arXiv subjects

Hui Shuai

Publications and source records attributed to Hui Shuai.

7 recordsLinked to original sources

arXiv2025

Enhanced Spatiotemporal Consistency for Image-to-LiDAR Data Pretraining

LiDAR representation learning has emerged as a promising approach to reducing reliance on costly and labor-intensive human annotations. While existing methods primarily focus on spatial alignment between LiDAR and camera sensors, they often overlook the temporal dynamics critical for capturing motion and scene continuity in driving scenarios. To address this limitation, we propose SuperFlow++, a novel framework that integrates spatiotemporal cues in both pretraining and downstream tasks using consecutive LiDAR-camera pairs. SuperFlow++ introduces four key components: (1) a view consistency alignment module to unify semantic information across camera views, (2) a dense-to-sparse consistency regularization mechanism to enhance feature robustness across varying point cloud densities, (3) a flow-based contrastive learning approach that models temporal relationships for improved scene understanding, and (4) a temporal voting strategy that propagates semantic information across LiDAR scans to improve prediction consistency. Extensive evaluations on 11 heterogeneous LiDAR datasets demonstrate that SuperFlow++ outperforms state-of-the-art methods across diverse tasks and driving conditions. Furthermore, by scaling both 2D and 3D backbones during pretraining, we uncover emergent properties that provide deeper insights into developing scalable 3D foundation models. With strong generalizability and computational efficiency, SuperFlow++ establishes a new benchmark for data-efficient LiDAR-based perception in autonomous driving. The code is publicly available at https://github.com/Xiangxu-0103/SuperFlow

cs.CV↗

arXiv2025

PoI: A Filter to Extract Pixel of Interest from Novel Views for Scene Coordinate Regression

Neural View Synthesis (NVS) techniques such as NeRF and 3D Gaussian Splatting (3DGS) have enabled photorealistic rendering from novel viewpoints and are increasingly used to augment training data for visual localization. However, these methods fundamentally rely on observed geometry and radiance; they interpolate existing information but cannot hallucinate unseen 3D structures or recover missing content under sparse or extreme viewpoints. As a result, rendered views often exhibit blur, structural distortion, or incomplete geometry. While such imperfections may be tolerated by Camera Pose Regression (CPR) methods, they severely degrade Scene Coordinate Regression (SCR), which requires accurate per-pixel 3D supervision. To address this limitation, we introduce PoI (Pixel-of-Interest), a framework that enables effective NVS augmentation for SCR-based localization. We first employ 3DGS to render novel views and leverage a single-step diffusion model to refine them, allowing the synthesis of structurally plausible details beyond purely geometry-driven interpolation. However, even diffusion-refined views may contain unreliable pixels. Therefore, we propose a progressive pixel-level filtering strategy based on reprojection error to selectively retain trustworthy synthetic pixels during training while suppressing harmful ones. Extensive experiments on 7Scenes and Cambridge Landmarks demonstrate that our method consistently improves localization accuracy over strong SCR baselines and achieves state-of-the-art performance with competitive training efficiency. Our results reveal that, for SCR, the benefit of novel view augmentation depends not only on generative realism but also on explicit control of pixel-level reliability.

cs.CV↗

arXiv2025

LiMoE: Mixture of LiDAR Representation Learners from Automotive Scenes

LiDAR data pretraining offers a promising approach to leveraging large-scale, readily available datasets for enhanced data utilization. However, existing methods predominantly focus on sparse voxel representation, overlooking the complementary attributes provided by other LiDAR representations. In this work, we propose LiMoE, a framework that integrates the Mixture of Experts (MoE) paradigm into LiDAR data representation learning to synergistically combine multiple representations, such as range images, sparse voxels, and raw points. Our approach consists of three stages: i) Image-to-LiDAR Pretraining, which transfers prior knowledge from images to point clouds across different representations; ii) Contrastive Mixture Learning (CML), which uses MoE to adaptively activate relevant attributes from each representation and distills these mixed features into a unified 3D network; iii) Semantic Mixture Supervision (SMS), which combines semantic logits from multiple representations to boost downstream segmentation performance. Extensive experiments across eleven large-scale LiDAR datasets demonstrate our effectiveness and superiority. The code has been made publicly accessible.

cs.CV↗

arXiv2024

4D Contrastive Superflows are Dense 3D Representation Learners

In the realm of autonomous driving, accurate 3D perception is the foundation. However, developing such models relies on extensive human annotations -- a process that is both costly and labor-intensive. To address this challenge from a data representation learning perspective, we introduce SuperFlow, a novel framework designed to harness consecutive LiDAR-camera pairs for establishing spatiotemporal pretraining objectives. SuperFlow stands out by integrating two key designs: 1) a dense-to-sparse consistency regularization, which promotes insensitivity to point cloud density variations during feature learning, and 2) a flow-based contrastive learning module, carefully crafted to extract meaningful temporal cues from readily available sensor calibrations. To further boost learning efficiency, we incorporate a plug-and-play view consistency module that enhances the alignment of the knowledge distilled from camera views. Extensive comparative and ablation studies across 11 heterogeneous LiDAR datasets validate our effectiveness and superiority. Additionally, we observe several interesting emerging properties by scaling up the 2D and 3D backbones during pretraining, shedding light on the future research of 3D foundation models for LiDAR-based perception.

cs.CV↗

arXiv2024

Cooperative Sentiment Agents for Multimodal Sentiment Analysis

In this paper, we propose a new Multimodal Representation Learning (MRL) method for Multimodal Sentiment Analysis (MSA), which facilitates the adaptive interaction between modalities through Cooperative Sentiment Agents, named Co-SA. Co-SA comprises two critical components: the Sentiment Agents Establishment (SAE) phase and the Sentiment Agents Cooperation (SAC) phase. During the SAE phase, each sentiment agent deals with an unimodal signal and highlights explicit dynamic sentiment variations within the modality via the Modality-Sentiment Disentanglement (MSD) and Deep Phase Space Reconstruction (DPSR) modules. Subsequently, in the SAC phase, Co-SA meticulously designs task-specific interaction mechanisms for sentiment agents so that coordinating multimodal signals to learn the joint representation. Specifically, Co-SA equips an independent policy model for each sentiment agent that captures significant properties within the modality. These policies are optimized mutually through the unified reward adaptive to downstream tasks. Benefitting from the rewarding mechanism, Co-SA transcends the limitation of pre-defined fusion modes and adaptively captures unimodal properties for MRL in the multimodal interaction setting. To demonstrate the effectiveness of Co-SA, we apply it to address Multimodal Sentiment Analysis (MSA) and Multimodal Emotion Recognition (MER) tasks. Our comprehensive experimental results demonstrate that Co-SA excels at discovering diverse cross-modal features, encompassing both common and complementary aspects. The code can be available at https://github.com/smwanghhh/Co-SA.

cs.CL↗

arXiv2023

FRNet: Frustum-Range Networks for Scalable LiDAR Segmentation

LiDAR segmentation has become a crucial component of advanced autonomous driving systems. Recent range-view LiDAR segmentation approaches show promise for real-time processing. However, they inevitably suffer from corrupted contextual information and rely heavily on post-processing techniques for prediction refinement. In this work, we propose FRNet, a simple yet powerful method aimed at restoring the contextual information of range image pixels using corresponding frustum LiDAR points. First, a frustum feature encoder module is used to extract per-point features within the frustum region, which preserves scene consistency and is critical for point-level predictions. Next, a frustum-point fusion module is introduced to update per-point features hierarchically, enabling each point to extract more surrounding information through the frustum features. Finally, a head fusion module is used to fuse features at different levels for final semantic predictions. Extensive experiments conducted on four popular LiDAR segmentation benchmarks under various task setups demonstrate the superiority of FRNet. Notably, FRNet achieves 73.3% and 82.5% mIoU scores on the testing sets of SemanticKITTI and nuScenes. While achieving competitive performance, FRNet operates 5 times faster than state-of-the-art approaches. Such high efficiency opens up new possibilities for more scalable LiDAR segmentation. The code has been made publicly available at https://github.com/Xiangxu-0103/FRNet.

cs.CV↗

arXiv2022

Adaptive Multi-view and Temporal Fusing Transformer for 3D Human Pose Estimation

This paper proposes a unified framework dubbed Multi-view and Temporal Fusing Transformer (MTF-Transformer) to adaptively handle varying view numbers and video length without camera calibration in 3D Human Pose Estimation (HPE). It consists of Feature Extractor, Multi-view Fusing Transformer (MFT), and Temporal Fusing Transformer (TFT). Feature Extractor estimates 2D pose from each image and fuses the prediction according to the confidence. It provides pose-focused feature embedding and makes subsequent modules computationally lightweight. MFT fuses the features of a varying number of views with a novel Relative-Attention block. It adaptively measures the implicit relative relationship between each pair of views and reconstructs more informative features. TFT aggregates the features of the whole sequence and predicts 3D pose via a transformer. It adaptively deals with the video of arbitrary length and fully unitizes the temporal information. The migration of transformers enables our model to learn spatial geometry better and preserve robustness for varying application scenarios. We report quantitative and qualitative results on the Human3.6M, TotalCapture, and KTH Multiview Football II. Compared with state-of-the-art methods with camera parameters, MTF-Transformer obtains competitive results and generalizes well to dynamic capture with an arbitrary number of unseen views.

cs.CV↗