arXiv subjects

Hui Cao

Publications and source records attributed to Hui Cao.

At least 37 records · Page 2Linked to original sources

arXiv2025

Wavefront shaping enables high-power multimode fiber amplifier with output control

Over the past two decades there have been tremendous advances in high-power fiber lasers, which have provided a powerful tool for science, engineering and defense. A major roadblock for further power scaling of single-frequency fiber laser amplifiers is stimulated Brillouin scattering. Intense efforts were devoted to mitigate this nonlinear process, but mostly limited to single-mode or few-mode fiber amplifiers which have good beam quality. Here we explore a highly multimode fiber amplifier, where stimulated Brillouin scattering is greatly suppressed due to reduction of light intensity in a large fiber core and broadening of Brillouin scattering spectrum by multimode excitation. To control the output beam profile, we apply spatial wavefront shaping technique to the input light of a nonlinear amplifier to focus the output beam to a diffraction-limited spot outside the fiber facet. Our multimode fiber amplifier can operate at high power with high efficiency and narrow linewidth which ensures high coherence. Optical wavefront shaping enables coherent control of multimode laser amplification, with potential applications in coherent beam combining, large-scale interferometry and directed energy delivery.

physics.optics↗

arXiv2024

Amplifier scheme: driven by indirect-drive under 10 MJ laser toward inertial fusion energy

Burn efficiency is a key for commercial feasibility of fusion power station for inertial fusion energy, while burn efficiency is usually lower than 30% in the central ignition scheme of inertial confinement fusion (ICF). A recent conceptual design for a 10 MJ laser driver [Z. Sui and K. Lan et al., Matter Radiat. Extremes 9, 043002 (2024)] provides a new room for target design to achieve a higher burn efficiency. Here, we take the advantage of fuel density in reaction rate and propose a novel amplifier scheme for increasing burn efficiency via two cascading explosions by ICF. The amplifier scheme can be realized either by indirect-drive or by direct-drive. Here, we give a 1D design for an indirect-driven amplifier capsule containing 2.02 mg DT fuel under a 300 eV radiation generated by a 10 MJ and 1785 TW laser inside an octahedral spherical hohlraum. As a result, the amplifier capsule has a burn efficiency of 48% and a gain of 33 at a convergence ratio of 24. This novel scheme can achieve a relatively high burn efficiency at a relatively low convergence ratio, which can greatly relax the stringent requirements of high gain fusion on hot spot ignition conditions and engineering issues.

physics.plasm-ph↗

arXiv2024

Nonlinear optical encoding enabled by recurrent linear scattering

Optical information processing and computing can potentially offer enhanced performance, scalability and energy efficiency. However, achieving nonlinearity-a critical component of computation-remains challenging in the optical domain. Here we introduce a design that leverages a multiple-scattering cavity to passively induce optical nonlinear random mapping with a continuous-wave laser at a low power. Each scattering event effectively mixes information from different areas of a spatial light modulator, resulting in a highly nonlinear mapping between the input data and output pattern. We demonstrate that our design retains vital information even when the readout dimensionality is reduced, thereby enabling optical data compression. This capability allows our optical platforms to offer efficient optical information processing solutions across applications. We demonstrate our design's efficacy across tasks, including classification, image reconstruction, keypoint detection and object detection, all of which are achieved through optical data compression combined with a digital decoder. In particular, high performance at extreme compression ratios is observed in real-time pedestrian detection. Our findings open pathways for novel algorithms and unconventional architectural designs for optical computing.

physics.optics↗

arXiv2024

Spectral Width of Maximum Deposition Eigenchannels in Diffusive Media

The maximum deposition eigenchannel provides the largest possible power delivery to a target region inside a diffusive medium by optimizing the incident wavefront of a monochromatic beam. It originates from constructive interference of scattered waves, which is frequency sensitive. We investigate the spectral width of maximum deposition eigenchannels over a range of target depths using numerical simulations of a 2D diffusive system. Compared to tight focusing into the system, power deposition to an extended region is more sensitive to frequency detuning. The spectral width of enhanced delivery to a large target displays a rather weak, non-monotonic variation with target depth, in contrast to a sharp drop of focusing bandwidth with depth. While the maximum enhancement of power deposited within a diffusive system can exceed that of power transmitted through it, this comes at the cost of a narrower spectral width. We investigate the narrower deposition width in terms of the constructive interference of transmission eigenchannels within the target. We further observe that the spatial field distribution inside the target region decorrelates slower with spectral detuning than power decay of the maximum deposition eigenchannel. Additionally, absorption increases the spectral width of deposition eigenchannels, but the depth dependence remains qualitatively identical to that without absorption. These findings hold for any diffusive waves, including electromagnetic waves, acoustic waves, pressure waves, mesoscopic electrons, and cold atoms.

physics.optics↗

arXiv2024

Output beam shaping of a multimode fiber amplifier

Multimode fibers provide a promising platform for realizing high-power laser amplifiers with suppressed nonlinearities and instabilities. The potential degradation of optical beam quality has been a major concern for highly multimode fiber amplifiers. We show numerically that the beam propagation factor M2 of a single-frequency multimode fiber amplifier can be reduced to nearly unity by shaping the input or output beam profile with spatial phase-masks. Our method works for narrowband multimode fiber amplifiers with strong gain saturation, pump depletion, random mode coupling and polarization mixing. The numerical results validate our approach of utilizing highly multimode excitation to mitigate nonlinear effects in high-power fiber amplifiers and performing input wavefront shaping to control output beam profile and polarization state.

physics.optics↗

arXiv2024

Anderson transition for light in three dimensions

We study Anderson transition for light in three dimensions by performing large-scale ab-initio simulations of electromagnetic wave transport in disordered ensembles of conducting spheres. A mobility edge that separates diffusive transport and Anderson localization is identified, revealing a sharp transition from diffusion to localization for light. Critical behavior in the vicinity of the mobility edge is well described by a single-parameter scaling law. The critical exponent is found to be consistent with the value known for the Anderson transition of the orthogonal universality class. Statistical distribution of total transmission at the mobility edge is described without any fit parameter by the diagrammatic perturbation theory originally developed for scalar wave diffusion, but notable deviation from the theory is found when Anderson localization sets in.

physics.optics↗

arXiv2024

Theory of Transverse Mode Instability in Fiber Amplifiers with Multimode Excitations

Transverse Mode Instability (TMI) which results from dynamic nonlinear thermo-optical scattering is the primary limitation to power scaling in high-power fiber lasers and amplifiers. It has been proposed that TMI can be suppressed by exciting multiple modes in a highly multimode fiber. We derive a semi-analytic frequency-domain theory of the threshold for the onset of TMI under arbitrary multimode input excitation for general fiber geometries. We show that TMI results from exponential growth of noise in all the modes at downshifted frequencies due to the thermo-optical coupling. The noise growth rate in each mode is given by the sum of signal powers in various modes weighted by pairwise thermo-optical coupling coefficients. We calculate thermo-optical coupling coefficients for all $\sim$$10^4$ pairs of modes in a standard circular multimode fiber and show that modes with large transverse spatial frequency mismatch are weakly coupled resulting in a banded coupling matrix. This short-range behavior is due to the diffusive nature of the heat propagation which mediates the coupling and leads to a lower noise growth rate upon multimode excitation compared to single mode, resulting in significant TMI suppression. We find that the TMI threshold increases linearly with the number of modes that are excited, leading to more than an order of magnitude increase in the TMI threshold in a 82-mode fiber amplifier. Using our theory, we also calculate TMI threshold in fibers with non-circular geometries upon multimode excitation and show the linear scaling of TMI threshold to be a universal property of different fibers.

physics.optics↗

arXiv2024

Optimal input excitations for suppressing nonlinear instabilities in multimode fibers

Wavefront shaping has become a powerful tool for manipulating light propagation in various complex media undergoing linear scattering. Controlling nonlinear optical interactions with spatial degrees of freedom is a relatively recent but growing area of research. A wavefront-shaping-based approach can be used to suppress nonlinear stimulated Brillouin scattering (SBS) and transverse mode instability (TMI), which are the two main limitations to power scaling in high-power narrowband fiber amplifiers. Here we formulate both SBS and TMI suppression as optimization problems with respect to coherent multimode input excitation in a given multimode fiber. We develop an efficient method for finding the globally optimal input excitation for SBS and TMI suppression using linear programming. We theoretically show that optimally exciting a standard multimode fiber leads to roughly an order of magnitude enhancement in output power limited by SBS and TMI, compared to fundamental-mode-only excitation. We find that the optimal mode content is robust to small perturbations and our approach works even in the presence of mode dependent loss and gain. Optimal mode content can be excited in real experiments using spatial light modulators, creating a novel platform for instability-free ultrahigh-power fiber lasers.

physics.optics↗

arXiv2024

Angle-Resolved Magneto-Chiral Anisotropy in a Non-Centrosymmetric Atomic Layer Superlattice

Chirality in solid-state materials has sparked significant interest due to potential applications of topologically-protected chiral states in next-generation information technology. The electrical magneto-chiral effect (eMChE), arising from relativistic spin-orbit interactions, shows great promise for developing chiral materials and devices for electronic integration. Here we demonstrate an angle-resolved eMChE in an A-B-C-C type atomic-layer superlattice lacking time and space inversion symmetry. We observe non-superimposable enantiomers of left-handed and right-handed tilted uniaxial magnetic anisotropy as the sample rotates under static fields, with the tilting angle reaching a striking 45 degree. Magnetic force microscopy and atomistic simulations correlate the tilt to the emergence and evolution of chiral spin textures. The Dzyaloshinskii-Moriya interaction lock effect in competition with Zeeman effect is demonstrated to be responsible for the angle-resolved eMChE. Our findings open up a new horizon for engineering angle-resolved magneto-chiral anisotropy, shedding light on the development of novel angle-resolved sensing or writing techniques in chiral spintronics.

cond-mat.mtrl-sci↗

arXiv2024

Joint Counting, Detection and Re-Identification for Multi-Object Tracking

The recent trend in 2D multiple object tracking (MOT) is jointly solving detection and tracking, where object detection and appearance feature (or motion) are learned simultaneously. Despite competitive performance, in crowded scenes, joint detection and tracking usually fail to find accurate object associations due to missed or false detections. In this paper, we jointly model counting, detection and re-identification in an end-to-end framework, named CountingMOT, tailored for crowded scenes. By imposing mutual object-count constraints between detection and counting, the CountingMOT tries to find a balance between object detection and crowd density map estimation, which can help it to recover missed detections or reject false detections. Our approach is an attempt to bridge the gap of object detection, counting, and re-Identification. This is in contrast to prior MOT methods that either ignore the crowd density and thus are prone to failure in crowded scenes,or depend on local correlations to build a graphical relationship for matching targets. The proposed MOT tracker can perform online and real-time tracking, and achieves the state-of-the-art results on public benchmarks MOT16 (MOTA of 79.7), MOT17 (MOTA of 81.3%) and MOT20 (MOTA of 78.9%).

cs.CV↗

arXiv2024

Exploiting spacetime symmetry in dissipative nonlinear multimode amplifiers for output control

Time-reversal symmetry enables shaping input waves to control output waves in many linear and nonlinear systems; however energy dissipation violates such symmetry. We consider a saturated multimode fiber amplifier in which light generates heat flow and suffers nonlinear thermo-optical scattering, breaking time-reversal symmetry. We identify a spacetime symmetry which maps the target output back to an input field. This mapping employs phase conjugation, gain and absorption substitution but not time reversal, and holds in steady-state and for slowly varying inputs. Our results open the possibility of output control of a saturated multimode fiber amplifier.

physics.optics↗

arXiv2023

Impact of cavity geometry on microlaser dynamics

We experimentally investigate spatio-temporal lasing dynamics in semiconductor microcavities with various geometries, featuring integrable or chaotic ray dynamics. The classical ray dynamics directly impacts the lasing dynamics, which is primarily determined by the local directionality of long-lived ray trajectories. The directionality of optical propagation dictates the characteristic length scales of intensity variations, which play a pivotal role in nonlinear light-matter interactions. While wavelength-scale intensity variations tend to stabilize lasing dynamics, modulation on much longer scales causes spatial filamentation and irregular pulsation. Our results will pave the way to control the lasing dynamics by engineering the cavity geometry and ray dynamical properties.

physics.optics↗

arXiv2023

Delivering Broadband Light Deep Inside Diffusive Media

Wavefront shaping enables targeted delivery of coherent light into random-scattering media, such as biological tissue, by constructive interference of scattered waves. However, broadband waves have short coherence times, weakening the interference effect. Here, we introduce a broadband deposition matrix that identifies a single input wavefront that maximizes the broadband energy delivered to an extended target deep inside a diffusive system. We experimentally demonstrate that long-range spatial and spectral correlations result in a six-fold energy enhancement for targets containing more than 1500 speckle grains and located at a depth of up to ten transport mean free paths, even when the coherence time is an order of magnitude shorter than the diffusion dwell time of light in the scattering sample. In the broadband (fast decoherence) limit, enhancement of energy delivery to extended targets becomes nearly independent of the target depth and dissipation. Our experiments, numerical simulations, and analytic theory establish the fundamental limit for broadband energy delivery deep into a diffusive system, which has important consequences for practical applications.

physics.optics↗

arXiv2023

Creating high-contrast patterns in multiple-scattering media via wavefront shaping

Wavefront shaping allows focusing light through or inside strongly scattering media, but the background intensity also increases due to long-range correlations, reducing the target's contrast. By manipulating non-local intensity correlations of scattered waves in a disordered system with input wavefront shaping, we create high-contrast patterns behind strongly scattering media and targeted energy delivery into a diffusive system with minimal change in the surrounding intensity. These are achieved by introducing the contrast operator and the difference operator, and utilizing their eigenstates to maximize the target-to-background intensity contrast and energy difference. This work opens the door to coherent control of non-local effects in wave transport for practical applications.

physics.optics↗

arXiv2023

JIANG: Chinese Open Foundation Language Model

With the advancements in large language model technology, it has showcased capabilities that come close to those of human beings across various tasks. This achievement has garnered significant interest from companies and scientific research institutions, leading to substantial investments in the research and development of these models. While numerous large models have emerged during this period, the majority of them have been trained primarily on English data. Although they exhibit decent performance in other languages, such as Chinese, their potential remains limited due to factors like vocabulary design and training corpus. Consequently, their ability to fully express their capabilities in Chinese falls short. To address this issue, we introduce the model named JIANG (Chinese pinyin of ginger) specifically designed for the Chinese language. We have gathered a substantial amount of Chinese corpus to train the model and have also optimized its structure. The extensive experimental results demonstrate the excellent performance of our model.

cs.CL↗

arXiv2023

Controlling light propagation in multimode fibers for imaging, spectroscopy and beyond

Light transport in a highly multimode fiber exhibits complex behavior in space, time, frequency and polarization, especially in the presence of mode coupling. The newly developed techniques of spatial wavefront shaping turn out to be highly suitable to harness such enormous complexity: a spatial light modulator enables precise characterization of field propagation through a multimode fiber, and by adjusting the incident wavefront it can accurately tailor the transmitted spatial pattern, temporal profile and polarization state. This unprecedented control leads to multimode fiber applications in imaging, endoscopy, optical trapping and microfabrication. Furthermore, the output speckle pattern from a multimode fiber encodes spatial, temporal, spectral and polarization properties of the input light, allowing such information to be retrieved from spatial measurements only. This article provides an overview of recent advances and breakthroughs in controlling light propagation in multimode fibers, and discusses newly emerging applications.

physics.optics↗

arXiv2023

Mitigating stimulated Brillouin scattering in multimode fibers with focused output via wavefront shaping

The key challenge for high-power delivery through optical fibers is overcoming nonlinear optical effects. To keep a smooth output beam, most techniques for mitigating optical nonlinearities are restricted to single-mode fibers. Moving out of the single-mode paradigm, we show experimentally that wavefront-shaping of coherent input light that is incident on a highly multimode fiber can increase the power threshold for stimulated Brillouin scattering (SBS) by an order of magnitude, whilst simultaneously controlling the output beam profile. The theory reveals that the suppression of SBS is due to the relative weakness of intermodal scattering compared to intramodal scattering, and to an effective broadening of the Brillouin spectrum under multimode excitation. Our method is efficient, robust, and applicable to continuous waves and pulses. This work points toward a promising route for suppressing detrimental nonlinear effects in optical fibers, which will enable further power scaling of high-power fiber systems for applications to directed energy, remote sensing, and gravitational-wave detection.

physics.optics↗

arXiv2023

A Fast Hybrid Cascade Network for Voxel-based 3D Object Classification

Voxel-based 3D object classification has been thoroughly studied in recent years. Most previous methods convert the classic 2D convolution into a 3D form that will be further applied to objects with binary voxel representation for classification. However, the binary voxel representation is not very effective for 3D convolution in many cases. In this paper, we propose a hybrid cascade architecture for voxel-based 3D object classification. It consists of three stages composed of fully connected and convolutional layers, dealing with easy, moderate, and hard 3D models respectively. Both accuracy and speed can be balanced in our proposed method. By giving each voxel a signed distance value, an obvious gain regarding the accuracy can be observed. Besides, the mean inference time can be speeded up hugely compared with the state-of-the-art point cloud and voxel based methods.

cs.CV↗