arXiv subjects

Hyuckjin Choi

Publications and source records attributed to Hyuckjin Choi.

9 recordsLinked to original sources

arXiv2026

Evolution of UE in Massive MIMO Systems for 6G: From Passive to Active

As wireless networks continue to evolve, stringent latency and reliability requirements and highly dynamic channels expose fundamental limitations of gNB-centric massive multiple-input multiple-output (mMIMO) architectures, motivating a rethinking of the user equipment (UE) role. In response, the UE is transitioning from a passive transceiver into an active entity that directly contributes to system-level performance. In this context, this article examines the evolving role of the UE in mMIMO systems during the transition from fifth-generation (5G) to sixth-generation (6G), bridging third generation partnership project (3GPP) standardization, device implementation, and architectural innovation. Through a chronological review of 3GPP Releases 15 to 19, we highlight the progression of UE functionalities from basic channel state information (CSI) reporting to artificial intelligence (AI) and machine learning (ML)-based CSI enhancement and UE-initiated beam management. We further examine key implementation challenges, including multi-panel UE (MPUE) architectures, on-device intelligent processing, and energy-efficient operation, and then discuss corresponding architectural innovations under practical constraints. Using digital-twin-based evaluations, we validate the impact of emerging UE-centric functionalities, illustrating that UE-initiated beam reporting improves throughput in realistic mobility scenarios, while a multi-panel architecture enhances link robustness compared with a single-panel UE.

cs.IT↗

arXiv2025

Anomaly Detection-Based UE-Centric Inter-Cell Interference Suppression

The increasing spectral reuse can cause significant performance degradation due to interference from neighboring cells. In such scenarios, developing effective interference suppression schemes is necessary to improve overall system performance. To tackle this issue, we propose a novel user equipment-centric interference suppression scheme, which effectively detects inter-cell interference (ICI) and subsequently applies interference whitening to mitigate ICI. The proposed scheme, named Z-refined deep support vector data description, exploits a one-class classification-based anomaly detection technique. Numerical results verify that the proposed scheme outperforms various baselines in terms of interference detection performance with limited time or frequency resources for training and is comparable to the performance based on an ideal genie-aided interference suppression scheme. Furthermore, we demonstrate through test equipment experiments using a commercial fifth-generation modem chipset that the proposed scheme shows performance improvements across various 3rd generation partnership project standard channel environments, including tapped delay line-A, -B, and -C models.

cs.IT↗

arXiv2025

Multi-User SLNR-Based Precoding With Gold Nanoparticles in Vehicular VLC Systems

Visible spectrum is an emerging frontier in wireless communications for enhancing connectivity and safety in vehicular environments. The vehicular visible light communication (VVLC) system is a key feature in leveraging existing infrastructures, but it still has several critical challenges. Especially, VVLC channels are highly correlated due to the small gap between light emitting diodes (LEDs) in each headlight, making it difficult to increase data rates by spatial multiplexing. In this paper, we exploit recently synthesized gold nanoparticles (GNPs) to reduce the correlation between LEDs, i.e., the chiroptical properties of GNPs for differential absorption depending on the azimuth angle of incident light are used to mitigate the LED correlation. In addition, we adopt a signal-to-leakage-plus-noise ratio (SLNR)-based precoder to support multiple users. The ratio of RGB light sources in each LED also needs to be optimized to maximize the sum SLNR satisfying a white light constraint for illumination since the GNPs can vary the color of transmitted light by the differential absorption across wavelength. The nonconvex optimization problems for precoders and RGB ratios can be solved by the generalized Rayleigh quotient with the approximated shot noise and successive convex approximation (SCA). The simulation results show that the SLNR-based precoder with the optimized RGB ratios significantly improves the sum rate in a multi-user vehicular environment and the secrecy rate in a wiretapping scenario. The proposed SLNR-based precoding verifies that the decorrelation between LEDs and the RGB ratio optimization are essential to enhance the VVLC performance.

cs.IT↗

arXiv2024

WMMSE-Based Rate Maximization for RIS-Assisted MU-MIMO Systems

Reconfigurable intelligent surface (RIS) technology, given its ability to favorably modify wireless communication environments, will play a pivotal role in the evolution of future communication systems. This paper proposes rate maximization techniques for both single-user and multiuser MIMO systems, based on the well-known weighted minimum mean square error (WMMSE) criterion. Using a suitable weight matrix, the WMMSE algorithm tackles an equivalent weighted mean square error (WMSE) minimization problem to achieve the sum-rate maximization. By considering a more practical RIS system model that employs a tensor-based representation enforced by the electromagnetic behavior exhibited by the RIS panel, we detail both the sum-rate maximizing and WMSE minimizing strategies for RIS phase shift optimization by deriving the closed-form gradient of the WMSE and the sum-rate with respect to the RIS phase shift vector. Our simulations reveal that the proposed rate maximization technique, rooted in the WMMSE algorithm, exhibits superior performance when compared to other benchmarks.

cs.IT↗

arXiv2024

A Deep Reinforcement Learning Approach for Autonomous Reconfigurable Intelligent Surfaces

A reconfigurable intelligent surface (RIS) is a prospective wireless technology that enhances wireless channel quality. An RIS is often equipped with passive array of elements and provides cost and power-efficient solutions for coverage extension of wireless communication systems. Without any radio frequency (RF) chains or computing resources, however, the RIS requires control information to be sent to it from an external unit, e.g., a base station (BS). The control information can be delivered by wired or wireless channels, and the BS must be aware of the RIS and the RIS-related channel conditions in order to effectively configure its behavior. Recent works have introduced hybrid RIS structures possessing a few active elements that can sense and digitally process received data. Here, we propose the operation of an entirely autonomous RIS that operates without a control link between the RIS and BS. Using a few sensing elements, the autonomous RIS employs a deep Q network (DQN) based on reinforcement learning in order to enhance the sum rate of the network. Our results illustrate the potential of deploying autonomous RISs in wireless networks with essentially no network overhead.

cs.IT↗

arXiv2023

WiThRay: A Versatile Ray-Tracing Simulator for Smart Wireless Environments

This paper presents the development and evaluation of WiThRay, a new wireless three-dimensional ray-tracing (RT) simulator. RT-based simulators are widely used for generating realistic channel data by combining RT methodology to get signal trajectories and electromagnetic (EM) equations, resulting in generalized channel impulse responses (CIRs). This paper first provides a comprehensive comparison on methodologies of existing RT-based simulators. We then introduce WiThRay, which can evaluate the performance of various wireless communication techniques such as channel estimation/tracking, beamforming, and localization in realistic EM wave propagation. WiThRay implements its own RT methodology, the bypassing on edge (BE) algorithm, that follows the Fermat's principle and has low computational complexity. The scattering ray calibration in WiThRay also provides a precise solution in the analysis of EM propagation. Different from most of the previous RT-based simulators, WiThRay incorporates reconfigurable intelligent surfaces (RIS), which will be a key component of future wireless communications. We thoroughly show that the channel data from WiThRay match sufficiently well with the fundamental theory of wireless channels. The virtue of WiThRay lies in its feature of not making any assumption about the channel, like being slow/fast fading or frequency selective. A realistic wireless environment, which can be conveniently simulated via WiThRay, naturally defines the physical properties of the wireless channels. WiThRay is open to the public, and anyone can exploit this versatile simulator to develop and test their communications and signal processing techniques.

cs.IT↗

arXiv2022

On the Physical Layer Security of Visible Light Communications Empowered by Gold Nanoparticles

Visible light is a proper spectrum for secure wireless communications because of its high directivity and impermeability in indoor scenarios. However, if an eavesdropper is located very close to a legitimate receiver, secure communications become highly risky. In this paper, to further increase the level of security of visible light communication (VLC) and increase its resilience against to malicious attacks, we propose to capitalize on the recently synthesized gold nanoparticles (GNPs) with chiroptical properties for circularly polarized light resulting the phase retardation that interacts with the linear polarizer angle. GNP plates made by judiciously stacking many GNPs perform as physical secret keys. Transmitters send both the intended symbol and artificial noise to exploit the channel variation effect by the GNP plates, which is highly effective when an eavesdropper is closely located to the legitimate receiver. A new VLC channel model is first developed by representing the effect of GNP plates and linear polarizers in the circular polarization domain. Based on the new channel model, the angles of linear polarizers at the transmitters and legitimate receiver are optimized considering the effect of GNP plates to increase the secrecy rate in wiretapping scenarios. Simulations verify that when the transmitters are equipped with GNP plates, even if the eavesdropper is located right next to the legitimate receiver, insightful results on the physical layer security metrics are gained as follows: 1) the secrecy rate is significantly improved and 2) the symbol error rate gap between the legitimate receiver and eavesdropper becomes much larger due to the chiroptical properties of GNP plates.

cs.IT↗

arXiv2021

Downlink Channel Reconstruction for Spatial Multiplexing in Massive MIMO Systems

To get channel state information (CSI) at a base station (BS), most of researches on massive multiple-input multiple-output (MIMO) systems consider time division duplexing (TDD) to get benefit from the uplink and downlink channel reciprocity. Even in TDD, however, the BS still needs to transmit downlink training signals, which are referred to as channel state information reference signals (CSI-RSs) in the 3GPP standard, to support spatial multiplexing in practice. This is because there are many cases that the number of transmit antennas is less than the number of receive antennas at a user equipment (UE) due to power consumption and circuit complexity issues. Because of this mismatch, uplink sounding reference signals (SRSs) from the UE are not enough for the BS to obtain full downlink MIMO CSI. Therefore, after receiving the downlink CSI-RSs, the UE needs to feed back quantized CSI to the BS using a pre-defined codebook to support spatial multiplexing. In this paper, possible approaches to reconstruct full downlink MIMO CSI at the BS are proposed by exploiting both the SRS and quantized downlink CSI considering practical antenna structures with reduced downlink CSI-RS overhead. Numerical results show that the spectral efficiencies by spatial multiplexing based on the proposed downlink MIMO CSI reconstruction techniques outperform the conventional methods solely based on the quantized CSI.

cs.IT↗

arXiv2020

Downlink Extrapolation for FDD Multiple Antenna Systems Through Neural Network Using Extracted Uplink Path Gains

When base stations (BSs) are deployed with multiple antennas, they need to have downlink (DL) channel state information (CSI) to optimize downlink transmissions by beamforming. The DL CSI is usually measured at mobile stations (MSs) through DL training and fed back to the BS in frequency division duplexing (FDD). The DL training and uplink (UL) feedback might become infeasible due to insufficient coherence time interval when the channel rapidly changes due to high speed of MSs. Without the feedback from MSs, it may be possible for the BS to directly obtain the DL CSI using the inherent relation of UL and DL channels even in FDD, which is called DL extrapolation. Although the exact relation would be highly nonlinear, previous studies have shown that a neural network (NN) can be used to estimate the DL CSI from the UL CSI at the BS. Most of previous works on this line of research trained the NN using full dimensional UL and DL channels; however, the NN training complexity becomes severe as the number of antennas at the BS increases. To reduce the training complexity and improve DL CSI estimation quality, this paper proposes a novel DL extrapolation technique using simplified input and output of the NN. It is shown through many measurement campaigns that the UL and DL channels still share common components like path delays and angles in FDD. The proposed technique first extracts these common coefficients from the UL and DL channels and trains the NN only using the path gains, which depend on frequency bands, with reduced dimension compared to the full UL and DL channels. Extensive simulation results show that the proposed technique outperforms the conventional approach, which relies on the full UL and DL channels to train the NN, regardless of the speed of MSs.

cs.IT↗