arXiv subjects

Hyunggyu Park

Publications and source records attributed to Hyunggyu Park.

At least 37 records · Page 2Linked to original sources

arXiv2021

Geometry-induced rectification for an active object

Study on a rectified current induced by active particles has received a great attention due to its possible application to a microscopic motor in biological environments. Insertion of an {\em asymmetric} passive object amid many active particles has been regarded as an essential ingredient for generating such a rectified motion. Here, we report that the reverse situation is also possible, where the motion of an active object can be rectified by its geometric asymmetry amid many passive particles. This may describe an unidirectional motion of polar biological agents with asymmetric shape. We also find a weak but less diffusive rectified motion in a {\em passive} mode without energy pump-in. This "moving by dissipation" mechanism could be used as a design principle for developing more reliable microscopic motors.

cond-mat.soft↗

arXiv2020

Brownian heat engine with active reservoirs

Microorganisms such as bacteria are active matters which consume chemical energy and generate their unique run-and-tumble motion. A swarm of such microorganisms provide a nonequilibrium active environment whose noise characteristics are different from those of thermal equilibrium reservoirs. One important difference is a finite persistence time, which is considerably large compared to that of the equilibrium noise, that is, the active noise is colored. Here, we study a mesoscopic energy-harvesting device (engine) with active reservoirs harnessing this noise nature. For a simple linear model, we analytically show that the engine efficiency can surpass the conventional Carnot bound, thus the power-efficiency tradeoff constraint is released, and the efficiency at the maximum power can overcome the Curzon-Ahlborn efficiency. We find that the supremacy of the active engine critically depends on the time-scale symmetry of two active reservoirs.

cond-mat.stat-mech↗

arXiv2020

Thermodynamic cost of synchronizing a population of beating cilia

Synchronization among arrays of beating cilia is one of the emergent phenomena in biological processes at meso-scopic scales. Strong inter-ciliary couplings modify the natural beating frequencies, $ω$, of individual cilia to produce a collective motion that moves around a group frequency $ω_m$. Here we study the thermodynamic cost of synchronizing cilia arrays by mapping their dynamics onto a generic phase oscillator model. The model suggests that upon synchronization the mean heat dissipation rate is decomposed into two contributions, dissipation from each cilium's own natural driving force and dissipation arising from the interaction with other cilia, the latter of which can be interpreted as the one produced by a potential with a time-dependent protocol in the framework of our model. The spontaneous phase-synchronization of beating dynamics of cilia induced by strong inter-ciliary coupling is always accompanied with a significant reduction of dissipation for the cilia population, suggesting that organisms as a whole expend less energy by attaining a temporal order. At the level of individual cilia, however, a population of cilia with $|ω|< ω_m$ expend more amount of energy upon synchronization.

cond-mat.stat-mech↗

arXiv2020

Exactly solvable two-terminal heat engine with asymmetric Onsager coefficients: Origin of the power-efficiency bound

An engine producing a finite power at the ideal (Carnot) efficiency is a dream engine, which is not prohibited by the thermodynamic second law. Some years ago, a two-terminal heat engine with {\em asymmetric} Onsager coefficients in the linear response regime was suggested by Benenti, Saito, and Casati [Phys. Rev. Lett. {\bf 106}, 230602 (2011)], as a prototypical system to make such a dream come true with non-divergent system parameter values. However, such a system has never been realized in spite of many trials. Here, we introduce an exactly solvable two-terminal Brownian heat engine with the asymmetric Onsager coefficients in the presence of a Lorenz (magnetic) force. Nevertheless, we show that the dream engine regime cannot be accessible even with the asymmetric Onsager coefficients, due to an instability keeping the engine from reaching its steady state. This is consistent with recent trade-off relations between the engine power and efficiency, where the (cyclic) steady-state condition is implicitly presumed. We conclude that the inaccessibility to the dream engine originates from the steady-state constraint on the engine.

cond-mat.stat-mech↗

arXiv2020

Active microrheology of a bulk metallic glass

The glass transition remains unclarified in condensed matter physics. Investigating the mechanical properties of glass is challenging because any global deformation that may result in shear rejuvenation requires an astronomical relaxation time. Moreover, it is well known that a glass is heterogeneous and a global perturbation cannot explore local mechanical/transport properties. However, an investigation based on a local probe, i.e. microrheology, may overcome these problems. Here, we establish active microrheology of a bulk metallic glass: a probe particle driven into host medium glass. This is a technique amenable for experimental investigations. We show that upon cooling the microscopic friction exhibits a second-order phase transition; this sheds light on the origin of friction in heterogeneous materials. Further, we provide distinct evidence to demonstrate that a strong relationship exists between the microscopic dynamics of the probe particle and the macroscopic properties of the host medium glass. These findings establish active microrheology as a promising technique for investigating the local properties of bulk metallic glass.

cond-mat.soft↗

arXiv2019

Two-dimensional Super-roughening in Three-dimensional Ising Model

We present a random-interface representation of the three-dimensional (3D) Ising model based on thermal fluctuations of a uniquely defined geometric spin cluster in the 3D model and its 2D cross section. Extensive simulations have been carried out to measure the global interfacial width as a function of temperature for different lattice sizes which is shown to signal the criticality of the model at $T_c$ by forming a size-independent cusp in 3D, along with an emergent super-roughening at its 2D cross section. We find that the super-rough state is accompanied by an intrinsic anomalous scaling behavior in the local properties characterized by a set of geometric exponents which are the same as those for a pure 2D Ising model.

cond-mat.stat-mech↗

arXiv2019

Thermodynamic uncertainty relation for underdamped Langevin systems driven by a velocity-dependent force

Recently, it has been shown that there is a trade-off relation between thermodynamic cost and current fluctuations, referred to as the thermodynamic uncertainty relation (TUR). The TUR has been derived for various processes, such as discrete-time Markov jump processes and overdamped Langevin dynamics. For underdamped dynamics, it has recently been reported that some modification is necessary for application of the TUR. In this study, we present a more generalized TUR, applicable to a system driven by a velocity-dependent force in the context of underdamped Langevin dynamics, by extending the theory of Vu and Hasegawa [preprint arXiv:1901.05715]. We show that our TUR accurately describes the trade-off properties of a molecular refrigerator (cold damping), Brownian dynamics in a magnetic field, and an active particle system.

cond-mat.stat-mech↗

arXiv2018

Carnot efficiency and zero-entropy-production rate do not guarantee reversibility of a process

Thermodynamic process at zero-entropy-production (EP) rate has been regarded as a reversible process. A process achieving the Carnot efficiency is also considered as a reversible process. Therefore, the condition, `Carnot efficiency at zero-EP rate' could be regarded as a strong equivalent condition for a reversible process. Here, however, we show that the detailed balance can be broken for a zero-EP rate process and even for a process achieving the Carnot efficiency at zero-EP rate in an example of a quantum-dot model. This clearly demonstrates that `Carnot efficiency at zero-EP rate' or just 'zero-EP rate' is not a sufficient condition for a reversible process.

cond-mat.stat-mech↗

arXiv2018

Three heats in strongly coupled system and bath

We investigate three kinds of heat produced in a system and a bath strongly coupled via an interaction Hamiltonian. By studying the energy flows between the system, the bath, and their interaction, we provide rigorous definitions of two types of heat, $Q_{\rm S}$ and $Q_{\rm B}$ from the energy loss of the system and the energy gain of the bath, respectively. This is in contrast to the equivalence of $Q_{\rm S}$ and $Q_{\rm B}$, which is commonly assumed to hold in the weak coupling regime. The bath we consider is equipped with a thermostat which enables it to reach an equilibrium. We identify another kind of heat $Q_{\rm SB}$ from the energy dissipation of the bath into the super bath that provides the thermostat. We derive the fluctuation theorems (FT's) with the system variables and various heats, which are discussed in comparison with the FT for the total entropy production. We take an example of a sliding harmonic potential of a single Brownian particle in a fluid and calculate the three heats in a simplified model. These heats are found to equal on average in the steady state of energy, but show different fluctuations at all times.

cond-mat.stat-mech↗

arXiv2018

Nonuniversality of heat engine efficiency at maximum power

We study the efficiency of a simple quantum dot heat engine at maximum power. In contrast to the quasi-statically operated Carnot engine whose efficiency reaches the theoretical maximum, recent research on more realistic engines operated in a finite time has revealed other classes of efficiencies such as the Curzon-Ahlborn efficiency maximizing the power. Such a power-maximizing efficiency has been argued to be always the half of the maximum efficiency up to the linear order near equilibrium under the tight-coupling condition between thermodynamic fluxes. We show, however, that this universality may break down for the quantum dot heat engine, depending on the constraint imposed on the engine control parameters (local optimization), even though the tight-coupling condition remains satisfied.It is shown that this deviation is critically related to the applicability of the linear irreversible thermodynamics.

cond-mat.stat-mech↗

arXiv2018

Characterizing the Nature of the Yielding Transition

Particulate matter, such as foams, emulsions, and granular materials, attain rigidity in a dense regime: the rigid phase can yield when a threshold force is applied. The rigidity transition in particulate matter exhibits {\it bona fide} scaling behavior near the transition point. However, a precise determination of exponents describing the rigidity transition has raised much controversy. Here, we pinpoint the causes of the controversies. We then establish a conceptual framework to quantify the critical nature of the yielding transition. Our results demonstrate that there is a spectrum of possible values for the critical exponents for which, without a robust framework, one cannot distinguish the genuine values of the exponents. Our approach is two-fold: ({\it i}) a precise determination of the transition density using rheological measurements and ({\it ii}) a matching rule that selects the critical exponents and rules out all other possibilities from the spectrum. This enables us to determine exponents with unprecedented accuracy and resolve the long-standing controversy over exponents of jamming. The generality of the approach paves the way to quantify the critical nature of many other types of rheological phase transitions such as those in oscillatory shearing.

cond-mat.soft↗

arXiv2018

Stochastic Thermodynamics and Hierarchy of Fluctuation Theorems with Multiple Reservoirs

We reformulate stochastic thermodynamics in terms of noise realizations for Langevin systems in contact with multiple reservoirs and investigated the structure of the second laws of thermodynamics. We derive a hierarchy of fluctuation theorems when one degree of freedom of the system is affected by multiple reservoirs simultaneously, that is, when noise mixing occurs. These theorems and the associated second laws of thermodynamics put stricter bounds on the thermodynamics of Langevin systems. We apply our results to a stochastic machine in noise-mixing environments and demonstrate that our new bounds play a crucial role in determining the potential function and performance of the machine.

cond-mat.stat-mech↗

arXiv2018

Additivity of multiple heat reservoirs in Langevin equation

The Langevin equation greatly simplifies the mathematical expression of the effects of thermal noise by using only two terms, a dissipation term, and a random-noise term. The Langevin description was originally applied to a system in contact with a single heat reservoir; however, many recent studies have also adopted a Langevin description for systems connected to multiple heat reservoirs. This is accomplished through the introduction of a simple summation for the dissipation and random-noise terms associated with each reservoir. However, the validity of this simple addition has been the focus of only limited discussion and has raised several criticisms. Moreover, this additive description has never been either experimentally or numerically verified, rendering its validity is still an open question. Here, we perform molecular dynamics simulations for a Brownian system in simultaneous contact with multiple heat reservoirs to check the validity of this additive approach. Our simulation results confirm that the effect of multiple heat reservoirs is additive in general. A very small deviation in the total amount of dissipation and associated noise is found, but seems not significant within statistical errors. We find that the steady-state properties satisfy the additivity perfectly and are not affected by this deviation.

cond-mat.stat-mech↗

arXiv2018

Entropy and Thermodynamic second laws: New perspective - stochastic thermodynamics and fluctuation theorems

Recently, there has been a considerable progress on the issue of the thermodynamic second law, which is known as the law of entropy increase or irreversibility. In particular, a novel symmetry known as the Gallavotti-Cohen symmetry is found in nonequilibrium (NEQ) fluctuations, which leads to so-called fluctuation theorems. The thermodynamic second law is a simple corollary of fluctuation theorems, from which one can predict quantitatively how often NEQ processes violate the law of entropy increase. Violations disappear in the thermodynamic limit, but can be observed reasonably well in small systems. In this article, we will briefly introduce the stochastic thermodynamics and derive various fluctuation theorems, including the total entropy production (EP), the work-free-energy relation, the excess and house-keeping EP, and the information entropy.

cond-mat.stat-mech↗

arXiv2017

Nonequilibrium steady states in Langevin thermal systems

Equilibrium is characterized by its fundamental properties such as the detailed balance, the fluctuation-dissipation relation, and no heat dissipation. Based on the stochastic thermodynamics, we show that these three properties are equivalent to each other in conventional Langevin thermal systems with microscopic reversibility. Thus, a conventional steady state has either all three properties (equilibrium) or none of them (nonequilibrium). In contrast, with velocity-dependent forces breaking the microscopic reversibility, we prove that the detailed balance and the fluctuation-dissipation relation mutually exclude each other and no equivalence relation is possible between any two of the three properties. This implies that a steady state of Langevin systems with velocity-dependent forces may maintain some equilibrium properties but not all of them. Our results are illustrated with a few example systems.

cond-mat.stat-mech↗

arXiv2017

Carnot efficiency is reachable in an irreversible process

In thermodynamics, there exists a conventional belief that "the Carnot efficiency is reachable only when a process is reversible." However, there is no theorem proving that the Carnot efficiency is unattainable in an irreversible process. Here, we show that the Carnot efficiency is reachable in an irreversible process through investigation of the Feynman-Smoluchowski ratchet (FSR). We also show that it is possible to enhance the efficiency by increasing the irreversibility. Our result opens a new possibility of designing an efficient heat engine in a highly irreversible process and also answers the long-standing question of whether the FSR can operate with the Carnot efficiency.

cond-mat.stat-mech↗

arXiv2016

Efficiency at the maximum power output for simple two-level heat engine

We introduce a simple two-level heat engine to study the efficiency in the condition of the maximum power output, depending on the energy levels from which the net work is extracted. In contrast to the quasi-statically operated Carnot engine whose efficiency reaches the theoretical maximum, recent research on more realistic engines operated in finite time has revealed other classes of efficiency such as the Curzon-Ahlborn efficiency maximizing the power output. We investigate yet another side with our heat engine model, which consists of pure relaxation and net work extraction processes from the population difference caused by different transition rates. Due to the nature of our model, the time-dependent part is completely decoupled from the other terms in the generated work. We derive analytically the optimal condition for transition rates maximizing the generated power output and discuss its implication on general premise of realistic heat engines. In particular, the optimal engine efficiency of our model is different from the Curzon-Ahlborn efficiency, although they share the universal linear and quadratic coefficients at the near-equilibrium limit. We further confirm our results by taking an alternative approach in terms of the entropy production at hot and cold reservoirs.

cond-mat.stat-mech↗

arXiv2016

Information thermodynamics for a multi-feedback process with time delay

We investigate a measurement-feedback process of repeated operations with time delay. During a finite-time interval, measurement on the system is performed and the feedback protocol derived from the measurement outcome is applied with time delay. This protocol is maintained into the next interval until a new protocol from the next measurement is applied. Unlike a feedback process without delay, both memories associated with previous and present measurement outcomes are involved in the system dynamics, which naturally brings forth a joint system described by a system state and two memory states. The thermodynamic second law provides a lower bound for heat flow into a thermal reservoir by the (3-state) Shannon entropy change of the joint system. However, as the feedback protocol depends on memory states sequentially, we can deduce a tighter bound for heat flow by integrating out irrelevant memory states during dynamics. As a simple example, we consider the so-called cold damping feedback process where the velocity of a particle is measured and a dissipative feedback protocol is applied to decelerate the particle. We confirm that the heat flow is well above the tightest bound. We also examine the long-time limit of this feedback process, which turns out to exhibit an interesting instability transition as well as heating by controlling parameters such as measurement errors, time interval, protocol strength, and time delay length. We discuss the underlying mechanism for instability and heating, which might be unavoidable in reality.

cond-mat.stat-mech↗