arXiv subjects

Hossein Kazemi

Publications and source records attributed to Hossein Kazemi.

12 recordsLinked to original sources

arXiv2026

Hybrid Time-Frequency Domain Frequency Offset Compensation Under GHz Doppler Shift for LEO Satellite-to-Ground Coherent Free-Space Optical Communication

Coherent free-space optical (FSO) communication is a promising solution for low Earth orbit (LEO) satellite downlink transmission. However, high orbital velocity introduces multi-GHz Doppler shifts that appear as a rapidly time-varying carrier frequency offset (CFO), which is a major challenge for conventional coherent optical receivers. Narrow-range digital loops cannot acquire the initial offset, while wide-range feedforward or optical domain solutions either leave large residual errors or impose substantial implementation cost. In this paper, a Doppler-aware hybrid time-frequency frequency offset compensation (HTF-FOC) receiver architecture is proposed for coherent LEO satellite-to-ground FSO links using a cumulative time-varying random process model for the dynamic Doppler-induced phase shift. The proposed receiver implements a hybrid acquisition and tracking procedure to acquire and compensate for multi-GHz Doppler variations, including 4th-power FFT-based coarse CFO acquisition, residual CFO handover verification, and low-complexity decision-directed (DD) frequency-locked loop (FLL) tracking. The phase-averaged pairwise error probability (PEP) and union-bound symbol error rate (SER) expressions are derived and verified using Monte Carlo simulations. The results demonstrate that the proposed HTF-FOC method tracks Doppler shifts beyond $\pm5$ GHz while keeping the residual CFO below $80$ MHz with a success rate of $100\%$ for typical LEO altitudes of $400{\!-\!}800$ km and orbital speeds of $7.3{\!-\!}7.9$ km/s.

eess.SP↗

arXiv2025

Achieving 70 Gb/s Over A VCSEL-Based Optical Wireless Link Using A Multi-Mode Fiber-Coupled Receiver

In this paper, we demonstrate a laser-based optical wireless communication (OWC) system employing a 940 nm single-mode (SM) vertical cavity surface emitting laser (VCSEL) and a multi-mode (MM) fiber-coupled receiver, achieving a record data rate beyond 70 Gb/s, while the optical transmit power is below 5 mW. The use of a high speed fiber-optic photoreceiver avoids limiting the communication bandwidth by the receiver, enabling ultra-high capacity and energy-efficient light fidelity (LiFi) links to unlock new applications. This work experimentally validates the feasibility of ultra-high speed indoor OWC systems using a single low-power and low-cost VCSEL for next-generation LiFi connectivity.

eess.SP↗

arXiv2025

Real-Time Transmission of Uncompressed High-Definition Video Via A VCSEL-Based Optical Wireless Link With Ultra-Low Latency

Real-time transmission of high-resolution video signals in an uncompressed and unencrypted format requires an ultra-reliable and low-latency communications (URLLC) medium with high bandwidth to maintain the quality of experience (QoE) for users. We put forward the design and experimental demonstration of a high-performance laser-based optical wireless communication (OWC) system that enables high-definition (HD) video transmission with submillisecond latencies. The serial digital interface (SDI) output of a camera is used to transmit the live video stream over an optical wireless link by directly modulating the SDI signal on the intensity of a 940 nm vertical cavity surface emitting laser (VCSEL). The proposed SDI over light fidelity (LiFi) system corroborates error-free transmission of full HD (FHD) and 4K ultra-high-definition (UHD) resolutions at data rates of 2.97 Gb/s and 5.94 Gb/s, respectively, with a measured end-to-end latency of under 35 ns. Since SDI standards support various video formats and VCSELs are high-bandwidth and low-power devices, this presents a scalable and inexpensive solution for wireless connectivity between professional broadcast equipment using off-the-shelf SDI components.

eess.SP↗

arXiv2025

Optical Wireless Communications: Enabling the Next Generation Network of Networks

Optical wireless communication (OWC) is a promising technology anticipated to play a key role in the next-generation network of networks, especially as a complementary technology to traditional radio frequency communications, for enhancing networking capabilities beyond conventional terrestrial networks. OWC is already a mature technology with diverse usage scenarios, and can enable integrated applications via wireless access and backhaul networks, dynamic drone and satellite networks, underwater networks, inter- and intra-system interconnecting networks, and vehicular communication networks. Furthermore, novel and emerging technological opportunities such as photovoltaic cells, orbital angular momentum-based modulation, optical reconfigurable intelligent surfaces, organic light-emitting and photo diodes, and recent advances in ultraviolet communications can help enhance future OWC capabilities even further. Moreover, OWC networks can also support value-added services such as enhanced positioning and gesture recognition. Hence, OWC provides unique functionalities that can play a crucial role in building convergent and resilient future network of networks alongside radio frequency and optical fiber technologies.

eess.SP↗

arXiv2025

A Novel Terabit Grid-of-Beam Optical Wireless Multi-User Access Network with Beam Clustering

In this paper, we put forward a proof of concept for sixth generation (6G) Terabit infrared (IR) laser-based indoor optical wireless networks. We propose a novel double-tier access point (AP) architecture based on an array of arrays of vertical cavity surface emitting lasers (VCSELs) to provide a seamless grid-of-beam coverage with multi-Gb/s per beam. We present systematic design and thorough analytical modeling of the AP architecture, which are then applied to downlink system modeling using non-imaging angle diversity receivers (ADRs). We propose static beam clustering with coordinated multi-beam joint transmission (CoMB-JT) for network interference management and devise various clustering strategies to address inter-beam interference (IBI) and inter-cluster interference (ICI). Non-orthogonal multiple access (NOMA) and orthogonal frequency division multiple access (OFDMA) schemes are also adopted to handle intra-cluster interference, and the resulting signal-to-interference-plus-noise ratio (SINR) and achievable data rate are derived. The network performance is studied in terms of spatial distributions and statistics of the downlink SINR and data rate through extensive computer simulations. The results demonstrate that data rates up to 15 Gb/s are achieved within the coverage area and a properly devised clustering strikes a balance between the sum rate and fairness depending on the number of users.

eess.SP↗

arXiv2025

A Comprehensive Comparison between Terahertz and Optical Wireless Communications

This paper presents a comprehensive quantitative comparison between Terahertz (THz) communication (TeraCom) and optical wireless communication (OWC) technologies, focusing on both indoor and outdoor environments. We propose a comparison method for TeraCom and vertical-cavity surface-emitting laser (VCSEL)-based OWC in indoor scenarios, incorporating misalignment effects by modeling the THz antenna radiation pattern within a multi-ray THz channel model and using a Gaussian beam model for VCSEL-based OWC. Unified beamwidth parameters allow for a detailed analysis of misalignment impact on both systems. Furthermore, we develop power consumption models for each technology, integrating key parameters such as THz phase noise, VCSEL non-linearities, and photodetector bandwidth-area tradeoffs. These models enable an in-depth analysis of energy efficiency in indoor environments, including multi-transmitter coverage scenarios. For outdoor scenarios, we summarize existing stochastic channel models addressing path loss, pointing errors, and small-scale fading for free space optics (FSO) and THz links. We then apply these models to unmanned aerial vehicle (UAV) applications to assess performance in dynamic conditions. Our results provide critical insights into the suitability of each technology for various deployment scenarios.

eess.SP↗

arXiv2022

Design and Optimisation of High-Speed Receivers for 6G Optical Wireless Networks

To achieve multi-Gb/s data rates in 6G optical wireless access networks based on narrow infrared (IR) laser beams, a high-speed receiver with two key specifications is needed: a sufficiently large aperture to collect the required optical power and a wide field of view (FOV) to avoid strict alignment issues. This paper puts forward the systematic design and optimisation of multi-tier non-imaging angle diversity receivers (ADRs) composed of compound parabolic concentrators (CPCs) coupled with photodiode (PD) arrays for laser-based optical wireless communication (OWC) links. Design tradeoffs include the gain-FOV tradeoff for each receiver element and the area-bandwidth tradeoff for each PD array. The rate maximisation is formulated as a non-convex optimisation problem under the constraints on the minimum required FOV and the overall ADR dimensions to find optimum configuration of the receiver bandwidth and FOV, and a low-complexity optimal solution is proposed. The ADR performance is studied using computer simulations and insightful design guidelines are provided through various numerical examples. An efficient technique is also proposed to reduce the ADR dimensions based on CPC length truncation. It is shown that a compact ADR with a height of $\leq0.5$ cm and an effective area of $\leq0.5$ cm$^2$ reaches a data rate of $12$ Gb/s with a half-angle FOV of $30^\circ$ over a $3$ m link distance.

cs.IT↗

arXiv2022

Terabit Indoor Laser-Based Wireless Communications: LiFi 2.0 for 6G

This paper provides a summary of available technologies required for implementing indoor laser-based wireless networks capable of achieving aggregate data-rates of terabits per second as widely accepted as a sixth generation (6G) key performance indicator. The main focus of this paper is on the technologies supporting the near infrared region of the optical spectrum. The main challenges in the design of the transmitter and receiver systems and communication/networking schemes are identified and new insights are provided. This paper also covers the previous and recent standards as well as industrial applications for optical wireless communications (OWC) and LiFi.

cs.IT↗

arXiv2022

High-Speed Imaging Receiver Design for 6G Optical Wireless Communications: A Rate-FOV Trade-Off

The design of a compact high-speed and wide field of view (FOV) receiver is challenging due to the presence of two well-known trade-offs. The first one is the area-bandwidth trade-off of photodetectors (PDs) and the second one is the gain-FOV trade-off due to the use of optics. The combined effects of these two trade-offs imply that the achievable data rate of an imaging optical receiver is limited by its FOV, i.e., a rate-FOV trade-off. To control the area-bandwidth trade-off, an array of small PDs can be used instead of a single PD. Moreover, in practice, a large-area lens is required to ensure sufficient power collection, which in turn limits the receiver FOV (i.e., gain-FOV trade-off). We propose an imaging receiver design in the form of an array of arrays. To achieve a reasonable receiver FOV, we use individual focusing lens for each PD array rather than a single collection lens for the whole receiver. The proposed array of arrays structure provides an effective method to control both gain-FOV trade-off (via an array of lenses) and area-bandwidth trade-off (via arrays of PDs). We first derive a tractable analytical model for the SNR of an array of PDs where the maximum ratio combining has been employed. Then, we extend the model for the proposed array of arrays structure and the accuracy of the analytical model is verified based on several Optic Studio-based simulations. Next, we formulate an optimization problem to maximize the achievable data rate of the imaging receiver subject to a minimum required FOV. The optimization problem is solved for two commonly used modulation techniques, namely, OOK and direct current biased optical orthogonal frequency division multiplexing with variable rate quadrature amplitude modulation. It is demonstrated that a data rate of ~ 24 Gbps with a FOV of 15 is achievable using OOK with a total receiver size of 2 cm by 2 cm.

cs.IT↗

arXiv2022

A Tb/s Indoor MIMO Optical Wireless Backhaul System Using VCSEL Arrays

In this paper, the design of a multiple-input multiple-output (MIMO) optical wireless communication (OWC) link based on vertical cavity surface emitting laser (VCSEL) arrays is systematically carried out with the aim to support data rates in excess of 1 Tb/s for the backhaul of sixth generation (6G) indoor wireless networks. The proposed design combines direct current optical orthogonal frequency division multiplexing (DCO-OFDM) and a spatial multiplexing MIMO architecture. For such an ultra-high-speed line-of-sight (LOS) OWC link with low divergence laser beams, maintaining alignment is of high importance. In this paper, two types of misalignment error between the transmitter and receiver are distinguished, namely, radial displacement error and orientation angle error, and they are thoroughly modeled in a unified analytical framework assuming Gaussian laser beams, resulting in a generalized misalignment model (GMM). The derived GMM is then extended to MIMO arrays and the performance of the MIMO-OFDM OWC system is analyzed in terms of the aggregate data rate. Novel insights are provided into the system performance based on computer simulations by studying various influential factors such as beam waist, array configuration and different misalignment errors, which can be used as guidelines for designing short range Tb/s MIMO OWC systems.

cs.IT↗

arXiv2021

Safety Analysis for Laser-based Optical Wireless Communications: A Tutorial

Light amplification by stimulated emission of radiation (laser) sources have many advantages for use in high data rate optical wireless communications. In particular, the low cost and high-bandwidth properties of laser sources such as vertical-cavity surface-emitting lasers (VCSELs) make them attractive for future indoor optical wireless communications. In order to be integrated into future indoor networks, such lasers should conform to eye safety regulations determined by the international electrotechnical commission (IEC) standards for laser safety. In this paper, we provide a detailed study of beam propagation to evaluate the received power of various laser sources, based on which as well as the maximum permissible exposure (MPE) defined by the IEC 60825-1:2014 standard, we establish a comprehensive framework for eye safety analyses. This framework allows us to calculate the maximum allowable transmit power, which is crucial in the design of a reliable and safe laser-based wireless communication system. Initially, we consider a single-mode Gaussian beam and calculate the maximum permissible transmit power. Subsequently, we generalize this approach for higher-mode beams. It is shown that the M-squared-based approach for analysis of multimode lasers ensures the IEC eye safety limits, however, in some scenarios, it can be too conservative compared to the precise beam decomposition method. Laser safety analyses with consideration of optical elements such as lens and diffuser, as well as for VCSEL array have been also presented. Skin safety, as another significant factor of laser safety, has also been investigated in this paper. We have studied the impacts of various parameters such as wavelength, exposure duration and the divergence angle of laser sources on the safety analysis by presenting insightful results.

cs.IT↗

arXiv2019

Multi-Hop Wireless Optical Backhauling for LiFi Attocell Networks: Bandwidth Scheduling and Power Control

The backhaul of hundreds of light fidelity (LiFi) base stations (BSs) constitutes a major challenge. Indoor wireless optical backhauling is a novel approach whereby the interconnections between adjacent LiFi BSs are provided by way of directed line-of-sight (LOS) wireless infrared (IR) links. Building on the aforesaid approach, this paper presents the top-down design of a multi-hop wireless backhaul configuration for multi-tier optical attocell networks by proposing the novel idea of super cells. Such cells incorporate multiple clusters of attocells that are connected to the core network via a single gateway based on multi-hop decode-and-forward (DF) relaying. Consequently, new challenges arise for managing the bandwidth and power resources of the bottleneck backhaul. By putting forward user-based bandwidth scheduling (UBS) and cell-based bandwidth scheduling (CBS) policies, the system-level modeling and analysis of the end-to-end multi-user sum rate is elaborated. In addition, optimal bandwidth scheduling under both UBS and CBS policies are formulated as constrained convex optimization problems, which are solved by using the projected subgradient method. Furthermore, the transmission power of the backhaul system is opportunistically reduced by way of an innovative fixed power control (FPC) strategy. The notion of backhaul bottleneck occurrence (BBO) is introduced. An accurate approximate expression of the probability of BBO is derived, and then verified using Monte Carlo simulations. Several insights are provided into the offered gains of the proposed schemes through extensive computer simulations, by studying different aspects of the performance of super cells including the average sum rate, the BBO probability and the backhaul power efficiency (PE).

cs.IT↗