy channels, which can accommodate additional oxygen. Moreover, SrCoO$_{x}$ exhibits a wide spectrum of physical properties depending on the oxygen stoichiometry. Since SrCoOx has only a single knob to control the Co valence state without cation doping, it is an attractive material for studying the valence state dependent physical properties. However, so far, the growth of high quality single crystalline materials has not been much studied due to difficulty in controlling the right oxidation state. In this work, we report on the epitaxial growth of BM-SCO single crystalline films on SrTiO3 by pulsed laser epitaxy. In order to examine the topotactic phase transformation to the perovskite SrCoO$_{3-δ}$, some of samples were subsequently in-situ annealed at various oxygen pressure P(O$_{2}$). We found that post-annealing in high P(O$_{2}$) (> several hundreds of Torr) could fill some of oxygen vacancies accompanying systematic evolution in electronic, magnetic, and thermoelectric properties.

cond-mat.mtrl-sci↗

arXiv2013

Room-temperature multiferroic hexagonal LuFeO$_3$ films

The crystal and magnetic structures of single-crystalline hexagonal LuFeO$_3$ films have been studied using x-ray, electron and neutron diffraction methods. The polar structure of these films are found to persist up to 1050 K; and the switchability of the polar behavior is observed at room temperature, indicating ferroelectricity. An antiferromagnetic order was shown to occur below 440 K, followed by a spin reorientation resulting in a weak ferromagnetic order below 130 K. This observation of coexisting multiple ferroic orders demonstrates that hexagonal LuFeO$_3$ films are room-temperature multiferroics.

cond-mat.mtrl-sci↗

arXiv2012

Atomic layer engineering of perovskite oxides for chemically sharp heterointerfaces

Advances in synthesis techniques and materials understanding have given rise to oxide heterostructures with intriguing physical phenomena that cannot be found in their constituents. In these structures, precise control of interface quality, including oxygen stoichiometry, is critical for unambiguous tailoring of the interfacial properties, with deposition of the first monolayer being the most important step in shaping a well-defined functional interface. Here, we studied interface formation and strain evolution during the initial growth of LaAlO3 on SrTiO3 by pulsed laser deposition, in search of a means for controlling the atomic-sharpness of the interfaces. Our experimental results show that growth of LaAlO3 at a high oxygen pressure dramatically enhances interface abruptness. As a consequence, the critical thickness for strain relaxation was increased, facilitating coherent epitaxy of perovskite oxides. This provides a clear understanding of the role of oxygen pressure during the interface formation, and enables the synthesis of oxide heterostructures with chemically-sharper interfaces.

cond-mat.mtrl-sci↗

arXiv2012

Fractionally delta-doped oxide superlattices for higher carrier mobilities

A 2D electron gas system in an oxide heterostructure serves as an important playground for novel phenomena. Here, we show that, by using fractional delta-doping to control the interface's composition in LaxSr1-xTiO3/SrTiO3 artificial oxide superlattices, the filling-controlled 2D insulator-metal transition can be realized. The atomic-scale control of d-electron band filling, which in turn contributes to the tuning of effective mass and density of the charge carriers, is found to be a fascinating route to substantially enhanced carrier mobilities.

cond-mat.str-el↗

arXiv2012

Strain-Induced Spin States in Atomically Ordered Cobaltites

Epitaxial strain imposed in complex oxide thin films by heteroepitaxy is recognized as a powerful tool for identifying new properties and exploring the vast potential of materials performance. A particular example is LaCoO3, a zero spin, nonmagnetic material in the bulk, whose strong ferromagnetism in a thin film remains enigmatic despite a decade of intense research. Here, we use scanning transmission electron microscopy complemented by X-ray and optical spectroscopy to study LaCoO3 epitaxial thin films under different strain states. We observed an unconventional strain relaxation behavior resulting in stripe-like, lattice modulated patterns, which did not involve uncontrolled misfit dislocations or other defects. The modulation entails the formation of ferromagnetically ordered sheets comprising intermediate or high spin Co3+, thus offering an unambiguous description for the exotic magnetism found in epitaxially strained LaCoO3 films. This observation provides a novel route to tailoring the electronic and magnetic properties of functional oxide heterostructures.

cond-mat.mtrl-sci↗