arXiv subjects

Hoyeon Jeon

Publications and source records attributed to Hoyeon Jeon.

8 recordsLinked to original sources

arXiv2026

Deciphering Majorana Zero Modes in Topological Superconductor FeTe0.55Se0.45 with Machine-Learning-Assisted Spectral Deconvolution

Unambiguous identification of Majorana zero modes (MZMs) in topological superconductors (TSCs) remains a challenge due to complex in-gap states that can also produce zero-bias conductance peaks (ZBPs). Here we demonstrate a data-driven workflow that integrates pixel-wise spectral deconvolution with machine-learning (ML) to analyze tunneling spectroscopy from FeTe0.55Se0.45, an intrinsic TSC. Based on the local density of states (LDOS) spectra acquired with a millikelvin scanning tunneling microscope under magnetic fields, each spectrum was decomposed into multiple Lorentzian peaks. The extracted peak parameters were assembled into a structured feature set and subsequently embedded and clustered with unsupervised ML algorithms. ML-based clustering identified distinct classes of LDOS spectra, separating superconductor vortices exhibiting ZBPs consistent with established characteristics of MZMs from vortices displaying ZBP-mimicking features of trivial origin. Furthermore, spatially resolved ZBP distributions differentiate isotropic vortex cores with well-defined ZBPs from vortices that exhibit locally distorted ZBPs. By comparing the ZBP distributions to defect locations measured without magnetic field, we found a correlation between local heterogeneity and the ZBP formation, necessitating the systematic, data-driven analysis to disentangle genuine MZM signatures in TSC. This objective and reproducible workflow advances reliable MZM detection in TSCs, providing a foundation for MZM manipulation towards quantum computation.

cond-mat.supr-con↗

arXiv2025

Nanoscale Modulation of Flat Bands via Controllable Charge-Density-Waves Defects in 4Hb-TaS2

Electron correlation is a main driver of exotic quantum phases and their interplay. The 4Hb-TaS2 system, possessing intrinsic heterostructure of 1T- and 1H-TaS2 monolayers, offers a unique opportunity to control electron correlation by distorting the atomic lattice or tuning interlayer coupling. Here, we investigated intrinsically deformed charge-density-waves (CDW) in the 1T layer of 4Hb-TaS2 to elucidate and control their effects on flat bands using scanning tunneling microscopy and spectroscopy (STM/S) combined with first-principles calculations. We identified two types of CDW defects: Type 1 has structural distortion and locally suppressed flat bands, while Type 2 features an increased flat band filling factor of intact CDW structure. Density functional theory calculations indicate that a sulfur vacancy in the 1T layer distorts the CDW structure and gives rise to a Type 1, whereas a sulfur vacancy in the 1H layer reduces the interlayer charge transfer and lead to a Type 2. Furthermore, we demonstrated creating and erasing individual CDW defects via STM manipulation. Our findings provide a pathway to not only tune flat bands but also selectively manipulate the interaction between CDW, the atomic lattice, and interlayer coupling in strongly correlated systems with atomic precision.

cond-mat.str-el↗

arXiv2025

Coexistence of superconductivity and topological band in a van der Waals Sn1-xInxBi2Te4 crystal

The realization of topological surface states and superconductivity within a single material platform is a crucial step toward achieving topologically nontrivial superconductivity. This can be achieved at an interface between a superconductor and a topological insulator, or within a single material that intrinsically hosts both superconductivity and topological surface states. Here we use scanning tunneling microscopy to study Sn1-xInxBi2Te4 crystals. Spectroscopic evidence reveals the coexistence of topological surface states and superconductivity on the same surface of the crystals. The Te-terminated surface exhibits a single U-shaped superconducting gap with a size of up to 311 {\mu}eV, alongside Dirac bands outside the gap. Analysis of the vortex structure and differential conductance suggests weak-coupling s-wave superconductivity. The absence of observed zero modes suggests that shifting the Fermi level closer to the Dirac point of the topological bands is necessary to realize a topological superconducting state.

cond-mat.supr-con↗

arXiv2024

Shear-resistant topology in quasi one-dimensional van der Waals material Bi$_4$Br$_4$

Bi$_4$Br$_4$ is a prototypical quasi one-dimensional (1D) material in which covalently bonded bismuth bromide chains are arranged in parallel, side-by-side and layer-by-layer, with van der Waals (vdW) gaps in between. So far, two different structures have been reported for this compound, $\alpha$-Bi$_4$Br$_4$ and $\beta$-Bi$_4$Br$_4$ , in both of which neighboring chains are shifted by $\mathbf{b}/2$, i.e., half a unit cell vector in the plane, but which differ in their vertical stacking. While the different layer arrangements are known to result in distinct electronic properties, the effect of possible in-plane shifts between the atomic chains remains an open question. Here, using scanning tunneling microscopy and spectroscopy (STM/STS), we report a new Bi$_4$Br$_4$(001) structure, with a shift of $\mathbf{b}/3$ between neighboring chains in the plane and AB layer stacking. We determine shear strain to be the origin of this new structure, which can readily result in shifts of neighboring atomic chains because of the weak inter-chain bonding. For the observed $b/3$ structure, the (residual) atomic chain shift corresponds to an in-plane shear strain of $\gamma\approx7.5\%$. STS reveals a bulk insulating gap and metallic edge states at surface steps, indicating that the new structure is also a higher-order topological insulator, just like $\alpha$-Bi$_4$Br$_4$, in agreement with density functional theory (DFT) calculations.

cond-mat.mes-hall↗

arXiv2023

Observation of 2D Weyl Fermion States in Epitaxial Bismuthene

A two-dimensional (2D) Weyl semimetal featuring a spin-polarized linear band dispersion and a nodal Fermi surface is a new topological phase of matter. It is a solid-state realization of Weyl fermions in an intrinsic 2D system. The nontrivial topology of 2D Weyl cones guarantees the existence of a new form of topologically protected boundary states, Fermi string edge states. In this work, we report the realization of a 2D Weyl semimetal in monolayer-thick epitaxial bismuthene grown on SnS(Se) substrate. The intrinsic band gap of bismuthene is eliminated by the space-inversion-symmetry-breaking substrate perturbations, resulting in a gapless spin-polarized Weyl band dispersion. The linear dispersion and spin polarization of the Weyl fermion states are observed in our spin and angle-resolved photoemission measurements. In addition, the scanning tunneling microscopy/spectroscopy reveals a pronounced local density of states at the edge, suggesting the existence of Fermi string edge states. These results open the door for the experimental exploration of the exotic properties of Weyl fermion states in reduced dimensions.

cond-mat.mtrl-sci↗

arXiv2023

Emergence of a new band and the Lifshitz transition in kagome metal ScV$_6$Sn$_6$ with charge density wave

Topological kagome systems have been a topic of great interest in condensed matter physics due totheir unique electronic properties. The vanadium-based kagome materials are particularly intrigu-ing since they exhibit exotic phenomena such as charge density wave (CDW) and unconventionalsuperconductivity. The origin of these electronic instabilities is not fully understood, and the re-cent discovery of a charge density wave in ScV6Sn6provides a new avenue for investigation. In thiswork, we investigate the electronic structure of the novel kagome metal ScV6Sn6using angle resolvedphotoemission spectroscopy (ARPES), scanning tunneling microscopy (STM), and first-principlesdensity functional theory calculations. Our analysis reveals for the first time the temperature-dependent band changes of ScV6Sn6and identifies a new band that exhibits a strong signatureof a structure with CDW below the critical temperature. Further analysis revealed that this newband is due to the surface kagome layer of the CDW structure. In addition, a Lifshitz transition isidentified in the ARPES spectra that is related to the saddle point moving across the Fermi levelat the critical temperature for the CDW formation. This result shows the CDW behavior may alsobe related to nesting of the saddle point, similar to related materials. However, no energy gap is observed at the Fermi level and thus the CDW is not a typical Fermi surface nesting scenario. These results provide new insights into the underlying physics of the CDW in the kagome materials and could have implications for the development of materials with new functionality.

cond-mat.str-el↗

arXiv2023

Interplay between Topological States and Rashba States as Manifested on Surface Steps at Room Temperature

The unique spin texture of quantum states in topological materials underpins many proposed spintronic applications. However, realizations of such great potential are stymied by perturbations, such as temperature and local fields imposed by impurities and defects, that can render a promising quantum state uncontrollable. Here, we report room-temperature observation of interaction between Rashba states and topological surface states, which manifests unique spin textures controllable by layer thickness of thin films. Specifically, we combine scanning tunneling microscopy/spectroscopy with the first-principles theoretical calculation to find the robust Rashba states coexisting with topological surface states along the surface steps with characteristic spin textures in momentum space. The Rashba edge states can be switched off by reducing the thickness of a topological insulator Bi2Se3 to bolster their interaction with the hybridized topological surface states. The study unveils a manipulating mechanism of the spin textures at room temperature, reinforcing the necessity of thin film technology in controlling quantum states.

cond-mat.mes-hall↗

arXiv2018

Selective resolution of phonon modes in STM-IETS on clean and oxygen-adsorbed Cu(100) surfaces

The observation of surface phonon dispersion using local probes can provide important information related to local structural and thermal properties. In this study, surface phonon modes on a Cu(100) surface were measured using the inelastic tunneling spectroscopy of scanning tunneling microscopy (STM-IETS) with atomically sharp tips. Different phonon modes were selectively measured depending on the structures of the probing tips or the surfaces. Two different surface phonon modes, at 19.0 meV on a clean Cu(100) surface and at 13.5 meV on an oxygen-adsorbed Cu(100) surface, are explained by the selection rules. Additionally, the spatial variation in STM-IETS showed surface stress relaxation.

cond-mat.mes-hall↗