arXiv subjects

Hung-Cuong Trinh

Publications and source records attributed to Hung-Cuong Trinh.

6 recordsLinked to original sources

arXiv2026

Relative Discharge Stage (RDS) Classification: A Practical Indicator of Battery Discharge Progress

Accurate remaining discharge time (RDT) prediction is challenging in real-world battery applications because future load profiles are unknown and highly dynamic. To address the uncertainty of continuous RDT regression, this paper introduces Relative Discharge Stage (RDS), a battery-management indicator that represents the remaining discharge condition using five interpretable classes: Normal, Good, Moderate, Low, and Recharge Required. Unlike state of charge (SOC), which reflects the current charge level, RDS characterizes the remaining discharge process without requiring future-current information during inference. A physics-informed RDS classification framework is proposed, combining SOC estimation with lightweight temporal learning. The SOC-estimation component includes second-order ECM state and terminal-voltage prediction, hysteresis and OCV temperature correction, core-temperature estimation, and AEKF state correction, supported by OCV evaluation, online STC-ECM parameter adaptation, and pretrained neural residual-voltage correction. The measured current, terminal voltage, surface temperature, and estimated SOC are arranged into a sliding observation window and processed by a lightweight temporal convolutional network. Experiments on two public lithium-ion battery datasets demonstrate robust RDS classification, with accuracy exceeding 80% under varying load and thermal conditions.

cs.LG↗

arXiv2026

Joint Remaining Useful Life Prediction and Capacity Estimation of Lithium-Ion Batteries Using Partial-Charging Data

Joint remaining useful life (RUL) prediction and capacity estimation require representations of both gradual degradation and recent battery behavior. This paper presents a cross-expert framework using partial-charging measurements without requiring measured historical full-cycle capacity as an input. The RUL Expert captures long-term degradation from nominal 10-min segments sampled across a 30-cycle history, while the Capacity Expert characterizes recent battery behavior from statistical descriptors of nominal 40-min segments over ten consecutive cycles. Their complementary representations are integrated through feature-wise linear modulation for joint RUL and capacity prediction. A key contribution is a three-stage training strategy that progressively controls frozen and trainable components: supervised representation pretraining, independent expert pretraining, and final fusion training with both experts frozen. This staged optimization preserves expert-specific degradation knowledge while improving the balance between the two prediction tasks, with RUL treated as the primary prognostic objective. On two public battery-aging datasets, the reference configuration achieves mean RUL root-mean-square errors of 143.69 and 161.10 cycles and capacity errors of 12.36 and 7.28 mAh, respectively. On Dataset I, cross-expert fusion reduces both mean errors relative to either standalone expert. The proposed framework achieves the lowest reported RUL RMSE among the compared methods on both datasets while maintaining competitive capacity-estimation accuracy.

cs.LG↗

arXiv2026

C2L-Net: A Data-Driven Model for State-of-Charge Estimation of Lithium-Ion Batteries During Discharge

Accurate state-of-charge (SOC) estimation is critical for the safe and efficient operation of lithium-ion batteries in battery management systems (BMS). Although data-driven approaches can effectively capture nonlinear battery dynamics, many existing methods rely on long historical input sequences, resulting in high computational cost and introducing padding-induced positional bias at the beginning of drive cycles. To address these limitations, we propose C2L-Net, a novel context-to-latest data-driven framework for realistic online SOC estimation using only a short historical window (20 s). Unlike existing short-receptive-field or long-history models, the proposed framework explicitly separates contextual encoding from latest-measurement updating, enabling both efficient temporal modeling and rapid adaptation to dynamic battery states. The proposed model incorporates a chunk-based feature extraction mechanism that combines Theta Attention Pooling with a Fourier-based Seasonality Basis to capture local temporal patterns while reducing sequence length. A causal context encoder, integrating a gated recurrent unit (GRU) with Causal Cosine Attention, models temporal dependencies without information leakage. Furthermore, a latest-measurement decoder, inspired by recursive filtering, updates the contextual state using the most recent measurement, enhancing responsiveness to dynamic operating conditions. Extensive experiments on a public lithium-ion battery drive-cycle dataset under multiple fixed-temperature conditions demonstrate that the proposed method achieves state-of-the-art or competitive accuracy while significantly improving computational efficiency. In particular, C2L-Net achieves up to 60 times faster inference and requires fewer parameters than recent data-driven baselines, while maintaining robust performance across unseen driving profiles.

cs.AI↗

arXiv2026

HyBattNet: Hybrid Framework for Predicting the Remaining Useful Life of Lithium-Ion Batteries

Accurate prediction of the Remaining Useful Life (RUL) is essential for enabling timely maintenance of lithium-ion batteries, impacting the operational efficiency of electric applications that rely on them. This paper proposes a RUL prediction approach that leverages data from recent charge-discharge cycles to estimate the number of remaining usable cycles. The approach introduces both a novel signal preprocessing pipeline and a deep learning prediction model. In the signal preprocessing pipeline, a derived capacity feature is computed using interpolated current and capacity signals. Alongside original capacity, voltage and current, these features are denoised and enhanced using statistical metrics and a delta-based method to capture differences between the current and previous cycles. In the prediction model, the processed features are then fed into a hybrid deep learning architecture composed of 1D Convolutional Neural Networks (CNN), Attentional Long Short-Term Memory (A-LSTM), and Ordinary Differential Equation-based LSTM (ODE-LSTM) blocks. The ODE-LSTM architecture employs ordinary differential equations to integrate continuous dynamics into sequence-to-sequence modeling, thereby combining continuous and discrete temporal representations, while the A-LSTM incorporates an attention mechanism to capture local temporal dependencies. The model is further evaluated using transfer learning across different learning strategies and target data partitioning scenarios. Results indicate that the model maintains robust performance, even when fine-tuned on limited target data. Experimental results on two publicly available LFP/graphite lithium-ion battery datasets demonstrate that the proposed method outperforms a baseline deep learning approach and machine learning techniques, achieving an RMSE of 101.59, highlighting its potential for real-world RUL prediction applications.

cs.LG↗

arXiv2025

SeqBattNet: A Discrete-State Physics-Informed Neural Network with Aging Adaptation for Battery Modeling

Accurate battery modeling is essential for reliable state estimation in modern applications, such as predicting the remaining discharge time and remaining discharge energy in battery management systems. Existing approaches face several limitations: model-based methods require a large number of parameters; data-driven methods rely heavily on labeled datasets; and current physics-informed neural networks (PINNs) often lack aging adaptation, or still depend on many parameters, or continuously regenerate states. In this work, we propose SeqBattNet, a discrete-state PINN with built-in aging adaptation for battery modeling, to predict terminal voltage during the discharge process. SeqBattNet consists of two components: (i) an encoder, implemented as the proposed HRM-GRU deep learning module, which generates cycle-specific aging adaptation parameters; and (ii) a decoder, based on the equivalent circuit model (ECM) combined with deep learning, which uses these parameters together with the input current to predict voltage. The model requires only three basic battery parameters and, when trained on data from a single cell, still achieves robust performance. Extensive evaluations across three benchmark datasets (TRI, RT-Batt, and NASA) demonstrate that SeqBattNet significantly outperforms classical sequence models and PINN baselines, achieving consistently lower RMSE while maintaining computational efficiency.

cs.LG↗

arXiv2025

HybridoNet-Adapt: A Domain-Adapted Framework for Accurate Lithium-Ion Battery RUL Prediction

Accurate prediction of the Remaining Useful Life (RUL) in Lithium ion battery (LIB) health management systems is essential for ensuring operational reliability and safety. However, many existing methods assume that training and testing data follow the same distribution, limiting their ability to generalize to unseen target domains. To address this, we propose a novel RUL prediction framework that incorporates a domain adaptation (DA) technique. Our framework integrates a signal preprocessing pipeline including noise reduction, feature extraction, and normalization with a robust deep learning model called HybridoNet Adapt. The model features a combination of LSTM, Multihead Attention, and Neural ODE layers for feature extraction, followed by two predictor modules with trainable trade-off parameters. To improve generalization, we adopt a DA strategy inspired by Domain Adversarial Neural Networks (DANN), replacing adversarial loss with Maximum Mean Discrepancy (MMD) to learn domain-invariant features. Experimental results show that HybridoNet Adapt significantly outperforms traditional models such as XGBoost and Elastic Net, as well as deep learning baselines like Dual input DNN, demonstrating its potential for scalable and reliable battery health management (BHM).

cs.LG↗