arXiv subjects

Huijuan Zhan

Publications and source records attributed to Huijuan Zhan.

7 recordsLinked to original sources

arXiv2026

Unified Flux Control Architecture for Fluxonium Qubits

Control architectures that reduce hardware overhead while maintaining high-fidelity operations are essential for the continued scaling of superconducting quantum processors. Here we experimentally realize a unified control architecture for fluxonium qubits, in which both transverse ($XY$) and longitudinal ($Z$) operations are implemented through a single flux-control channel driven by a single arbitrary waveform generator channel. This architecture imposes competing requirements on the shared control channel, which must simultaneously support low-frequency flux transmission for reset operations while strongly attenuating broadband noise near the qubit transition frequency. We address this challenge through frequency-selective cryogenic filtering together with compensated waveform synthesis that corrects the pulse distortion introduced by the filtered control line. Experimentally, this approach preserves coherence times above 100 $μ$s while enabling active reset with approximately 98% fidelity and 20-ns single-qubit gates with fidelities exceeding 99.99%. We further demonstrate FPGA-native instruction-level waveform synthesis based on reusable pulse primitives for unified flux control. These results establish unified flux control as a scalable architecture for fluxonium qubits that reduces control hardware overhead while preserving high-fidelity operation.

quant-ph↗

arXiv2026

Millikelvin digital-to-analog converter for superconducting quantum processors

Scaling superconducting quantum processors is increasingly constrained by the wiring, heat load, and calibration overhead associated with delivering high-resolution analog signals from room temperature to qubits at millikelvin temperature. Here we demonstrate a superconducting digital-to-analog converter (DAC) integrated with high-coherence fluxonium qubits in a multi-chip module architecture. The DACs generate persistent analog flux signals for tuning qubit parameters and are programmed deterministically using single-flux-quantum (SFQ) pulses, providing a digital interface compatible with established SFQ routing and demultiplexing technologies. Operating at millikelvin temperature, the DACs enable in-situ tuning of fluxonium qubits without measurable degradation of qubit coherence. The presented device provides a static control primitive for flux-tunable qubits, enabling parameter homogenization and eliminating the need for individual room-temperature DC bias lines. These results establish SFQ-programmable millikelvin DACs as a building block for digitally controlled superconducting quantum processors.

quant-ph↗

arXiv2026

Scalable Fluxonium Quantum Processors via Tunable-Coupler Architecture

Superconducting quantum processors have largely converged on transmon-based architectures, while alternative qubit modalities with intrinsic error protection have lacked a demonstrated path to scalable system integration. In particular, although tunable-coupler-mediated interactions have been validated for small fluxonium systems, it remains unclear whether such designs can be scaled to a multi-qubit lattice. Here, we establish a scalable fluxonium processor architecture based on a modular qubit-coupler unit cell engineered to suppress residual interactions and spectator errors in a many-qubit lattice. The system enables parallel single-qubit gate fidelities approaching 99.99% and two-qubit CZ gate fidelities around 99%. With an optimized gate duration of 32 ns, the best CZ gate fidelity reaches 99.9%. We further validate this architecture in a 22-qubit processor based on the same configuration, where parallel operations enable the deterministic generation of Greenberger-Horne-Zeilinger states involving up to 10 qubits. Together, these results demonstrate that the fluxonium-tunable-coupler unit cell composes without emergent interaction pathologies and establish fluxonium as a scalable superconducting qubit platform.

quant-ph↗

arXiv2025

Identify and Quantify Various Dissipation Mechanisms of Josephson Junction in Superconducting Circuits

Pinpointing the dissipation mechanisms and evaluating their impacts to the performance of Josephson junction (JJ) are crucial for its application in superconducting circuits. In this work, we demonstrate the junction-embedded resonator (JER) as a platform which enables us to identify and quantify various dissipation mechanisms of JJ. JER is constructed by embedding JJ in the middle of an open-circuit, 1/2 λ transmission-line resonator. When the 1st and 2nd harmonics of JER are excited, JJ experiences different boundary conditions, and is dominated by internal and external dissipations, respectively. We systematically study these 2 dissipation mechanisms of JJ by varying the JJ area and number. Our results unveil the completely different behaviors of these 2 dissipation mechanisms, and quantitatively characterize their contributions, shedding a light on the direction of JJ optimization in various applications.

quant-ph↗

arXiv2025

High coherence fluxonium manufactured with a wafer-scale uniformity process

Fluxonium qubits are recognized for their high coherence times and high operation fidelities, attributed to their unique design incorporating a superinductor, which is typically implemented using an array of over 100 Josephson junctions. However, this complexity poses significant fabrication challenges, particularly in achieving high yield and junction uniformity with traditional methods. Here, we introduce an overlap process for Josephson junction fabrication that achieves nearly 100% yield and maintains uniformity across a 2-inch wafer with less than 5% variation for the phase slip junction and less than 2% for the entire junction array. We use a compact junction array design that achieves state-of-the-art dielectric loss tangents and flux noise levels, as confirmed by multiple devices. This enables fluxonium qubits to reach energy relaxation times exceeding 1 millisecond at the flux frustration point. This work paves the way for scalable high coherence fluxonium processors using CMOS-compatible processes, marking a significant step towards practical quantum computing.

quant-ph↗

arXiv2024

Efficient initialization of fluxonium qubits based on auxiliary energy levels

Fast and high-fidelity qubit initialization is crucial for low-frequency qubits such as fluxonium, and in applications of many quantum algorithms and quantum error correction codes. In a circuit quantum electrodynamics system, the initialization is typically achieved by transferring the state between the qubit and a short-lived cavity through microwave driving, also known as the sideband cooling process in atomic system. Constrained by the selection rules from the parity symmetry of the wavefunctions, the sideband transitions are only enabled by multi-photon processes which requires multi-tone or strong driving. Leveraging the flux-tunability of fluxonium, we circumvent this limitation by breaking flux symmetry to enable an interaction between a non-computational qubit transition and the cavity excitation. With single-tone sideband driving, we realize qubit initialization with a fidelity exceeding 99% within a duration of 300 ns, robust against the variation of control parameters. Furthermore, we show that our initialization scheme has a built-in benefit in simultaneously removing the second-excited state population of the qubit, and can be easily incorporated into a large-scale fluxonium processor.

quant-ph↗

arXiv2023

Native approach to controlled-Z gates in inductively coupled fluxonium qubits

The fluxonium qubits have emerged as a promising platform for gate-based quantum information processing. However, their extraordinary protection against charge fluctuations comes at a cost: when coupled capacitively, the qubit-qubit interactions are restricted to XX-interactions. Consequently, effective XX- or XZ-interactions are only constructed either by temporarily populating higher-energy states, or by exploiting perturbative effects under microwave driving. Instead, we propose and demonstrate an inductive coupling scheme, which offers a wide selection of native qubit-qubit interactions for fluxonium. In particular, we leverage a built-in, flux-controlled ZZ-interaction to perform qubit entanglement. To combat the increased flux-noise-induced dephasing away from the flux-insensitive position, we use a continuous version of the dynamical decoupling scheme to perform noise filtering. Combining these, we demonstrate a 20 ns controlled-Z (CZ) gate with a mean fidelity of 99.53%. More than confirming the efficacy of our gate scheme, this high-fidelity result also reveals a promising but rarely explored parameter space uniquely suitable for gate operations between fluxonium qubits.

quant-ph↗