SearcharxivSearch

arXiv subjects

Hosein Nikopour

Publications and source records attributed to Hosein Nikopour.

15 recordsLinked to original sources

Deep Reinforcement Learning-based Cell DTX/DRX Configuration for Network Energy Saving

3GPP Release 18 cell discontinuous transmission and reception (cell DTX/DRX) is an important new network energy saving feature for 5G. As a time-domain technique, it periodically aggregates the user data transmissions in a given duration of time when the traffic load is not heavy, so that the remaining time can be kept silent and advanced sleep modes (ASM) can be enabled to shut down more radio components and save more energy for the cell. However, inevitably the packet delay is increased, as during the silent period no transmission is allowed. In this paper we study how to configure cell DTX/DRX to optimally balance energy saving and packet delay, so that for delay-sensitive traffic maximum energy saving can be achieved while the degradation of quality of service (QoS) is minimized. As the optimal configuration can be different for different network and traffic conditions, the problem is complex and we resort to deep reinforcement learning (DRL) framework to train an AI agent to solve it. Through careful design of 1) the learning algorithm, which implements a deep Q-network (DQN) on a contextual bandit (CB) model, and 2) the reward function, which utilizes a smooth approximation of a theoretically optimal but discontinuous reward function, we are able to train an AI agent that always tries to select the best possible Cell DTX/DRX configuration under any network and traffic conditions. Simulation results show that compared to the case when cell DTX/DRX is not used, our agent can achieve up to ~45% energy saving depending on the traffic load scenario, while always maintaining no more than ~1% QoS degradation.

cs.NI

Graph Reinforcement Learning for QoS-Aware Load Balancing in Open Radio Access Networks

Next-generation wireless cellular networks are expected to provide unparalleled Quality-of-Service (QoS) for emerging wireless applications, necessitating strict performance guarantees, e.g., in terms of link-level data rates. A critical challenge in meeting these QoS requirements is the prevention of cell congestion, which involves balancing the load to ensure sufficient radio resources are available for each cell to serve its designated User Equipments (UEs). In this work, a novel QoS-aware Load Balancing (LB) approach is developed to optimize the performance of Guaranteed Bit Rate (GBR) and Best Effort (BE) traffic in a multi-band Open Radio Access Network (O-RAN) under QoS and resource constraints. The proposed solution builds on Graph Reinforcement Learning (GRL), a powerful framework at the intersection of Graph Neural Network (GNN) and RL. The QoS-aware LB is modeled as a Markov Decision Process, with states represented as graphs. QoS consideration are integrated into both state representations and reward signal design. The LB agent is then trained using an off-policy dueling Deep Q Network (DQN) that leverages a GNN-based architecture. This design ensures the LB policy is invariant to the ordering of nodes (UE or cell), flexible in handling various network sizes, and capable of accounting for spatial node dependencies in LB decisions. Performance of the GRL-based solution is compared with two baseline methods. Results show substantial performance gains, including a $53\%$ reduction in QoS violations and a fourfold increase in the 5th percentile rate for BE traffic.

cs.AI

Enhancing O-RAN Security: Evasion Attacks and Robust Defenses for Graph Reinforcement Learning-based Connection Management

Adversarial machine learning, focused on studying various attacks and defenses on machine learning (ML) models, is rapidly gaining importance as ML is increasingly being adopted for optimizing wireless systems such as Open Radio Access Networks (O-RAN). A comprehensive modeling of the security threats and the demonstration of adversarial attacks and defenses on practical AI based O-RAN systems is still in its nascent stages. We begin by conducting threat modeling to pinpoint attack surfaces in O-RAN using an ML-based Connection management application (xApp) as an example. The xApp uses a Graph Neural Network trained using Deep Reinforcement Learning and achieves on average 54% improvement in the coverage rate measured as the 5th percentile user data rates. We then formulate and demonstrate evasion attacks that degrade the coverage rates by as much as 50% through injecting bounded noise at different threat surfaces including the open wireless medium itself. Crucially, we also compare and contrast the effectiveness of such attacks on the ML-based xApp and a non-ML based heuristic. We finally develop and demonstrate robust training-based defenses against the challenging physical/jamming-based attacks and show a 15% improvement in the coverage rates when compared to employing no defense over a range of noise budgets

cs.CR

Achieving Low Latency at Low Outage: Multilevel Coding for mmWave Channels

Millimeter-wave (mmWave) spectrum is expected to support data-intensive applications that require ultra-reliable low-latency communications (URLLC). However, mmWave links are highly sensitive to blockage, which may lead to disruptions in the communication. Traditional techniques that build resilience against such blockages (among which are interleaving and feedback mechanisms) incur delays that are too large to effectively support URLLC. This calls for novel techniques that ensure resilient URLLC. In this paper, we propose to deploy multilevel codes over space and over time. These codes offer several benefits, such as they allow to control what information is received and they provide different reliability guarantees for different information streams based on their priority. We also show that deploying these codes leads to attractive trade-offs between rate, delay, and outage probability. A practically-relevant aspect of the proposed technique is that it offers resilience while incurring a low operational complexity.

cs.IT

Reliability-Optimized User Admission Control for URLLC Traffic: A Neural Contextual Bandit Approach

Ultra-reliable low-latency communication (URLLC) is the cornerstone for a broad range of emerging services in next-generation wireless networks. URLLC fundamentally relies on the network's ability to proactively determine whether sufficient resources are available to support the URLLC traffic, and thus, prevent so-called cell overloads. Nonetheless, achieving accurate quality-of-service (QoS) predictions for URLLC user equipment (UEs) and preventing cell overloads are very challenging tasks. This is due to dependency of the QoS metrics (latency and reliability) on traffic and channel statistics, users' mobility, and interdependent performance across UEs. In this paper, a new QoS-aware UE admission control approach is developed to proactively estimate QoS for URLLC UEs, prior to associating them with a cell, and accordingly, admit only a subset of UEs that do not lead to a cell overload. To this end, an optimization problem is formulated to find an efficient UE admission control policy, cognizant of UEs' QoS requirements and cell-level load dynamics. To solve this problem, a new machine learning based method is proposed that builds on (deep) neural contextual bandits, a suitable framework for dealing with nonlinear bandit problems. In fact, the UE admission controller is treated as a bandit agent that observes a set of network measurements (context) and makes admission control decisions based on context-dependent QoS (reward) predictions. The simulation results show that the proposed scheme can achieve near-optimal performance and yield substantial gains in terms of cell-level service reliability and efficient resource utilization.

cs.LG

Integrated Access and Backhaul in Millimeter-Wave Cellular: Benefits and Challenges

The recently proposed NR-ready integrated access and backhaul (IAB) architecture promises to bring a cost-efficient deployment solution for both coverage extension and capacity boosting in future 5G/5G+ systems. While its impact on the coverage extension was thoughtfully addressed in the literature, the effect of advanced functionalities such as multi-hop, multi-connectivity, and multi-beam operations on the throughput remains unclear. We review and characterize the system-level impact of these capabilities on the performance of self-backhauled IAB systems operating in half-duplex mode and utilizing millimeter-wave (mmWave) technology across both access and backhaul. Our results indicate that the throughput gain of multi-hopping and multi-beaming is significant even without multi-connectivity operation. Another important learning is that in all-mmWave systems with link blockage, multi-connectivity with link switching allows achieving self-load balancing. Finally, we outline future research directions.

cs.NI

6G: Connectivity in the Era of Distributed Intelligence

The confluence of 5G and AI is transforming wireless networks to deliver diverse services at the Edge, driving towards a vision of pervasive distributed intelligence. Future 6G networks will need to deliver quality of experience through seamless integration of communication, computation and AI. Therefore, networks must become intelligent, distributed, scalable, and programmable platforms across the continuum of data delivery to address the ever-increasing service requirements and deployment complexity. We present novel results across three research directions that are expected to be integral to 6G systems and also discuss newer 6G metrics.

cs.IT

Connection Management xAPP for O-RAN RIC: A Graph Neural Network and Reinforcement Learning Approach

Connection management is an important problem for any wireless network to ensure smooth and well-balanced operation throughout. Traditional methods for connection management (specifically user-cell association) consider sub-optimal and greedy solutions such as connection of each user to a cell with maximum receive power. However, network performance can be improved by leveraging machine learning (ML) and artificial intelligence (AI) based solutions. The next generation software defined 5G networks defined by the Open Radio Access Network (O-RAN) alliance facilitates the inclusion of ML/AI based solutions for various network problems. In this paper, we consider intelligent connection management based on the O-RAN network architecture to optimize user association and load balancing in the network. We formulate connection management as a combinatorial graph optimization problem. We propose a deep reinforcement learning (DRL) solution that uses the underlying graph to learn the weights of the graph neural networks (GNN) for optimal user-cell association. We consider three candidate objective functions: sum user throughput, cell coverage, and load balancing. Our results show up to 10% gain in throughput, 45-140% gain cell coverage, 20-45% gain in load balancing depending on network deployment configurations compared to baseline greedy techniques.

cs.IT

Resource Management in Wireless Networks via Multi-Agent Deep Reinforcement Learning

We propose a mechanism for distributed resource management and interference mitigation in wireless networks using multi-agent deep reinforcement learning (RL). We equip each transmitter in the network with a deep RL agent that receives delayed observations from its associated users, while also exchanging observations with its neighboring agents, and decides on which user to serve and what transmit power to use at each scheduling interval. Our proposed framework enables agents to make decisions simultaneously and in a distributed manner, unaware of the concurrent decisions of other agents. Moreover, our design of the agents' observation and action spaces is scalable, in the sense that an agent trained on a scenario with a specific number of transmitters and users can be applied to scenarios with different numbers of transmitters and/or users. Simulation results demonstrate the superiority of our proposed approach compared to decentralized baselines in terms of the tradeoff between average and $5^{th}$ percentile user rates, while achieving performance close to, and even in certain cases outperforming, that of a centralized information-theoretic baseline. We also show that our trained agents are robust and maintain their performance gains when experiencing mismatches between train and test deployments.

cs.LG

When Multiple Agents Learn to Schedule: A Distributed Radio Resource Management Framework

Interference among concurrent transmissions in a wireless network is a key factor limiting the system performance. One way to alleviate this problem is to manage the radio resources in order to maximize either the average or the worst-case performance. However, joint consideration of both metrics is often neglected as they are competing in nature. In this article, a mechanism for radio resource management using multi-agent deep reinforcement learning (RL) is proposed, which strikes the right trade-off between maximizing the average and the $5^{th}$ percentile user throughput. Each transmitter in the network is equipped with a deep RL agent, receiving partial observations from the network (e.g., channel quality, interference level, etc.) and deciding whether to be active or inactive at each scheduling interval for given radio resources, a process referred to as link scheduling. Based on the actions of all agents, the network emits a reward to the agents, indicating how good their joint decisions were. The proposed framework enables the agents to make decisions in a distributed manner, and the reward is designed in such a way that the agents strive to guarantee a minimum performance, leading to a fair resource allocation among all users across the network. Simulation results demonstrate the superiority of our approach compared to decentralized baselines in terms of average and $5^{th}$ percentile user throughput, while achieving performance close to that of a centralized exhaustive search approach. Moreover, the proposed framework is robust to mismatches between training and testing scenarios. In particular, it is shown that an agent trained on a network with low transmitter density maintains its performance and outperforms the baselines when deployed in a network with a higher transmitter density.

cs.LG

Massive Machine-type Communications in 5G: Physical and MAC-layer solutions

Machine-type communications (MTC) are expected to play an essential role within future 5G systems. In the FP7 project METIS, MTC has been further classified into "massive Machine-Type Communication" (mMTC) and "ultra-reliable Machine-Type Communication" (uMTC). While mMTC is about wireless connectivity to tens of billions of machine-type terminals, uMTC is about availability, low latency, and high reliability. The main challenge in mMTC is scalable and efficient connectivity for a massive number of devices sending very short packets, which is not done adequately in cellular systems designed for human-type communications. Furthermore, mMTC solutions need to enable wide area coverage and deep indoor penetration while having low cost and being energy efficient. In this article, we introduce the physical (PHY) and medium access control (MAC) layer solutions developed within METIS to address this challenge.

cs.IT

SCMA for Open-Loop Joint Transmission CoMP

Sparse Code Multiple Access (SCMA), a non-orthogonal multiple access scheme, has been introduced as a key 5G technology to improve spectral efficiency. In this work, we propose SCMA to enable open-loop coordinated multipoint (CoMP) joint transmission (JT). The scheme combines CoMP techniques with multi-user SCMA (MU-SCMA) in downlink. This scheme provides open-loop user multiplexing and JT in power and code domains, with robustness to mobility and low overhead of channel state information (CSI) acquisition. The combined scheme is called MU-SCMA-CoMP, in which SCMA layers and transmit power of multiple transmit points (TPs) are shared among multiple users while a user may receive multiple SCMA layers from multiple TPs within a CoMP cluster. The benefits of the proposed scheme includes: i) drastic overhead reduction of CSI acquisition, ii) significant increase in throughput and coverage, and iii) robustness to channel aging. Various algorithms of MU-SCMA-CoMP are presented, including the detection strategy, power sharing optimization, and scheduling. System level evaluation shows that the proposed schemes provide significant throughput and coverage gains over OFDMA for both pedestrian and vehicular users.

cs.IT

SCMA Codebook Design

Multicarrier CDMA is a multiple access scheme in which modulated QAM symbols are spread over OFDMA tones by using a generally complex spreading sequence. Effectively, a QAM symbol is repeated over multiple tones. Low density signature (LDS) is a version of CDMA with low density spreading sequences allowing us to take advantage of a near optimal message passing algorithm (MPA) receiver with practically feasible complexity. Sparse code multiple access (SCMA) is a multi-dimensional codebook-based non-orthogonal spreading technique. In SCMA, the procedure of bit to QAM symbol mapping and spreading are combined together and incoming bits are directly mapped to multi-dimensional codewords of SCMA codebook sets. Each layer has its dedicated codebook. Shaping gain of a multi-dimensional constellation is one of the main sources of the performance improvement in comparison to the simple repetition of QAM symbols in LDS. Meanwhile, like LDS, SCMA enjoys the low complexity reception techniques due to the sparsity of SCMA codewords. In this paper a systematic approach is proposed to design SCMA codebooks mainly based on the design principles of lattice constellations. Simulation results are presented to show the performance gain of SCMA compared to LDS and OFDMA.

cs.IT

Uplink Contention Based SCMA for 5G Radio Access

Fifth generation (5G) wireless networks are expected to support very diverse applications and terminals. Massive connectivity with a large number of devices is an important requirement for 5G networks. Current LTE system is not able to efficiently support massive connectivity, especially on the uplink (UL). Among the issues arise due to massive connectivity is the cost of signaling overhead and latency. In this paper, an uplink contention-based sparse code multiple access (SCMA) design is proposed as a solution. First, the system design aspects of the proposed multiple-access scheme are described. The SCMA parameters can be adjusted to provide different levels of overloading, thus suitable to meet the diverse traffic connectivity requirements. In addition, the system-level evaluations of a small packet application scenario are provided for contention-based UL SCMA. SCMA is compared to OFDMA in terms of connectivity and drop rate under a tight latency requirement. The simulation results demonstrate that contention-based SCMA can provide around 2.8 times gain over contention-based OFDMA in terms of supported active users. The uplink contention-based SCMA scheme can be a promising technology for 5G wireless networks for data transmission with low signaling overhead, low delay, and support of massive connectivity.

cs.IT

SCMA for Downlink Multiple Access of 5G Wireless Networks

Sparse code multiple access (SCMA) is a new frequency domain non-orthogonal multiple-access technique which can improve spectral efficiency of wireless radio access. With SCMA, different incoming data streams are directly mapped to codewords of different multi-dimensional cookbooks, where each codeword represents a spread transmission layer. Multiple SCMA layers share the same time-frequency resources of OFDMA. The sparsity of codewords makes the near-optimal detection feasible through iterative message passing algorithm (MPA). Such low complexity of multi-layer detection allows excessive codeword overloading in which the dimension of multiplexed layers exceeds the dimension of codewords. Optimization of overloading factor along with modulation-coding levels of layers provides a more flexible and efficient link-adaptation mechanism. On the other hand, the signal spreading feature of SCMA can improve link-adaptation as a result of less colored interference. In this paper a technique is developed to enable multi-user SCMA (MU-SCMA) for downlink wireless access. User pairing, power sharing, rate adjustment, and scheduling algorithms are designed to improve the downlink throughput of a heavily loaded network. The advantage of SCMA spreading for lightly loaded networks is also evaluated.

cs.IT