arXiv subjects

Holger Thierschmann

Publications and source records attributed to Holger Thierschmann.

13 recordsLinked to original sources

arXiv2021

Open-cavity in closed-cycle cryostat as a quantum optics platform

The introduction of an optical resonator can enable efficient and precise interaction between a photon and a solid-state emitter. It facilitates the study of strong light-matter interaction, polaritonic physics and presents a powerful interface for quantum communication and computing. A pivotal aspect in the progress of light-matter interaction with solid-state systems is the challenge of combining the requirements of cryogenic temperature and high mechanical stability against vibrations while maintaining sufficient degrees of freedom for in-situ tunability. Here, we present a fiber-based open Fabry-Pérot cavity in a closed-cycle cryostat exhibiting ultra-high mechanical stability while providing wide-range tunability in all three spatial directions. We characterize the setup and demonstrate the operation with the root-mean-square cavity length fluctuation of less than $90$ pm at temperature of $6.5$ K and integration bandwidth of $100$ kHz. Finally, we benchmark the cavity performance by demonstrating the strong-coupling formation of exciton-polaritons in monolayer WSe$_2$ with a cooperativity of $1.6$. This set of results manifests the open-cavity in a closed-cycle cryostat as a versatile and powerful platform for low-temperature cavity QED experiments.

quant-ph↗

arXiv2021

Free-space sub-terahertz field-polarization controlled by waveguide-mode-selection

We study experimentally the free-space electro-magnetic field emitted from a multimode rectangular waveguide equipped with a diagonal-horn antenna. Using the frequency range of 215-580 GHz, a photo-mixer is used to launch a free-space circularly-polarized electro-magnetic field, exciting multiple modes at the input of the rectangular waveguide via an input diagonal-horn antenna. A second photo-mixer is used, together with a silicon mirror Fresnel scatterer, to act as a polarization-sensitive coherent detector to characterize the emitted field. We find that the radiated field, excited by the fundamental waveguide mode, is characterized by a linear polarization. In addition, we find that the polarization of the radiated field rotates by 45 degree if selectively exciting higher-order modes in the waveguide. Despite the higher-order modes, the radiated field appears to maintain a predominant Gaussian beam character, since an unidirectional coupling to a detector was possible, whereas the unidirectionality is independent of the frequency. We discuss a possible application of this finding.

quant-ph↗

arXiv2020

How to measure the entropy of a mesoscopic system via thermoelectric transport

Entropy is a fundamental thermodynamic quantity indicative of the accessible degrees of freedom in a system. While it has been suggested that the entropy of a mesoscopic system can yield nontrivial information on emergence of exotic states, its measurement in such small electron-number system is a daunting task. Here we propose a method to extract the entropy of a Coulomb-blockaded mesoscopic system from transport measurements. We prove analytically and demonstrate numerically the applicability of the method to such a mesoscopic system of arbitrary spectrum and degeneracies. We then apply our procedure to measurements of thermoelectric response of a single quantum dot, and demonstrate how it can be used to deduce the entropy change across Coulomb-blockade valleys, resolving, along the way, a long-standing puzzle of the experimentally observed finite thermoelectric response at the apparent particle-hole symmetric point.

cond-mat.mes-hall↗

arXiv2019

Analysis of a single-mode waveguide at sub-terahertz frequencies as a communication channel

We study experimentally the transmission of an electro-magnetic waveguide in the frequency range from 160 to 300 GHz. Photo-mixing is used to excite and detect the fundamental TE10 mode in a rectangular waveguide with two orders-of-magnitude lower impedance. The large impedance mismatch leads to a strong frequency dependence of the transmission, which we measure with a high-dynamic range of up to 80 dB, and with high frequency-resolution. The modified transmission function is directly related to the information rate of the waveguide, which we estimate to be about 1 bit per photon. We suggest that the results are applicable to a Josephson junction employed as a single-photon source and coupled to a superconducting waveguide to achieve a simple on-demand narrow-bandwidth free-space number-state channel.

physics.optics↗

arXiv2019

Local electrodynamics of a disordered conductor model system measured with a microwave impedance microscope

We study the electrodynamic impedance of percolating conductors with a pre-defined network topology using a scanning microwave impedance microscope (sMIM) at GHz frequencies. For a given percolation number we observe strong spatial variations across a sample which correlate with the connected regions (clusters) in the network when the resistivity is low such as in Aluminum. For the more resistive material NbTiN the impedance becomes dominated by the local structure of the percolating network (connectivity). The results can qualitatively be understood and reproduced with a network current spreading model based on the pseudo-inverse Laplacian of the underlying network graph.

cond-mat.mtrl-sci↗

arXiv2019

Shielded cantilever with on-chip interferometer circuit for THz scanning probe impedance microscopy

We have realized a microstrip based THz near field cantilever which enables quantitative measurements of the impedance of the probe tip at THz frequencies (0.3 THz). A key feature is the on-chip balanced hybrid coupler which serves as an interferometer for passive signal cancellation to increase the readout circuit sensitivity despite extreme impedance mismatch at the tip. We observe distinct changes in the reflection coefficient of the tip when brought into contact with different dielectric (Si, SrTiO3) and metallic samples (Au). By comparing to finite element simulations we determine the sensitivity of our THz probe to be well below 0.25 fF. The cantilever further allows for topography imaging in a conventional atomic force microscope mode. Our THz cantilever removes several critical technology challenges and thus enables a shielded cantilever based THz near field microscope.

physics.app-ph↗

arXiv2017

Single-electron thermal devices coupled to a mesoscopic gate

We theoretically investigate the propagation of heat currents in a three-terminal quantum dot engine. Electron-electron interactions introduce state-dependent processes which can be resolved by energy-dependent tunneling rates. We identify the relevant transitions which define the operation of the system as a thermal transistor or a thermal diode. In the former case, thermal-induced charge fluctuations in the gate dot modify the thermal currents in the conductor with suppressed heat injection, resulting in huge amplification factors and the possible gating with arbitrarily low energy cost. In the latter case, enhanced correlations of the state-selective tunneling transitions redistribute heat flows giving high rectification coefficients and the unexpected cooling of one conductor terminal by heating the other one. We propose quantum dot arrays as a possible way to achieve the extreme tunneling asymmetries required for the different operations.

cond-mat.mes-hall↗

arXiv2017

Superconducting quantum point contact with split gates in the two dimensional LaAlO3/SrTiO3 superfluid

One of the hallmark experiments of quantum transport is the observation of the quantized resistance in a point contact formed with split gates in GaAs/AlGaAs heterostructures. Being carried out on a single material, they represent in an ideal manner equilibrium reservoirs which are connected only through a few electron mode channel with certain transmission coefficients. It has been a long standing goal to achieve similar experimental conditions also in superconductors, only reached in atomic scale mechanically tunable break junctions of conventional superconducting metals, but here the Fermi wavelength is so short that it leads to a mixing of quantum transport with atomic orbital physics. Here we demonstrate for the first time the formation of a superconducting quantum point contact (SQPC) with split gate technology in a superconductor, utilizing the unique gate tunability of the two dimensional superfluid at the LaAlO3/SrTiO3 (LAO/STO) interface. When the constriction is tuned through the action of metallic split gates we identify three regimes of transport: (i) SQPC for which the supercurrent is carried only by a few quantum transport channels. (ii) Superconducting island strongly coupled to the equilibrium reservoirs. (iii) Charge island with a discrete spectrum weakly coupled to the reservoirs. Our experiments demonstrate the feasibility of a new generation of mesoscopic all-superconductor quantum transport devices.

cond-mat.mes-hall↗

arXiv2017

All-thermal transistor based on stochastic switching

Fluctuations are strong in mesoscopic systems and have to be taken into account for the description of transport. We show that they can even be used as a resource for the operation of a system as a device. We use the physics of single-electron tunneling to propose a bipartite device working as a thermal transistor. Charge and heat currents in a two terminal conductor can be gated by thermal fluctuations from a third terminal to which it is capacitively coupled. The gate system can act as a switch that injects neither charge nor energy into the conductor hence achieving huge amplification factors. Non-thermal properties of the tunneling electrons can be exploited to operate the device with no energy consumption.

cond-mat.mes-hall↗

arXiv2016

Thermoelectrics with Coulomb coupled quantum dots

In this article we review the thermoelectric properties of three terminal devices with Coulomb coupled quantum dots (QDs) as observed in recent experiments [1,2]. The system we consider consists of two Coulomb-blockade QDs one of which can exchange electrons with only a single reservoir (heat reservoir) while the other dot is tunnel coupled to two reservoirs at a lower temperature (conductor). The heat reservoir and the conductor interact only via the Coulomb-coupling of the quantum dots. It has been found that two regimes have to be considered. In the first one heat flow between the two systems is small. In this regime thermally driven occupation fluctuations of the hot QD modify the transport properties of the conductor system. This leads to an effect called thermal gating. Experiment have shown how this can be used to control charge flow in the conductor by means of temperature in a remote reservoir. We further substantiate the observations with model calculations and implications for the realization of an all-thermal transistor are discussed. In the second regime, heat flow between the two systems is relevant. Here the system works as a nano scale heat engine, as proposed recently [3]. We review the conceptual idea, its experimental realization and the novel features arising in this new kind of thermoelectric device such as decoupling of heat and charge flow.

cond-mat.mes-hall↗

arXiv2016

Three-Terminal Energy Harvester with Coupled Quantum Dots

Rectification of thermal fluctuations in mesoscopic conductors is the key idea of today's attempts to build nanoscale thermoelectric energy harvesters in order to convert heat into a useful electric power. So far, most concepts make use of the Seebeck effect in a two-terminal geometry where heat and charge are both carried by the same particles. Here, we experimentally demonstrate the working principle of a new kind of energy harvester, proposed recently using two capacitively coupled quantum dots. We show that due to its novel three-terminal design which spatially separates the heat reservoir from the conductor circuit, the directions of charge and heat flow become decoupled in our device. This enables us to manipulate the direction of the generated charge current by means of external gate voltages while leaving the direction of heat flow unaffected. Our results pave the way for a new generation of multi-terminal, highly efficient nanoscale heat engines.

cond-mat.mes-hall↗

arXiv2016

Spatial conductivity mapping of unprotected and capped black phosphorus using microwave microscopy

Thin layers of black phosphorus present an ideal combination of a 2D material with a tunable direct bandgap and high carrier mobility. However the material suffers from degradation in ambient conditions due to an oxidation reaction which involves water, oxygen and light. We have measured the spatial profile of the conductivity on flakes of black phosphorus as a function of time using scanning microwave impedance microscopy. A microwave excitation (3 GHz) allows to image a conducting sample even when covered with a dielectric layer. We observe that on bare black phosphorus, the conductivity changes drastically over the whole surface within a day. We demonstrate that the degradation process is slowed down considerably by covering the material with a 10 nm layer of hafnium oxide. It is stable for more than a week, opening up a route towards stable black phosphorus devices in which the high dielectric constant of hafnium oxide can be exploited. Covering black phosphorus with a 15 nm boron nitride flake changes the degradation process qualitatively, it is dominated by the edges of the flake indicating a diffusive process and happens on the scale of days.

cond-mat.mtrl-sci↗

arXiv2015

Thermal Gating of Charge Currents with Coulomb Coupled Quantum Dots

We have observed thermal gating, i.e. electrostatic gating induced by hot electrons. The effect occurs in a device consisting of two capacitively coupled quantum dots. The double dot system is coupled to a hot electron reservoir on one side (QD1), whilst the conductance of the second dot (QD2) is monitored. When a bias across QD2 is applied we observe a current which is strongly dependent on the temperature of the heat reservoir. This current can be either enhanced or suppressed, depending on the relative energetic alignment of the QD levels. Thus, the system can be used to control a charge current by hot electrons.

cond-mat.mes-hall↗