arXiv subjects

Huiping Huang

Publications and source records attributed to Huiping Huang.

15 recordsLinked to original sources

arXiv2026

On-Site Beam Calibration for RIS-Aided Positioning Systems

High precision positioning is a key enabler for next-generation communication applications such as smart transportation and augmented reality. Reconfigurable intelligent surface (RIS) technology can enhance positioning by providing additional angular information and improving coverage under obstructed propagation conditions. However, true RIS beams can differ significantly from the simplified or ideal beam response models commonly used in RIS-aided positioning, leading to beam model mismatch and an elevated positioning error floor. This paper proposes an on-site RIS beam calibration framework that reduces this error floor by estimating a realistic 3D RIS beam response model from on-site measurements. The proposed calibration algorithm first extracts the RIS-reflected channel response from signals received by a calibration agent sampling the angular range of interest, using delay-domain sparse recovery, and then estimates the beam model parameters with a gradient-based estimator. To validate the proposed framework, 3D beam patterns under 66 phase modulations were measured and incorporated into simulations. With an angular sampling step of 1 deg, the calibrated model achieves an average beam response similarity of 88.5% with respect to the ground truth, compared with 43.7% for the ideal model. The probability that the absolute lower bound of the positioning error is below 0.5m increases from 0.52 without calibration to 0.74 after calibration, showing that on-site RIS beam calibration effectively reduces the positioning error floor caused by true beam model mismatch.

eess.SP↗

arXiv2026

Nested array design of extended coprime sets for DOA estimation of non-circular signals

In recent years, direction of arrival estimation utilizing non-circular signals has become a focal point for scholarly research. To enhance the degrees of freedom (DOF) in receiver arrays specifically for non-circular signal DOA estimation, this study introduces a novel array configuration. This design leverages an extended coprime framework, applying a sliding translation technique to optimize sensor placement. Crucially, this rearranged structure preserves the continuity of the difference co-array (DCA). Furthermore, the sum co-array (SCA) is shifted to merge seamlessly with the DCA, eliminating redundancy and substantially expanding both the virtual aperture array (VAA) and the DOF. Consequently, the proposed array demonstrates superior performance in practical DOA estimation tasks involving non-circular signals. Simulation results and comparative analyses confirm that, relative to traditional Nested Arrays (NA), Extended Sliding Nested Array (ESNA), and other benchmark structures, the proposed array achieves better DOF and VAA, leading to enhanced estimation accuracy in practical scenarios.

cs.NI↗

arXiv2026

Automatic In-Domain Exemplar Construction and LLM-Based Refinement of Multi-LLM Expansions for Query Expansion

Query expansion with large language models is promising but often relies on hand-crafted prompts, manually chosen exemplars, or a single LLM, making it non-scalable and sensitive to domain shift. We present an automated, domain-adaptive QE framework that builds in-domain exemplar pools by harvesting pseudo-relevant passages using a BM25-MonoT5 pipeline. A training-free cluster-based strategy selects diverse demonstrations, yielding strong and stable in-context QE without supervision. To further exploit model complementarity, we introduce a two-LLM ensemble in which two heterogeneous LLMs independently generate expansions and a refinement LLM consolidates them into one coherent expansion. Across TREC DL20, DBPedia, and SciFact, the refined ensemble delivers consistent and statistically significant gains over BM25, Rocchio, zero-shot, and fixed few-shot baselines. The framework offers a reproducible testbed for exemplar selection and multi-LLM generation, and a practical, label-free solution for real-world QE.

cs.IR↗

arXiv2026

Mismatch Analysis and Cooperative Calibration of Array Beam Patterns for ISAC Systems

Integrated sensing and communication (ISAC) is a key technology for enabling a wide range of applications in future wireless systems. However, the sensing performance is often degraded by model mismatches caused by geometric errors (e.g., position and orientation) and hardware impairments (e.g., mutual coupling and amplifier non-linearity). This paper focuses on the angle estimation performance with antenna arrays and tackles the critical challenge of array beam pattern calibration for ISAC systems. To assess calibration quality from a sensing perspective, a novel performance metric that accounts for angle estimation error, rather than beam pattern similarity, is proposed and incorporated into a differentiable loss function. Additionally, a cooperative calibration framework is introduced, allowing multiple user equipments to iteratively optimize the beam pattern based on the proposed loss functions and local data, and collaboratively update global calibration parameters. The proposed models and algorithms are validated using real-world beam pattern measurements collected in an anechoic chamber. Experimental results show that the angle estimation error can be reduced from {$\textbf{1.01}^\circ$} to $\textbf{0.11}^\circ$ in 2D calibration scenarios, and from $\textbf{5.19}^\circ$ to $\textbf{0.86}^\circ$ in 3D calibration ones.

eess.SP↗

arXiv2025

RIS Beam Calibration for ISAC Systems: Modeling and Performance Analysis

High-accuracy localization is a key enabler for integrated sensing and communication (ISAC), playing an essential role in various applications such as autonomous driving. Antenna arrays and reconfigurable intelligent surface (RIS) are incorporated into these systems to achieve high angular resolution, assisting in the localization process. However, array and RIS beam patterns in practice often deviate from the idealized models used for algorithm design, leading to significant degradation in positioning accuracy. This mismatch highlights the need for beam calibration to bridge the gap between theoretical models and real-world hardware behavior. In this paper, we present and analyze three beam models considering several key non-idealities such as mutual coupling, non-ideal codebook, and measurement uncertainties. Based on the models, we then develop calibration algorithms to estimate the model parameters that can be used for future localization tasks. This work evaluates the effectiveness of the beam models and the calibration algorithms using both theoretical bounds and real-world beam pattern data from an RIS prototype. The simulation results show that the model incorporating combined impacts can accurately reconstruct measured beam patterns. This highlights the necessity of realistic beam modeling and calibration to achieve high-accuracy localization.

eess.SP↗

arXiv2025

Joint Near-Field Sensing and Visibility Region Detection with Extremely Large Aperture Arrays

In this paper, we consider near-field localization and sensing with an extremely large aperture array under partial blockage of array antennas, where spherical wavefront and spatial non-stationarity are accounted for. We propose an Ising model to characterize the clustered sparsity feature of the blockage pattern, develop an algorithm based on alternating optimization for joint channel parameter estimation and visibility region detection, and further estimate the locations of the user and environmental scatterers. The simulation results confirm the effectiveness of the proposed algorithm compared to conventional methods.

eess.SP↗

arXiv2024

Hybrid Precoder Design for Angle-of-Departure Estimation with Limited-Resolution Phase Shifters

Hybrid analog-digital beamforming stands out as a key enabler for future communication systems with a massive number of antennas. In this paper, we investigate the hybrid precoder design problem for angle-of-departure (AoD) estimation, where we take into account the practical constraint on the limited resolution of phase shifters. Our goal is to design a radio-frequency (RF) precoder and a base-band (BB) precoder to estimate AoD of the user with a high accuracy. To this end, we propose a two-step strategy where we first obtain the fully digital precoder that minimizes the angle error bound, and then the resulting digital precoder is decomposed into an RF precoder and a BB precoder, based on the alternating optimization and the alternating direction method of multipliers. Besides, we derive the quantization error upper bound and analyse the convergence behavior of the proposed algorithm. Numerical results demonstrate the superior performance of the proposed method over state-of-the-art baselines.

cs.IT↗

arXiv2024

Active RIS-Aided Terahertz Communications with Phase Error and Beam Misalignment

Terahertz (THz) communications will be pivotal in sixth-generation (6G) wireless networks, offering significantly wider bandwidths and higher data rates. However, the unique propagation characteristics of the THz frequency band, such as high path loss and sensitivity to blockages, pose substantial challenges. Reconfigurable intelligent surfaces (RISs) present a promising solution for enhancing THz communications by dynamically shaping the propagation environment to address these issues. Active RISs, in particular, can amplify reflected signals, effectively mitigating the multiplicative fading effects in RIS-aided links. Given the highly directional nature of THz signals, beam misalignment is a significant concern, while discrete phase shifting is more practical for real-world RIS deployment compared to continuous adjustments. This paper investigates the performance of active-RIS-aided THz communication systems, focusing on discrete phase shifts and beam misalignment. An expression for the ergodic capacity is derived, incorporating critical system parameters to assess performance. Numerical results offer insights into optimizing active-RIS-aided THz communication systems.

cs.NI↗

arXiv2024

A Tutorial on 5G Positioning

The widespread adoption of the fifth generation (5G) of cellular networks has brought new opportunities for the development of localization-based services. High-accuracy positioning use cases and functionalities defined by the standards are drawing the interest of vertical industries. In the transition towards the deployment, this paper aims to provide an in-depth tutorial on 5G positioning, summarizing the evolutionary path that led to the standardization of cellular-based positioning, describing the localization elements in current and forthcoming releases of the Third Generation Partnership Project (3GPP) standard, and the major research trends. By providing fundamental notions on wireless localization, comprehensive definitions of measurements and architectures, examples of algorithms, and details on simulation approaches, this paper is intended to represent an exhaustive guide for researchers and practitioners. Our approach aims to merge practical aspects of enabled use cases and related requirements with theoretical methodologies and fundamental bounds, allowing to understand the trade-off between system complexity and achievable, i.e., tangible, benefits of 5G positioning services. We analyze the performance of 3GPP Rel-16 positioning by standard-compliant simulations in realistic outdoor and indoor propagation environments, investigating the impact of the system configuration and the limitations to be resolved for delivering accurate positioning solutions.

eess.SP↗

arXiv2023

Joint DOA estimation and distorted sensor detection under entangled low-rank and row-sparse constraints

The problem of joint direction-of-arrival estimation and distorted sensor detection has received a lot of attention in recent decades. Most state-of-the-art work formulated such a problem via low-rank and row-sparse decomposition, where the low-rank and row-sparse components were treated in an isolated manner. Such a formulation results in a performance loss. Differently, in this paper, we entangle the low-rank and row-sparse components by exploring their inherent connection. Furthermore, we take into account the maximal distortion level of the sensors. An alternating optimization scheme is proposed to solve the low-rank component and the sparse component, where a closed-form solution is derived for the low-rank component and a quadratic programming is developed for the sparse component. Numerical results exhibit the effectiveness and superiority of the proposed method.

eess.SP↗

arXiv2023

Sparse Array Beamformer Design via ADMM

In this paper, we devise a sparse array design algorithm for adaptive beamforming. Our strategy is based on finding a sparse beamformer weight to maximize the output signal-to-interference-plus-noise ratio (SINR). The proposed method utilizes the alternating direction method of multipliers (ADMM), and admits closed-form solutions at each ADMM iteration. The algorithm convergence properties are analyzed by showing the monotonicity and boundedness of the augmented Lagrangian function. In addition, we prove that the proposed algorithm converges to the set of Karush-Kuhn-Tucker stationary points. Numerical results exhibit its excellent performance, which is comparable to that of the exhaustive search approach, slightly better than those of the state-of-the-art solvers, including the semidefinite relaxation (SDR), its variant (SDR-V), and the successive convex approximation (SCA) approaches, and significantly outperforms several other sparse array design strategies, in terms of output SINR. Moreover, the proposed ADMM algorithm outperforms the SDR, SDR-V, and SCA methods, in terms of computational complexity.

eess.SP↗

arXiv2023

Sparse Array Design for Dual-Function Radar-Communications System

The problem of sparse array design for dual-function radar-communications is investigated. Our goal is to design a sparse array which can simultaneously shape desired beam responses and serve multiple downlink users with the required signal-to-interference-plus-noise ratio levels. Besides, we also take into account the limitation of the radiated power by each antenna. The problem is formulated as a quadratically constrained quadratic program with a joint-sparsity-promoting regularization, which is NP-hard. The resulting problem is solved by the consensus alternating direction method of multipliers, which enjoys parallel implementation. Numerical simulations exhibit the effectiveness and superiority of the proposed method which leads to a more power-efficient solution.

eess.SY↗

arXiv2023

Convergence Analysis of Consensus-ADMM for General QCQP

We analyze the convergence properties of the consensus-alternating direction method of multipliers (ADMM) for solving general quadratically constrained quadratic programs. We prove that the augmented Lagrangian function value is monotonically non-increasing as long as the augmented Lagrangian parameter is chosen to be sufficiently large. Simulation results show that the augmented Lagrangian function is bounded from below when the matrix in the quadratic term of the objective function is positive definite. In such a case, the consensus-ADMM is convergent.

eess.SP↗

arXiv2022

Low-Rank and Row-Sparse Decomposition for Joint DOA Estimation and Distorted Sensor Detection

Distorted sensors could occur randomly and may lead to the breakdown of a sensor array system. We consider an array model within which a small number of sensors are distorted by unknown sensor gain and phase errors. With such an array model, the problem of joint direction-of-arrival (DOA) estimation and distorted sensor detection is investigated and the problem is formulated under the framework of low-rank and row-sparse decomposition. We derive an iteratively reweighted least squares (IRLS) algorithm to solve the resulting problem in both noiseless and noisy cases. The convergence property of the IRLS algorithm is analyzed by means of the monotonicity and boundedness of the objective function. Extensive simulations are conducted regarding parameter selection, convergence speed, computational complexity, and performances of DOA estimation as well as distorted sensor detection. Even though the IRLS algorithm is slightly worse than the alternating direction method of multipliers in detecting the distorted sensors, the results show that our approach outperforms several state-of-the-art techniques in terms of convergence speed, computational cost, and DOA estimation performance.

eess.SP↗

arXiv2022

Off-Grid Direction-of-Arrival Estimation Using Second-Order Taylor Approximation

The problem of off-grid direction-of-arrival (DOA) estimation is investigated. We develop a grid-based method to jointly estimate the closest spatial frequency (the sine of DOA) grids, and the gaps between the estimated grids and the corresponding frequencies. By using a second-order Taylor approximation, the data model under the framework of joint-sparse representation is formulated. We point out an important property of the signals of interest in the model, namely the proportionality relationship, which is empirically demonstrated to be useful in the sense that it increases the probability of the mixing matrix satisfying the block restricted isometry property. Simulation examples demonstrate the effectiveness and superiority of the proposed method against several state-of-the-art grid-based approaches.

eess.SP↗