arXiv subjects

Hongliang Zhang

Publications and source records attributed to Hongliang Zhang.

At least 91 records · Page 5Linked to original sources

arXiv2023

MetaRadar: Multi-target Detection for Reconfigurable Intelligent Surface Aided Radar Systems

As a widely used localization and sensing technique, radars will play an important role in future wireless networks. However, the wireless channels between the radar and the targets are passively adopted by traditional radars, which limits the performance of target detection. To address this issue, we propose to use the reconfigurable intelligent surface (RIS) to improve the detection accuracy of radar systems due to its capability to customize channel conditions by adjusting its phase shifts, which is referred to as MetaRadar. In such a system, it is challenging to jointly optimize both radar waveforms and RIS phase shifts in order to improve the multi-target detection performance. To tackle this challenge, we design a waveform and phase shift optimization (WPSO) algorithm to effectively solve the multi-target detection problem, and also analyze the performance of the proposed MetaRadar scheme theoretically. Simulation results show that the detection performance of the MetaRadar scheme is significantly better than that of the traditional radar schemes.

eess.SP↗

arXiv2023

Holographic Integrated Sensing and Communications: Principles, Technology, and Implementation

Integrated sensing and communication (ISAC) has attracted much attention as a promising approach to alleviate spectrum congestion. However, traditional ISAC systems rely on phased arrays to provide high spatial diversity, where enormous power-consuming components such as phase shifters are used, leading to the high power consumption of the system. In this article, we introduce holographic ISAC, a new paradigm to enable high spatial diversity with low power consumption by using reconfigurable holographic surfaces (RHSs), which is an innovative type of planar antenna with densely deployed metamaterial elements. We first introduce the hardware structure and working principle of the RHS and then propose a novel holographic beamforming scheme for ISAC. Moreover, we build an RHS-enabled hardware prototype for ISAC and evaluate the system performance in the built prototype. Simulation and experimental results verify the feasibility of holographic ISAC and reveal the great potential of the RHS for reducing power consumption. Furthermore, future research directions and key challenges related to holographic ISAC are discussed.

eess.SP↗

arXiv2023

Generative AI-empowered Simulation for Autonomous Driving in Vehicular Mixed Reality Metaverses

In the vehicular mixed reality (MR) Metaverse, the distance between physical and virtual entities can be overcome by fusing the physical and virtual environments with multi-dimensional communications in autonomous driving systems. Assisted by digital twin (DT) technologies, connected autonomous vehicles (AVs), roadside units (RSU), and virtual simulators can maintain the vehicular MR Metaverse via digital simulations for sharing data and making driving decisions collaboratively. However, large-scale traffic and driving simulation via realistic data collection and fusion from the physical world for online prediction and offline training in autonomous driving systems are difficult and costly. In this paper, we propose an autonomous driving architecture, where generative AI is leveraged to synthesize unlimited conditioned traffic and driving data in simulations for improving driving safety and traffic efficiency. First, we propose a multi-task DT offloading model for the reliable execution of heterogeneous DT tasks with different requirements at RSUs. Then, based on the preferences of AV's DTs and collected realistic data, virtual simulators can synthesize unlimited conditioned driving and traffic datasets to further improve robustness. Finally, we propose a multi-task enhanced auction-based mechanism to provide fine-grained incentives for RSUs in providing resources for autonomous driving. The property analysis and experimental results demonstrate that the proposed mechanism and architecture are strategy-proof and effective, respectively.

cs.AI↗

arXiv2023

Generative AI-empowered Effective Physical-Virtual Synchronization in the Vehicular Metaverse

Metaverse seamlessly blends the physical world and virtual space via ubiquitous communication and computing infrastructure. In transportation systems, the vehicular Metaverse can provide a fully-immersive and hyperreal traveling experience (e.g., via augmented reality head-up displays, AR-HUDs) to drivers and users in autonomous vehicles (AVs) via roadside units (RSUs). However, provisioning real-time and immersive services necessitates effective physical-virtual synchronization between physical and virtual entities, i.e., AVs and Metaverse AR recommenders (MARs). In this paper, we propose a generative AI-empowered physical-virtual synchronization framework for the vehicular Metaverse. In physical-to-virtual synchronization, digital twin (DT) tasks generated by AVs are offloaded for execution in RSU with future route generation. In virtual-to-physical synchronization, MARs customize diverse and personal AR recommendations via generative AI models based on user preferences. Furthermore, we propose a multi-task enhanced auction-based mechanism to match and price AVs and MARs for RSUs to provision real-time and effective services. Finally, property analysis and experimental results demonstrate that the proposed mechanism is strategy-proof and adverse-selection free while increasing social surplus by 50%.

cs.AI↗

arXiv2023

Illegal Intelligent Reflecting Surface Based Active Channel Aging: When Jammer Can Attack Without Power and CSI

Illegal intelligent reflecting surfaces (I-IRSs), i.e., the illegal deployment and utilization of IRSs, impose serious harmful impacts on wireless networks. The existing I-IRS-based illegal jammer (IJ) requires channel state information (CSI) or extra power or both, and therefore, the I-IRS-based IJ seems to be difficult to implement in practical wireless networks. To raise concerns about significant potential threats posed by I-IRSs, we propose an alternative method to jam legitimate users (LUs) without relying on the CSI. By using an I-IRS to actively change wireless channels, the orthogonality of multi-user beamforming vectors and the co-user channels is destroyed, and significant inter-user interference is then caused, which is referred to as active channel aging. Such a fully-passive jammer (FPJ) can launch jamming attacks on multi-user multiple-input single-output (MU-MISO) systems via inter-user interference caused by active channel aging, where the IJ requires no additional transmit power and instantaneous CSI. The simulation results show the effectiveness of the proposed FPJ scheme. Moreover, we also investigate how the transmit power and the number of quantization phase shift bits influence the jamming performance.

cs.IT↗

arXiv2023

Technology Trends for Massive MIMO towards 6G

At the dawn of the next-generation wireless systems and networks, massive multiple-input multiple-output (MIMO) has been envisioned as one of the enabling technologies. With the continued success of being applied in the 5G and beyond, the massive MIMO technology has demonstrated its advantageousness, integrability, and extendibility. Moreover, several evolutionary features and revolutionizing trends for massive MIMO have gradually emerged in recent years, which are expected to reshape the future 6G wireless systems and networks. Specifically, the functions and performance of future massive MIMO systems will be enabled and enhanced via combining other innovative technologies, architectures, and strategies such as intelligent omni-surfaces (IOSs)/intelligent reflecting surfaces (IRSs), artificial intelligence (AI), THz communications, cell free architecture. Also, more diverse vertical applications based on massive MIMO will emerge and prosper, such as wireless localization and sensing, vehicular communications, non-terrestrial communications, remote sensing, inter-planetary communications.

cs.IT↗

arXiv2022

Reconfigurable Holographic Surface: A New Paradigm to Implement Holographic Radio

Ultra-massive multiple-input multiple-output (MIMO) is one of the key enablers in the forthcoming 6G networks to provide high-speed data services by exploiting spatial diversity. In this article, we consider a new paradigm termed holographic radio for ultra-massive MIMO, where numerous tiny and inexpensive antenna elements are integrated to realize high directive gain with low hardware cost. We propose a practical way to enable holographic radio by a novel metasurface-based antenna, i.e., reconfigurable holographic surface (RHS). Specifically, RHSs incorporating densely packed tunable metamaterial elements are capable of holographic beamforming. Based on the working principle and hardware design of RHSs, we conduct full-wave analyses of RHSs and build an RHS-aided point-to-point communication platform supporting real-time data transmission. Both simulated and experimental results show that the RHS has great potential to achieve high directive gain with a limited size, thereby substantiating the feasibility of RHS-enabled holographic radio. Moreover, future research directions for RHS-enabled holographic radio are also discussed.

eess.SP↗

arXiv2022

EPViSA: Efficient Auction Design for Real-time Physical-Virtual Synchronization in the Metaverse

Metaverse can obscure the boundary between the physical and virtual worlds. Specifically, for the Metaverse in vehicular networks, i.e., the vehicular Metaverse, vehicles are no longer isolated physical spaces but interfaces that extend the virtual worlds to the physical world. Accessing the Metaverse via autonomous vehicles (AVs), drivers and passengers can immerse in and interact with 3D virtual objects overlaying views of streets on head-up displays (HUD) via augmented reality (AR). The seamless, immersive, and interactive experience rather relies on real-time multi-dimensional data synchronization between physical entities, i.e., AVs, and virtual entities, i.e., Metaverse billboard providers (MBPs). However, mechanisms to allocate and match synchronizing AV and MBP pairs to roadside units (RSUs) in a synchronization service market, which consists of the physical and virtual submarkets, are vulnerable to adverse selection. In this paper, we propose an enhanced second-score auction-based mechanism, named EPViSA, to allocate physical and virtual entities in the synchronization service market of the vehicular Metaverse. The EPViSA mechanism can determine synchronizing AV and MBP pairs simultaneously while protecting participants from adverse selection and thus achieving high total social welfare. We propose a synchronization scoring rule to eliminate the external effects from the virtual submarkets. Then, a price scaling factor is introduced to enhance the allocation of synchronizing virtual entities in the virtual submarkets. Finally, rigorous analysis and extensive experimental results demonstrate that EPViSA can achieve at least 96\% of the social welfare compared to the omniscient benchmark while ensuring strategy-proof and adverse selection free through a simulation testbed.

cs.NI↗

arXiv2022

Intelligent Omni-Surfaces Aided Wireless Communications: Does the Reciprocity Hold?

Intelligent omni-surfaces (IOS) have attracted great attention recently due to its potential to achieve full-dimensional communications by simultaneously reflecting and refracting signals toward both sides of the surface. However, it still remains an open question whether the reciprocity holds between the uplink and downlink channels in the IOS-aided wireless communications. In this work, we first present a physics-compliant IOS related channel model, based on which the channel reciprocity is investigated. We then demonstrate the angle-dependent electromagnetic response of the IOS element in terms of both incident and departure angles. This serves as the key feature of IOS that drives our analytical results on beam non-reciprocity. Finally, simulation and experimental results are provided to verify our theoretical analyses.

eess.SP↗

arXiv2022

Roadmap on spatiotemporal light fields

Spatiotemporal sculpturing of light pulse with ultimately sophisticated structures represents the holy grail of the human everlasting pursue of ultrafast information transmission and processing as well as ultra-intense energy concentration and extraction. It also holds the key to unlock new extraordinary fundamental physical effects. Traditionally, spatiotemporal light pulses are always treated as spatiotemporally separable wave packet as solution of the Maxwell's equations. In the past decade, however, more generalized forms of spatiotemporally nonseparable solution started to emerge with growing importance for their striking physical effects. This roadmap intends to highlight the recent advances in the creation and control of increasingly complex spatiotemporally sculptured pulses, from spatiotemporally separable to complex nonseparable states, with diverse geometric and topological structures, presenting a bird's eye viewpoint on the zoology of spatiotemporal light fields and the outlook of future trends and open challenges.

physics.optics↗

arXiv2022

Topologically protected generation of spatiotemporal optical vortices with nonlocal spatial-mirror-symmetry-breaking metasurface

Recently nonlocal spatial-mirror-symmetry-breaking metasurfaces have been proposed to generate spatiotemporal optical vortices (STOVs), which carry transverse orbital angular momenta. Here we investigate the topological property of the STOV generator and show that spatial mirror symmetry breaking introduces a synthetic parameter dimension associated with the metasurface geometry. Furthermore, we demonstrate that there are well-defined vortices emerging with the synthetic parameter dimension, which can topologically protect the STOV generation robustly against structural perturbations and disorders. Since the vortices are always `created' or `annihilated' together in pairs of opposite charges in the ${{k}_{x}}\!-\!ω$ domain, the total topological charge of these vortices is a conserved quantity. Our studies not only provide a new topological perspective for STOV generation but also lay a solid foundation for potential applications of STOV metasurfaces integrated with other optoelectronic devices, because of their robust immunity to fabrication defects.

physics.optics↗

arXiv2022

Intelligent Omni-Surfaces: Simultaneous Refraction and Reflection for Full-dimensional Wireless Communications

The development of metasurfaces has unlocked various use cases in wireless communication networks to improve performance by manipulating the propagation environment. Intelligent omni-surface (IOS), an innovative technique in this category, is proposed for coverage extension. In contrast to the widely studied reflective metasurfaces, i.e., intelligent reflecting surfaces (IRSs), which can only serve receivers located on the same side of the transmitter, the IOS can achieve full-dimensional wireless communications by enabling the simultaneous reflection and refraction of the surface, and thus users on both sides can be served. In this paper, we provide a comprehensive overview of the state-of-the-art in IOS from the perspective of wireless communications, with the emphasis on their design principles, channel modeling, beamforming design, experimental implementation and measurements, as well as possible applications in future cellular networks. We first describe the basic concepts of metasurfaces, and introduce the corresponding design principles for different types of metasurfaces. Moreover, we elaborate on the reflective-refractive model for each IOS element and the channel model for IOS-aided wireless communication systems. Furthermore, we show how to achieve full-dimensional wireless communications with the IOS for three different scenarios. In particular, we present the implementation of an IOS-aided wireless communication prototype and report its experimental measurement results. Finally, we outline some potential future directions and challenges in this area.

cs.IT↗

arXiv2022

Intelligent Omni-Surfaces: Reflection-Refraction Circuit Model, Full-Dimensional Beamforming, and System Implementation

The intelligent omni-surface (IOS) is a dynamic metasurface that has recently been proposed to achieve full-dimensional communications by realizing the dual function of anomalous reflection and anomalous refraction. Existing research works provide only simplified models for the reflection and refraction responses of the IOS, which do not explicitly depend on the physical structure of the IOS and the angle of incidence of the electromagnetic (EM) wave. Therefore, the available reflection-refraction models are insufficient to characterize the performance of full-dimensional communications. In this paper, we propose a complete and detailed circuit-based reflection-refraction model for the IOS, which is formulated in terms of the physical structure and equivalent circuits of the IOS elements, as well as we validate it against full-wave EM simulations. Based on the proposed circuit-based model for the IOS, we analyze the asymmetry between the reflection and transmission coefficients. Moreover, the proposed circuit-based model is utilized for optimizing the hybrid beamforming of IOS-assisted networks and hence improving the system performance. To verify the circuit-based model, the theoretical findings, and to evaluate the performance of full-dimensional beamforming, we implement a prototype of IOS and deploy an IOS-assisted wireless communication testbed to experimentally measure the beam patterns and to quantify the achievable rate. The obtained experimental results validate the theoretical findings and the accuracy of the proposed circuit-based reflection-refraction model for IOSs.

cs.IT↗

arXiv2022

Reconfigurable Refractive Surfaces: An Energy-Efficient Way to Holographic MIMO

Holographic Multiple Input Multiple Output (HMIMO), which integrates massive antenna elements into a compact space to achieve a spatially continuous aperture, plays an important role in future wireless networks. With numerous antenna elements, it is hard to implement the HMIMO via phased arrays due to unacceptable power consumption. To address this issue, reconfigurable refractive surface (RRS) is an energy efficient enabler of HMIMO since the surface is free of expensive phase shifters. Unlike traditional metasurfaces working as passive relays, the RRS is used as transmit antennas, where the far-field approximation does not hold anymore, urging a new performance analysis framework. In this letter, we first derive the data rate of an RRS-based single-user downlink system, and then compare its power consumption with the phased array. Simulation results verify our analysis and show that the RRS is an energy-efficient way to HMIMO.

cs.IT↗

arXiv2022

Meta-material Sensor Based Internet of Things: Design, Optimization, and Implementation

For many applications envisioned for the Internet of Things (IoT), it is expected that the sensors will have very low costs and zero power, which can be satisfied by meta-material sensor based IoT, i.e., meta-IoT. As their constituent meta-materials can reflect wireless signals with environment-sensitive reflection coefficients, meta-IoT sensors can achieve simultaneous sensing and transmission without any active modulation. However, to maximize the sensing accuracy, the structures of meta-IoT sensors need to be optimized considering their joint influence on sensing and transmission, which is challenging due to the high computational complexity in evaluating the influence, especially given a large number of sensors. In this paper, we propose a joint sensing and transmission design method for meta-IoT systems with a large number of meta-IoT sensors, which can efficiently optimize the sensing accuracy of the system. Specifically, a computationally efficient received signal model is established to evaluate the joint influence of meta-material structure on sensing and transmission. Then, a sensing algorithm based on deep unsupervised learning is designed to obtain accurate sensing results in a robust manner. Experiments with a prototype verify that the system has a higher sensitivity and a longer transmission range compared to existing designs, and can sense environmental anomalies correctly within 2 meters.

eess.SP↗

arXiv2022

Energy-Constrained Computation Offloading in Space-Air-Ground Integrated Networks using Distributionally Robust Optimization

With the rapid development of connecting massive devices to the Internet, especially for remote areas without cellular network infrastructures, space-air-ground integrated networks (SAGINs) emerge and offload computation-intensive tasks. In this paper, we consider a SAGIN, where multiple low-earth-orbit (LEO) satellites providing connections to the cloud server, an unmanned aerial vehicle (UAV), and nearby base stations (BSs) providing edge computing services are included. The UAV flies along a fixed trajectory to collect tasks generated by Internet of Things (IoT) devices, and forwards these tasks to a BS or the cloud server for further processing. To facilitate efficient processing, the UAV needs to decide where to offload as well as the proportion of offloaded tasks. However, in practice, due to the variability of environment and actual demand, the amount of arrival tasks is uncertain. If the deterministic optimization is utilized to develop offloading strategy, unnecessary system overhead or higher task drop rate may occur, which severely damages the system robustness. To address this issue, we characterize the uncertainty with a data-driven approach, and formulate a distributionally robust optimization problem to minimize the expected energy-constrained system latency under the worst-case probability distribution. Furthermore, the distributionally robust latency optimization algorithm is proposed to reach the suboptimal solution. Finally, we perform simulations on the realworld data set, and compare with other benchmark schemes to verify the efficiency and robustness of our proposed algorithm.

cs.IT↗

arXiv2022

Towards Ubiquitous Sensing and Localization With Reconfigurable Intelligent Surfaces

In future cellular systems, wireless localization and sensing functions will be built-in for specific applications, e.g., navigation, transportation, and healthcare, and to support flexible and seamless connectivity. Driven by this trend, the need rises for fine-resolution sensing solutions and cm-level localization accuracy, while the accuracy of current wireless systems is limited by the quality of the propagation environment. Recently, with the development of new materials, reconfigurable intelligent surfaces (RISs) provide an opportunity to reshape and control the electromagnetic characteristics of the environment, which can be utilized to improve the performance of wireless sensing and localization. In this tutorial, we will first review the background and motivation to utilize wireless signals for sensing and localization. Next, we introduce how to incorporate RIS into applications of sensing and localization, including key challenges and enabling techniques, and then some case studies will be presented. Finally, future research directions will also be discussed.

cs.IT↗

arXiv2021

Reconfigurable Holographic Surfaces for Future Wireless Communications

Future wireless communications look forward to constructing a ubiquitous intelligent information network with high data rates through cost-efficient devices. Benefiting from the tunability and programmability of metamaterials, the reconfigurable holographic surface (RHS) composed of numerous metamaterial radiation elements is developed as a promising solution to fulfill such challenging visions. The RHS is more likely to serve as an ultra-thin and lightweight surface antenna integrated with the transceiver to generate beams with desirable directions by leveraging the holographic principle. This is different from reconfigurable intelligent surfaces (RISs) widely used as passive relays due to the reflection characteristic. In this article, we investigate RHS-aided wireless communications. Starting with a basic introduction of the RHS including its hardware structure, holographic principle, and fabrication methodologies, we propose a hybrid beamforming scheme for RHS-aided multi-user communication systems. A joint sum-rate maximization algorithm is then developed where the digital beamforming performed at the base station and the holographic beamforming performed at the RHS are optimized iteratively. Furthermore, key challenges in RHS-aided wireless communications are also discussed.

eess.SP↗