arXiv subjects

Huikai Xu

Publications and source records attributed to Huikai Xu.

17 recordsLinked to original sources

arXiv2026

Vibe Calibration: Autonomous Bring-up of a 112-Qubit Superconducting Quantum Processor by a Skill-Orchestrating Language Agent

Superconducting quantum computing is one of the most mature solid-state platforms for quantum computation, with processors exceeding one hundred qubits. Yet further scaling toward fault-tolerant quantum computing is increasingly constrained by calibration complexity. Conventional scripts are brittle to anomalous signals, and expert judgment is bounded by cognitive bandwidth and serial operation time, failing to keep pace with system scale. Here we report Vibe Calibration, an autonomous calibration system orchestrated by large language model agents, which distills expert tacit knowledge into reusable Skills. Each Skill is organized as a decision tree that packages parameterized measurement commands, quantitative acceptance criteria, and audit records, enabling autonomous execution and self-healing. We capture this knowledge through a three-phase human-in-the-loop distillation process and fine-tune a large language model on validated trajectories. On a 112-qubit processor with frequency-tunable transmons, the system autonomously completes calibration of 108 out of 112 qubits in 4.7 hours, achieving a 4--5$\times$ speedup over manual calibration of the full 112 qubits. A cross-validated comparison with expert manual calibration on a 16-qubit subset shows agreement on 14 out of 16 qubits. More importantly, the model demonstrates transferable calibration workflows across devices. While low-level control scripts require minor interface adaptation for different hardware platforms, the core decision logic and task orchestration generalize to new processors, demonstrating a reusable laboratory interface rather than a memorized script.This work demonstrates, for the first time, fully autonomous calibration of a hundred-qubit superconducting processor through reusable and auditable Skills, removing a critical barrier to scalable quantum hardware operation.

quant-ph↗

arXiv2026

Non-Local and Non-Markovian Effects of a Microscopic Two-Level Defect in Superconducting Quantum Circuits

Microscopic two-level systems (TLS) -- ubiquitous atomic-scale defects in solid-state quantum devices -- are a dominant source of qubit decoherence, yet their role is often considered local and short-memoried. Here, we report the observation of a coherent TLS that couples simultaneously to two spatially distant superconducting qubits. The TLS is identified to reside within the tunable coupler linking the qubits, enabling controllability of the TLS-qubit coupling strength via coupler frequency -- a capability absent in earlier studies. This tunability allows us to systematically probe how TLS distorts qubit dynamics, revisiting the decoherence model in the presence of non-Markovian TLS dephasing noise. This is corroborated by the reconstructed $1/f$ noise spectrum of TLS frequency fluctuation spanning more than ten orders of magnitude (0.1\,mHz -- 1\,MHz) that reveals discrete fluctuator signatures. Quantum process tomography further unveils TLS-induced correlated qubit dynamics, highlighting the long-lived TLS as an effective source of non-Markovianity. Our findings expose a previously overlooked interaction mechanism in scalable quantum architectures: defects embedded in coupling elements can simultaneously affect multiple qubits with variable impact. Beyond immediate implications for system characterization and calibration, this situation provides a powerful testbed for studying defect-driven quantum dynamics, refining error suppression strategies, and advancing architecture design for scalable quantum technologies.

quant-ph↗

arXiv2026

Suppressing spurious transitions using spectrally balanced pulse

Achieving precise control over quantum systems presents a significant challenge, especially in many-body setups, where residual couplings and unintended transitions undermine the accuracy of quantum operations. In superconducting qubits, parasitic interactions -- both between distant qubits and with spurious two-level systems -- can severely limit the performance of quantum gates. In this work, we introduce a pulse-shaping technique that uses spectrally balanced microwave pulses to suppress undesired transitions. Experimental results demonstrate an order-of-magnitude reduction in spurious excitations between weakly detuned qubits, as well as a substantial decrease in single-qubit gate errors caused by a strongly coupled two-level defect over a broad frequency range. Our method provides a simple yet powerful solution to mitigate adverse effects from parasitic couplings, enhancing the fidelity of quantum operations and expanding feasible frequency allocations for large-scale quantum devices.

quant-ph↗

arXiv2025

Efficient Implementation of Arbitrary Two-Qubit Gates via Unified Control

The native gate set is fundamental to the performance of quantum devices, as it governs the accuracy of basic quantum operations and dictates the complexity of implementing quantum algorithms. Traditional approaches to extending gate sets often require accessing multiple transitions within an extended Hilbert space, leading to increased control complexity while offering only a limited set of gates. Here, we experimentally demonstrate a unified and highly versatile gate scheme capable of natively generating arbitrary two-qubit gates using only exchange interaction and qubit driving on a superconducting quantum processor, achieving maximum expressivity. Using a state-of-the-art transmon-coupler-transmon architecture, we achieve high fidelities averaging $99.37 \pm 0.07\%$ across a wide range of commonly used two-qubit unitaries. This outstanding performance, combined with reduced complexity, enables precise multipartite entangled state preparation, as demonstrated. To further enhance its applicability, we also show the high-fidelity realization of the unique B gate, which efficiently synthesizes the entire family of two-qubit gates. Our results highlight that fully exploiting the capabilities of a single interaction can yield a comprehensive and highly accurate gate set. With maximum expressivity, gate-time optimality, demonstrated high fidelity, and easy adaptability to other quantum platforms, our unified control scheme paves the way for optimal performance in quantum devices, offering exciting prospects for advancing quantum hardware and algorithm development.

quant-ph↗

arXiv2025

Exact Decoding of Repetition Code under Circuit Level Noise

Repetition code forms a fundamental basis for quantum error correction experiments. To date, it stands as the sole code that has achieved large distances and extremely low error rates. Its applications span the spectrum of evaluating hardware limitations, pinpointing hardware defects, and detecting rare events. However, current methods for decoding repetition codes under circuit level noise are suboptimal, leading to inaccurate error correction thresholds and introducing additional errors in event detection. In this work, we establish that repetition code under circuit level noise has an exact solution, and we propose an optimal maximum likelihood decoding algorithm called planar. The algorithm is based on the exact solution of the spin glass partition function on planar graphs and has polynomial computational complexity. Through extensive numerical experiments, we demonstrate that our algorithm uncovers the exact threshold for depolarizing noise and realistic superconductor SI1000 noise. Furthermore, we apply our method to analyze data from recent quantum memory experiments conducted by Google Quantum AI, revealing that part of the error floor was attributed to the decoding algorithm used by Google. Finally, we implemented the repetition code quantum memory on superconducting systems with a 72-qubit quantum chip lacking reset gates, demonstrating that even with an unknown error model, the proposed algorithm achieves a significantly lower logical error rate than the matching-based algorithm.

quant-ph↗

arXiv2024

Mapping Topology-Localization Phase Diagram with Quasiperiodic Disorder Using a Programmable Superconducting Simulator

We explore topology-localization phase diagram by simulating one-dimensional Su-Schrieffer-Heeger (SSH) model with quasiperiodic disorder using a programmable superconducting simulator. We experimentally map out and identify various trivial and topological phases with extended, critical, and localized bulk states. We find that with increasing disorder strength, some extended states can be first replaced by localized states and then by critical states before the system finally becomes fully localized. The critical states exhibit typical features such as multifractality and self-similarity, which lead to surprisingly rich phases with different types of mobility edges and scaling behaviors on the phase boundaries. Our results shed new light on the investigation of the topological and localization phenomena in condensed-matter physics.

quant-ph↗

arXiv2024

Quantum Compiling with Reinforcement Learning on a Superconducting Processor

To effectively implement quantum algorithms on noisy intermediate-scale quantum (NISQ) processors is a central task in modern quantum technology. NISQ processors feature tens to a few hundreds of noisy qubits with limited coherence times and gate operations with errors, so NISQ algorithms naturally require employing circuits of short lengths via quantum compilation. Here, we develop a reinforcement learning (RL)-based quantum compiler for a superconducting processor and demonstrate its capability of discovering novel and hardware-amenable circuits with short lengths. We show that for the three-qubit quantum Fourier transformation, a compiled circuit using only seven CZ gates with unity circuit fidelity can be achieved. The compiler is also able to find optimal circuits under device topological constraints, with lengths considerably shorter than those by the conventional method. Our study exemplifies the codesign of the software with hardware for efficient quantum compilation, offering valuable insights for the advancement of RL-based compilers.

quant-ph↗

arXiv2023

Performing SU($d$) operations and rudimentary algorithms in a superconducting transmon qudit for $d=3$ and $d=4$

Quantum computation architecture based on $d$-level systems, or qudits, has attracted considerable attention recently due to their enlarged Hilbert space. Extensive theoretical and experimental studies have addressed aspects of algorithms and benchmarking techniques for qudit-based quantum computation and quantum information processing. Here, we report a physical realization of qudit with upto 4 embedded levels in a superconducting transmon, demonstrating high-fidelity initialization, manipulation, and simultaneous multi-level readout. In addition to constructing SU($d$) operations and benchmarking protocols for quantum state tomography, quantum process tomography, and randomized benchmarking etc, we experimentally carry out these operations for $d=3$ and $d=4$. Moreover, we perform prototypical quantum algorithms and observe outcomes consistent with expectations. Our work will hopefully stimulate further research interest in developing manipulation protocols and efficient applications for quantum processors with qudits.

quant-ph↗

arXiv2023

Error per single-qubit gate below $10^{-4}$ in a superconducting qubit

Implementing arbitrary single-qubit gates with near perfect fidelity is among the most fundamental requirements in gate-based quantum information processing. In this work, we fabric a transmon qubit with long coherence times and demonstrate single-qubit gates with the average gate error below $10^{-4}$, i.e. $(7.42\pm0.04)\times10^{-5}$ by randomized benchmarking (RB). To understand the error sources, we experimentally obtain an error budget, consisting of the decoherence errors lower bounded by $(4.62\pm0.04)\times10^{-5}$ and the leakage rate per gate of $(1.16\pm0.04)\times10^{-5}$. Moreover, we reconstruct the process matrices for the single-qubit gates by the gate set tomography (GST), with which we simulate RB sequences and obtain single-qubit fedlities consistent with experimental results. We also observe non-Markovian behavior in the experiment of long-sequence GST, which may provide guidance for further calibration. The demonstration extends the upper limit that the average fidelity of single-qubit gates can reach in a transmon-qubit system, and thus can be an essential step towards practical and reliable quantum computation in the near future.

quant-ph↗

arXiv2022

Spurious microwave crosstalk in floating superconducting circuits

Crosstalk is a major concern in the implementation of large-scale quantum computation since it can degrade the performance of qubit addressing and cause gate errors. Finding the origin of crosstalk and separating contributions from different channels are essential prerequisites for figuring out crosstalk mitigation schemes. Here, by performing circuit analysis of two coupled floating transmon qubits, we demonstrate that, even if the stray coupling, e.g., between a qubit and the drive line of its nearby qubit, is absent, microwave crosstalk between qubits can still exist due to the presence of a spurious crosstalk channel. This channel arises from free modes, which are supported by the floating structure of transmon qubits, i.e., the two superconducting islands of each qubit with no galvanic connection to the ground. For various geometric layouts of floating transmon qubits, we give the contributions of microwave crosstalk from the spurious channel and show that this channel can become a performance-limiting factor in qubit addressing. This research could provide guidance for suppressing microwave crosstalk between floating superconducting qubits through the design of qubit circuits.

quant-ph↗

arXiv2022

Quantum circuit architecture search on a superconducting processor

Variational quantum algorithms (VQAs) have shown strong evidences to gain provable computational advantages for diverse fields such as finance, machine learning, and chemistry. However, the heuristic ansatz exploited in modern VQAs is incapable of balancing the tradeoff between expressivity and trainability, which may lead to the degraded performance when executed on the noisy intermediate-scale quantum (NISQ) machines. To address this issue, here we demonstrate the first proof-of-principle experiment of applying an efficient automatic ansatz design technique, i.e., quantum architecture search (QAS), to enhance VQAs on an 8-qubit superconducting quantum processor. In particular, we apply QAS to tailor the hardware-efficient ansatz towards classification tasks. Compared with the heuristic ansatze, the ansatz designed by QAS improves test accuracy from 31% to 98%. We further explain this superior performance by visualizing the loss landscape and analyzing effective parameters of all ansatze. Our work provides concrete guidance for developing variable ansatze to tackle various large-scale quantum learning problems with advantages.

quant-ph↗

arXiv2021

Realizing discrete time crystal in an one-dimensional superconducting qubit chain

Floquet engineering, i.e. driving the system with periodic Hamiltonians, not only provides great flexibility in analog quantum simulation, but also supports phase structures of great richness. It has been proposed that Floquet systems can support a discrete time-translation symmetry (TTS) broken phase, dubbed the discrete time crystal (DTC). This proposal, as well as the exotic phase, has attracted tremendous interest among the community of quantum simulation. Here we report the observation of the DTC in an one-dimensional superconducting qubit chain. We experimentally realize long-time stroboscopic quantum dynamics of a periodically driven spin system consisting of 8 transmon qubits, and obtain a lifetime of the DTC order limited by the coherence time of the underlying physical platform. We also explore the crossover between the discrete TTS broken and unbroken phases via various physical signatures. Our work extends the usage of superconducting circuit systems in quantum simulation of many-body physics, and provides an experimental tool for investigating non-equilibrium dynamics and phase structures.

quant-ph↗

arXiv2021

Vacuum-gap transmon qubits realized using flip-chip technology

Significant progress has been made in building large-scale superconducting quantum processors based on flip-chip technology. In this work, we use the flip-chip technology to realize a modified transmon qubit, donated as the "flipmon", whose large shunt capacitor is replaced by a vacuum-gap parallel plate capacitor. To further reduce the qubit footprint, we place one of the qubit pads and a single Josephson junction on the bottom chip and the other pad on the top chip which is galvanically connected with the single Josephson junction through an indium bump. The electric field participation ratio can arrive at nearly 53% in air when the vacuum-gap is about 5 microns, and thus potentially leading to a lower dielectric loss. The coherence times of the flipmons are measured in the range of 30-60 microseconds, which are comparable with that of traditional transmons with similar fabrication processes. The electric field simulation indicates that the metal-air interface's participation ratio increases significantly and may dominate the qubit's decoherence. This suggests that more careful surface treatment needs to be considered. No evidence shows that the indium bumps inside the flipmons cause significant decoherence. With well-designed geometry and good surface treatment, the coherence of the flipmons can be further improved.

quant-ph↗

arXiv2021

Transmon qubit with relaxation time exceeding 0.5 milliseconds

By using the dry etching process of tantalum (Ta) film, we had obtained transmon qubit with the best lifetime (T1) 503 us, suggesting that the dry etching process can be adopted in the following multi-qubit fabrication with Ta film. We also compared the relaxation and coherence times of transmons made with different materials (Ta, Nb and Al) with the same design and fabrication processes of Josephson junction, we found that samples prepared with Ta film had the best performance, followed by those with Al film and Nb film. We inferred that the reason for this difference was due to the different loss of oxide materials located at the metal-air interface.

quant-ph↗

arXiv2020

Realisation of adiabatic and diabatic CZ gates in superconducting qubits coupled with a tunable coupler

High fidelity two-qubit gates are fundamental for scaling up the superconducting number. We use two qubits coupled via a frequency-tunable coupler which can adjust the coupling strength, and demonstrate the CZ gate using two different schemes, adiabatic and diabatic methods. The Clifford based Randomized Benchmarking (RB) method is used to assess and optimize the CZ gate fidelity. The fidelity of adiabatic and diabatic CZ gates are 99.53(8)% and 98.72(2)%, respectively. We also analyze the errors induced by the decoherence. Comparing to 30 ns duration time of adiabatic CZ gate, the duration time of diabatic CZ gate is 19 ns, revealing lower incoherence error rate $r'_{\rm{incoherent, int}}$ = 0.0197(5) than $r_{\rm{incoherent, int}}$ = 0.0223(3).

quant-ph↗

arXiv2020

Characterize noise correlation and enhance coherence via qubit motion

The identification of spacial noise correlation is of critical importance in developing error-corrected quantum devices, but it has barely been studied so far. In this work, we utilize an effective new method called qubit motion, to efficiently determine the noise correlations between any pair of qubits in a 7-qubit superconducting quantum system. The noise correlations between the same pairs of qubits are also investigated when the qubits are at distinct operating frequencies. What's more, in this multi-qubit system with the presence of noise correlations, we demonstrate the enhancing effect of qubit motion on the coherence of logic qubit, and we propose a Motion-CPMG operation sequence to more efficiently protect the logic state from decoherence, which is experimentally demonstrated to extend the decoherence time of logic qubit by nearly one order of magnitude.

quant-ph↗

arXiv2017

Tunneling Spectroscopy of Atomically-Thin Al2O3 Films for Tunnel Junctions

Metal-Insulator-Metal tunnel junctions (MIMTJ) are common throughout the microelectronics industry. The industry standard AlOx tunnel barrier, formed through oxygen diffusion into an Al wetting layer, is plagued by internal defects and pinholes which prevent the realization of atomically-thin barriers demanded for enhanced quantum coherence. In this work, we employed in situ scanning tunneling spectroscopy (STS) along with molecular dynamics simulations to understand and control the growth of atomically thin Al2O3 tunnel barriers using atomic layer deposition (ALD). We found that a carefully tuned initial H2O pulse hydroxylated the Al surface and enabled the creation of an atomically-thin Al2O3 tunnel barrier with a high quality M-I interface and a significantly enhanced barrier height compared to thermal AlOx. These properties, corroborated by fabricated Josephson Junctions, show that ALD Al2O3 is a dense, leak-free tunnel barrier with a low defect density which can be a key component for the next-generation of MIMTJs.

cond-mat.mtrl-sci↗