arXiv subjects

Honghao Wang

Publications and source records attributed to Honghao Wang.

14 recordsLinked to original sources

arXiv2026

Emergent Electronic Bond-Order Wave in a Quasi-One-Dimensional Chain

Collective order is notoriously difficult to stabilize in one dimension, where strong fluctuations suppress symmetry-breaking states. Here we report the emergence of an electronic bond-order wave (BOW) in the quasi-one-dimensional (1D) material Ba9Rh8O24, in which structural bonds become active electronic degrees of freedom that overcome 1D fluctuations to establish long-range order. Single-crystal X-ray diffraction uncovers a striking inversion of inequivalent Rh-Rh bonds across a transition TA = 180 K, where short and long bonds interchange their identities rather than undergoing conventional Peierls dimerization. This bond inversion coincides with a heat-capacity anomaly and a profound reorganization of the dielectric response with strong suppression of dielectric loss upon cooling. The BOW exhibits strongly nonlinear, frequency-dependent I-V characteristics, clockwise hysteresis, and nonvolatile memristive switching. These findings uncover an unprecedented transformation from a dynamic bond liquid to a rigid yet electrically reconfigurable BOW, establishing bond-centered electronic order as a new organizing principle for 1D quantum matter.

cond-mat.str-el↗

arXiv2026

Movable Subarray-Aided ISAC in Hybrid Near-Far Field Channels

This letter investigates an integrated sensing and communication (ISAC) system aided by movable subarrays (MSAs) using a hybrid near-far field channel model. The sensing target and communication users are assumed to lie in the near field of the overall MSA aperture but in the far-field region of each subarray. Accordingly, a hybrid near-far field channel model is established, and the equivalent Fisher information matrix and Cram\'er-Rao bound (CRB) for joint range, elevation, and azimuth estimation are derived. The transmit beamforming matrix and subarray positions are jointly optimized to minimize the trace CRB subject to minimum communication signal-to-interference-plus-noise ratio (SINR), maximum transmit power and subarray movement constraints. An alternating optimization algorithm is developed combining iterative rank-one-penalized semidefinite relaxation with projected finite-difference block descent and backtracking. Numerical results show that the hybrid-field model closely matches the spherical-wave model, while MSAs substantially reduce the CRB.

cs.IT↗

arXiv2026

Ultra-Low-Cost Hybrid Beamforming: A New Static-Connection Architecture with Sparse Phase-Shifter Sharing

Hybrid beamforming is a promising solution for high-frequency multi-antenna wireless systems, but its implementation is constrained by the cost and complexity of analog phase-shifter (PS) networks. Although sub-connected architectures simplify the analog network, their conventional realization still requires a dedicated PS for each antenna, causing considerable layout area, wiring, calibration, and control overheads. To address this issue, this paper proposes a novel static-connection architecture with sparse PSs for ultra-low-cost sub-connected hybrid beamforming, where antennas within each sub-array share a PS through an optimized fixed PS-to-antenna connection matrix. The proposed architecture preserves static connections while enabling dynamic beam control via adaptive PS phase-shift adjustments and digital precoding. For the single-radio-frequency (RF)-chain scenario, the sparse-PS connection design is transformed into an antenna-grouping problem, with analytically characterized structural properties and an efficient algorithm. For the multi-RF-chain scenario, we develop a quality-of-service (QoS)-majorization-minimization (MM) algorithm to handle the mixed discrete-continuous optimization problem. Numerical results demonstrate that the proposed architecture reduces the PS count while preserving most beamforming capability of the traditional full-PS sub-connected architecture. In particular, the proposed design achieves PS-count reductions of 37.5% and 62.5% in single-RF-chain and multi-RF-chain systems, respectively, while avoiding deep-null and grating-lobe degradations associated with deterministic connection schemes. These results provide engineering insights into static sparse-PS sharing: the key to hardware-efficient hybrid beamforming is not merely reducing the PS count, but also preserving essential analog-domain degrees of freedom through optimized PS connection topologies.

cs.IT↗

arXiv2026

THz RHS Transceiver for Low-Latency Multi-User VR Transmission with MEC

This paper investigates a Terahertz (THz)-enabled mobile edge computing (MEC)-assisted virtual reality (VR) system using reconfigurable holographic surfaces (RHS) as transceiver for multi-user beamforming and holographic-pattern division multiple access (HDMA). We develop an end-to-end model for the 3D field-of-view (FoV) generation pipeline and optimize content prefetching, rendering offloading under memory and power constraints, and beamforming accommodating user movement by adjusting holographic pattern weights for beamshaping and feeds power allocation for excitation amplitude adjustment. For homogeneous FoVs, we derive closed-form policies for prefetching 2D or 3D FoVs or direct transmission of 3D FoVs. For heterogeneous FoVs, we exploit the timescale separation between prefetching/rendering and fast RHS beamforming, decomposing the optimization into a rendering-prefetching combinatorial optimization problem and a short-timescale beamforming convex optimization problem. Simulations show significant latency reductions under tight resource constraints.

cs.IT↗

arXiv2026

PACC: Protocol-Aware Cross-Layer Compression for Compact Network Traffic Representation

Network traffic classification is a core primitive for network security and management, yet it is increasingly challenged by pervasive encryption and evolving protocols. A central bottleneck is representation: hand-crafted flow statistics are efficient but often too lossy, raw-bit encodings can be accurate but are costly, and recent pre-trained embeddings provide transfer but frequently flatten the protocol stack and entangle signals across layers. We observe that real traffic contains substantial redundancy both across network layers and within each layer; existing paradigms do not explicitly identify and remove this redundancy, leading to wasted capacity, shortcut learning, and degraded generalization. To address this, we propose PACC, a redundancy-aware, layer-aware representation framework. PACC treats the protocol stack as multi-view inputs and learns compact layer-wise projections that remain faithful to each layer while explicitly factorizing representations into shared (cross-layer) and private (layer-specific) components. We operationalize these goals with a joint objective that preserves layer-specific information via reconstruction, captures shared structure via contrastive mutual-information learning, and maximizes task-relevant information via supervised losses, yielding compact latents suitable for efficient inference. Across datasets covering encrypted application classification, IoT device identification, and intrusion detection, PACC consistently outperforms feature-engineered and raw-bit baselines. On encrypted subsets, it achieves up to a 12.9% accuracy improvement over nPrint. PACC matches or surpasses strong foundation-model baselines. At the same time, it improves end-to-end efficiency by up to 3.16x.

cs.NI↗

arXiv2026

Cell-Free MIMO with Rotatable Antennas: When Macro-Diversity Meets Antenna Directivity

Cell-free networks leverage distributed access points (APs) to achieve macro-diversity, yet their performance is often constrained by large disparities in channel quality arising from user geometry and blockages. To address this, rotatable antennas (RAs) add a lightweight hardware degree of freedom by steering the antenna boresight toward dominant propagation directions to strengthen unfavorable links, thereby enabling the network to better exploit macro-diversity for higher and more uniform performance. This paper investigates an RA-enabled cell-free downlink network and formulates a max-min rate problem that jointly optimizes transmit beamforming and antenna orientations. To tackle this challenging problem, we develop an alternating-optimization-based algorithm that iteratively updates the beamformers via a second-order cone program (SOCP) and optimizes the antenna orientations using successive convex approximation. To reduce complexity, we further propose an efficient two-stage scheme that first designs orientations by maximizing a proportional-fair log-utility using manifold-aware Frank-Wolfe updates, and then computes the beamformers using an SOCP-based design. Simulation results demonstrate that the proposed orientation-aware designs achieve a substantially higher worst-user rate than conventional beamforming-only benchmarks. Furthermore, larger antenna directivity enhances fairness with proper orientation but can degrade the worst-user performance otherwise.

eess.SP↗

arXiv2026

Wireless Communication with Cross-Linked Rotatable Antenna Array: Architecture Design and Rotation Optimization

Rotatable antenna (RA) technology can harness additional spatial degrees of freedom by enabling the dynamic three-dimensional orientation control of each antenna. Unfortunately, the hardware cost and control complexity of traditional RA systems is proportional to the number of RAs. To address the issue, we consider a cross-linked (CL) RA structure, which enables the coordinated rotation of multiple antennas, thereby offering a cost-effective solution. To evaluate the performance of the CL-RA array, we investigate a CL-RA-aided uplink system. Specifically, we first establish system models for both antenna element-level and antenna panel-level rotation. Then, we formulate a sum rate maximization problem by jointly optimizing the receive beamforming at the base station and the rotation angles. For the antenna element-level rotation, we derive the optimal solution of the CL-RA array under the single-user case. Subsequently, for two rotation schemes, we propose an alternating optimization algorithm to solve the formulated problem in the multi-user case, where the receive beamforming and the antenna rotation angles are obtained by applying the minimum mean square error method and feasible direction method, respectively. In addition, considering the hardware limitations, we apply the genetic algorithm to address the discrete rotation angles selection problem. Simulation results show that by carefully designing the row-column partition scheme, the performance of the CL-RA architecture is quite close to that of the flexible antenna orientation scheme. Moreover, the CL antenna element-level scheme surpasses the CL antenna panel-level scheme by 25% and delivers a 128% performance improvement over conventional fixed-direction antennas.

cs.IT↗

arXiv2025

Low-Altitude ISAC with Rotatable Active and Passive Arrays

This paper investigates a low-altitude integrated sensing and communication (ISAC) system that leverages cooperative rotatable active and passive arrays. We consider a downlink scenario where a base station (BS) with an active rotatable array serves multiple communication users and senses low-altitude targets, assisted by a rotatable reconfigurable intelligent surface (RIS). A rotation-aware geometry-based multipath model is developed to capture the impact of three-dimensional (3D) array orientations on both steering vectors and direction-dependent element gains. On this basis, we formulate a new optimization problem that maximizes the downlink sum rate subject to a transmit power budget, RIS unit-modulus constraints, mechanical rotation limits, and a sensing beampattern mean-squared-error (MSE) constraint. To address the resulting highly non-convex problem, we propose a penalty-based alternating-optimization (AO) framework that alternately updates the BS precoder, RIS phase shifts, and BS/RIS array rotation angles. The three blocks are efficiently handled via a convex optimization method based on quadratic-transform (QT) and majorization-minorization (MM), Riemannian conjugate gradient (RCG) on the unit-modulus manifold, and projected gradient descent (PGD) with Barzilai-Borwein step sizes, respectively. Numerical results in low-altitude geometries demonstrate that the proposed jointly rotatable BS-RIS architecture achieves significant sum-rate gains over fixed or partially rotatable baselines while guaranteeing sensing requirements, especially with directional antennas and in interference-limited regimes.

eess.SP↗

arXiv2025

Joint Beamforming and Position Optimization for IRS-Aided SWIPT with Movable Antennas

Simultaneous wireless information and power transfer (SWIPT) has been envisioned as a promising technology to support ubiquitous connectivity and reliable sustainability in Internet-of-Things (IoT) networks, which, however, generally suffers from severe attenuation caused by long distance propagation, leading to inefficient wireless power transfer (WPT) for energy harvesting receivers (EHRs). This paper proposes to introduce emerging intelligent reflecting surface (IRS) and movable antenna (MA) technologies into SWIPT systems aiming at enhancing information transmission for information decoding receivers (IDRs) and improving receive power of EHRs. We consider to maximize the weighted sum-rate of IDRs via jointly optimizing the active and passive beamforming at the base station (BS) and IRS, respectively, as well as the positions of MAs, while guaranteeing the requirements of all EHRs. To tackle this challenging task due to the non-convexity of associated optimization, we develop an efficient algorithm combining weighted minimal mean square error (WMMSE), block coordinate descent (BCD), majorization-minimization (MM), and penalty duality decomposition (PDD) frameworks. Besides, we present a feasibility characterization method to examine the achievability of EHRs' requirements. Simulation results demonstrate the significant benefits of our proposed solutions. Particularly, the optimized IRS configuration may exhibit higher performance gain than MA counterpart under our considered scenario.

cs.IT↗

arXiv2025

Reconfigurable Airspace: Synergizing Movable Antenna and Intelligent Surface for Low-Altitude ISAC Networks

Low-altitude unmanned aerial vehicle (UAV) networks are integral to future 6G integrated sensing and communication (ISAC) systems. However, their deployment is hindered by challenges stemming from high mobility of UAVs, complex propagation environments, and the inherent trade-offs between coexisting sensing and communication functions. This article proposes a novel framework that leverages movable antennas (MAs) and intelligent reflecting surfaces (IRSs) as dual enablers to overcome these limitations. MAs, through active transceiver reconfiguration, and IRSs, via passive channel reconstruction, can work in synergy to significantly enhance system performance. Our analysis first elaborates on the fundamental gains offered by MAs and IRSs, and provides simulation results that validate the immense potential of the MA-IRS-enabled ISAC architecture. Two core UAV deployment scenarios are then investigated: (i) UAVs as ISAC users, where we focus on achieving high-precision tracking and aerial safety, and (ii) UAVs as aerial network nodes, where we address robust design and complex coupled resource optimization. Finally, key technical challenges and research opportunities are identified and analyzed for each scenario, charting a clear course for the future design of advanced low-altitude ISAC networks.

cs.IT↗

arXiv2025

Wireless Sensing with Movable Intelligent Surface

Future wireless networks are envisioned to deliver not only gigabit communications but also ubiquitous sensing. Reconfigurable intelligent surfaces (RISs) have emerged to reshape radio propagation, recently showing considerable promise for wireless sensing. Still, their per-element electronic tuning incurs prohibitive hardware cost and power consumption. Motivated by the concept of fluid antenna system (FAS), this paper introduces a low-cost movable intelligent surface (MIS) for wireless sensing, which replaces element-wise electronic phase tuning with panel-wise mechanical reconfiguration. The MIS stacks a large fixed and a smaller movable pre-phased metasurface layers, whose differential position shifts synthesize distinct composite phase patterns, enabling multiple beam patterns for multi-target detection. We characterize a MIS-enabled multi-hop echo signal model with multi-target interference and then formulate a worst-case sensing signal-to-interference-plus-noise ratio (SINR) maximization problem that jointly designs MIS phase shifts and schedules MS2's position. A Riemannian Augmented Lagrangian Method (RALM)-based algorithm is developed to solve the formulated mixed-integer non-convex problem. We also derive a heuristic MIS beam steering design with closed-form phase distribution and position scheduling. Simulations validate MIS's beam pattern reconfiguration capability, show that the RALM-based scheme significantly outperforms the closed-form scheme in improving sensing SINR, and uncover a gain-diversity trade-off in beam patterns that informs the optimal choice of MIS configuration.

eess.SP↗

arXiv2025

PSG-MAE: Robust Multitask Sleep Event Monitoring using Multichannel PSG Reconstruction and Inter-channel Contrastive Learning

Polysomnography (PSG) signals are essential for studying sleep processes and diagnosing sleep disorders. Analyzing PSG data through deep neural networks (DNNs) for automated sleep monitoring has become increasingly feasible. However, the limited availability of datasets for certain sleep events often leads to DNNs focusing on a single task with a single-sourced training dataset. As a result, these models struggle to transfer to new sleep events and lack robustness when applied to new datasets. To address these challenges, we propose PSG-MAE, a mask autoencoder (MAE) based pre-training framework. By performing self-supervised learning on a large volume of unlabeled PSG data, PSG-MAE develops a robust feature extraction network that can be broadly applied to various sleep event monitoring tasks. Unlike conventional MAEs, PSG-MAE generates complementary masks across PSG channels, integrates a multichannel signal reconstruction method, and employs a self-supervised inter-channel contrastive learning (ICCL) strategy. This approach enables the encoder to capture temporal features from each channel while simultaneously learning latent relationships between channels, thereby enhancing the utilization of multichannel information. Experimental results show that PSG-MAE effectively captures both temporal details and inter-channel information from PSG signals. When the encoder pre-trained through PSG-MAE is fine-tuned with downstream feature decomposition networks, it achieves an accuracy of 83.7% for sleep staging and 90.45% for detecting obstructive sleep apnea, which highlights the framework's robustness and broad applicability.

cs.LG↗

arXiv2024

Throughput Maximization for Movable Antenna Systems with Movement Delay Consideration

In this paper, we model the minimum achievable throughput within a transmission block of restricted duration and aim to maximize it in movable antenna (MA)-enabled multiuser downlink communications. Particularly, we account for the antenna moving delay caused by mechanical movement, which has not been fully considered in previous studies, and reveal the trade-off between the delay and signal-to-interference-plus-noise ratio at users. To this end, we first consider a single-user setup to analyze the necessity of antenna movement. By quantizing the virtual angles of arrival, we derive the requisite region size for antenna moving, design the initial MA position, and elucidate the relationship between quantization resolution and moving region size. Furthermore, an efficient algorithm is developed to optimize MA position via successive convex approximation, which is subsequently extended to the general multiuser setup. Numerical results demonstrate that the proposed algorithms outperform fixed-position antenna schemes and existing ones without consideration of movement delay. Additionally, our algorithms exhibit excellent adaptability and stability across various transmission block durations and moving region sizes, and are robust to different antenna moving speeds. This allows the hardware cost of MA-aided systems to be reduced by employing low rotational speed motors.

cs.IT↗

arXiv2024

Movable Antenna Enabled Interference Network: Joint Antenna Position and Beamforming Design

This paper investigates the utility of movable antenna (MA) assistance for the multiple-input single-output (MISO) interference channel. We exploit an additional design degree of freedom provided by MA to enhance the desired signal and suppress interference so as to reduce the total transmit power of interference network. To this end, we jointly optimize the MA positions and transmit beamforming, subject to the signal-to-interference-plus-noise ratio constraints of users. To address the non-convex optimization problem, we propose an efficient iterative algorithm to alternately optimize the MA positions via successive convex approximation method and the transmit beamforming via second-order cone program approach. Numerical results demonstrate that the proposed MA-enabled MISO interference network outperforms its conventional counterpart without MA, which significantly enhances the capability of inter-cell frequency reuse and reduces the complexity of transmitter design.

cs.IT↗