SearcharxivSearch

arXiv subjects

Hongyang Zhang

Publications and source records attributed to Hongyang Zhang.

At least 19 recordsLinked to original sources

Difference-in-Differences on a Censored Rating Scale Can Manufacture an Effect: Evidence from a Pre-Registered LLM-Judge Audit

Audits of LLM judges certify a bias by contrasting matched conditions, and the strongest designs difference twice: a within-item contrast between two candidate responses, differenced again across a manipulated attribute, read off a bounded rating scale. We show that this endpoint is not identified on the scale that reports it. Each term of the double difference is censored by its own share, so the observed statistic confounds differential preference with differential attenuation: a severity shift common to both responses manufactures an interaction whenever the two censor it unequally, as unequal distances from the bounds make them, exactly where good stimuli place them. We exhibit the failure inside a pre-registered audit of a frozen pedagogy judge, sealed before the first of its 990 calls. The registered primary endpoint, the effect of a stated learner profile on the judge's scaffolding preference, is null: $+0.085$ points (95\% BCa $[-0.167, +0.353]$, $p = 0.684$). The audit's one nominally significant interaction, $+0.378$ ($p = 0.002$), is not identified as preference: a construction containing zero differential preference reproduces 79 to 85\% of it from the observed severity shift and the scale floor alone. We derive the mechanism in closed form and show that its contribution is measurable from an audit's own ratings.

cs.CL

Rethinking LLM-Judged Helpfulness as a Pedagogy Signal: A Pre-Registered Audit Across Tutor Models

LLM tutoring poses a measurement problem: can a general-purpose helpfulness rubric distinguish direct answer-giving from pedagogical guidance? We audit this signal in a pre-registered study. Within each of three tutor bases, we compare conversational and pedagogical policies instantiated with the same underlying model and paired with one fixed weak simulated student. Deterministic detectors measure answer leakage and next-turn independent work. Claude Opus 4.8 is the frozen, condition-blind primary judge. After the Opus scores were fixed, GPT-5.6 Sol was prospectively specified for a post hoc robustness audit of the same 1,179 confirmatory answer-phase tutor turns under the frozen helpfulness and pedagogy rubrics. On the primary base under Opus, the policies do not differ significantly in helpfulness but are perfectly rank-separated under the pedagogy rubric (Cliff's $|\delta|{=}0.10$ vs. $1.0$). Across the two judges, pedagogy contrasts retain their direction where detected, whereas the helpfulness ordering is judge-contingent, reversing between judges on two of three bases. In an Opus-only ablation, seven primary-base policies span $2.3$ points in mean judged pedagogy within a $0.25$-point band of mean judged helpfulness. Separately, answer-revealing turns are followed by less independent student work on every base, a result that is judge-invariant by construction. In this controlled setting, general-purpose helpfulness is not a reliable pedagogy signal. Tutor evaluation should pair pedagogy-targeted rubrics with deterministic process measures.

cs.CL

Interpretation-Oriented Cloud Removal via Observation-Anchored Residual Flow with Geo-Contextual Alignment

Cloud removal (CR) is essential for optical remote sensing, serving as a prerequisite for reliable downstream interpretation, such as semantic segmentation and change detection. However, existing CR approaches often prioritize visual realism while overlooking their impact on subsequent analytical tasks, leading to semantic drift and degraded downstream performance. To address this issue, we propose Geo-Anchored Cloud Removal (GACR), a unified framework that jointly ensures faithful reconstruction and robust interpretability. At its core, GACR incorporates Observation-Anchored Residual Flow (OAR-Flow), which reformulates CR as a physically grounded residual inversion process. By anchoring the generative trajectory to the cloudy observation rather than pure noise, OAR-Flow enables fast, stable, and faithful reconstruction. To further preserve semantic structures critical for downstream interpretation, GACR integrates Geo-Contextual Prior Alignment (GCPA) to constrain the reconstruction within a semantic manifold induced by a Vision Foundation Model (VFM). Consequently, GACR strictly maintains the spatial-semantic integrity of complex landscapes. Extensive experiments across six CR datasets and twelve downstream tasks demonstrate that GACR produces superior reconstruction quality while consistently improving downstream task accuracy. The code is available at https://github.com/wzy6055/GACR.

cs.CV

D$^3$-Subsidy: Online and Sequential Driver Subsidy Decision-Making for Large-Scale Ride-Hailing Market

Ride-hailing platforms like DiDi Chuxing operate in highly dynamic environments where balancing driver supply and passenger demand is critical. Although driver-side subsidies serve as a primary lever to align these forces and improve key KPIs like completed rides (\texttt{Rides}) and gross merchandise value (\texttt{GMV}), optimizing them in production requires simultaneously meeting three constraints: (i) responsiveness to stochastic shocks, (ii) strict subsidy-rate caps, and (iii) low-latency execution at city scale. These requirements rule out expensive per-order optimization, calling for a forward-looking, constraint-aware city-level controller for online sequential decision making. To meet these requirements, we introduce D$^3$-Subsidy (Dynamic Driver-side Diffusion-based Subsidy), a hierarchical diffusion-based framework for deployable city-wide subsidy control. To bridge the train-inference gap, D$^3$-Subsidy employs a prefix-conditioned diffusion model that samples plausible future trajectories from immutable historical observations, ensuring the training protocol aligns with the fixed-history nature of online deployment. These generated plans are then decoded by a context-conditioned inverse module into low-dimensional city-level control signals. For scalable execution, we bridge the gap between city-level planning and fine-grained dispatch via a Lagrangian-dual-derived mapping, which embeds subsidy-rate caps directly into order-driver incentives without iterative optimization. Additionally, a multi-city pretraining strategy with parameter-efficient fine-tuning enables robust transfer across heterogeneous cities. Extensive offline evaluations demonstrate that D$^3$-Subsidy improves \texttt{Rides} and \texttt{GMV} while enhancing cap compliance, and a real-world A/B test confirms significant uplift while keeping budget-related violation metrics within operational thresholds.

cs.LG

Attention Drift: What Autoregressive Speculative Decoding Models Learn

Speculative decoding accelerates LLM inference by drafting future tokens with a small model, but drafter models degrade sharply under template perturbation and long-context inputs. We identify a previously-unreported phenomenon we call \textbf{attention drift}: as the drafter generates successive tokens within a speculation chain, attention progressively moves from the prompt onto its own recently-generated tokens. We observe this across both \emph{EAGLE3} drafters and \emph{MTP heads}, suggesting drift is a property of drafter designs. We trace this to the un-normalized residual path between chain steps: the drafter's hidden state magnitude grows monotonically with chain depth, which exhibits dynamics consistent with additional pre-norm transformer layers stacked on the target rather than as a standalone autoregressive predictor. In order to limit the growth, we propose two architectural changes: Post-norm on the drafter hidden states and per-hidden-state RMSNorm after capturing target hidden states. Our interventions improve acceptance length over the current leading model, pre-norm EAGLE3, by up to $2\times$ under template perturbation, $1.18\times$ on long-context tasks, and $1.10\times$ on seven standard benchmarks spanning multi-turn chat, math, and coding. Our changes also allow shorter train-time-test depths to generalize over longer drafting sequences.

cs.LG

MPerS: Dynamic MLLM MixExperts Perception-Guided Remote Sensing Scene Segmentation

The multimodal fusion of images and scene captions has been extensively explored and applied in various fields. However, when dealing with complex remote sensing (RS) scenes, existing studies have predominantly concentrated on architectural optimizations for integrating textual semantic information with visual features, while largely neglecting the generation of high-quality RS captions and the investigation of their effectiveness in multimodal semantic fusion.In this context, we propose the Dynamic MLLM Mixture-of-Experts Perception-Guided Remote Sensing Scene Segmentation, referred to as MPerS.We design multiple prompts for MLLMs to generate high-quality RS captions, enabling MLLMs to perceive RS scenes from diverse expert perspectives. DINOv3 is employed to extract dense visual representations of land-covers.We design a Dynamic MixExperts module that adaptively integrates the most effective textual semantics. Linguistic Query Guided Attention is constructed to utilize textual semantic information to guide visual features for precise segmentation. The MLLMs include LLaVA, ChatGPT, and Qwen. Our method achieves superior performance on three public semantic segmentation RS datasets.

cs.CV

InfoGeo: Information-Theoretic Object-Centric Learning for Cross-View Generalizable UAV Geo-Localization

Cross-view geo-localization (CVGL) is fundamental for precise localization and navigation in GPS-denied environments, aiming to match ground or UAV imagery with satellite views. Existing approaches often rely on global feature alignment, but they suffer from substantial domain shifts induced by varying regional textures and weather conditions. This issue becomes even more pronounced in UAV-based scenarios, where the broader perspective inevitably introduces dense, fine-grained objects, creating significant visual clutter. To address this, we draw inspiration from Object-Centric Learning (OCL) and propose InfoGeo, an information-theoretic framework designed to enhance robustness and generalization. InfoGeo reformulates the optimization as an information bottleneck process with two core objectives: (i) maximizing view-invariant information by aligning the object-centric structural relations across views, and (ii) minimizing view-specific noisy signals through cross-view knowledge constraints. Extensive evaluations across diverse benchmarks and challenging scenarios demonstrate that InfoGeo significantly outperforms state-of-the-art methods.

cs.CV

GeoLink: A 3D-aware Framework to Improve Generalization for Cross-view Geo-localization

Generalizable cross-view geo-localization aims to match the same location across views in unseen regions and conditions without GPS supervision. Its core difficulty lies in severe semantic inconsistency caused by viewpoint variation and poor generalization under domain shift. Existing methods mainly rely on 2D correspondence, but they are easily distracted by redundant shared information across views, leading to less transferable representations. To address this, we propose GeoLink, a 3D-aware semantic-consistent framework for Generalizable cross-view geo-localization. Specifically, we offline reconstruct scene point clouds from multi-view drone images using VGGT, providing stable structural priors. Based on these 3D anchors, we improve 2D representation learning in two complementary ways. A Geometric-aware Semantic Refinement module mitigates potentially redundant and view-biased dependencies in 2D features under 3D guidance. In addition, a Unified View Relation Distillation module transfers 3D structural relations to 2D features, improving cross-view alignment while preserving a 2D-only inference pipeline. Extensive experiments on multiple benchmarks show that GeoLink consistently outperforms state-of-the-art methods and achieves superior generalization across unseen domains and diverse weather environments.

cs.CV

MedAD-R1: Eliciting Consistent Reasoning in Interpretible Medical Anomaly Detection via Consistency-Reinforced Policy Optimization

Medical Anomaly Detection (MedAD) presents a significant opportunity to enhance diagnostic accuracy using Large Multimodal Models (LMMs) to interpret and answer questions based on medical images. However, the reliance on Supervised Fine-Tuning (SFT) on simplistic and fragmented datasets has hindered the development of models capable of plausible reasoning and robust multimodal generalization. To overcome this, we introduce MedAD-38K, the first large-scale, multi-modal, and multi-center benchmark for MedAD featuring diagnostic Chain-of-Thought (CoT) annotations alongside structured Visual Question-Answering (VQA) pairs. On this foundation, we propose a two-stage training framework. The first stage, Cognitive Injection, uses SFT to instill foundational medical knowledge and align the model with a structured think-then-answer paradigm. Given that standard policy optimization can produce reasoning that is disconnected from the final answer, the second stage incorporates Consistency Group Relative Policy Optimization (Con-GRPO). This novel algorithm incorporates a crucial consistency reward to ensure the generated reasoning process is relevant and logically coherent with the final diagnosis. Our proposed model, MedAD-R1, achieves state-of-the-art (SOTA) performance on the MedAD-38K benchmark, outperforming strong baselines by more than 10\%. This superior performance stems from its ability to generate transparent and logically consistent reasoning pathways, offering a promising approach to enhancing the trustworthiness and interpretability of AI for clinical decision support.

cs.CV

Position-Aware Self-supervised Representation Learning for Cross-mode Radar Signal Recognition

Radar signal recognition in open electromagnetic environments is challenging due to diverse operating modes and unseen radar types. Existing methods often overlook position relations in pulse sequences, limiting their ability to capture semantic dependencies over time. We propose RadarPos, a position-aware self-supervised framework that leverages pulse-level temporal dynamics without complex augmentations or masking, providing improved position relation modeling over contrastive learning or masked reconstruction. Using this framework, we evaluate cross-mode radar signal recognition under the long-tailed setting to assess adaptability and generalization. Experimental results demonstrate enhanced discriminability and robustness, highlighting practical applicability in real-world electromagnetic environments.

eess.SP

CustomX: Unified Character, Action, and Scene Customization in Video World Models

Recent advances in world models have greatly enhanced interactive environment simulation. Existing methods mainly fall into two categories: (1) static world generation models, which construct 3D environments without active agents, and (2) controllable-entity models, which allow a single entity to perform limited actions in an otherwise uncontrollable environment. In this work, we introduce CustomX, leveraging the realism and structural grounding of static world generation while extending controllable-entity models to support user-specified characters capable of performing open-ended actions. Users can provide a 3DGS scene and a character, then use natural language to direct the character to perform diverse behaviors, ranging from basic locomotion to object-centric interactions, while freely exploring the environment. CustomX synthesizes temporally coherent video clips that preserve visual fidelity with the provided scene and character, formulated as a conditional autoregressive video generation problem. Built upon a pre-trained video generator, our training strategy significantly enhances motion dynamics while maintaining generalization across actions and characters. Our evaluation covers a broad range of aspects, including visual quality, character consistency, action controllability, and long-horizon coherence.

cs.CV

Spatia: Video Generation with Updatable Spatial Memory

Existing video generation models struggle to maintain long-term spatial and temporal consistency due to the dense, high-dimensional nature of video signals. To overcome this limitation, we propose Spatia, a spatial memory-aware video generation framework that explicitly preserves a 3D scene point cloud as persistent spatial memory. Spatia iteratively generates video clips conditioned on this spatial memory and continuously updates it through visual SLAM. This dynamic-static disentanglement design enhances spatial consistency throughout the generation process while preserving the model's ability to produce realistic dynamic entities. Furthermore, Spatia enables applications such as explicit camera control and 3D-aware interactive editing, providing a geometrically grounded framework for scalable, memory-driven video generation.

cs.CV

LSVOS 2025 Challenge Report: Recent Advances in Complex Video Object Segmentation

This report presents an overview of the 7th Large-scale Video Object Segmentation (LSVOS) Challenge held in conjunction with ICCV 2025. Besides the two traditional tracks of LSVOS that jointly target robustness in realistic video scenarios: Classic VOS (VOS), and Referring VOS (RVOS), the 2025 edition features a newly introduced track, Complex VOS (MOSEv2). Building upon prior insights, MOSEv2 substantially increases difficulty, introducing more challenging but realistic scenarios including denser small objects, frequent disappear/reappear events, severe occlusions, adverse weather and lighting, etc., pushing long-term consistency and generalization beyond curated benchmarks. The challenge retains standard ${J}$, $F$, and ${J\&F}$ metrics for VOS and RVOS, while MOSEv2 adopts ${J\&\dot{F}}$ as the primary ranking metric to better evaluate objects across scales and disappearance cases. We summarize datasets and protocols, highlight top-performing solutions, and distill emerging trends, such as the growing role of LLM/MLLM components and memory-aware propagation, aiming to chart future directions for resilient, language-aware video segmentation in the wild.

cs.CV

SkyLink: Unifying Street-Satellite Geo-Localization via UAV-Mediated 3D Scene Alignment

Cross-view geo-localization aims at establishing location correspondences between different viewpoints. Existing approaches typically learn cross-view correlations through direct feature similarity matching, often overlooking semantic degradation caused by extreme viewpoint disparities. To address this unique problem, we focus on robust feature retrieval under viewpoint variation and propose the novel SkyLink method. We firstly utilize the Google Retrieval Enhancement Module to perform data enhancement on street images, which mitigates the occlusion of the key target due to restricted street viewpoints. The Patch-Aware Feature Aggregation module is further adopted to emphasize multiple local feature aggregations to ensure the consistent feature extraction across viewpoints. Meanwhile, we integrate the 3D scene information constructed from multi-scale UAV images as a bridge between street and satellite viewpoints, and perform feature alignment through self-supervised and cross-view contrastive learning. Experimental results demonstrate robustness and generalization across diverse urban scenarios, which achieve 25.75$\%$ Recall@1 accuracy on University-1652 in the UAVM2025 Challenge. Code will be released at https://github.com/HRT00/CVGL-3D.

cs.CV

SAMSON: 3rd Place Solution of LSVOS 2025 VOS Challenge

Large-scale Video Object Segmentation (LSVOS) addresses the challenge of accurately tracking and segmenting objects in long video sequences, where difficulties stem from object reappearance, small-scale targets, heavy occlusions, and crowded scenes. Existing approaches predominantly adopt SAM2-based frameworks with various memory mechanisms for complex video mask generation. In this report, we proposed Segment Anything with Memory Strengthened Object Navigation (SAMSON), the 3rd place solution in the MOSE track of ICCV 2025, which integrates the strengths of stateof-the-art VOS models into an effective paradigm. To handle visually similar instances and long-term object disappearance in MOSE, we incorporate a long-term memorymodule for reliable object re-identification. Additionly, we adopt SAM2Long as a post-processing strategy to reduce error accumulation and enhance segmentation stability in long video sequences. Our method achieved a final performance of 0.8427 in terms of J &F in the test-set leaderboard.

cs.CV

A perfect matching reciprocity method for embedding multiple hypercubes in an augmented cube: Applications to Hamiltonian decomposition and fault-tolerant Hamiltonicity

This paper focuses on the embeddability of hypercubes in an important class of Cayley graphs, known as augmented cubes. An $n$-dimensional augmented cube $AQ_n$ is constructed by augmenting the $n$-dimensional hypercube $Q_n$ with additional edges, thus making $Q_n$ a spanning subgraph of $AQ_n$. Dong and Wang (2019) first posed the problem of determining the number of $Q_n$-isomorphic subgraphs in $AQ_n$, which still remains open. By exploiting the Cayley properties of $AQ_n$, we establish a lower bound for this number. What's more, we develop a method for constructing pairs of $Q_n$-isomorphic subgraphs in $AQ_n$ with the minimum number of common edges. This is accomplished through the use of reciprocal perfect matchings, a technique that also relies on the Cayley property of $AQ_n$. As an application, we prove that $AQ_n$ admits $n-1$ edge-disjoint Hamiltonian cycles when $n\geq3$ is odd and $n-2$ cycles when $n$ is even, thereby confirming a conjecture by Hung (2015) for the odd case. Additionally, we prove that $AQ_n$ has a fault-free cycle of every even length from $4$ to $2^n$ with up to $4n-8$ faulty edges, when each vertex is incident to at least two fault-free edges. This result not only provides an alternative proof for the fault-tolerant Hamiltonicity of established by Hsieh and Cian (2010), but also extends their work by demonstrating the fault-tolerant bipancyclicity of $AQ_n$.

math.CO

From Virtual Games to Real-World Play

We introduce RealPlay, a neural network-based real-world game engine that enables interactive video generation from user control signals. Unlike prior works focused on game-style visuals, RealPlay aims to produce photorealistic, temporally consistent video sequences that resemble real-world footage. It operates in an interactive loop: users observe a generated scene, issue a control command, and receive a short video chunk in response. To enable such realistic and responsive generation, we address key challenges including iterative chunk-wise prediction for low-latency feedback, temporal consistency across iterations, and accurate control response. RealPlay is trained on a combination of labeled game data and unlabeled real-world videos, without requiring real-world action annotations. Notably, we observe two forms of generalization: (1) control transfer-RealPlay effectively maps control signals from virtual to real-world scenarios; and (2) entity transfer-although training labels originate solely from a car racing game, RealPlay generalizes to control diverse real-world entities, including bicycles and pedestrians, beyond vehicles. Project page can be found: https://wenqsun.github.io/RealPlay/

cs.CV

Out-of-Vocabulary Sampling Boosts Speculative Decoding

Speculative decoding relies on fast and accurate drafters. Recent state-of-the-art language models employ larger and larger vocabularies, which significantly slows down drafters. One promising approach to boost the efficiency of speculative decoding is to use drafters with smaller vocabularies. However, existing sampling methods cannot draw out-of-vocabulary tokens, creating a tradeoff between drafters' vocabulary size and acceptance rates. This paper introduces Redistributing Drafter Kernels (RDK), the first out-of-vocabulary sampler that effectively recovers acceptance rates by virtually restoring pruned target tokens. RDK leverages token-affinity priors to reallocate drafter mass towards high-overlap regions. We prove mathematically that RDK can achieve higher acceptance rates than vanilla and state-of-the-art samplers. We provide an efficient first-order approximation of RDK and prove that it reduces redistribution times from $O(N^2)$ to $O(N)$, enabling lightweight implementations for large vocabularies. Our experiments demonstrate that this linear-time RDK significantly boosts acceptance rates even after extreme pruning (removing more than 75% of the drafter's vocabulary), where existing samplers fail. RDK opens the door to extremely pruned drafters, which were previously impractical.

cs.LG