arXiv subjects

Hongye Gao

Publications and source records attributed to Hongye Gao.

3 recordsLinked to original sources

arXiv2026

Freestanding GdBa2Cu3O7 Thin Films via Optimized Buffer Layer Design: Preserving Superconducting Properties

Freestanding GdBa2Cu3O7 (GdBCO) superconducting thin films were fabricated using a water-soluble Sr3Al2O6 (SAO) sacrificial layer in combination with thermal release tape. An amorphous Al2O3 capping layer was introduced to suppress crack formation during the lift-off process. The influence of buffer-layer design inserted between the GdBCO and SAO layers was systematically investigated with respect to structural integrity and superconducting properties after lift-off. A LaAlO3/SrTiO3 bilayer buffer was found to be essential for maintaining epitaxial growth and a superconducting transition temperature (Tc) of approximately 92 K after lift-off, comparable to that of the as-grown films. In contrast, a reversed SrTiO3/LaAlO3 bilayer and single-layer buffer structures led to a suppression of Tc, highlighting the critical role of stacking sequence. These results demonstrate that optimization of the buffer-layer design is a key factor for realizing high-quality freestanding GdBCO films while maintaining their superconducting characteristics.

cond-mat.supr-con↗

arXiv2024

Structural analysis and transport properties of [010]-tilt grain boundaries in Fe(Se,Te)

Understanding the nature of grain boundaries is a prerequisite for fabricating high-performance superconducting bulks and wires. For iron-based superconductors [e.g. Ba(Fe,Co)$_2$As$_2$, Fe(Se,Te), and NdFeAs(O,F)], the dependence of the critical current density $J_\mathrm{c}$ on misorientation angle ($\theta_\mathrm{GB}$) has been explored on [001]-tilt grain boundaries, but no data for other types of orientations have been reported. Here, we report on the structural and transport properties of Fe(Se,Te) grown on CeO$_2$-buffered symmetric [010]-tilt roof-type SrTiO$_3$ bicrystal substrates by pulsed laser deposition. X-ray diffraction and transmission electron microscopy revealed that $\theta_\mathrm{GB}$ of Fe(Se,Te) was smaller whereas $\theta_\mathrm{GB}$ of CeO$_2$ was larger than that of the substrate. The difference in $\theta_\mathrm{GB}$ between the CeO$_2$ buffer layer and the substrate is getting larger with increasing $\theta_\mathrm{GB}$. For $\theta_\mathrm{GB}\geq24^\circ$ of the substrates, $\theta_\mathrm{GB}$ of Fe(Se,Te) was zero, whereas $\theta_\mathrm{GB}$ of CeO$_2$ was continuously increasing. The inclined growth of CeO$_2$ can be explained by the geometrical coherency model. The $c$-axis growth of Fe(Se,Te) for $\theta_\mathrm{GB}\geq24^\circ$ of the substrates is due to the domain matching epitaxy on (221) planes of CeO$_2$. Electrical transport measurements confirmed no reduction of inter-grain $J_\mathrm{c}$ for $\theta_\mathrm{GB}\leq9^\circ$, indicative of strong coupling between the grains.

cond-mat.supr-con↗

arXiv2021

Nanoscale Texture and Microstructure in NdFeAs(O,F)/IBAD-MgO Superconducting Thin Film with Superior Critical Current Properties

This paper reports the nanoscale texture and microstructure of a high-performance NdFeAs(O,F) superconducting thin film grown by molecular beam epitaxy on a textured MgO/Y$_2$O$_3$/Hastelloy substrate. The NdFeAs(O,F) film forms a highly textured columnar grain structure by epitaxial growth on the MgO template. Although the film contains stacking faults along the $ab$-plane as well as grain boundaries perpendicular to the $ab$-plane, good superconducting properties are measured: a critical temperature, $T _{\rm c}$, of 46 K and a self-field critical current density, $J_{\rm c}$, of $2 \times 10^6 \,{\rm A/cm^2}$ at 4.2 K. Automated crystal orientation mapping by scanning precession electron diffraction in transmission electron microscopy is employed to analyze the misorientation angles between adjacent grains in a large ensemble (247 grains). 99% of the grain boundaries show in-plane misorientation angles ($Δγ$) less than the critical angle $θ_{\rm c}$, which satisfies one of the necessary conditions for the high $J_{\rm c}$. Comparing the columnar grain size distribution with the mean distance of the flux line lattice, the triple junctions of low-angle grain boundaries are found to be effective pinning centers, even at high temperatures ($\ge$35 K) and/or low magnetic fields.

cond-mat.supr-con↗