arXiv subjects

Hong Ren

Publications and source records attributed to Hong Ren.

121 records · Page 7Linked to original sources

arXiv2020

Multicell MIMO Communications Relying on Intelligent Reflecting Surface

Intelligent reflecting surfaces (IRSs) constitute a disruptive wireless communication technique capable of creating a controllable propagation environment. In this paper, we propose to invoke an IRS at the cell boundary of multiple cells to assist the downlink transmission to cell-edge users, whilst mitigating the inter-cell interference, which is a crucial issue in multicell communication systems. We aim for maximizing the weighted sum rate (WSR) of all users through jointly optimizing the active precoding matrices at the base stations (BSs) and the phase shifts at the IRS subject to each BS's power constraint and unit modulus constraint. Both the BSs and the users are equipped with multiple antennas, which enhances the spectral efficiency by exploiting the spatial multiplexing gain. Due to the non-convexity of the problem, we first reformulate it into an equivalent one, which is solved by using the block coordinate descent (BCD) algorithm, where the precoding matrices and phase shifts are alternately optimized. The optimal precoding matrices can be obtained in closed form, when fixing the phase shifts. A pair of efficient algorithms are proposed for solving the phase shift optimization problem, namely the Majorization-Minimization (MM) Algorithm and the Complex Circle Manifold (CCM) Method. Both algorithms are guaranteed to converge to at least locally optimal solutions. We also extend the proposed algorithms to the more general multiple-IRS and network MIMO scenarios. Finally, our simulation results confirm the advantages of introducing IRSs in enhancing the cell-edge user performance.

eess.SP↗

arXiv2020

Resource Allocation for Intelligent Reflecting Surface Aided Wireless Powered Mobile Edge Computing in OFDM Systems

Wireless powered mobile edge computing (WP-MEC) has been recognized as a promising technique to provide both enhanced computational capability and sustainable energy supply to massive low-power wireless devices. However, its energy consumption becomes substantial, when the transmission link used for wireless energy transfer (WET) and for computation offloading is hostile. To mitigate this hindrance, we propose to employ the emerging technique of intelligent reflecting surface (IRS) in WP-MEC systems, which is capable of providing an additional link both for WET and for computation offloading. Specifically, we consider a multi-user scenario where both the WET and the computation offloading are based on orthogonal frequency-division multiplexing (OFDM) systems. Built on this model, an innovative framework is developed to minimize the energy consumption of the IRS-aided WP-MEC network, by optimizing the power allocation of the WET signals, the local computing frequencies of wireless devices, both the sub-band-device association and the power allocation used for computation offloading, as well as the IRS reflection coefficients. The major challenges of this optimization lie in the strong coupling between the settings of WET and of computing as well as the unit-modules constraint on IRS reflection coefficients. To tackle these issues, the technique of alternative optimization is invoked for decoupling the WET and computing designs, while two sets of locally optimal IRS reflection coefficients are provided for WET and for computation offloading separately relying on the successive convex approximation method. The numerical results demonstrate that our proposed scheme is capable of monumentally outperforming the conventional WP-MEC network without IRSs.

eess.SP↗

arXiv2020

Intelligent Reflecting Surface Aided MIMO Broadcasting for Simultaneous Wireless Information and Power Transfer

An intelligent reflecting surface (IRS) is invoked for enhancing the energy harvesting performance of a simultaneous wireless information and power transfer (SWIPT) aided system. Specifically, an IRS-assisted SWIPT system is considered, where a multi-antenna aided base station (BS) communicates with several multi-antenna assisted information receivers (IRs), while guaranteeing the energy harvesting requirement of the energy receivers (ERs). To maximize the weighted sum rate (WSR) of IRs, the transmit precoding (TPC) matrices of the BS and passive phase shift matrix of the IRS should be jointly optimized. To tackle this challenging optimization problem, we first adopt the classic block coordinate descent (BCD) algorithm for decoupling the original optimization problem into several subproblems and alternatively optimize the TPC matrices and the phase shift matrix. For each subproblem, we provide a low-complexity iterative algorithm, which is guaranteed to converge to the Karush-Kuhn-Tucker (KKT) point of each subproblem. The BCD algorithm is rigorously proved to converge to the KKT point of the original problem. We also conceive a feasibility checking method to study its feasibility. Our extensive simulation results confirm that employing IRSs in SWIPT beneficially enhances the system performance and the proposed BCD algorithm converges rapidly, which is appealing for practical applications.

eess.SP↗

arXiv2020

Resource Allocation for Secure URLLC in Mission-Critical IoT Scenario

Ultra-reliable low latency communication (URLLC) is one of three primary use cases in the fifth-generation (5G) networks, and its research is still in its infancy due to its stringent and conflicting requirements in terms of extremely high reliability and low latency. To reduce latency, the channel blocklength for packet transmission is finite, which incurs transmission rate degradation and higher decoding error probability. In this case, conventional resource allocation based on Shannon capacity achieved with infinite blocklength codes is not optimal. Security is another critical issue in mission-critical internet of things (IoT) communications, and physical-layer security is a promising technique that can ensure the confidentiality for wireless communications as no additional channel uses are needed for the key exchange as in the conventional upper-layer cryptography method. This paper is the first work to study the resource allocation for a secure mission-critical IoT communication system with URLLC. Specifically, we adopt the security capacity formula under finite blocklength and consider two optimization problems: weighted throughput maximization problem and total transmit power minimization problem. Each optimization problem is non-convex and challenging to solve, and we develop efficient methods to solve each optimization problem. Simulation results confirm the fast convergence speed of our proposed algorithm and demonstrate the performance advantages over the existing benchmark algorithms.

eess.SP↗

arXiv2019

Joint Pilot and Payload Power Allocation for Massive-MIMO-enabled URLLC IIoT Networks

The Fourth Industrial Revolution (Industrial 4.0) is coming, and this revolution will fundamentally enhance the way the factories manufacture products. The conventional wired lines connecting central controller to robots or actuators will be replaced by wireless communication networks due to its low cost of maintenance and high deployment flexibility. However, some critical industrial applications require ultra-high reliability and low latency communication (URLLC). In this paper, we advocate the adoption of massive multiple-input multiple output (MIMO) to support the wireless transmission for industrial applications as it can provide deterministic communications similar as wired lines thanks to its channel hardening effects. To reduce the latency, the channel blocklength for packet transmission is finite, and suffers from transmission rate degradation and decoding error probability. Thus, conventional resource allocation for massive MIMO transmission based on Shannon capacity assuming the infinite channel blocklength is no longer optimal. We first derive the closed-form expression of lower bound (LB) of achievable uplink data rate for massive MIMO system with imperfect channel state information (CSI) for both maximum-ratio combining (MRC) and zero-forcing (ZF) receivers. Then, we propose novel low-complexity algorithms to solve the achievable data rate maximization problems by jointly optimizing the pilot and payload transmission power for both MRC and ZF. Simulation results confirm the rapid convergence speed and performance advantage over the existing benchmark algorithms.

eess.SP↗

arXiv2019

Joint Power and Blocklength Optimization for URLLC in a Factory Automation Scenario

In URLLC, short packet transmission is adopted to reduce latency, such that conventional Shannon's capacity formula is no longer applicable, and the achievable data rate in finite blocklength becomes a complex expression with respect to the decoding error probability and the blocklength. To provide URLLC service in a factory automation scenario, we consider that the central controller transmits different packets to a robot and an actuator, where the actuator is located far from the controller, and the robot can move between the controller and the actuator. In this scenario, we consider four fundamental downlink transmission schemes, including orthogonal multiple access (OMA), non-orthogonal multiple access (NOMA), relay-assisted, and cooperative NOMA (C-NOMA) schemes. For all these transmission schemes, we aim for jointly optimizing the blocklength and power allocation to minimize the decoding error probability of the actuator subject to the reliability requirement of the robot, the total energy constraints, as well as the latency constraints. We further develop low-complexity algorithms to address the optimization problems for each transmission scheme. { For the general case with more than two devices, we also develop a low-complexity efficient algorithm for the OMA scheme.} Our results show that the relay-assisted transmission significantly outperforms the OMA scheme, while NOMA scheme performs well when the blocklength is very limited. We further show that the relay-assisted transmission has superior performance over the C-NOMA scheme due to larger feasible region of the former scheme.

eess.SP↗

arXiv2019

Achievable Data Rate for URLLC-Enabled UAV Systems with 3-D Channel Model

In this paper, we investigate the average achievable data rate (AADR) of the control information delivery from the ground control station (GCS) to unmanned-aerial-vehicle (UAV) under a 3-D channel, which requires ultra-reliable and low-latency communications (URLLC) to avoid collision. The value of AADR can give insights on the packet size design. Achievable data rate under short channel blocklength is adopted to characterize the system performance. The UAV is assumed to be uniformly distributed within a restricted space. We first adopt the Gaussian-Chebyshev quadrature (GCQ) to approximate the exact AADR. The tight lower bound of AADR is derived in a closed form. Numerical results verify the correctness and tightness of our derived results.

eess.SP↗

arXiv2019

Joint Blocklength and Location Optimization for URLLC-enabled UAV Relay Systems

This letter considers the unmanned aerial vehicle (UAV)-enabled relay system to deliver command information under ultra-reliable and low-latency communication (URLLC) requirements. We aim to jointly optimize the blocklength allocation and the UAV's location to minimize the decoding error probability subject to the latency requirement. The achievable data rate under finite blocklength regime is adopted. A novel perturbation-based iterative algorithm is proposed to solve this problem. Simulation results show that the proposed algorithm can achieve the same performance as the exhaustive search method, and significantly outperforms the existing algorithms.

eess.SP↗

arXiv2018

Power-and Rate-Adaptation Improves the Effective Capacity of C-RAN for Nakagami-$m$ Fading Channels

We propose a power-and rate-adaptation scheme for cloud radio access networks (C-RANs), where each radio remote head (RRH) is connected to the baseband unit (BBU) pool through optical links. The RRHs jointly support the users by efficiently exploiting the enhanced spatial degrees of freedom. Our proposed scheme aims for maximizing the effective capacity (EC) of the user subject to both per-RRH average-and peak-power constraints, where the EC is defined as the maximum arrival rate that can be supported by the C-RAN under the statistical delay requirement. We first transform the EC maximization problem into an equivalent convex optimization problem. By using the Lagrange dual decomposition method and solving the Karush-Kuhn-Tucker (KKT) equations, the optimal transmission power of each RRH can be obtained in closed-form. Furthermore, an online tracking method is provided for approximating the average power of each RRH for the sake of updating the Lagrange dual variables. For the special case of two RRHs, the expression of the average power of each RRH can be calculated in explicit form. Hence, the Lagrange dual variables can be computed in advance in this special case. Furthermore, we derive the power allocation for two important extreme cases: 1) no delay constraint; 2) extremely stringent delay-requirements. Our simulation results show that the proposed scheme significantly outperforms the conventional algorithm without considering the delay requirements. Furthermore, when appropriately tuning the value of the delay exponent, our proposed algorithm is capable of guaranteeing a delay outage probability below $10^{-9}$ when the maximum tolerable delay is 1 ms. This is suitable for the future ultra-reliable low latency communications (URLLC).

cs.IT↗

arXiv2018

Robust Beamforming Design for Ultra-dense User-Centric C-RAN in the Face of Realistic Pilot Contamination and Limited Feedback

The ultra-dense cloud radio access network (UD-CRAN), in which remote radio heads (RRHs) are densely deployed in the network, is considered. To reduce the channel estimation overhead, we focus on the design of robust transmit beamforming for user-centric frequency division duplex (FDD) UD-CRANs, where only limited channel state information (CSI) is available. Specifically, we conceive a complete procedure for acquiring the CSI that includes two key steps: channel estimation and channel quantization. The phase ambiguity (PA) is also quantized for coherent cooperative transmission. Based on the imperfect CSI, we aim for optimizing the beamforming vectors in order to minimize the total transmit power subject to users' rate requirements and fronthaul capacity constraints. We derive the closed-form expression of the achievable data rate by exploiting the statistical properties of multiple uncertain terms. Then, we propose a low-complexity iterative algorithm for solving this problem based on the successive convex approximation technique. In each iteration, the Lagrange dual decomposition method is employed for obtaining the optimal beamforming vector. Furthermore, a pair of low-complexity user selection algorithms are provided to guarantee the feasibility of the problem. Simulation results confirm the accuracy of our robust algorithm in terms of meeting the rate requirements. Finally, our simulation results verify that using a single bit for quantizing the PA is capable of achieving good performance.

eess.SP↗

arXiv2016

Energy Efficient Transmission for Multicast Services in MISO Distributed Antenna Systems

This paper aims to solve the energy efficiency (EE) maximization problem for multicast services in a multiple-input single-output (MISO) distributed antenna system (DAS). A novel iterative algorithm is proposed, which consists of solving two subproblems iteratively: the power allocation problem and the beam direction updating problem. The former subproblem can be equivalently transformed into a one-dimension quasi-concave problem that is solved by the golden search method. The latter problem can be efficiently solved by the existing method. Simulation results show that the proposed algorithm achieves significant EE performance gains over the existing rate maximization method. In addition, when the backhaul power consumption is low, the EE performance of the DAS is better than that of the centralized antenna system (CAS).

cs.IT↗

arXiv2015

Energy Efficiency Optimization for MIMO Distributed Antenna Systems

In this paper, we propose a transmit covariance optimization method to maximize the energy efficiency (EE) for a single-user distributed antenna system, where both the remote access units (RAUs) and the user are equipped with multiple antennas. Unlike previous related works, both the rate requirement and RAU selection are taken into consideration. Here, the total circuit power consumption is related to the number of active RAUs. Given this setup, we first propose an optimal transmit covariance optimization method to solve the EE optimization problem under a fixed set of active RAUs. More specifically, we split this problem into three subproblems, i.e., the rate maximization problem, the EE maximization problem without rate constraint, and the power minimization problem, and each subproblem can be efficiently solved. Then, a novel distance-based RAU selection method is proposed to determine the optimal set of active RAUs. Simulation results show that the performance of the proposed RAU selection is almost identical to the optimal exhaustive search method with significantly reduced computational complexity, and the performance of the proposed algorithm significantly outperforms the existing EE optimization methods.

cs.IT↗

arXiv2015

Totally Distributed Energy-Efficient Transmission in MIMO Interference Channels

In this paper, we consider the problem of maximizing the energy efficiency (EE) for multi-input multi-output (MIMO) interference channels, subject to the per-link power constraint. To avoid extensive information exchange among all links, the optimization problem is formulated as a noncooperative game, where each link maximizes its own EE. We show that this game always admits a Nash equilibrium (NE) and the sufficient condition for the uniqueness of the NE is derived for the case of arbitrary channel matrices, which can be checked in practice. To reach the NE of this game, we develop a totally distributed EE algorithm, in which each link updates its own transmit covariance matrix in a completely distributed and asynchronous way: Some players may update their solutions more frequently than others or even use the outdated interference information. The sufficient conditions that guarantee the global convergence of the proposed algorithm to the NE of the game have been given as well. We also study the impact of the circuit power consumption on the sum-EE performance of the proposed algorithm in the case when the links are separated sufficiently far away. Moreover, the tradeoff between the sum-EE and the sum-spectral efficiency (SE) is investigated with the proposed algorithm under two special cases: 1) low transmit power constraint regime; 2) high transmit power constraint regime. Finally, extensive simulations are conducted to evaluate the impact of various system parameters on the system performance.

cs.IT↗