arXiv subjects

Huihuan Qian

Publications and source records attributed to Huihuan Qian.

14 recordsLinked to original sources

arXiv2026

Design and Control of the "QuadBoat": A Quadruped Surface Vehicle for Drowning Rescue

Prompt extraction of victims from water is crucial in water surface rescue missions. However, previous research on rescue robots has seldom addressed this issue. This paper presents QuadBoat, a bio-inspired unmanned surface vehicle (USV) designed to track and retrieve victims from water. QuadBoat features a quadrupedal robot configuration, enabling it with highly adaptable and agile maneuverability through its actively adjustable posture. Employing an inverse kinematics-based controller and cascaded model predictive control (MPC)-PID controller for overall movement, QuadBoat can accurately track and retrieve objects on the water surface. Maneuverability demonstrations validate QuadBoat's high agility, while a series of tracking experiments, including leg action tracking and trajectory tracking, confirm its high motion accuracy and system mobility. Finally, visual-based tracking and object pickup experiments further verify QuadBoat's target tracking capabilities and its effectiveness in executing rescues, both indoors and outdoors.

cs.RO↗

arXiv2025

Neural Network Aided Kalman Filtering with Model Predictive Control Enables Robot-Assisted Drone Recovery on a Wavy Surface

Recovering a drone on a disturbed water surface remains a significant challenge in maritime robotics. In this paper, we propose a unified framework for robot-assisted drone recovery on a wavy surface that addresses two major tasks: Firstly, accurate prediction of a moving drone's position under wave-induced disturbances using KalmanNet Plus Plus (KalmanNet++), a Neural Network Aided Kalman Filtering we proposed. Secondly, effective motion planning using the desired position we got for a manipulator via Receding Horizon Model Predictive Control (RHMPC). Specifically, we compared multiple prediction methods and proposed KalmanNet Plus Plus to predict the position of the UAV, thereby obtaining the desired position. The KalmanNet++ predicts the drone's future position 0.1\,s ahead, while the manipulator plans a capture trajectory in real time, thus overcoming not only wave-induced base motions but also limited constraints such as torque constraints and joint constraints. For the system design, we provide a collaborative system, comprising a manipulator subsystem and a UAV subsystem, enables drone lifting and drone recovery. Simulation and real-world experiments using wave-disturbed motion data demonstrate that our approach achieves a high success rate - above 95\% and outperforms conventional baseline methods by up to 10\% in efficiency and 20\% in precision. The results underscore the feasibility and robustness of our system, which achieves state-of-the-art performance and offers a practical solution for maritime drone operations.

cs.RO↗

arXiv2024

Parallel Self-assembly for a Multi-USV System on Water Surface with Obstacles

Parallel self-assembly is an efficient approach to accelerate the assembly process for modular robots. However, these approaches cannot accommodate complicated environments with obstacles, which restricts their applications. This paper considers the surrounding stationary obstacles and proposes a parallel self-assembly planning algorithm named SAPOA. With this algorithm, modular robots can avoid immovable obstacles when performing docking actions, which adapts the parallel self-assembly process to complex scenes. To validate the efficiency and scalability, we have designed 25 distinct grid maps with different obstacle configurations to simulate the algorithm. From the results compared to the existing parallel self-assembly algorithms, our algorithm shows a significantly higher success rate, which is more than 80%. For verification in real-world applications, a multi-agent hardware testbed system is developed. The algorithm is successfully deployed on four omnidirectional unmanned surface vehicles, CuBoats. The navigation strategy that translates the discrete planner, SAPOA, to the continuous controller on the CuBoats is presented. The algorithm's feasibility and flexibility were demonstrated through successful self-assembly experiments on 5 maps with varying obstacle configurations.

cs.RO↗

arXiv2024

Parallel Self-assembly for Modular USVs with Diverse Docking Mechanism Layouts

Self-assembly enables multi-robot systems to merge diverse capabilities and accomplish tasks beyond the reach of individual robots. Incorporating varied docking mechanisms layouts (DMLs) can enhance robot versatility or reduce costs. However, assembling multiple heterogeneous robots with diverse DMLs is still a research gap. This paper addresses this problem by introducing CuBoat, an omnidirectional unmanned surface vehicle (USV). CuBoat can be equipped with or without docking systems on its four sides to emulate heterogeneous robots. We implement a multi-robot system based on multiple CuBoats. To enhance maneuverability, a linear active disturbance rejection control (LADRC) scheme is proposed. Additionally, we present a generalized parallel self-assembly planning algorithm for efficient assembly among CuBoats with different DMLs. Validation is conducted through simulation within 2 scenarios across 4 distinct maps, demonstrating the performance of the self-assembly planning algorithm. Moreover, trajectory tracking tests confirm the effectiveness of the LADRC controller. Self-assembly experiments on 5 maps with different target structures affirm the algorithm's feasibility and generality. This study advances robotic self-assembly, enabling multi-robot systems to collaboratively tackle complex tasks beyond the capabilities of individual robots.

cs.RO↗

arXiv2023

Design and Verification of a Novel Triphibian Robot

Multi-modal robots expand their operations from one working medium to another, land to air for example. The majorities of multi-modal robots mainly refer to platforms that operate in two different media. However, for all-terrain tasks, there are seldom research to date in the literature. Generally, locomotions in different working media, i.e. land, water and air, require different propelling actuators, and thus the triphibian system becomes bulky. To overcome this challenge, we proposed a triphibian robot and provide the robot with driving forces to perform all-terrain operations in an efficient way. A morphable mechanism is designed to enable the transition between different motion modes, and specifically a cylindrical body is implemented as the rolling mechanism in land mode. Detailed design principles of different mechanisms and the transition between various locomotion modes are analyzed. Finally, a triphibian robot prototype is fabricated and tested in various working media with both mono-modal and multi-modal functionalities. Experiments have verified our platform, and the results show promising adaptions in future exploration tasks in various working scenarios.

cs.RO↗

arXiv2023

A Manipulator-Assisted Multiple UAV Landing System for USV Subject to Disturbance

Marine waves significantly disturb the unmanned surface vehicle (USV) motion. An unmanned aerial vehicle (UAV) can hardly land on a USV that undergoes irregular motion. An oversized landing platform is usually necessary to guarantee the landing safety, which limits the number of UAVs that can be carried. We propose a landing system assisted by tether and robot manipulation. The system can land multiple UAVs without increasing the USV's size. An MPC controller stabilizes the end-effector and tracks the UAVs, and an adaptive estimator addresses the disturbance caused by the base motion. The working strategy of the system is designed to plan the motion of each device. We have validated the manipulator controller through simulations and well-controlled indoor experiments. During the field tests, the proposed system caught and placed the UAVs when the disturbed USV roll range was approximately 12 degrees.

cs.RO↗

arXiv2022

Design and Control of the "TransBoat": A Transformable Unmanned Surface Vehicle for Overwater Construction

This paper presents the TransBoat, a novel omnidirectional unmanned surface vehicle (USV) with a magnetbased docking system for overwater construction with wave disturbances. This is the first such USV that can build overwater structures by transporting modules. The TransBoat incorporates two features designed to reject wave disturbances. First, the TransBoat's expandable body structure can actively transform from a mono-hull into a multi-hull for stabilization in turbulent environments by extending its four outrigger hulls. Second, a real-time nonlinear model predictive control (NMPC) scheme is proposed for all shapes of the TransBoat to enhance its maneuverability and resist disturbance to its movement, based on a nonlinear dynamic model. An experimental approach is proposed to identify the parameters of the dynamic model, and a subsequent trajectory tracking test validates the dynamics, NMPC controller and system mobility. Further, docking experiments identify improved performance in the expanded form of the TransBoat compared with the contracted form, including an increased success rate (of ~ 10%) and reduced docking time (of ~ 40 s on average). Finally, a bridge construction test verifies our system design and the NMPC control method.

cs.RO↗

arXiv2022

A Novel Autonomous Robotics System for Aquaculture Environment Monitoring

Implementing fully automatic unmanned surface vehicles (USVs) monitoring water quality is challenging since effectively collecting environmental data while keeping the platform stable and environmental-friendly is hard to approach. To address this problem, we construct a USV that can automatically navigate an efficient path to sample water quality parameters in order to monitor the aquatic environment. The detection device needs to be stable enough to resist a hostile environment or climates while enormous volumes will disturb the aquaculture environment. Meanwhile, planning an efficient path for information collecting needs to deal with the contradiction between the restriction of energy and the amount of information in the coverage region. To tackle with mentioned challenges, we provide a USV platform that can perfectly balance mobility, stability, and portability attributed to its special round-shape structure and redundancy motion design. For informative planning, we combined the TSP and CPP algorithms to construct an optimistic plan for collecting more data within a certain range and limiting energy restrictions.We designed a fish existence prediction scenario to verify the novel system in both simulation experiments and field experiments. The novel aquaculture environment monitoring system significantly reduces the burden of manual operation in the fishery inspection field. Additionally, the simplicity of the sensor setup and the minimal cost of the platform enables its other possible applications in aquatic exploration and commercial utilization.

cs.RO↗

arXiv2018

Design and Control of A Hybrid Sailboat for Enhanced Tacking Maneuver

Sailing robots provide a low-cost solution to conduct the ocean missions such as marine exploration, pollution detection, and border surveillance, etc. However, compared with other propeller-driven surface vessels, sailboat suffers in complex marine wind field due to its low mobility. Especially in tacking, sailboats are required to head upwind, and need to make a zig-zag path. In this trajectory, a series of turnings, which will cross the challenging no-go zone, place significant challenge as it will reduce speed greatly and consequently result in unsuccessful turning. This paper presents a hybrid sailboat design to solve this issue. Electric propellers and control system are added to a model sailboat. We have further designed the control strategy and tuned the parameters (PWM-time) experimentally. Finally, the system and control can complete the tacking maneuver with average speed approximately 10% higher and enhanced success rate, though the sailboat weight is much heavier.

cs.RO↗

arXiv2018

Energy Optimization of Automatic Hybrid Sailboat

Autonomous Surface Vehicles (ASVs) provide an effective way to actualize applications such as environment monitoring, search and rescue, and scientific researches. However, the conventional ASVs depends overly on the stored energy. Hybrid Sailboat, mainly powered by the wind, can solve this problem by using an auxiliary propulsion system. The electric energy cost of Hybrid Sailboat needs to be optimized to achieve the ocean automatic cruise mission. Based on adjusted setting on sails and rudders, this paper seeks the optimal trajectory for autonomic cruising to reduce the energy cost by changing the heading angle of sailing upwind. The experiment results validate the heading angle accounts for energy cost and the trajectory with the best heading angle saves up to 23.7% than other conditions. Furthermore, the energy-time line can be used to predict the energy cost for long-time sailing.

cs.RO↗

arXiv2018

Vehicle Pose and Shape Estimation through Multiple Monocular Vision

In this paper, we present an accurate approach to estimate vehicles' pose and shape from off-board multiview images. The images are taken by monocular cameras and have small overlaps. We utilize state-of-the-art convolutional neural networks (CNNs) to extract vehicles' semantic keypoints and introduce a Cross Projection Optimization (CPO) method to estimate the 3D pose. During the iterative CPO process, an adaptive shape adjustment method named Hierarchical Wireframe Constraint (HWC) is implemented to estimate the shape. Our approach is evaluated under both simulated and real-world scenes for performance verification. It's shown that our algorithm outperforms other existing monocular and stereo methods for vehicles' pose and shape estimation. This approach provides a new and robust solution for off-board visual vehicle localization and tracking, which can be applied to massive surveillance camera networks for intelligent transportation.

cs.CV↗

arXiv2018

The Newton Scheme for Deep Learning

We introduce a neural network (NN) strictly governed by Newton's Law, with the nature required basis functions derived from the fundamental classic mechanics. Then, by classifying the training model as a quick procedure of 'force pattern' recognition, we developed the Newton physics-based NS scheme. Once the force pattern is confirmed, the neuro network simply does the checking of the 'pattern stability' instead of the continuous fitting by computational resource consuming big data-driven processing. In the given physics's law system, once the field is confirmed, the mathematics bases for the force field description actually are not diverged but denumerable, which can save the function representations from the exhaustible available mathematics bases. In this work, we endorsed Newton's Law into the deep learning technology and proposed Newton Scheme (NS). Under NS, the user first identifies the path pattern, like the constant acceleration movement.The object recognition technology first loads mass information, then, the NS finds the matched physical pattern and describe and predict the trajectory of the movements with nearly zero error. We compare the major contribution of this NS with the TCN, GRU and other physics inspired 'FIND-PDE' methods to demonstrate fundamental and extended applications of how the NS works for the free-falling, pendulum and curve soccer balls.The NS methodology provides more opportunity for the future deep learning advances.

cs.LG↗

arXiv2018

Hierarchical Reinforcement Learning Framework towards Multi-agent Navigation

In this paper, we propose a navigation algorithm oriented to multi-agent environment. This algorithm is expressed as a hierarchical framework that contains a Hidden Markov Model (HMM) and a Deep Reinforcement Learning (DRL) structure. For simplification, we term our method Hierarchical Navigation Reinforcement Network (HNRN). In high- level architecture, we train an HMM to evaluate the agent's perception to obtain a score. According to this score, adaptive control action will be chosen. While in low-level architecture, two sub-systems are introduced, one is a differential target- driven system, which aims at heading to the target; the other is a collision avoidance DRL system, which is used for avoiding dynamic obstacles. The advantage of this hierarchical structure is decoupling the target-driven and collision avoidance tasks, leading to a faster and more stable model to be trained. The experiments indicate that our algorithm has higher learning efficiency and rate of success than traditional Velocity Obstacle (VO) algorithms or hybrid DRL method.

cs.RO↗

arXiv2018

Monocular Vision-based Vehicle Localization Aided by Fine-grained Classification

Monocular camera systems are prevailing in intelligent transportation systems, but by far they have rarely been used for dimensional purposes such as to accurately estimate the localization information of a vehicle. In this paper, we show that this capability can be realized. By integrating a series of advanced computer vision techniques including foreground extraction, edge and line detection, etc., and by utilizing deep learning networks for fine-grained vehicle model classification, we developed an algorithm which can estimate vehicles location (position, orientation and boundaries) within the environment down to 3.79 percent position accuracy and 2.5 degrees orientation accuracy. With this enhancement, current massive surveillance camera systems can potentially play the role of e-traffic police and trigger many new intelligent transportation applications, for example, to guide vehicles for parking or even for autonomous driving.

cs.RO↗