SearcharxivSearch

arXiv subjects

Huaiwen Yang

Publications and source records attributed to Huaiwen Yang.

5 recordsLinked to original sources

Light-Induced Giant Enhancement of the Nonlinear Hall Effect in Two-Dimensional Electron Gases at KTaO3 (111) Interfaces

The nonlinear Hall effect (NLHE), an emergent phenomenon in noncentrosymmetric systems, enables the generation of a transverse voltage without an external magnetic field through a second-order electrical response. However, achieving a sizable NLHE signal remains a critical challenge for its application in frequency-doubling and rectifying devices. Here, we report a light-induced giant enhancement of the NLHE in the two-dimensional electron gas (2DEG) at the CaZrO3/KTaO3 (111) interface. Under light illumination, the second harmonic Hall voltage (V2ω y) increases substantially and undergoes a sign reversal. Correspondingly,the second-order transverse conductivity increases by nearly five orders of magnitude, reaching 2.4 um V-1 omega-1, while also reversing its sign. Scaling analysis indicates that skew scattering is the dominant mechanism underlying the NLHE and is highly tunable via optical gating. Photoexcitation pumps electrons from in-gap states into the higher-lying Ta 5d conduction band, generating high-mobility photocarriers that significantly increase the cubic transport scattering time, thereby driving a dramatic enhancement of σ(2) yxx. First-principles calculations further reveal that the Berry curvature distribution on the Fermi surface strongly depends on band filling. As the Fermi level approaches a band crossing in the Ta 5d subband near the M point, the Berry curvature triple undergoes a sign change, accounting for the experimentally observed sign reversal of the nonlinear Hall response. Our work offers a new strategy to optically boost and tune the nonlinear Hall effect in oxide 2DEG systems, paving the way for applications in light-controlled rectification and nonlinear electronic devices.

cond-mat.mes-hall

Domain-wall motion induced by spin transfer torque delivered by helicity-dependent femtosecond laser

In magnetic wires with perpendicular anisotropy, moving domain with only current or only circularly polarized light requires a high power. Here, we propose to reduce it by using both short current pulses and femtosecond laser pulses simultaneously. The wires were made out of perpendicularly magnetized film of Pt/Co/Ni/Co/Pt. The displacement of the domain wall is found to be dependent on the laser helicity. Based on a quantitative analysis of the current-induced domain wall motion, the spin orbit torque contribution can be neglected when compared to the spin transfer torque contribution. The effective field of the spin transfer torque is extracted from the pulsed field domain wall measurements. Finally, our result can be described using the Fatuzzo-Labrune model and considering the effective field due to the polarized laser beam, the effective field due to spin transfer torque, and the Gaussian temperature distribution of the laser spot.

cond-mat.mes-hall

Low spin-polarization in the heavy metal\ferromagnet structures detected through the domain wall motion by synchronized magnetic field and current

CoFeB is a very soft material, in which Domain Wall (DW) can be moved easily under a weak magnetic field. However, it is very difficult to move DWs in Ta\CoFeB\MgO nanowires with interfacial perpendicular magnetic anisotropy through a spin-polarized current, and this limits the perspectives of racetrack memory driven by the current-in-plane mechanism. To investigate this phenomenon, we performed experiments of DW velocity measurement by applying a magnetic field and a current simultaneously. Working in the precessional regime, we have been able to see a very important effect of the spin-polarized current, which allows evaluating the polarization rate of the charge carriers. An unexpected quite low spin polarization rate down to 0.26 have been obtained, which can explain the low efficiency of DW motion induced by the spin-polarized current. Possible reasons for this low rate are analyzed, such as the spin relaxation in the Ta layer.

cond-mat.mtrl-sci

Heterogeneous Memristive Devices Enabled by Magnetic Tunnel Junction Nanopillars Surrounded by Resistive Silicon Switches

Emerging non-volatile memories (NVMs) have currently attracted great interest for their potential applications in advanced low-power information storage and processing technologies. Conventional NVMs, such as magnetic random access memory (MRAM) and resistive random access memory (RRAM) suffer from limitations of low tunnel magnetoresistance (TMR), low access speed or finite endurance. NVMs with synergetic advantages are still highly desired for future computer architectures. Here, we report a heterogeneous memristive device composed of a magnetic tunnel junction (MTJ) nanopillar surrounded by resistive silicon switches, named resistively enhanced MTJ (Re-MTJ), that may be utilized for novel memristive memories, enabling new functionalities that are inaccessible for conventional NVMs. The Re-MTJ device features a high ON/OFF ratio of >1000% and multilevel resistance behaviour by combining magnetic switching together with resistive switching mechanisms. The magnetic switching originates from the MTJ, while the resistive switching is induced by a point-switching filament process that is related to the mobile oxygen ions. Microscopic evidence of silicon aggregated as nanocrystals along the edges of the nanopillars verifies the synergetic mechanism of the heterogeneous memristive device. This device may provide new possibilities for advanced memristive memory and computing architectures, e.g., in-memory computing and neuromorphics.

physics.app-ph

Current-induced magnetization switching in atom-thick tungsten engineered perpendicular magnetic tunnel junctions with large tunnel magnetoresistance

Perpendicular magnetic tunnel junctions based on MgO/CoFeB structures are of particular interest for magnetic random-access memories because of their excellent thermal stability, scaling potential, and power dissipation. However, the major challenge of current-induced switching in the nanopillars with both a large tunnel magnetoresistance ratio and a low junction resistance is still to be met. Here, we report spin transfer torque switching in nano-scale perpendicular magnetic tunnel junctions with a magnetoresistance ratio up to 249% and a resistance area product as low as 7.0 Ω.μm2, which consists of atom-thick W layers and double MgO/CoFeB interfaces. The efficient resonant tunnelling transmission induced by the atom-thick W layers could contribute to the larger magnetoresistance ratio than conventional structures with Ta layers, in addition to the robustness of W layers against high temperature diffusion during annealing. The switching critical current density could be lower than 3.0 MA.cm-2 for devices with a 45 nm radius.

physics.app-ph