arXiv subjects

Hyoungsoo Kim

Publications and source records attributed to Hyoungsoo Kim.

9 recordsLinked to original sources

arXiv2026

Droplet impact on surfactant-laden thin liquid films: Vortex ring dynamics

Droplet impact on surfactant-laden thin liquid films is investigated experimentally with emphasis on vortex ring dynamics. Bottom- and side-view imaging reveal that increasing surfactant concentration progressively stabilize vortex rings, suppress azimuthal instabilities and promote concentric mixing patterns. A regime map is established in terms of film thickness, Reynolds number, and surface-tension ratio, yielding an empirical instability threshold. Shadowgraphy observations suggest that Marangoni stresses modify early capillary-wave dynamics, potentially altering vortex ring formation and delaying instability onset. These findings clarify the link between interfacial stresses, vortex ring dynamics, and mixing patterns in thin-film droplet impact.

physics.flu-dyn↗

arXiv2025

On the vortex ring formation and mixing in thin films upon droplet impact

When a droplet impacts a liquid film, a vortex ring form and govern momentum and species transport. We experimentally investigate vortex ring formation, propagation and instability during droplet impact onto liquid films, with particular emphasis on vortex ring-wall interactions. Particle image velocimetry and laser-induced fluorescence are used to study the effects of Reynolds number Re, Weber number We and dimensionless film thickness \delta over ranges Re \leq 3900, We \leq 61 and 0.09 \leq \delta \leq 1.35. As film thickness decreases, a transition from a single axisymmetric vortex ring to azimuthally unstable, multi-vortex structures is observed. A regime map in Re-\delta space is constructed, showing that vortex ring instabilities occur at lower Re for thinner films, while no instabilities are detected for thick films up to the highest Re studied. The azimuthal wave number increases with Re and decreases with \delta. Thinner films exhibit faster decay of primary vortex ring circulation due to wall interactions, accompanied by the formation of secondary vortex ring at lower Re. An empirical model is proposed to predict the temporal evolution of total vortex ring circulation, accounting for both generation and decay.

physics.flu-dyn↗

arXiv2023

Anomalous crystalline ordering of particles in a viscoelastic fluid under high shear

Addition of particles to a viscoelastic suspension dramatically alters the properties of the mixture, particularly when it is sheared or otherwise processed. Shear-induced stretching of the polymers results in elastic stress that causes a substantial increase in measured viscosity with increasing shear, and an attractive interaction between particles, leading to their chaining. At even higher shear rates, the flow becomes unstable, even in the absence of particles. This instability makes it very difficult to determine the properties of a particle suspension. Here we use a fully immersed parallel plate geometry to measure the high-shear-rate behavior of a suspension of particles in a viscoelastic fluid. We find an unexpected separation of the particles within the suspension resulting in the formation of a layer of particles in the center of the cell. Remarkably, monodisperse particles form a crystalline layer which dramatically alters the shear instability. By combining measurements of the velocity field and torque fluctuations, we show that this solid layer disrupts the flow instability and introduces a new, single-frequency component to the torque fluctuations that reflects a dominant velocity pattern in the flow. These results highlight the interplay between particles and a suspending viscoelastic fluid at very high shear rates.

cond-mat.soft↗

arXiv2020

Non-uniformly receding contact line breaks axisymmetric flow patterns

We investigate the internal flow pattern of an evaporating droplet using tomographic particle image velocimetry (PIV) when the contact line non-uniformly recedes. We observe a three-dimensional azimuthal vortex pair while the contact line non-uniformly recedes and the symmetry-breaking flow field is maintained during the evaporation. Based on the experimental results, we show that the vorticity magnitude of the internal flow is related to the relative contact line motion. Furthermore, to explain how the azimuthal vortex pair flow is created, we develop a theoretical model by taking into account the relation between the contact line motion and evaporating flux. Finally, we show that the theoretical model has a good agreement with experimental results.

physics.flu-dyn↗

arXiv2020

Three-dimensional particle tracking velocimetry using shallow neural network for real-time analysis

Three-dimensional particle tracking velocimetry (3D-PTV) technique is widely used to acquire the complicated trajectories of particles and flow fields. It is known that the accuracy of 3D-PTV depends on the mapping function to reconstruct three-dimensional particles locations. The mapping function becomes more complicated if the number of cameras is increased and there is a liquid-vapor interface, which crucially affect the total computation time. In this paper, using a shallow neural network model (SNN), we dramatically decrease the computation time with a high accuracy to successfully reconstruct the three-dimensional particle positions, which can be used for real-time particle detection for 3D-PTV. The developed technique is verified by numerical simulations and applied to measure a complex solutal Marangoni flow patterns inside a binary mixture droplet.

physics.flu-dyn↗

arXiv2018

Uniform coating of self-assembled non-iridescent colloidal nanostructures using Marangoni effects and polymers

Colloidal crystals exhibit structural color without any color pigment due to the crystals' periodic nanostructure, which can interfere with visible light. This crystal structure is iridescent as the resulting color changes with the viewing or illumination angle, which limits its use for printing or displays. To eliminate the iridescent property, it is important to make the packing of the colloidal nanoparticles disordered. Here, we introduce a drop-casting method where a droplet of a water- ethanol mixture containing monodisperse polymer-coated silica nanoparticles creates a relatively uniform and non-iridescent deposit after the droplet evaporates completely on a heated substrate. The uniformity is caused by a thermal Marangoni flow and fast evaporation effects due to the heated substrate, whereas non-iridescence is the outcome of short-range-ordered packing of nanoparticles by depletion attraction and friction effects produced by polymer brushes. We show that the colors of the final deposits from individual droplets remain unchanged while the viewing angle is varied under ambient light. We expect that the coating method is compatible with ink-jet printing and the uniformly coated self-assembled non-iridescent nanostructures have potential for color displays using reflection mode and other optical devices.

cond-mat.soft↗

arXiv2016

Controlled uniform coating from the interplay of Marangoni flows and surface-adsorbed macromolecules

Surface coatings and patterning technologies are essential for various physicochemical applications. In this Letter, we describe key parameters to achieve uniform particle coatings from binary solutions: First, multiple sequential Marangoni flows, set by solute and surfactant simultaneously, prevent non-uniform particle distributions and continuously mix suspended materials during droplet evaporation. Second, we show the importance of particle-surface interactions that can be established by surface-adsorbed macromolecules. To achieve a uniform deposit in a binary mixture, a small concentration of surfactant and surface-adsorbed polymer (0.05 wt% each) is sufficient, which offers a new physicochemical avenue for control of coatings.

physics.flu-dyn↗

arXiv2015

Deposition of quantum dots in a capillary tube

The ability to assemble nanomaterials, such as quantum dots, enables the creation of functional devices that present unique optical and electronic properties. For instance, light-emitting diodes with exceptional color purity can be printed via the evaporative-driven assembly of quantum dots. Nevertheless, current studies of the colloidal deposition of quantum dots have been limited to the surfaces of a planar substrate. Here, we investigate the evaporation-driven assembly of quantum dots inside a confined cylindrical geometry. Specifically, we observe distinct deposition patterns, such as banding structures along the length of a capillary tube. Such coating behavior can be influenced by the evaporation speed as well as the concentration of quantum dots. Understanding the factors governing the coating process can provide a means to control the assembly of quantum dots inside a capillary tube, ultimately enabling the creation of novel photonic devices.

cond-mat.soft↗

arXiv2014

Curvature suppresses the Rayleigh-Taylor instability

The dynamics of a thin liquid film on the underside of a curved cylindrical substrate is studied. The evolution of the liquid layer is investigated as the film thickness and the radius of curvature of the substrate are varied. A dimensionless parameter (a modified Bond number) that incorporates both geometric parameters, gravity, and surface tension is identified, and allows the observations to be classified according to three different flow regimes: stable films, films with transient growth of perturbations followed by decay, and unstable films. Experiments and theory confirm that, below a critical value of the Bond number, curvature of the substrate suppresses the Rayleigh-Taylor instability.

physics.flu-dyn↗