Searcharxiv⌕ Search

arXiv subjects

Huazi Zhang

Publications and source records attributed to Huazi Zhang.

At least 37 records · Page 2Linked to original sources

Improving the Gilbert-Varshamov Bound by Graph Spectral Method

We improve Gilbert-Varshamov bound by graph spectral method. Gilbert graph $G_{q,n,d}$ is a graph with all vectors in $\mathbb{F}_q^n$ as vertices where two vertices are adjacent if their Hamming distance is less than $d$. In this paper, we calculate the eigenvalues and eigenvectors of $G_{q,n,d}$ using the properties of Cayley graph. The improved bound is associated with the minimum eigenvalue of the graph. Finally we give an algorithm to calculate the bound and linear codes which satisfy the bound.

cs.IT↗

On the Message Passing Efficiency of Polar and Low-Density Parity-Check Decoders

This study focuses on the efficiency of message-passing-based decoding algorithms for polar and low-density parity-check (LDPC) codes. Both successive cancellation (SC) and belief propagation (BP) decoding algorithms are studied {in} the message-passing framework. Counter-intuitively, SC decoding demonstrates the highest decoding efficiency, although it was considered a weak decoder {in terms of} error-correction performance. We analyze the complexity-performance tradeoff to dynamically track the decoding efficiency, where the complexity is measured by the number of messages passed (NMP), and the performance is measured by the statistical distance to the maximum a posteriori (MAP) estimate. This study offers a new insight into the contribution of each message passed in decoding, and compares various decoding algorithms on a message-by-message level. The analysis corroborates recent results on terabits-per-second polar SC decoders, and might shed light on better scheduling strategies.

cs.IT↗

Deterministic Identification over Channels without CSI

Identification capacities of randomized and deterministic identification were proved to exceed channel capacity for Gaussian channels \emph{with} channel side information (CSI). In this work, we extend deterministic identification to the block fading channels without CSI by applying identification codes for both channel estimation and user identification. We prove that identification capacity is asymptotically higher than transmission capacity even in the absence of CSI. And we also analyze the finite-length performance theoretically and numerically. The simulation results verify the feasibility of the proposed blind deterministic identification in finite blocklength regime.

cs.IT↗

The Complete SC-invariant Affine Automorphisms of Polar Codes

Automorphism ensemble (AE) decoding for polar codes was proposed by decoding permuted codewords with successive cancellation (SC) decoders in parallel and hence has lower latency compared to that of successive cancellation list (SCL) decoding. However, some automorphisms are SC-invariant, thus are redundant in AE decoding. In this paper, we find a necessary and sufficient condition related to the block lower-triangular structure of transformation matrices to identify SC-invariant automorphisms. Furthermore, we provide an algorithm to determine the complete SC-invariant affine automorphisms under a specific polar code construction.

cs.IT↗

Universal Polar Coding for Parallel Gaussian Channels with Non-Binary Inputs and Its Applications to HARQ and MIMO

In this paper, we first propose an universal polar coding scheme for parallel Gaussian channels with non-binary inputs. It is assumed that the encoder knows only the sum capacity of M parallel channels instead of the capacity of any single channel. By decomposing each parallel channel into T = [log2r] sub channels, we therefore obtain MT binary sub-channels. A super polar coding scheme that across all sub-channels is then proposed. This scheme can achieve the sum capacity when the block length is sufficiently large. We have also discussed the applications of parallel polar coding design for both the HARQ and MIMO systems. It is shown that a capacity-achieving HARQ scheme can be obtained for block fading channel and a capacity-achieving MIMO design that requires only the feedback of the sum rate of all MIMO layers can also be attained.

cs.IT↗

Fast polar codes for terabits-per-second throughput communications

Targeting high-throughput and low-power communications, we implement two successive cancellation (SC) decoders for polar codes. With $16nm$ ASIC technology, the area efficiency and energy efficiency are $4Tbps/mm^2$ and $0.63pJ/bit$, respectively, for the unrolled decoder, and $561Gbps/mm^2$ and $1.21pJ/bit$, respectively, for the recursive decoder. To achieve such a high throughput, a novel code construction, coined as fast polar codes, is proposed and jointly optimized with a highly-parallel SC decoding architecture. First, we reuse existing modules to fast decode more outer code blocks, and then modify code construction to facilitate faster decoding for all outer code blocks up to a degree of parallelism of $16$. Furthermore, parallel comparison circuits and bit quantization schemes are customized for hardware implementation. Collectively, they contribute to an $2.66\times$ area efficiency improvement and $33\%$ energy saving over the state of the art.

cs.IT↗

A unified polar decoder platform for low-power and low-cost devices

In this paper, we design a polar decoding platform for diverse application scenarios that require low-cost and low-power communications. Specifically, prevalent polar decoders such as successive cancellation (SC), SC-list (SCL) and Fano decoders are all supported under the same architecture. Unlike high-throughput or low-latency decoders that promote parallelism, this architecture promotes serialization by repeatedly calling a ``sub-process'' that is executed by a core module. The resulting serial SCL-8 decoder is only 3 times as big as an SC decoder. Cost and power are minimized through resource sharing and adaptive decoding techniques, etc. We carried out performance simulation and hardware implementation to evaluate the actual chip area and energy consumption.

cs.IT↗

On the Weight Spectrum of Pre-Transformed Polar Codes

Polar codes are the first class of channel codes achieving the symmetric capacity of the binary-input discrete memoryless channels with efficient encoding and decoding algorithms. But the weight spectrum of Polar codes is relatively poor compared to RM codes, which degrades their ML performance. Pre-transformation with an upper-triangular matrix (including cyclic redundancy check (CRC), parity-check (PC) and polarization-adjusted convolutional (PAC) codes), improves weight spectrum while retaining polarization. In this paper, the weight spectrum of upper-triangular pre-transformed Polar Codes is mathematically analyzed. In particular, we focus on calculating the number of low-weight codewords due to their impact on error-correction performance. Simulation results verify the accuracy of the analysis.

cs.IT↗

Performance of CRC Concatenated Pre-transformed RM-Polar Codes

In this paper, we discuss pre-transformed RM-Polar codes and cyclic redundancy check (CRC) concatenated pre-transformed RM-Polar codes. The simulation results show that the pre-transformed RM-Polar (256, 128+9) code concatenated with 9-bit CRC can achieve a frame error rate (FER) of 0.001 at Eb/No=1.95dB under the list decoding, which is about 0.05dB from the RCU bound. The pre-transformed RM-Polar (512, 256+9) concatenated with 9-bit CRC can achieve a FER of 0.001 at Eb/No=1.6dB under the list decoding, which is 0.15dB from the RCU bound.

cs.IT↗

The Complete Affine Automorphism Group of Polar Codes

Recently, a permutation-based successive cancellation (PSC) decoding framework for polar codes attaches much attention. It decodes several permuted codewords with independent successive cancellation (SC) decoders. Its latency thus can be reduced to that of SC decoding. However, the PSC framework is ineffective for permutations falling into the lower-triangular affine (LTA) automorphism group, as they are invariant under SC decoding. As such, a larger block lower-triangular affine (BLTA) group that contains SC-variant permutations was discovered for decreasing polar codes. But it was unknown whether BLTA equals the complete automorphism group. In this paper, we prove that BLTA equals the complete automorphisms of decreasing polar codes that can be formulated as affine trasformations.

cs.IT↗

A Soft Cancellation Decoder for Parity-Check Polar Codes

Polar codes has been selected as the channel coding scheme for 5G new radio (NR) control channel. Specifically, a special type of parity-check polar (PC-Polar) codes was adopted in uplink control information (UCI). In this paper, we propose a parity-check soft-cancellation (PC-SCAN) algorithm and its simplified version to decode PC-Polar codes. The potential benefits are two-fold. First, PC-SCAN can provide soft output for PC-Polar codes, which is essential for advanced turbo receivers. Second, the decoding performance is better than that of successive cancellation (SC). This is due to the fact that parity-check constraints can be exploited by PC-SCAN to enhance the reliability of other information bits over the iterations. Moreover, we describe a cyclic-shift-register (CSR) based implementation "CSR-SCAN" to reduce both hardware cost and latency with minimum performance loss.

cs.IT↗

Toward Terabits-per-second Communications: A High-Throughput Hardware Implementation of $G_N$-Coset Codes

Recently, a parallel decoding algorithm of $G_N$-coset codes was proposed.The algorithm exploits two equivalent decoding graphs.For each graph, the inner code part, which consists of independent component codes, is decoded in parallel. The extrinsic information of the code bits is obtained and iteratively exchanged between the graphs until convergence. This algorithm enjoys a higher decoding parallelism than the previous successive cancellation algorithms, due to the avoidance of serial outer code processing. In this work, we present a hardware implementation of the parallel decoding algorithm, it can support maximum $N=16384$. We complete the decoder's physical layout in TSMC $16nm$ process and the size is $999.936μm\times 999.936μm, \,\approx 1.00mm^2$. The decoder's area efficiency and power consumption are evaluated for the cases of $N=16384,K=13225$ and $N=16384, K=14161$. Scaled to $7nm$ process, the decoder's throughput is higher than $477Gbps/mm^2$ and $533Gbps/mm^2$ with five iterations.

cs.IT↗

Toward Terabits-per-second Communications: Low-Complexity Parallel Decoding of $G_N$-Coset Codes

Recently, a parallel decoding framework of $G_N$-coset codes was proposed. High throughput is achieved by decoding the independent component polar codes in parallel. Various algorithms can be employed to decode these component codes, enabling a flexible throughput-performance tradeoff. In this work, we adopt SC as the component decoders to achieve the highest-throughput end of the tradeoff. The benefits over soft-output component decoders are reduced complexity and simpler (binary) interconnections among component decoders. To reduce performance degradation, we integrate an error detector and a log-likelihood ratio (LLR) generator into each component decoder. The LLR generator, specifically the damping factors therein, is designed by a genetic algorithm. This low-complexity design can achieve an area efficiency of $533Gbps/mm^2$ under 7nm technology.

cs.IT↗

On Pre-transformed Polar Codes

In this paper, we prove that any pre-transformation with an upper-triangular matrix (including cyclic redundancy check (CRC), parity-check (PC) and convolution code (CC) matrix) does not reduce the code minimum distance and an properly designed pre-transformation can reduce the number of codewords with the minimum distance. This explains that the pre-transformed polar codes can perform better than the Polar/RM codes.

cs.IT↗

Reinforcement Learning for Nested Polar Code Construction

In this paper, we model nested polar code construction as a Markov decision process (MDP), and tackle it with advanced reinforcement learning (RL) techniques. First, an MDP environment with state, action, and reward is defined in the context of polar coding. Specifically, a state represents the construction of an $(N,K)$ polar code, an action specifies its reduction to an $(N,K-1)$ subcode, and reward is the decoding performance. A neural network architecture consisting of both policy and value networks is proposed to generate actions based on the observed states, aiming at maximizing the overall rewards. A loss function is defined to trade off between exploitation and exploration. To further improve learning efficiency and quality, an `integrated learning' paradigm is proposed. It first employs a genetic algorithm to generate a population of (sub-)optimal polar codes for each $(N,K)$, and then uses them as prior knowledge to refine the policy in RL. Such a paradigm is shown to accelerate the training process, and converge at better performances. Simulation results show that the proposed learning-based polar constructions achieve comparable, or even better, performances than the state of the art under successive cancellation list (SCL) decoders. Last but not least, this is achieved without exploiting any expert knowledge from polar coding theory in the learning algorithms.

cs.IT↗

AI Coding: Learning to Construct Error Correction Codes

In this paper, we investigate an artificial-intelligence (AI) driven approach to design error correction codes (ECC). Classic error correction code was designed upon coding theory that typically defines code properties (e.g., hamming distance, subchannel reliability, etc.) to reflect code performance. Its code design is to optimize code properties. However, an AI-driven approach doesn't necessarily rely on coding theory any longer. Specifically, we propose a constructor-evaluator framework, in which the code constructor is realized by AI algorithms and the code evaluator provides code performance metric measurements. The code constructor keeps improving the code construction to maximize code performance that is evaluated by the code evaluator. As examples, we construct linear block codes and polar codes with reinforcement learning (RL) and evolutionary algorithms. The results show that comparable code performance can be achieved with respect to the existing codes. It is noteworthy that our method can provide superior performances where existing classic constructions fail to achieve optimum for a specific decoder (e.g., list decoding for polar codes).

cs.IT↗

On the Construction of $G_N$-coset Codes for Parallel Decoding

In this paper, we propose a type of $G_N$-coset codes for a highly parallel stage-permuted turbo-like decoder. The decoder exploits the equivalence between two stage-permuted factor graphs of $G_N$-coset codes. Specifically, the inner codes of a $G_N$-coset code consist of independent component codes, thus are decoded in parallel. The extrinsic information of the code bits is obtained and iteratively exchanged between the two graphs until convergence. Accordingly, we explore a heuristic and flexible code construction method (information set selection) for various information lengths and coding rates. Simulations show that the proposed $G_N$-coset codes could achieve a coding performance comparable with polar codes but enjoy higher decoding parallelism.

cs.IT↗

Realistic Channel Models Pre-training

In this paper, we propose a neural-network-based realistic channel model with both the similar accuracy as deterministic channel models and uniformity as stochastic channel models. To facilitate this realistic channel modeling, a multi-domain channel embedding method combined with self-attention mechanism is proposed to extract channel features from multiple domains simultaneously. This 'one model to fit them all' solution employs available wireless channel data as the only data set for self-supervised pre-training. With the permission of users, network operators or other organizations can make use of some available user specific data to fine-tune this pre-trained realistic channel model for applications on channel-related downstream tasks. Moreover, even without fine-tuning, we show that the pre-trained realistic channel model itself is a great tool with its understanding of wireless channel.

eess.SP↗