arXiv subjects

I. A. Abrikosov

Publications and source records attributed to I. A. Abrikosov.

At least 19 recordsLinked to original sources

arXiv2025

Controlled polymorphic competition -- a path to tough and hard ceramics

From nanoscale devices including sensors, electronics, or biocompatible coatings to macroscale structural, automotive or aerospace components, fundamental understanding of plasticity and fracture can guide the realization of materials that ensure safe and durable performance. Identifying the role of atomic-scale plasticity is crucial, especially for applications relying on brittle ceramics. Here, stress-intensity-controlled atomistic simulations of fracture in cubic Ti$_{1-x}$Al$_{x}$N model systems demonstrate how $\overset{\lower.5em\circ}{\mathrm{A}}$-scale plasticity - manifested as lattice distortions, phase transformation, nucleation and emission of dislocations - substantially affects the macroscale fracture toughness (K$_{Ic}$) and fracture strength ($σ$$_{f}$) of brittle ceramics. The extent of plastic deformation in Ti$_{1-x}$Al$_{x}$N increases monotonically with the Al content (x), due to a corresponding decrease in cubic $\rightarrow$ hexagonal polymorph transition energies and unstable stacking fault energies. Overall, plasticity positively affects the mechanical properties, resulting in optimal combinations of strength and toughness for x~0.6. However, for x exceeding ~0.7, the benefits of plasticity diminish. The initial rise followed by a decline in K$_{Ic}$(x) and $σ$$_{f}$(x) is explained based on the interplay between phase transformation, shear-induced faulting, and tensile cleavage on the easiest fracture plane. The results highlight the impact of atomic-scale plasticity on observable properties and point to strategies for toughening ceramics through control of polymorph competition.

cond-mat.mtrl-sci↗

arXiv2023

Descriptor for slip-induced crack-blunting in refractory ceramics

Understanding the competition between brittleness and plasticity in refractory ceramics is of importance for aiding design of hard materials with enhanced fracture resistance. Inspired by experimental observations of crack shielding due to dislocation activity in TiN ceramics [Int J Plast 27 (2011) 739], we carry out comprehensive atomistic investigations to identify mechanisms responsible for brittleness and slip-induced plasticity in Ti-N systems. First, we validate a semi-empirical interatomic potential against density-functional theory results of Griffith and Rice stress intensities for cleavage (KIc) and dislocation emission (KIe) as well as ab initio molecular dynamics mechanical-testing simulations of pristine and defective TiN lattices at temperatures between 300 and 1200 K. The calculated KIc and KIe values indicate intrinsic brittleness, as KIc<<KIe. However, KI-controlled molecular statics simulations - which reliably forecast macroscale mechanical properties through nanoscale modelling - reveal that slip-plasticity can be promoted by a reduced sharpness of the crack and/or the presence of anion vacancies. Classical molecular dynamics simulations of notched Ti-N supercell models subject to tension provide a qualitative understanding of the competition between brittleness and plasticity at finite temperatures. Although crack growth occurs in most cases, a sufficiently rapid accumulation of shear stress at the notch tip may postpone or prevent fracture via nucleation and emission of dislocations. Furthermore, we show that the probability to observe slip-induced plasticity leading to crack-blunting in flawed Ti-N lattices correlates with the ideal tensile/shear strength ratio (Iplast) of pristine Ti-N crystals. We propose that the Iplast descriptor should be considered for ranking the ability of ceramics to blunt cracks via dislocation-mediated plasticity at finite temperatures.

cond-mat.mtrl-sci↗

arXiv2023

High temperature decomposition and age hardening of single-phase wurtzite Ti$_{1-x}$Al$_{x}$N thin films grown by cathodic arc deposition

We investigated the high temperature decomposition behavior of wurtzite phase Ti$_{1-x}$Al$_{x}$N films using experimental methods and first-principles calculations. Single phase metastable wurtzite Ti$_{1-x}$Al$_{x}$N (x = 0.65, 0.75, 085 and 0.95) solid solution films were grown by cathodic arc deposition using low duty cycle pulsed substrate-bias voltage. First-principles calculated elastic constants of the wurtzite Ti$_{1-x}$Al$_{x}$N phase show a strong dependence on alloy composition. The predicted phase diagram shows a miscibility gap with an unstable region. High resolution scanning transmission electron microscopy and chemical mapping demonstrate decomposition of the films after high temperature annealing (950$^{\circ}$C), which resulted in nanoscale chemical compositional modulations containing Ti-rich and Al-rich regions with coherent or semi coherent interfaces. This spinodal decomposition of the wurtzite film causes age hardening of 1-2 GPa.

cond-mat.mtrl-sci↗

arXiv2022

Elucidating dislocation core structures in titanium nitride through high-resolution imaging and atomistic simulations

Although titanium nitride (TiN) is among the most extensively studied and thoroughly characterized thin-film ceramic materials, detailed knowledge of relevant dislocation core structures is lacking. By high-resolution scanning transmission electron microscopy (STEM) of epitaxial single crystal (001)-oriented TiN films, we identify different dislocation types and their core structures. These include, besides the expected primary full a/2{110}<1$\bar{1}$0> dislocation, Shockley partial dislocations a/6{111}<11$\bar{2}$> and sessile Lomer edge dislocations a/2{100}<011>. Density-functional theory and classical interatomic potential simulations complement STEM observations by recovering the atomic structure of the different dislocation types, estimating Peierls stresses, and providing insights on the chemical bonding nature at the core. The generated models of the dislocation cores suggest locally enhanced metal-metal bonding, weakened Ti-N bonds, and N vacancy-pinning that effectively reduces the mobilities of {110}<1$\bar{1}$0> and {111}<11$\bar{2}$> dislocations. Our findings underscore that the presence of different dislocation types and their effects on chemical bonding should be considered in the design and interpretations of nanoscale and macroscopic properties of TiN.

cond-mat.mtrl-sci↗

arXiv2022

Correlation strength, orbital-selective incoherence, and local moments formation in the magnetic MAX-phase Mn$_2$GaC

We perform a theoretical study of the electronic structure and magnetic properties of the prototypical magnetic MAX-phase Mn$_2$GaC with the main focus given to the origin of magnetic interactions in this system. Using the density functional theory+dynamical mean-field theory (DFT+DMFT) method we explore the effects of electron-electron interactions and magnetic correlations on the electronic properties, magnetic state, and spectral weight coherence of paramagnetic and magnetically-ordered phases of Mn$_2$GaC. We also benchmark the DFT-based disordered local moment approach for this system by comparing the obtained electronic and magnetic properties with that of the DFT+DMFT method. Our results reveal a complex magnetic behavior characterized by a near degeneracy of the ferro- and antiferromagnetic configurations of Mn$_2$GaC, implying a high sensitivity of its magnetic state to fine details of the crystal structure and unit-cell volume, consistent with experimental observations. We observe robust local-moment behavior and orbital-selective incoherence of the spectral properties of Mn$_2$GaC, implying the importance of orbital-dependent localization of the Mn $3d$ states. We find that Mn$_2$GaC can be described in terms of local magnetic moments, which may be modeled by DFT with disordered local moments. However, the magnetic properties are dictated by the proximity to the regime of formation of local magnetic moments, in which the localization is in fact driven by the Hund's exchange interaction, and not the Coulomb interaction.

cond-mat.str-el↗

arXiv2021

Predicting properties of hard-coating alloys using ab-initio and machine learning methods

Accelerated design of novel hard coating materials requires state-of-the-art computational tools, which include data-driven techniques, building databases, and training machine learning models against the databases. In this work, we present a development of a heavily automated high-throughput workflow to build a database of industrially relevant hard coating materials, such as binary and ternary nitrides. We use Vienna Ab initio Simulation package as the density functional theory calculator and the high-throughput toolkit to automate the calculation workflow. We calculate and present results, including the elastic constants, one of the key materials parameter that determines mechanical properties of the coatings, for X(1-x)Y(x)N binary and ternary nitrides, where X,Y in {Al, Ti, Zr, Hf} and fraction x = 0, 1/4, 1/2, 3/4, 1. We explore ways for ML techniques to support and complement the designed databases. We find that the crystal graph convolutional neural network model trained on Materials Project data for ordered lattices has sufficient prediction accuracy for the disordered nitrides, suggesting that the existing databases provide important data for predicting mechanical properties of qualitatively different type of material systems, in our case hard coating alloys, not included in the original dataset.

cond-mat.mtrl-sci↗

arXiv2020

Temperature-dependent elastic properties of binary and multicomponent high-entropy refractory carbides

Available information concerning the elastic moduli of refractory carbides at temperatures (T) of relevance for practical applications is sparse and/or inconsistent. We carry out ab initio molecular dynamics (AIMD) simulations at T = 300, 600, 900, and 1200 K to determine the temperature-dependences of the elastic constants of rocksalt-structure (B1) TiC, ZrC, HfC, VC, and TaC compounds as well as multicomponent high-entropy carbides (Ti,Zr,Hf,Ta,W)C and (V,Nb,Ta,Mo,W)C. The second order elastic constants are calculated by least-square fitting of the analytical expressions of stress vs. strain relationships to simulation results obtained from three tensile and three shear deformation modes. Moreover, we employ sound velocity measurements to evaluate the bulk, shear, elastic moduli and Poisson's ratios of single-phase B1 (Ti,Zr,Hf,Ta,W)C and (V,Nb,Ta,Mo,W)C at ambient conditions. Our experimental results are in excellent agreement with the values obtained by AIMD simulations. In comparison with the predictions of previous ab initio calculations - where the extrapolation of finite-temperature elastic properties accounted for thermal expansion while neglecting intrinsic vibrational effects - AIMD simulations produce a softening of elastic moduli with T in closer agreement with experiments. Results of our simulations show that TaC is the system which exhibits the highest elastic resistances to both tensile and shear deformation up to 1200 K, and identify the high-entropy (V,Nb,Ta,Mo,W)C system as candidate for applications that require good ductility and toughness at room as well as elevated temperatures.

cond-mat.mtrl-sci↗

arXiv2020

Revealing the complex nature of bonding in binary high-pressure compound FeO$_2$

Extreme pressures and temperatures are known to drastically affect the chemistry of iron oxides resulting in numerous compounds forming homologous series $n$FeO$\cdot m$Fe$_2$O$_3$ and the appearance of FeO$_2$. Here, based on the results of \emph{in situ} single-crystal X-ray diffraction, Mössbauer spectroscopy, X-ray absorption spectroscopy, and DFT+dynamical mean-field theory calculations we demonstrate that iron in high pressure cubic FeO$_2$ and isostructural FeO$_2$H$_{0.5}$ is ferric (Fe$^{3+}$), and oxygen has a formal valence less than two. Reduction of oxygen valence from 2, common for oxides, down to 1.5 can be explained by a formation of a localized hole at oxygen sites.

physics.geo-ph↗

arXiv2020

Emergence of quantum critical charge and spin-state fluctuations near the pressure-induced Mott transition in MnO, FeO, CoO, and NiO

We perform a comprehensive theoretical study of the pressure-induced evolution of the electronic structure, magnetic state, and phase stability of the late transition metal monoxides MnO, FeO, CoO, and NiO using a fully charge self-consistent DFT+dynamical mean-field theory method. Our results reveal that the pressure-induced Mott insulator-to-metal phase transition in MnO-NiO is accompanied by a simultaneous collapse of local magnetic moments and lattice volume, implying a complex interplay between chemical bonding and electronic correlations. We compute the pressure-induced evolution of relative weights of the different valence states and spin-state configurations. Employing the concept of fluctuating valence in a correlated solid, we demonstrate that in MnO, FeO, and CoO a Mott insulator-metal transition and collapse of the local moments is accompanied by a sharp crossover of the spin-state and valence configurations. Our microscopic explanation of the magnetic collapse differs from the accepted picture and points out a remarkable dynamical coexistence (frustration) of the high-, intermediate-, and low-spin states. In particular, in MnO, the magnetic collapse is found to be driven by the appearance of the intermediate-spin state (IS), competing with the low-spin (LS) state; in FeO, we observe a conventional high-spin to low-spin (HS-LS) crossover. Most interestingly, in CoO, we obtain a remarkable (dynamical) coexistence of the HS and LS states, i.e., a HS-LS frustration, up to high pressure. Our results demonstrate the importance of quantum fluctuations of the valence and spin states for the understanding of quantum criticality of the Mott transitions.

cond-mat.str-el↗

arXiv2020

Quantum well stabilized point defect spin qubits

Defect-based quantum systems in in wide bandgap semiconductors are strong candidates for scalable quantum-information technologies. However, these systems are often complicated by charge-state instabilities and interference by phonons, which can diminish spin-initialization fidelities and limit room-temperature operation. Here, we identify a pathway around these drawbacks by showing that an engineered quantum well can stabilize the charge state of a qubit. Using density-functional theory and experimental synchrotron x-ray diffraction studies, we construct a model for previously unattributed point defect centers in silicon carbide (SiC) as a near-stacking fault axial divacancy and show how this model explains these defect's robustness against photoionization and room temperature stability. These results provide a materials-based solution to the optical instability of color centers in semiconductors, paving the way for the development of robust single-photon sources and spin qubits.

cond-mat.mes-hall↗

arXiv2020

Strength, transformation toughening and fracture dynamics of rocksalt-structure Ti1-xAlxN (0 <= x <= 0.75) alloys

Ab initio-calculated ideal strength and toughness describe the upper limits for mechanical properties attainable in real systems and can, therefore, be used in selection criteria for materials design. We employ density-functional ab initio molecular dynamics (AIMD) to investigate the mechanical properties of defect-free rocksalt-structure (B1) TiN and B1 Ti1-xAlxN (x = 0.25, 0.5, 0.75) solid solutions subject to [001], [110], and [111] tensile deformation at room temperature. We determine the alloys' ideal strength and toughness, elastic responses, and ability to plastically deform up to fracture as a function of the Al content. Overall, TiN exhibits greater ideal moduli of resilience and tensile strengths than TiAlN solid solutions. Nevertheless, AIMD modelingshows that, irrespective of the strain direction, the binary compound systematically fractures by brittle cleavage at its yield point. The simulations also indicate that Ti0.5Al0.5N and Ti0.25Al0.75N solid solutions are inherently more resistant to fracture and possess much greater toughness than TiN, due to the activation of local structural transformations (primarily of B1 -> wurtzite type) beyond the elastic-response regime. In sharp contrast, TiAlN alloys with 25% Al exhibit similar brittleness as TiN. The results of this work are examples of the limitations of elasticity-based criteria for prediction of strength, brittleness, ductility, and toughness in materials able to undergo phase transitions with loading. Furthermore, comparing present and previous findings, we suggest a general principle for design of hard ceramic solid solutions that are thermodynamically inclined to dissipate extreme mechanical stresses via transformation toughening mechanisms.

cond-mat.mtrl-sci↗

arXiv2019

Charge disproportionation and site-selective local magnetic moments in the post-perovskite-type Fe$_2$O$_3$ under ultra-high pressures

The archetypal $3d$ Mott insulator hematite, Fe$_2$O$_3$, is one of the basic oxide components playing an important role in mineralogy of Earth's lower mantle. Its high pressure-temperature behavior, such as the electronic properties, equation of state, and phase stability is of fundamental importance for understanding the properties and evolution of the Earth's interior. Here, we study the electronic structure, magnetic state, and lattice stability of Fe$_2$O$_3$ at ultra-high pressures using the density functional plus dynamical mean-field theory (DFT+DMFT) approach. In the vicinity of a Mott transition, Fe$_2$O$_3$ is found to exhibit a series of complex electronic, magnetic, and structural transformations. In particular, it makes a phase transition to a metal with a post-perovskite crystal structure and site-selective local moments upon compression above 75 GPa. We show that the site-selective phase transition is accompanied by a charge disproportionation of Fe ions, with Fe$^{3\pm δ}$ and $δ\sim 0.05$-$0.09$, implying a complex interplay between electronic correlations and the lattice. Our results suggest that site-selective local moments in Fe$_2$O$_3$ persist up to ultra-high pressures of $\sim$200-250 GPa, i.e., sufficiently above the core-mantle boundary. The latter can have important consequences for understanding of the velocity and density anomalies in the Earth's lower mantle.

cond-mat.str-el↗

arXiv2019

Superionic-like diffusion in an elemental crystal: bcc Titanium

Recent theoretical investigations [Belonoshko et al. Nature Geoscience 10, 312 (2017)] revealed occurrence of concerted migration of several atoms in bcc Fe at inner-core temperatures and pressures. Here, we combine first-principles and semi-empirical atomistic simulations to show that a diffusion mechanism analogous to the one predicted for bcc iron at extreme conditions is also operative and of relevance for the high-temperature bcc phase of pure Ti at ambient pressure. The mechanism entails a rapid collective movement of numerous (from two to dozens) neighbors along tangled closed-loop paths in defect-free crystal regions. We argue that this phenomenon closely resembles the diffusion behavior of superionics and liquid metals. Furthermore, we suggest that concerted migration is the atomistic manifestation of vanishingly small w-mode phonon frequencies previously detected via neutron scattering and the mechanism underlying anomalously large and markedly non-Arrhenius self-diffusivities characteristic of bcc Ti.

cond-mat.mtrl-sci↗

arXiv2018

Assessing the SCAN functional for itinerant electron ferromagnets

Density functional theory is a standard model for condensed matter theory and computational material science. The accuracy of density functional theory is limited by accuracy of the employed approximation to the exchange-correlation functional. Recently, the so-called strongly constrained approprietly normed (SCAN) functional has received a lot of attention due to promising results for covalent, metallic, ionic, as well as hydrogen- and van der Waals-bonded systems alike. In this work we focus on assessing the performance of the SCAN functional for itinerant magnets by calculating basic structural and magnetic properties of the transition metals Fe, Co and Ni. We find that although structural properties of bcc-Fe seem to be in good agreement with experiment, SCAN performs worse than standard local and semilocal functionals for fcc-Ni and hcp-Co. In all three cases, the magnetic moment is significantly overestimated by SCAN, and the $3d$ states are shifted to lower energies, as compared to experiments.

cond-mat.mtrl-sci↗

arXiv2017

Theoretical and experimental evidence of a site-selective Mott transition in Fe2O3 under pressure

We provide experimental and theoretical evidence for a novel type of pressure-induced insulator-metal transition characterized by site-selective delocalization of the electrons. Mössbauer spectroscopy, X-ray diffraction and electrical transport measurements on Fe$_2$O$_3$ to 100 GPa, along with dynamical mean-field theory (DFT+DMFT) calculations, reveal this site-selective Mott transition between 50 and 68 GPa, such that the metallization can be described by ($^\rm{VI}$Fe$^{3+\rm{HS}}$)$_2$O$_3$ [$R\bar{3}c$ structure] $\overrightarrow{\tiny\rm{50~GPa}}$ ($^\rm{VIII}$Fe$^{3+\rm{HS~VI}}$Fe$^\rm{M}$)O$_3$ [$P2_1/n$ structure] $\overrightarrow{\tiny\rm{68~GPa}}$ ($^\rm{VI}$Fe$^\rm{M}$)$_2$O$_3$ [$Aba2$ structure]. Within the $P2_1/n$ crystal structure, characterized by two distinct coordination sites (VI and VIII), we observe equal abundances of ferric ions (Fe$^{3+}$) and ions having delocalized electrons (Fe$^\rm{M}$), and only at higher pressures is a fully metallic $Aba2$ structure obtained, all at room temperature. The transition is characterized by delocalization/metallization of the $3d$ electrons on half the Fe sites, with a site-dependent collapse of local moments. Above $\sim$50 GPa, Fe$_2$O$_3$ is a strongly correlated metal with reduced electron mobility (large band renormalizations) of m*/m$\sim$4 and 6 near the Fermi level. Upon decompression, we observe a site-selective (metallic) to conventional Mott insulator phase transition ($^\rm{VIII}$Fe$^{3+\rm{HS~VI}}$Fe$^\rm{M}$)O$_3$ $\overrightarrow{\tiny\rm{50~GPa}}$ ($^\rm{VIII}$Fe$^{3+\rm{HS~VI}}$Fe$^{3+ \rm{HS}}$)O$_3$ within the same $P2_1/n$ structure, indicating a decoupling of the electronic and lattice degrees of freedom, characteristic of a true Mott transition. Our results show that the interplay of electronic correlations and lattice may result in rather complex behavior of the electronic structure and magnetic state.

cond-mat.str-el↗

arXiv2017

Pressure-induced spin-state transition of iron in magnesiowüstite (Fe,Mg)O

We present a detailed theoretical study of the electronic, magnetic, and structural properties of magnesiowüstite Fe$_{1-x}$Mg$_x$O with $x$ in the range between 0$-$0.875 using a fully charge self-consistent implementation of the density functional theory plus dynamical mean-field theory (DFT+DMFT) method. In particular, we compute the electronic structure and phase stability of the rock-salt B1-structured (Fe,Mg)O at high pressures relevant for the Earth's lower mantle. We obtain that upon compression paramagnetic (Fe,Mg)O exhibits a spin-state transition of Fe$^{2+}$ ions from a high-spin to low-spin (HS-LS) state which is accompanied by a collapse of local magnetic moments. The HS-LS transition results in a substantial drop of the lattice volume by about 4$-$8 %, implying a complex interplay between electronic and lattice degrees of freedom. Our results reveal a strong sensitivity of the calculated transition pressure $P_{\rm tr.}$ upon addition of Mg. While for Fe-rich magnesiowüstite, Mg $x < 0.5$, $P_{\rm tr.}$ exhibits a rather weak variation at $\sim$80 GPa, for Fe-poor (Fe,Mg)O it drops, e.g., by about 35 % to 52 GPa for Mg $x=0.75$. This behavior is accompanied by a substantial change of the spin transition range from 50$-$140 GPa in FeO to 30$-$90 GPa for $x=0.75$. In addition, the calculated bulk modulus (in the HS state) is found to increase by $\sim$12 % from 142 GPa in FeO to 159 GPa in (Fe,Mg)O with Mg $x=0.875$. We find that the pressure-induced HS-LS transition has different consequences for the electronic properties of the Fe-rich and poor (Fe,Mg)O. For the Fe-rich (Fe,Mg)O, the transition is found to be accompanied by a Mott insulator to (semi-) metal phase transition. In contrast to that, for $x>0.25$, (Fe,Mg)O remains insulating up to the highest studied pressures, implying a Mott insulator to band insulator phase transition at the HS-LS transformation.

cond-mat.str-el↗

arXiv2016

Magnetic Collapse and the Behavior of Transition Metal Oxides at High Pressure

We report a detail theoretical study of the electronic structure and phase stability of transition metal oxides MnO, FeO, CoO, and NiO in their paramagnetic cubic B1 structure by employing dynamical mean-field theory of correlated electrons combined with \emph{ab initio} band structure methods (DFT+DMFT). Our calculations reveal that under pressure these materials exhibit a Mott insulator-metal transition (IMT) which is accompanied by a simultaneous collapse of local magnetic moments and lattice volume, implying a complex interplay between chemical bonding and electronic correlations. Moreover, our results for the transition pressure show a monotonous decrease from ~ 145 GPa to 40 GPa, upon moving from MnO to CoO. In contrast to that, in NiO, magnetic collapse is found to occur at remarkably higher pressure of ~ 429 GPa. We provide a unified picture of such a behavior and suggest that it is primary a localized to itinerant moment behavior transition at the IMT that gives rise to magnetic collapse in transition metal oxides.

cond-mat.str-el↗

arXiv2016

Fermi-liquid behavior and thermal conductivity of ε-iron at Earth's core conditions

The electronic state and transport properties of hot dense iron are of the utmost importance to geophysics. Combining the density functional and dynamical mean field theories we study the impact of electron correlations on electrical and thermal resistivity of hexagonal close-packed $ε$-Fe at Earth's core conditions. $ε$-Fe is found to behave as a nearly perfect Fermi liquid. The quadratic dependence of the scattering rate in Fermi liquids leads to a modification of the Wiedemann-Franz law with suppression of the thermal conductivity as compared to the electrical one. This significantly increases the electron-electron thermal resistivity which is found to be of comparable magnitude to the electron-phonon one. The implications of this effect on the dynamics of Earth's core is discussed.

cond-mat.str-el↗