SearcharxivSearch

arXiv subjects

Hyung-Joo Moon

Publications and source records attributed to Hyung-Joo Moon.

13 recordsLinked to original sources

Robust Joint Beamforming and Configuration Design in FARIS-Aided Systems

In this paper, we propose a robust transmission design for multi-user systems assisted by a fluid active reconfigurable intelligent surface (FARIS), which enables both active reflection and dynamic port selection and thereby offers enhanced flexibility, under imperfect channel state information (CSI). We formulate a robust minimum sum-rate maximization problem by jointly optimizing the base station beamformer, the utilized FARIS coefficients, and the active element selection, while explicitly accounting for CSI errors and practical power constraints. The resulting problem is inherently nonconvex due to the coupled optimization variables and discrete port-selection structure. To tackle this challenge, we first reformulate the original problem via a weighted minimum mean square error (WMMSE) approach and then devise an alternating optimization (AO) framework, where each resulting subproblem admits efficient solutions and the overall algorithm converges to a stationary point. Simulation results demonstrate that the proposed robust FARIS scheme consistently outperforms conventional designs, highlighting the effectiveness of jointly leveraging degree-of-freedom (DoF) enhancement and active signal amplification under CSI uncertainty.

eess.SP

Enabling Secure Wireless Communications for FARIS-Aided Systems

This paper investigates secure downlink transmission assisted by a fluid active reconfigurable intelligent surface (FARIS), which enables both active reflection and dynamic port selection, offering enhanced flexibility for physical-layer security. We formulate a secrecy rate maximization problem that jointly optimizes the transmit beamformer, active reflection coefficients, and fluid port configuration under practical power constraints. To efficiently handle the resulting highly nonconvex problem, we develop a tailored alternating optimization (AO) framework that decomposes the original joint design into tractable subproblems, where each admits an efficient solution while preserving the system constraints, enabling an effective joint optimization of beamforming and FARIS reconfiguration. Numerical results demonstrate that the proposed FARIS-assisted design consistently outperforms the benchmarks. The results further highlight the robustness of FARIS against unfavorable eavesdropping geometries, confirming its potential as a powerful enabler for secure communications in challenging environments.

eess.SP

Channel2World: A Wireless Foundation Model for RF Environment Representation

Wireless channels are commonly treated as link-specific observations, although their multipath structure is governed by the surrounding radio-frequency (RF) environment. In this paper, we propose Channel2World, a wireless foundation model that learns a reusable environment-level representation from multiple-input multiple-output (MIMO) channel-position observations. The model aggregates channels collected within the same base-station-centered environment into a wireless world embedding using a Transformer-based encoder. The encoder is pretrained through context-query prediction, where context channels condition user equipment (UE) position and relative path-gain prediction for disjoint query channels. After pretraining, the encoder is frozen and used as a task-agnostic environment-conditioning module for downstream wireless models, enabling adaptation to unseen environments without site-specific fine-tuning. To learn an environment-level latent space that generalizes across deployments, we pretrain Channel2World using ray-tracing data from 26,000 environments, with approximately 5,000 channel measurements per environment. Evaluations on UE localization, beam-domain channel state information (CSI) reconstruction, and RF-observable geometry reconstruction show that the learned embeddings provide effective conditioning in unseen environments. For localization and CSI reconstruction tasks, embedding-based conditioning outperforms or remains competitive with site-specific fine-tuning, although fine-tuning requires task-specific labeled data and additional gradient-based adaptation. The embeddings also support the reconstruction of dominant reflector structures, indicating their utility as reusable environmental priors across tasks.

eess.SP

Geometry-Aware DRL for Multi-Subband Scheduling in Satellite-Assisted UAM Networks

In this paper, we investigate downlink scheduling for urban air mobility (UAM) in a cooperative space-air-ground integrated network. Multiple ground stations (GSs) employ narrow three-dimensional beams and share spectrum across multiple subbands, while a satellite provides an orthogonal-band service option. Rapidly time-varying geometry and directional interference require joint decisions on base station association, GS subband assignment, and transmit powers. We formulate a finite-horizon mixed discrete-continuous problem that maximizes sum rate while penalizing handovers and GS overload, using only UAM positions and velocities. To address the combinatorial scheduling problem, we propose GeoSetPPO, a geometry-aware set-attention proximal policy optimization (PPO) method that outputs per-UAM discrete association and subband decisions with permutation-invariant representations. Conditioned on each schedule, GS powers are computed by a per-slot successive convex approximation (SCA) module under per-GS power budgets and minimum signal-to-interference-plus-noise ratio (SINR) constraints. To reduce training cost and improve stability, we adopt a two-stage training strategy that transitions reward evaluation from uniform power to SCA-based power allocation. Simulations demonstrate stable convergence, higher returns than multi-layer perceptron (MLP)- and Transformer-based PPO under the considered training setting, and favorable reward and schedule-feasibility performance relative to algorithm-based and distance-based schedulers. In the larger evaluated network, GeoSetPPO also reduces the scheduling latency from 40.84 ms to 2.90 ms relative to the previous algorithm-based method.

eess.SP

Toward Quantum-Enhanced ISAC: Active-RIS-Aided Integrated Sensing and Communication with Rydberg Atomic Receivers

In this paper, we investigate an active-RIS (ARIS)-aided integrated sensing and communication (ISAC) system with Rydberg Atomic REceiver (RARE). Leveraging the magnitude-only and real-domain observation structure of RARE, we first derive a unified ISAC model, along with a closed-form Cramer-Rao bound (CRB) for direction-of-arrival (DoA) estimation. Based on this formulation, we propose a joint design of the {base station (BS)} beamforming and ARIS reflection coefficients to minimize the CRB under RARE-specific signal-to-interference-noise-ratio (SINR) and ARIS power constraints. To tackle the resulting highly non-convex problem, we develop an alternating optimization (AO) framework that combines semidefinite relaxation (SDR) for beamforming and a majorization-minimization (MM)-based approach for ARIS design. Numerical results demonstrate that the proposed RARE-aware framework significantly outperforms conventional RF-based designs and achieves performance close to the radar-only benchmark, highlighting the potential of RARE for quantum-enhanced ISAC with ARIS.

eess.SP

AI-Enhanced Wide-Area Data Imaging via Massive Non-Orthogonal Direct Device-to-HAPS Transmission

Massive Aerial Processing for X MAP-X is an innovative framework for reconstructing spatially correlated ground data, such as environmental or industrial measurements distributed across a wide area, into data maps using a single high altitude pseudo-satellite (HAPS) and a large number of distributed sensors. With subframe-level data reconstruction, MAP-X provides a transformative solution for latency-sensitive IoT applications. This article explores two distinct approaches for AI integration in the post-processing stage of MAP-X. The DNN-based pointwise estimation approach enables real-time, adaptive reconstruction through online training, while the CNN-based image reconstruction approach improves reconstruction accuracy through offline training with non-real-time data. Simulation results show that both approaches significantly outperform the conventional inverse discrete Fourier transform (IDFT)-based linear post-processing method. Furthermore, to enable AI-enhanced MAP-X, we propose a ground-HAPS cooperation framework, where terrestrial stations collect, process, and relay training data to the HAPS. With its enhanced capability in reconstructing field data, AI-enhanced MAP-X is applicable to various real-world use cases, including disaster response and network management.

eess.SP

A Generalized Pointing Error Model for FSO Links with Fixed-Wing UAVs for 6G: Analysis and Trajectory Optimization

Free-space optical (FSO) communication is a promising solution to support wireless backhaul links in emerging 6G non-terrestrial networks. At the link level, pointing errors in FSO links can significantly impact capacity, making accurate modeling of these errors essential for both assessing and enhancing communication performance. In this paper, we introduce a novel model for FSO pointing errors in unmanned aerial vehicles (UAVs) that incorporates three-dimensional (3D) jitter, including roll, pitch, and yaw angle jittering. We derive a probability density function for the pointing error angle based on the relative position and posture of the UAV to the ground station. This model is then integrated into a trajectory optimization problem designed to maximize energy efficiency while meeting constraints on speed, acceleration, and elevation angle. Our proposed optimization method significantly improves energy efficiency by adjusting the UAV's flight trajectory to minimize exposure to directions highly affected by jitter. The simulation results emphasize the importance of using UAV-specific 3D jitter models in achieving accurate performance measurements and effective system optimization in FSO communication networks. Utilizing our generalized model, the optimized trajectories achieve up to 11.8 percent higher energy efficiency compared to those derived from conventional Gaussian pointing error models.

eess.SY

A State-of-the-art Survey on Full-duplex Network Design

Full-duplex (FD) technology is gaining popularity for integration into a wide range of wireless networks due to its demonstrated potential in recent studies. In contrast to half-duplex (HD) technology, the implementation of FD in networks necessitates considering inter-node interference (INI) from various network perspectives. When deploying FD technology in networks, several critical factors must be taken into account. These include self-interference (SI) and the requisite SI cancellation (SIC) processes, as well as the selection of multiple user equipment (UE) per time slot. Additionally, inter-node interference (INI), including cross-link interference (CLI) and inter-cell interference (ICI), become crucial issues during concurrent uplink (UL) and downlink (DL) transmission and reception, similar to SI. Since most INI is challenging to eliminate, a comprehensive investigation that covers radio resource control (RRC), medium access control (MAC), and the physical layer (PHY) is essential in the context of FD network design, rather than focusing on individual network layers and types. This paper covers state-of-the-art studies, including protocols and documents from 3GPP for FD, MAC protocol, user scheduling, and CLI handling. The methods are also compared through a network-level system simulation based on 3D ray-tracing.

cs.NI

Pointing-and-Acquisition for Optical Wireless in 6G: From Algorithms to Performance Evaluation

The increasing demand for wireless communication services has led to the development of non-terrestrial networks, which enables various air and space applications. Free-space optical (FSO) communication is considered one of the essential technologies capable of connecting terrestrial and non-terrestrial layers. In this article, we analyze considerations and challenges for FSO communications between gateways and aircraft from a pointing-and-acquisition perspective. Based on the analysis, we first develop a baseline method that utilizes conventional devices and mechanisms. Furthermore, we propose an algorithm that combines angle of arrival (AoA) estimation through supplementary radio frequency (RF) links and beam tracking using retroreflectors. Through extensive simulations, we demonstrate that the proposed method offers superior performance in terms of link acquisition and maintenance.

eess.SP

Performance Analysis of Passive Retro-Reflector Based Tracking in Free-Space Optical Communications with Pointing Errors

In this correspondence, we propose a diversity-achieving retroreflector-based fine tracking system for free-space optical (FSO) communications. We show that multiple retroreflectors deployed around the communication telescope at the aerial vehicle save the payload capacity and enhance the outage performance of the fine tracking system. Through the analysis of the joint-pointing loss of the multiple retroreflectors, we derive the ordered moments of the received power. Our analysis can be further utilized for studies on multiple input multiple output (MIMO)-FSO. After the moment-based estimation of the received power distribution, we numerically analyze the outage performance. The greatest challenge of retroreflector-based FSO communication is a significant decrease in power. Still, our selected numerical results show that, from an outage perspective, the proposed method can surpass conventional methods.

cs.IT

Free-Space Optical Communications for 6G Wireless Networks: Challenges, Opportunities, and Prototype Validation

Numerous researchers have studied innovations in future sixth-generation (6G) wireless communications. Indeed, a critical issue that has emerged is to contend with society's insatiable demand for high data rates and massive 6G connectivity. Some scholars consider one innovation to be a breakthrough--the application of free-space optical (FSO) communication. Owing to its exceedingly high carrier frequency/bandwidth and the potential of the unlicensed spectrum domain, FSO communication provides an excellent opportunity to develop ultrafast data links that can be applied in a variety of 6G applications, including heterogeneous networks with enormous connectivity and wireless backhauls for cellular systems. In this study, we perform video signal transmissions via an FPGA-based FSO communication prototype to investigate the feasibility of an FSO link with a distance of up to 20~km. We use a channel emulator to reliably model turbulence, scintillation, and power attenuation of the long-range FSO channel. We use the FPGA-based real-time SDR prototype to process the transmitted and received video signals. Our study also presents the channel-generation process of a given long-distance FSO link. To enhance the link quality, we apply spatial selective filtering to suppress the background noise generated by sunlight. To measure the misalignment of the transceiver, we use sampling-based pointing, acquisition, and tracking to compensate for it by improving the signal-to-noise ratio. For the main video signal transmission testbed, we consider various environments by changing the amount of turbulence and wind speed. We demonstrate that the testbed even permits the successful transmission of ultra-high-definition (UHD: 3840 x 2160 resolution) 60 fps videos under severe turbulence and high wind speeds.

eess.SP

RF Lens Antenna Array-Based One-Shot Coarse Pointing for Hybrid RF/FSO Communications

Because of its high directivity, free-space optical (FSO) communication offers a number of advantages. It can, however, give rise to major system difficulties concerning alignment between two terminals. During the link-acquisition step (a.k.a. coarse pointing), a ground station can be prevented from acquiring optical links due to pointing errors and insufficient information about unmanned aerial vehicle locations. We propose, in this letter, a radio-frequency (RF) lens antenna array to increase the performance of coarse pointing in hybrid RF/FSO communications. The proposed algorithm using a novel closed-form angle estimator, compared to conventional methods, reduces the minimum outage probability by over a thousand times.

eess.SP

Demo: A Unified Platform of Free-Space Optics for High-Quality Video Transmission

In this paper, we investigate video signal transmission through an FPGA-based free-space optical (FSO) communication system prototype. We use a channel emulator that models the turbulence, scintillation, and power attenuation of the FSO channel and the FPGA-based real-time prototype for processing transmitted and received video signals. We vary the setup environment of the channel emulator by changing the amount of turbulence and wind speed. At the end of the demonstration, we show that through our testbed, even 4K ultra-high-definition (UHD) resolution video with 60 fps can be successfully transmitted under high turbulence and wind speed.

cs.NI