arXiv subjects

Hui-Hai Zhao

Publications and source records attributed to Hui-Hai Zhao.

At least 19 recordsLinked to original sources

arXiv2026

SesQ: A Surface Electrostatic Simulator for Precise Energy Participation Ratio Simulation in Superconducting Qubits

An accurate and efficient numerical electromagnetic model for superconducting qubits is essential for characterizing and minimizing design-dependent dielectric losses. The energy participation ratio (EPR) is the commonly adopted metric used to evaluate these losses, but its calculation presents a severe multiscale computational challenge. Conventional finite element method (FEM) requires 3D volumetric meshing, leading to prohibitive computational costs and memory requirements when attempting to capture singular electric fields at nanometer-thin material interfaces. To address this bottleneck, we propose SesQ, a surface integral equation simulator tailored for the precise simulation of the EPR. By applying discretization on 2D surfaces, deriving a semi-analytical multilayer Green's function, and employing a dedicated non-conformal boundary mesh refinement scheme, SesQ accurately resolves singular edge fields without an explosive growth in the number of unknowns. Validations with analytically solvable models demonstrate that SesQ accelerates capacitance extraction by roughly two orders of magnitude compared to commercial FEM tools. While achieving comparable accuracy for capacitance extraction, SesQ delivers superior precision for EPR calculation. Simulations of practical transmon qubits further reveal that FEM approaches tend to significantly underestimate the EPR. Finally, the high efficiency of SesQ enables rapid iteration in the layout optimization, as demonstrated by minimizing the EPR of the qubit pattern, establishing the simulator as a powerful tool for the automated design of low-loss superconducting quantum circuits.

quant-ph↗

arXiv2026

Routing-based technique for defect mitigation in quantum error correction

As quantum chips scale up for large-scale computation, hardware defects become inevitable and must be carefully addressed. In this work, we introduce Halma, a defect mitigation technique empowered by an expanded native gate set that incorporates the iSWAP gate alongside the conventional CNOT gate. Halma emerges as a supplementary technique within the defect mitigation toolbox, offering effective mitigation of ancilla qubit defects encountered during surface code stabilizer measurements while maintaining compatibility with existing superstabilizer-based methodologies. Halma introduces zero reduction in the spacelike distance of the code without further sacrifice to the timelike distance. Numerical simulation suggests that in comparison to previous methods, Halma could provide an order of magnitude improvement in the average logical error rate under realistic experimental settings, leading to a $\sim3\times$ reduction in the footprint of a teraquop. These results clearly demonstrate the capability of Halma in easing the near-term realization of fault-tolerant quantum computing on hardware with fabrication defects, and exemplifies how leveraging intrinsic hardware capabilities can enhance quantum hardware performance.

quant-ph↗

arXiv2026

SurgeQ: A Hybrid Framework for Ultra-Fast Quantum Processor Design and Crosstalk-Aware Circuit Execution

Executing quantum circuits on superconducting platforms requires balancing the trade-off between gate errors and crosstalk. To address this, we introduce SurgeQ, a hardware-software co-design strategy consisting of a design phase and an execution phase, to achieve accelerated circuit execution and improve overall program fidelity. SurgeQ employs coupling-strengthened, faster two-qubit gates while mitigating their increased crosstalk through a tailored scheduling strategy. With detailed consideration of composite noise models, we establish a systematic evaluation pipeline to identify the optimal coupling strength. Evaluations on a comprehensive suite of real-world benchmarks show that SurgeQ generally achieves higher fidelity than up-to-date baselines, and remains effective in combating exponential fidelity decay, achieving up to a million-fold improvement in large-scale circuits.

quant-ph↗

arXiv2025

Identify and Quantify Various Dissipation Mechanisms of Josephson Junction in Superconducting Circuits

Pinpointing the dissipation mechanisms and evaluating their impacts to the performance of Josephson junction (JJ) are crucial for its application in superconducting circuits. In this work, we demonstrate the junction-embedded resonator (JER) as a platform which enables us to identify and quantify various dissipation mechanisms of JJ. JER is constructed by embedding JJ in the middle of an open-circuit, 1/2 λ transmission-line resonator. When the 1st and 2nd harmonics of JER are excited, JJ experiences different boundary conditions, and is dominated by internal and external dissipations, respectively. We systematically study these 2 dissipation mechanisms of JJ by varying the JJ area and number. Our results unveil the completely different behaviors of these 2 dissipation mechanisms, and quantitatively characterize their contributions, shedding a light on the direction of JJ optimization in various applications.

quant-ph↗

arXiv2025

Quantum Design Automation: Foundations, Challenges, and the Road Ahead

Quantum computing is transitioning from laboratory research to industrial deployment, yet significant challenges persist: system scalability and performance, fabrication yields, and the advancement of algorithms and applications. We emphasize that in building quantum computers -- spanning quantum chips, system integration, instruction sets, algorithms, and middleware such as quantum error correction schemes -- design is everywhere. In this paper, we advocate for a holistic design perspective in quantum computing, a perspective we argue is pivotal to unlocking innovative co-design opportunities and addressing the aforementioned key challenges. To equip readers with sufficient background for exploring co-optimization opportunities, we detail how interconnected computational methods and tools collaborate to enable end-to-end quantum computer design. This coverage encompasses critical stages -- such as chip layout design automation, high-fidelity system-level simulation, Hamiltonian derivation for quantum system modeling, control pulse simulation, decoherence analysis, and physical verification and testing -- followed by quantum instruction set design. We then proceed to quantum system and software development, including quantum circuit synthesis, quantum error correction and fault tolerance, and logic verification and testing. Through these discussions, we illustrate with concrete examples -- including co-optimizing quantum instruction sets with algorithmic considerations, customizing error correction circuits to hardware-specific constraints, and streamlining quantum chip design through tailored code design, among others. We hope that the detailed end-to-end design workflow as well as these examples will foster dialogue between the hardware and software communities, ultimately facilitating the translation of meaningful research findings into future quantum hardware implementations.

quant-ph↗

arXiv2025

Louvre: Relaxing Hardware Requirements of Quantum LDPC Codes by Routing with Expanded Quantum Instruction Set

Generalized bicycle codes (GB codes) represent a promising family of quantum low-density parity-check codes, characterized by high code rates and relatively local qubit connectivity. A subclass of the GB code called bivariate bicycle codes (BB codes) has garnered significant interest due to their compatibility with two-layer connectivity architectures on superconducting quantum processors. However, one key limitation of BB codes is their high qubit connectivity degree requirements (degree 6), which exacerbates the noise susceptibility of the system. Building on the recent progress in implementing multiple two-qubit gates on a single chip, this work introduces Louvre -- a routing-based framework designed to reduce qubit connectivity requirements in GB codes. Specifically, Louvre-7 achieves degree reduction while preserving the depth of the syndrome extraction circuit, whereas Louvre-8 further minimizes the connectivity by slightly increasing the circuit depth. When applied to BB codes, these two schemes could reduce the average degree to 4.5 and 4, respectively. Crucially, Louvre eliminates some of the long-range, error-prone connections, which is a distinct advantage over prior approaches. Numerical simulations demonstrate that Louvre-7 has an indistinguishable logical error rate as the standard syndrome extraction circuits of GB codes, while Louvre-8 only incurs a slight error rate penalty. Furthermore, by reordering some of the gates in the circuit, we can reduce the coupler length without degrading the performance. Though most of our analysis focuses on GB codes defined on periodic boundary conditions, we further discuss the adaptability of Louvre to open-boundary lattices and defect-containing grids, underscoring its broader applicability in practical quantum error correction architectures.

quant-ph↗

arXiv2025

High coherence fluxonium manufactured with a wafer-scale uniformity process

Fluxonium qubits are recognized for their high coherence times and high operation fidelities, attributed to their unique design incorporating a superinductor, which is typically implemented using an array of over 100 Josephson junctions. However, this complexity poses significant fabrication challenges, particularly in achieving high yield and junction uniformity with traditional methods. Here, we introduce an overlap process for Josephson junction fabrication that achieves nearly 100% yield and maintains uniformity across a 2-inch wafer with less than 5% variation for the phase slip junction and less than 2% for the entire junction array. We use a compact junction array design that achieves state-of-the-art dielectric loss tangents and flux noise levels, as confirmed by multiple devices. This enables fluxonium qubits to reach energy relaxation times exceeding 1 millisecond at the flux frustration point. This work paves the way for scalable high coherence fluxonium processors using CMOS-compatible processes, marking a significant step towards practical quantum computing.

quant-ph↗

arXiv2025

SuperGrad: a differentiable simulator for superconducting processors

One significant advantage of superconducting processors is their extensive design flexibility, which encompasses various types of qubits and interactions. Given the large number of tunable parameters of a processor, the ability to perform gradient optimization would be highly beneficial. Efficient backpropagation for gradient computation requires a tightly integrated software library, for which no open-source implementation is currently available. In this work, we introduce SuperGrad, a simulator that accelerates the design of superconducting quantum processors by incorporating gradient computation capabilities. SuperGrad offers a user-friendly interface for constructing Hamiltonians and computing both static and dynamic properties of composite systems. This differentiable simulation is valuable for a range of applications, including optimal control, design optimization, and experimental data fitting. In this paper, we demonstrate these applications through examples and code snippets.

quant-ph↗

arXiv2025

The effects of disorder in superconducting materials on qubit coherence

Introducing disorderness in the superconducting materials has been considered promising to enhance the electromagnetic impedance and realize noise-resilient superconducting qubits. Despite a number of pioneering implementations, the understanding of the correlation between the material disorderness and the qubit coherence is still developing. Here, we demonstrate a systematic characterization of fluxonium qubits with the superinductors made from titanium-aluminum-nitride with varied disorderness. From qubit noise spectroscopy, the flux noise and the dielectric loss are extracted as a measure of the coherence properties. Our results reveal that the $1/f$ flux noise dominates the qubit decoherence around the flux-frustration point, strongly correlated with the material disorderness; while the dielectric loss remains low under a wide range of material properties. From the flux-noise amplitudes, the areal density ($σ$) of the phenomenological spin defects and material disorderness are found to be approximately correlated by $σ\propto ρ_{xx}^3$, or effectively $(k_F l)^{-3}$. This work has provided new insights on the origin of decoherence channels within superconductors, and could serve as a useful guideline for material design and optimization.

quant-ph↗

arXiv2024

Efficient initialization of fluxonium qubits based on auxiliary energy levels

Fast and high-fidelity qubit initialization is crucial for low-frequency qubits such as fluxonium, and in applications of many quantum algorithms and quantum error correction codes. In a circuit quantum electrodynamics system, the initialization is typically achieved by transferring the state between the qubit and a short-lived cavity through microwave driving, also known as the sideband cooling process in atomic system. Constrained by the selection rules from the parity symmetry of the wavefunctions, the sideband transitions are only enabled by multi-photon processes which requires multi-tone or strong driving. Leveraging the flux-tunability of fluxonium, we circumvent this limitation by breaking flux symmetry to enable an interaction between a non-computational qubit transition and the cavity excitation. With single-tone sideband driving, we realize qubit initialization with a fidelity exceeding 99% within a duration of 300 ns, robust against the variation of control parameters. Furthermore, we show that our initialization scheme has a built-in benefit in simultaneously removing the second-excited state population of the qubit, and can be easily incorporated into a large-scale fluxonium processor.

quant-ph↗

arXiv2023

Ultrahigh-inductance materials from spinodal decomposition

Disordered superconducting nitrides with kinetic inductance have long been considered a leading material candidate for high-inductance quantum-circuit applications. Despite continuing efforts in reducing material dimensions to increase the kinetic inductance and the corresponding circuit impedance, it becomes a fundamental challenge to improve further without compromising material qualities. To this end, we propose a method to drastically increase the kinetic inductance of superconducting materials via spinodal decomposition while keeping a low microwave loss. We use epitaxial Ti\textsubscript{0.48}Al\textsubscript{0.52}N as a model system, and for the first time demonstrate the utilization of spinodal decomposition to trigger the insulator-to-superconductor transition with a drastically enhanced material disorder. The measured kinetic inductance has increased by 2-3 orders of magnitude compared with all the best reported disordered superconducting nitrides. Our work paves the way for substantially enhancing and deterministically controlling the inductance for advanced superconducting quantum circuits.

quant-ph↗

arXiv2023

Native approach to controlled-Z gates in inductively coupled fluxonium qubits

The fluxonium qubits have emerged as a promising platform for gate-based quantum information processing. However, their extraordinary protection against charge fluctuations comes at a cost: when coupled capacitively, the qubit-qubit interactions are restricted to XX-interactions. Consequently, effective XX- or XZ-interactions are only constructed either by temporarily populating higher-energy states, or by exploiting perturbative effects under microwave driving. Instead, we propose and demonstrate an inductive coupling scheme, which offers a wide selection of native qubit-qubit interactions for fluxonium. In particular, we leverage a built-in, flux-controlled ZZ-interaction to perform qubit entanglement. To combat the increased flux-noise-induced dephasing away from the flux-insensitive position, we use a continuous version of the dynamical decoupling scheme to perform noise filtering. Combining these, we demonstrate a 20 ns controlled-Z (CZ) gate with a mean fidelity of 99.53%. More than confirming the efficacy of our gate scheme, this high-fidelity result also reveals a promising but rarely explored parameter space uniquely suitable for gate operations between fluxonium qubits.

quant-ph↗

arXiv2023

Characterization of loss mechanisms in a fluxonium qubit

Using a fluxonium qubit with in situ tunability of its Josephson energy, we characterize its energy relaxation at different flux biases as well as different Josephson energy values. The relaxation rate at qubit energy values, ranging more than one order of magnitude around the thermal energy $k_B T$, can be quantitatively explained by a combination of dielectric loss and $1/f$ flux noise with a crossover point. The amplitude of the $1/f$ flux noise is consistent with that extracted from the qubit dephasing measurements at the flux sensitive points. In the dielectric loss dominant regime, the loss is consistent with that arises from the electric dipole interaction with two-level-system (TLS) defects. In particular, as increasing Josephson energy thus decreasing qubit frequency at the flux insensitive spot, we find that the qubit exhibits increasingly weaker coupling to TLS defects thus desirable for high-fidelity quantum operations.

quant-ph↗

arXiv2022

Quantum Instruction Set Design for Performance

A quantum instruction set is where quantum hardware and software meet. We develop new characterization and compilation techniques for non-Clifford gates to accurately evaluate different quantum instruction set designs. We specifically apply them to our fluxonium processor that supports mainstream instruction $\mathrm{iSWAP}$ by calibrating and characterizing its square root $\mathrm{SQiSW}$. We measure a gate fidelity of up to $99.72\%$ with an average of $99.31\%$ and realize Haar random two-qubit gates using $\mathrm{SQiSW}$ with an average fidelity of $96.38\%$. This is an average error reduction of $41\%$ for the former and a $50\%$ reduction for the latter compared to using $\mathrm{iSWAP}$ on the same processor. This shows designing the quantum instruction set consisting of $\mathrm{SQiSW}$ and single-qubit gates on such platforms leads to a performance boost at almost no cost.

quant-ph↗

arXiv2022

Titanium Nitride Film on Sapphire Substrate with Low Dielectric Loss for Superconducting Qubits

Dielectric loss is one of the major decoherence sources of superconducting qubits. Contemporary high-coherence superconducting qubits are formed by material systems mostly consisting of superconducting films on substrate with low dielectric loss, where the loss mainly originates from the surfaces and interfaces. Among the multiple candidates for material systems, a combination of titanium nitride (TiN) film and sapphire substrate has good potential because of its chemical stability against oxidization, and high quality at interfaces. In this work, we report a TiN film deposited onto sapphire substrate achieving low dielectric loss at the material interface. Through the systematic characterizations of a series of transmon qubits fabricated with identical batches of TiN base layers, but different geometries of qubit shunting capacitors with various participation ratios of the material interface, we quantitatively extract the loss tangent value at the substrate-metal interface smaller than $8.9 \times 10^{-4}$ in 1-nm disordered layer. By optimizing the interface participation ratio of the transmon qubit, we reproducibly achieve qubit lifetimes of up to 300 $μ$s and quality factors approaching 8 million. We demonstrate that TiN film on sapphire substrate is an ideal material system for high-coherence superconducting qubits. Our analyses further suggest that the interface dielectric loss around the Josephson junction part of the circuit could be the dominant limitation of lifetimes for state-of-the-art transmon qubits.

quant-ph↗

arXiv2021

Integrating Quantum Processor Device and Control Optimization in a Gradient-based Framework

In a quantum processor, the device design and external controls together contribute to the quality of the target quantum operations. As we continuously seek better alternative qubit platforms, we explore the increasingly large device and control design space. Thus, optimization becomes more and more challenging. In this work, we demonstrate that the figure of merit reflecting a design goal can be made differentiable with respect to the device and control parameters. In addition, we can compute the gradient of the design objective efficiently in a similar manner to the back-propagation algorithm and then utilize the gradient to optimize the device and the control parameters jointly and efficiently. This extends the scope of the quantum optimal control to superconducting device design. We also demonstrate the viability of gradient-based joint optimization over the device and control parameters through a few examples.

quant-ph↗

arXiv2021

Fluxonium: an alternative qubit platform for high-fidelity operations

Superconducting qubits provide a promising path toward building large-scale quantum computers. The simple and robust transmon qubit has been the leading platform, achieving multiple milestones. However, fault-tolerant quantum computing calls for qubit operations at error rates significantly lower than those exhibited in the state of the art. Consequently, alternative superconducting qubits with better error protection have attracted increasing interest. Among them, fluxonium is a particularly promising candidate, featuring large anharmonicity and long coherence times. Here, we engineer a fluxonium-based quantum processor that integrates high qubit-coherence, fast frequency-tunability, and individual-qubit addressability for reset, readout, and gates. With simple and fast gate schemes, we achieve an average single-qubit gate fidelity of 99.97% and a two-qubit gate fidelity of up to 99.72%. This performance is comparable to the highest values reported in the literature of superconducting circuits. Thus our work, for the first time within the realm of superconducting qubits, reveals an approach toward fault-tolerant quantum computing that is alternative and competitive to the transmon system.

quant-ph↗

arXiv2021

Free Mode Removal and Mode Decoupling for Simulating General Superconducting Quantum Circuits

Superconducting quantum circuits is one of the leading candidates for a universal quantum computer. Designing novel qubit and multiqubit superconducting circuits requires the ability to simulate and analyze the properties of a general circuit. In particular, going outside the transmon approach, we cannot make assumptions on anharmonicity, thus precluding blackbox quantization approaches and necessitating the formal circuit quantization approach. We consider and solve two issues involved in simulating general superconducting circuits. One of the issues is the handling of free modes in the circuit, that is, circuit modes with no potential term in the Hamiltonian. Another issue is circuit size, namely the challenge of simulating strongly coupled multimode circuits. The main mathematical tool we use to address these issues is the linear canonical transformation in the setting of quantum mechanics. We address the first issue by giving a provably correct algorithm for removing free modes by performing a linear canonical transformation to completely decouple the free modes from other circuit modes. We address the second by giving a series of different linear canonical transformations to reduce intermode couplings, thereby reducing the problem to the weakly coupled case and greatly mitigating the overhead for classical simulation. We benchmark our decoupling methods by applying them to the circuit of two inductively coupled fluxonium qubits, obtaining several orders of magnitude reduction in the size of the Hilbert space that needs to be simulated.

quant-ph↗