arXiv subjects

Huairuo Zhang

Publications and source records attributed to Huairuo Zhang.

17 recordsLinked to original sources

arXiv2026

Nontrivial Boundary-Mediated Superconducting Transport in a TRSB Topological Iron-Based Superconductor

The interplay of superconductivity, band topology, and spontaneous time-reversal-symmetry breaking (TRSB) is expected to enable topological superconducting boundary states. FeTe0.55Se0.45 provides a promising single-material platform because it combines superconductivity, nontrivial band topology, and spontaneous magnetization in the superconducting state. Here we report evidence for a boundary-mediated superconducting transport response in exfoliated Fe(Te,Se) devices. Polar Kerr measurements show that TRSB emerges below TKerr < Tc and coexists with superconductivity across multiple compositions, providing an independent symmetry-breaking scale for transport. Using crystallographically sharp, continuous edges and side-surface-dominant contacts, we find that topological FeTe0.55Se0.45 exhibits an anomalous conductance plateau absent in topologically trivial FeTe0.40Se0.60 and Fe1.02Te0.55Se0.45 under comparable measurements. This plateau requires uninterrupted sharp edges connecting source and drain, persists over micrometer-scale separations far exceeding the bulk coherence length, shows strongly suppressed thermal broadening, and collapses when the drain is moved to the top surface. Its temperature evolution follows the TRSB scale: the plateau remains weakly broadened below T*Kerr and disappears near TKerr rather than Tc. These doping-selective, edge-geometry-dependent, TRSB-correlated, and long-range nonlocal signatures establish experimental criteria for identifying boundary-mediated superconducting transport in FeTe0.55Se0.45 and motivate phase-sensitive and theoretical studies of its microscopic origin.

cond-mat.supr-con↗

arXiv2026

Understanding Optical Anisotropy in Multilayer γ-InSe and ε-GaSe

Low-dimensional media have exhibited optical anisotropy that is unachievable in traditional 3D media due to the asymmetry of their strong, in-plane covalent bonds and weak out-of-plane van der Waals interactions. As a result, 2D media are promising building blocks for ultrathin devices such as polarimeters, polarized light sources, and active polarizers. III-VI semiconductors possess a rare property in the class of multilayered semiconductors, which is that their fundamental excitons are oriented out-of-plane. This allows them to exhibit phenomena such as transparency in the visible range while also being emissive in the visible and near-infrared ranges. Here, we report the first experimental values for the anisotropic refractive indices of γ-InSe and ε-GaSe, and we observe the effects of the out-of-plane excitons on the c-axis refractive index. It is found that both materials exhibit moderate optical anisotropy for multilayered semiconductors. The complex, anisotropic refractive index of γ-InSe and ε-GaSe enables the accurate simulation of these media, allowing for the design of high-performance, ultra-compact optoelectronic devices.

physics.optics↗

arXiv2025

Weyl-Superconductivity revealed by Edge Mode mediated Nonlocal Transport

Topological superconductivity (TSC) hosts exotic modes enabling error-free quantum computation and low-temperature spintronics. Despite preliminary evidence of edge modes, unambiguous signatures remain undetected. Here, we report the first observation of protected, non-local transport from the edge modes of the potential Weyl-superconductor \ch{FeTe_{0.55}Se_{0.45}}. Namely resonant charge injection, ballistic transport, and extraction via edge modes. An anomalous conductance plateau emerges only when topological, superconducting, and magnetic phases coexist, with source-drain contacts coupled via the edge. Moving the drain to the bulk switches the non-local transport process to a local Andreev process, generating a zero-bias conductance peak (ZBCP). The edge mode's topological protection is confirmed by its insensitivity to external magnetic fields and increasing temperatures until the spontaneous magnetization is substantially suppressed. Our findings provide a new methodology to demonstrate TSC edge states in \ch{FeTe_{0.55}Se_{0.45}} via topologically protected non-local transport.

cond-mat.supr-con↗

arXiv2024

Giant Hall Switching by Surface-State-Mediated Spin-Orbit Torque in a Hard Ferromagnetic Topological Insulator

Topological insulators (TI) and magnetic topological insulators (MTI) can apply highly efficient spin-orbit torque (SOT) and manipulate the magnetization with their unique topological surface states with ultra-high efficiency. Here, we demonstrate efficient SOT switching of a hard MTI, V-doped (Bi,Sb)2Te3 (VBST) with a large coercive field that can prevent the influence of an external magnetic field. A giant switched anomalous Hall resistance of 9.2 $kΩ$ is realized, among the largest of all SOT systems, which makes the Hall channel a good readout and eliminates the need to fabricate complicated magnetic tunnel junction (MTJ) structures. The SOT switching current density can be reduced to $2.8\times10^5 A/cm^2$. Moreover, as the Fermi level is moved away from the Dirac point by both gate and composition tuning, VBST exhibits a transition from edge-state-mediated to surface-state-mediated transport, thus enhancing the SOT effective field to $1.56\pm 0.12 T/ (10^6 A/cm^2)$ and the interfacial charge-to-spin conversion efficiency to $3.9\pm 0.3 nm^{-1}$. The findings establish VBST as an extraordinary candidate for energy-efficient magnetic memory devices.

cond-mat.mes-hall↗

arXiv2024

Broadband Light Harvesting from Scalable Two-Dimensional Semiconductor Heterostructures

Broadband absorption in the visible spectrum is essential in optoelectronic applications that involve power conversion such as photovoltaics and photocatalysis. Most ultrathin broadband absorbers use parasitic plasmonic structures that maximize absorption using surface plasmons and/or Fabry-Perot cavities, which limits the weight efficiency of the device. Here, we show the theoretical and experimental realization of an unpatterned/planar semiconductor thin-film absorber based on monolayer transition metal dichalcogenides (TMDCs). We experimentally demonstrate an average total absorption in the visible range (450 nm - 700 nm) of > 70% using > 4 nm of semiconductor absorbing materials scalable over large areas with vapor phase growth techniques. Our analysis suggests that a power conversion efficiency (PCE) of 15.54% and a specific power > 300 W g^-1 may be achieved in a photovoltaic cell based on this metamaterial absorber.

physics.optics↗

arXiv2024

Single-Phase L1$_{0}$-Ordered High Entropy Thin Films with High Magnetic Anisotropy

The vast high entropy alloy (HEA) composition space is promising for discovery of new material phases with unique properties. We explore the potential to achieve rare-earth-free high magnetic anisotropy materials in single-phase HEA thin films. Thin films of FeCoNiMnCu sputtered on thermally oxidized Si/SiO$_{2}$ substrates at room temperature are magnetically soft, with a coercivity on the order of 10 Oe. After post-deposition rapid thermal annealing (RTA), the films exhibit a single face-centered-cubic phase, with an almost 40-fold increase in coercivity. Inclusion of 50 at.% Pt in the film leads to ordering of a single L1$_{0}$ high entropy intermetallic phase after RTA, along with high magnetic anisotropy and 3 orders of magnitude coercivity increase. These results demonstrate a promising HEA approach to achieve high magnetic anisotropy materials using RTA.

cond-mat.mtrl-sci↗

arXiv2023

Phonon States in NbTe$_4$ and TaTe$_4$ Quasi-One-Dimensional van der Waals Crystals

We report the results of polarization-dependent Raman spectroscopy of phonon states in single-crystalline quasi-one-dimensional NbTe$_4$ and TaTe$_4$ van der Waals materials. The measurements were conducted in the wide temperature range from 80 K to 560 K. Our results show that although both materials have identical crystal structures and symmetries, there is a drastic difference in the intensity of their Raman spectra. While TaTe4 exhibits well-defined peaks through the examined frequency and temperature ranges, NbTe4 reveals extremely weak Raman signatures. The measured spectral positions of the phonon peaks agree with the phonon band structure calculated using the density-functional theory. We offer possible reasons for the in-tensity differences between the two van der Waals materials. Our results provide insights into the phonon properties of NbTe$_4$ and TaTe$_4$ van der Waals materials and indicate the potential of Raman spectroscopy for studying charge-density-wave quantum condensate phases.

cond-mat.mtrl-sci↗

arXiv2023

Concurrent Ferromagnetism and Superconductivity in Fe(Te,Se) van der Waals Josephson Junctions

Ferromagnetism and superconductivity are two key ingredients to create non-Abelian quasiparticle excitations that are expected as building blocks to construct topological quantum computers. Adversely, ferromagnetism and superconductivity are typically also two hostile orderings competing to align spins in different configurations, making the material design and experimental implementation extremely challenging. Recently, iron-based superconductor Fe(Te,Se) has emerged as a connate topological superconductor (TSC), which differentiates itself from other hybrid TSCs by self-proximitizing its Dirac surface states with bulk superconductivity. So far, the efforts to search for Majorana states in this material are prevalently focused on spectroscopy techniques. In this paper, we present the global transport signature of interfacial magnetism coexisting with superconductivity. Time-reversal symmetry breaking superconducting states are confirmed through device level transport measurements for the first time in a van der Waals (vdW) Josephson junction structure. Magnetic hysteresis is observed in this device scheme, which only appears below the superconducting critical temperature, leading to potential Fulde-Ferrell (FF) superconducting pairing mechanisms. The 0-π phase mixing in the Fraunhofer patterns pinpoints the ferromagnetic state dwelling on the surface. Furthermore, a stochastic field-free superconducting diode effect also confirms the spontaneous time-reversal symmetry breaking which reflects the behavior of the ferromagnetism. Our work paves a new way to explore topological superconductivity in iron-based superconductors for future high Tc fault-tolerant qubit implementations from a device perspective.

cond-mat.supr-con↗

arXiv2023

Nitrogen-Based Magneto-Ionic Manipulation of Exchange Bias in CoFe/MnN Heterostructures

Electric field control of the exchange bias effect across ferromagnet/antiferromagnet (FM/AF) interfaces has offered exciting potentials for low-energy-dissipation spintronics. In particular, the solid state magneto-ionic means is highly appealing as it may allow reconfigurable electronics by transforming the all-important FM/AF interfaces through ionic migration. In this work, we demonstrate an approach that combines the chemically induced magneto-ionic effect with the electric field driving of nitrogen in the Ta/Co$_{0.7}$Fe$_{0.3}$/MnN/Ta structure to electrically manipulate exchange bias. Upon field-cooling the heterostructure, ionic diffusion of nitrogen from MnN into the Ta layers occurs. A significant exchange bias of 618 Oe at 300 K and 1484 Oe at 10 K is observed, which can be further enhanced after a voltage conditioning by 5% and 19%, respectively. This enhancement can be reversed by voltage conditioning with an opposite polarity. Nitrogen migration within the MnN layer and into the Ta capping layer cause the enhancement in exchange bias, which is observed in polarized neutron reflectometry studies. These results demonstrate an effective nitrogen-ion based magneto-ionic manipulation of exchange bias in solid-state devices.

physics.app-ph↗

arXiv2022

Specifics of the Elemental Excitations in "True One-Dimensional" MoI$_3$ van der Waals Nanowires

We report on the temperature evolution of the polarization-dependent Raman spectrum of exfoliated MoI$_3$, a van der Waals material with a "true one-dimensional" crystal structure that can be exfoliated to individual atomic chains. The temperature evolution of several Raman features reveals anomalous behavior suggesting a phase transition of a magnetic origin. Theoretical considerations indicate that MoI$_3$ is an easy-plane antiferromagnet with alternating spins along the dimerized chains and with inter-chain helical spin ordering. The calculated frequencies of the phonons and magnons are consistent with the interpretation of the experimental Raman data. The obtained results shed light on the specifics of the phononic and magnonic states in MoI$_3$ and provide a strong motivation for future study of this unique material with potential for spintronic device applications.

cond-mat.mes-hall↗

arXiv2022

Asymmetrical contact scaling and measurements in MoS2 FETs

Two-dimensional (2D) materials have great potential for use in future electronics due to their atomically thin nature which withstands short channel effects and thus enables better scalability. Device scaling is the process of reducing all device dimensions to achieve higher device density in a certain chip area. For 2D materials-based transistors, both the channel and contact scalability must be investigated. The channel scalability of 2D materials has been thoroughly investigated, confirming their resilience to short-channel effects. However, systematic studies on contact scalability remain rare and the current understanding of contact scaling in 2D FET is inconsistent and oversimplified. Here we combine physically scaled contacts and asymmetrical contact measurements to investigate the contact scaling behavior in 2D field-effect transistors (FETs). The asymmetrical contact measurements directly compare electron injection with different contact lengths while using the exact same channel, eliminating channel-to-channel variations. Compared to devices with long contact lengths, devices with short contact lengths (scaled contacts) exhibit larger variation, smaller drain currents at high drain-source voltages, and a higher chance of showing early saturation and negative differential resistance. Quantum transport simulations show that the transfer length of Ni-MoS2 contacts can be as short as 5 nm. Our results suggest that charge injection at the source contact is different from injection at the drain side: scaled source contacts can limit the drain current, whereas scaled drain contacts cannot. Furthermore, we clearly identified that the transfer length depends on the quality of the metal-2D interface. The asymmetrical contact measurements proposed here will enable further understanding of contact scaling behavior at various interfaces.

cond-mat.mtrl-sci↗

arXiv2022

Bi2Se3 Growth on (001) GaAs Substrates for Terahertz Integrated Systems

Terahertz (THz) technologies have been of interest for many years due to the variety of applications including gas sensing, nonionizing imaging of biological systems, security and defense, etc. To date, scientists have used different classes of materials to perform different THz functions. However, to assemble an on-chip THz integrated system, we must understand how to integrate these different materials. Here, we explore the growth of Bi2Se3, a topological insulator (TI) material that could serve as a plasmonic waveguide in THz integrated devices, on technologically-important GaAs (001) substrates. We explore surface treatments and find that atomically smooth GaAs surface is critical to achieving high-quality Bi2Se3 films despite the relatively weak film/substrate interaction. Calculations indicate that the Bi2Se3/GaAs interface is likely selenium-terminated and shows no evidence of chemical bonding between the Bi2Se3 and the substrate. These results are a guide for integrating van der Waals materials with conventional semiconductor substrates and serve as the first steps toward achieving an on-chip THz integrated system.

cond-mat.mtrl-sci↗

arXiv2022

CoTe2: A quantum critical Dirac metal with strong spin fluctuations

Quantum critical points separating weak ferromagnetic and paramagnetic phases trigger many novel phenomena. Dynamical spin fluctuations not only suppress the long-range order, but can also lead to unusual transport and even superconductivity. Combining quantum criticality with topological electronic properties presents a rare and unique opportunity. Here, by means of ab initio calculations and magnetic, thermal, and transport measurements, we show that the orthorhombic CoTe$_2$ is close to ferromagnetism, which appears suppressed by spin fluctuations. Calculations and transport measurements reveal nodal Dirac lines, making it a rare combination of proximity to quantum criticality and Dirac topology.

cond-mat.str-el↗

arXiv2022

Distinguishing two-component anomalous Hall effect from topological Hall effect

In transport, the topological Hall effect (THE) presents itself as non-monotonic features (or humps and dips) in the Hall signal and is widely interpreted as a sign of chiral spin textures, like magnetic skyrmions. However, when anomalous Hall effect (AHE) is also present, the co-existence of two AHEs could give rise to similar artifacts, making it difficult to distinguish between genuine THE with AHE and two-component AHE. Here we confirm genuine THE with AHE by means of transport and magneto-optical Kerr effect (MOKE) microscopy, in which magnetic skyrmions are directly observed, and find that genuine THE occurs in the transition region of the AHE. In sharp contrast, the artifact "THE", or two-component AHE occurs well beyond the saturation of the "AHE component" (under the false assumption of THE+AHE). Furthermore, we distinguish artifact "THE" from genuine THE by three methods: 1. Minor loops, 2. Temperature dependence, 3. Gate dependence. Minor loops of genuine THE with AHE are always within the full loop, while minor loops of the artifact "THE" may reveal a single loop that cannot fit into the "AHE component". Besides, the temperature or gate dependence of the artifact "THE" may also be accompanied by a polarity change of the "AHE component", as the non-monotonic features vanish, while the temperature dependence of genuine THE with AHE reveals no such change. Our work may help future researchers to exercise cautions and use these methods to examine carefully in order to ascertain genuine THE.

cond-mat.mtrl-sci↗

arXiv2021

2D Metal Selenide-Silicon Steep Sub-Threshold Heterojunction Triodes with High On-Current Density

Low power consumption in both static and dynamic modes of operation is a key requirement in modern, highly scaled nanoelectronics. Tunneling field-effect transistors (TFETs) that exploit direct band-to-band tunneling of charges and exhibit steep sub-threshold slope (SS) transfer characteristics are an attractive option in this regard. However, current generation of Si and III-V heterojunction based TFETs while suffer from low ON current density and ON/OFF current ratios for < 60 mV/dec operation. Semiconducting two-dimensional (2D) layers have recently renewed enthusiasm in novel device design for TFETs not only because of their atomically-thin bodies that favor superior electrostatic control but the same feature also favors higher ON current density and consequently high ON/OFF ratio. Here, we demonstrate gate-tunable heterojunction diodes (triodes) fabricated from InSe/Si 2D/3D van der Waals heterostructures, with a minimum subthreshold swing (SS) as low as 6.4 mV/dec and an SS average of 30 mV/dec over 4 decades of current. Further, the devices show a large current on/off ratio of approximately 10^6 and on-state current density of 0.3 uA/um at a drain bias of -1V. Our work opens new avenues for 2D semiconductors for 3D hetero-integration with Si to achieve ultra-low power logic devices.

physics.app-ph↗

arXiv2020

On-the-fly Closed-loop Autonomous Materials Discovery via Bayesian Active Learning

Active learning - the field of machine learning (ML) dedicated to optimal experiment design, has played a part in science as far back as the 18th century when Laplace used it to guide his discovery of celestial mechanics [1]. In this work we focus a closed-loop, active learning-driven autonomous system on another major challenge, the discovery of advanced materials against the exceedingly complex synthesis-processes-structure-property landscape. We demonstrate autonomous research methodology (i.e. autonomous hypothesis definition and evaluation) that can place complex, advanced materials in reach, allowing scientists to fail smarter, learn faster, and spend less resources in their studies, while simultaneously improving trust in scientific results and machine learning tools. Additionally, this robot science enables science-over-the-network, reducing the economic impact of scientists being physically separated from their labs. We used the real-time closed-loop, autonomous system for materials exploration and optimization (CAMEO) at the synchrotron beamline to accelerate the fundamentally interconnected tasks of rapid phase mapping and property optimization, with each cycle taking seconds to minutes, resulting in the discovery of a novel epitaxial nanocomposite phase-change memory material.

cond-mat.mtrl-sci↗

arXiv2017

Electric field induced semiconductor-to-metal phase transition in vertical MoTe2 and Mo1-xWxTe2 devices

Over the past years, transition metal dichalcogenides (TMDs) have attracted attention as potential building blocks for various electronic applications due to their atomically thin nature. An exciting development is the recent success in 'engineering' crystal phases of TMD compounds during the growth due to their polymorphic character. Here, we report an electric field induced reversible engineered phase transition in vertical 2H-MoTe2 devices, a crucial experimental finding that enables electrical phase switching for these ultra-thin layered materials. Scanning tunneling microscopy (STM) was utilized to analyze the TMD crystalline structure after applying an electric field, and scanning tunneling spectroscopy (STS) was employed to map a semiconductor-to-metal phase transition on the nanoscale. In addition, direct confirmation of a phase transition from 2H semiconductor to a distorted 2H' metallic phase was obtained by scanning transmission electron microscopy (STEM). MoTe2 and Mo1-xWxTe2 alloy based vertical resistive random access memory (RRAM) cells were fabricated to demonstrate clear reproducible and controlled switching with programming voltages that are tunable by the layer thickness and that show a distinctly different trend for the binary compound if compared to the ternary materials.

cond-mat.mes-hall↗