Searcharxiv⌕ Search

arXiv subjects

I. A. Walmsley

Publications and source records attributed to I. A. Walmsley.

At least 73 records · Page 4Linked to original sources

Measuring Measurement: Theory and Practice

Recent efforts have applied quantum tomography techniques to the calibration and characterization of complex quantum detectors using minimal assumptions. In this work we provide detail and insight concerning the formalism, the experimental and theoretical challenges and the scope of these tomographical tools. Our focus is on the detection of photons with avalanche photodiodes and photon number resolving detectors and our approach is to fully characterize the quantum operators describing these detectors with a minimal set of well specified assumptions. The formalism is completely general and can be applied to a wide range of detectors

quant-ph↗

Quantum phase estimation with lossy interferometers

We give a detailed discussion of optimal quantum states for optical two-mode interferometry in the presence of photon losses. We derive analytical formulae for the precision of phase estimation obtainable using quantum states of light with a definite photon number and prove that maximization of the precision is a convex optimization problem. The corresponding optimal precision, i.e. the lowest possible uncertainty, is shown to beat the standard quantum limit thus outperforming classical interferometry. Furthermore, we discuss more general inputs: states with indefinite photon number and states with photons distributed between distinguishable time bins. We prove that neither of these is helpful in improving phase estimation precision.

quant-ph↗

Absolute efficiency estimation of photon-number-resolving detectors using twin beams

A nonclassical light source is used to demonstrate experimentally the absolute efficiency calibration of a photon-number-resolving detector. The photon-pair detector calibration method developed by Klyshko for single-photon detectors is generalized to take advantage of the higher dynamic range and additional information provided by photon-number-resolving detectors. This enables the use of brighter twin-beam sources including amplified pulse pumped sources, which increases the relevant signal and provides measurement redundancy, making the calibration more robust.

quant-ph↗

A proposed testbed for detector tomography

Measurement is the only part of a general quantum system that has yet to be characterized experimentally in a complete manner. Detector tomography provides a procedure for doing just this; an arbitrary measurement device can be fully characterized, and thus calibrated, in a systematic way without access to its components or its design. The result is a reconstructed POVM containing the measurement operators associated with each measurement outcome. We consider two detectors, a single-photon detector and a photon-number counter, and propose an easily realized experimental apparatus to perform detector tomography on them. We also present a method of visualizing the resulting measurement operators.

quant-ph↗

Optimal Quantum Phase Estimation

By using a systematic optimization approach we determine quantum states of light with definite photon number leading to the best possible precision in optical two mode interferometry. Our treatment takes into account the experimentally relevant situation of photon losses. Our results thus reveal the benchmark for precision in optical interferometry. Although this boundary is generally worse than the Heisenberg limit, we show that the obtained precision beats the standard quantum limit thus leading to a significant improvement compared to classical interferometers. We furthermore discuss alternative states and strategies to the optimized states which are easier to generate at the cost of only slightly lower precision.

quant-ph↗

Multimode Memories in Atomic Ensembles

The ability to store multiple optical modes in a quantum memory allows for increased efficiency of quantum communication and computation. Here we compute the multimode capacity of a variety of quantum memory protocols based on light storage in ensembles of atoms. We find that adding a controlled inhomogeneous broadening improves this capacity significantly.

quant-ph↗

Photon Number Statistics of Multimode Parametric Down-Conversion

We experimentally analyze the complete photon number statistics of parametric downconversion and ascertain the influence of multimode effects. Our results clearly reveal a difference between single mode theoretical description and the measured distributions. Further investigations assure the applicability of loss-tolerant photon number reconstruction and prove strict photon number correlation between signal and idler modes.

quant-ph↗

Decoherence measurement of single phonons using spectral interference

A technique to measure the decoherence time of optical phonons in a solid is presented. Phonons are excited with a pair of time delayed 80 fs, near infrared pulses via spontaneous, transient Raman scattering. The fringe visibility of the resulting Stokes pulse pair, as a function of time delay, is used to measure the phonon dephasing time. The method avoids the need to use either narrow band or few femtosecond pulses and is useful for low phonon excitations. The dephasing time of phonons created in bulk diamond is measured to be tau = 6.8ps (1.56cm-1).

quant-ph↗

Measuring measurement

Measurement connects the world of quantum phenomena to the world of classical events. It plays both a passive role, observing quantum systems, and an active one, preparing quantum states and controlling them. Surprisingly - in the light of the central status of measurement in quantum mechanics - there is no general recipe for designing a detector that measures a given observable. Compounding this, the characterization of existing detectors is typically based on partial calibrations or elaborate models. Thus, experimental specification (i.e. tomography) of a detector is of fundamental and practical importance. Here, we present the realization of quantum detector tomography: we identify the optimal positive-operator-valued measure describing the detector, with no ancillary assumptions. This result completes the triad, state, process, and detector tomography, required to fully specify an experiment. We characterize an avalanche photodiode and a photon number resolving detector capable of detecting up to eight photons. This creates a new set of tools for accurately detecting and preparing non-classical light.

quant-ph↗

Creating diamond color centers for quantum optical applications

Nitrogen vacancy (NV) centers in diamond have distinct promise as solid-state qubits. This is because of their large dipole moment, convenient level structure and very long room-temperature coherence times. In general, a combination of ion irradiation and subsequent annealing is used to create the centers, however for the rigorous demands of quantum computing all processes need to be optimized, and decoherence due to the residual damage caused by the implantation process itself must be mitigated. To that end we have studied photoluminescence (PL) from NV$^-$, NV$^0$ and GR1 centers formed by ion implantation of 2MeV He ions over a wide range of fluences. The sample was annealed at $600^{\circ}$C to minimize residual vacancy diffusion, allowing for the concurrent analysis of PL from NV centers and irradiation induced vacancies (GR1). We find non-monotic PL intensities with increasing ion fluence, monotonic increasing PL in NV$^0$/NV$^-$ and GR1/(NV$^0$ + NV$^1$) ratios, and increasing inhomogeneous broadening of the zero-phonon lines with increasing ion fluence. All these results shed important light on the optimal formation conditions for NV qubits. We apply our findings to an off-resonant photonic quantum memory scheme using vibronic sidebands.

quant-ph↗

Efficient spatially-resolved multimode quantum memory

We propose a method that enables efficient storage and retrieval of a photonic excitation stored in an ensemble quantum memory consisting of Lambda-type absorbers with non-zero Stokes shift. We show that this can be used to implement a multimode quantum memory storing multiple frequency-encoded qubits in a single ensemble, and allowing their selective retrieval. The read-out scheme applies to memory setups based on both electromagnetically-induced transparency and stimulated Raman scattering, and spatially separates the output signal field from the control fields.

quant-ph↗

Photon pair-state preparation with tailored spectral properties by spontaneous four-wave mixing in photonic-crystal fiber

We study theoretically the generation of photon pairs by spontaneous four-wave mixing (SFWM) in photonic crystal optical fiber. We show that it is possible to engineer two-photon states with specific spectral correlation (``entanglement'') properties suitable for quantum information processing applications. We focus on the case exhibiting no spectral correlations in the two-photon component of the state, which we call factorability, and which allows heralding of single-photon pure-state wave packets without the need for spectral post filtering. We show that spontaneous four wave mixing exhibits a remarkable flexibility, permitting a wider class of two-photon states, including ultra-broadband, highly-anticorrelated states.

quant-ph↗

Modematching an optical quantum memory

We analyse the off-resonant Raman interaction of a single broadband photon, copropagating with a classical `control' pulse, with an atomic ensemble. It is shown that the classical electrodynamical structure of the interaction guarantees canonical evolution of the quantum mechanical field operators. This allows the interaction to be decomposed as a beamsplitter transformation between optical and material excitations on a mode-by-mode basis. A single, dominant modefunction describes the dynamics for arbitrary control pulse shapes. Complete transfer of the quantum state of the incident photon to a collective dark state within the ensemble can be achieved by shaping the control pulse so as to match the dominant mode to the temporal mode of the photon. Readout of the material excitation, back to the optical field, is considered in the context of the symmetry connecting the input and output modes. Finally, we show that the transverse spatial structure of the interaction is characterised by the same mode decomposition.

quant-ph↗

Measurement of the transverse spatial quantum state of light at the single-photon level

We present an experimental method to measure the transverse spatial quantum state of an optical field in coordinate space at the single-photon level. The continuous-variable measurements are made with a photon-counting, parity-inverting Sagnac interferometer based on all-reflecting optics. The technique provides a large numerical aperture without distorting the shape of the wave front, does not introduce astigmatism, and allows for characterization of fully or partially coherent optical fields at the single-photon level. Measurements of the transverse spatial Wigner functions for highly attenuated coherent beams are presented and compared to theoretical predictions.

quant-ph↗

Pure-state single-photon wave-packet generation by parametric down conversion in a distributed microcavity

We propose an optical parametric down conversion (PDC) scheme that does not suffer a trade-off between the state-purity of single-photon wave-packets and the rate of packet production. This is accomplished by modifying the PDC process by using a microcavity to engineer the density of states of the optical field at the PDC frequencies. The high-finesse cavity mode occupies a spectral interval much narrower than the bandwidth of the pulsed pump laser field, suppressing the spectral correlation, or entanglement, between signal and idler photons. Spectral filtering of the field occurs prior to photon creation rather than afterward as in most other schemes. Operator-Maxwell equations are solved to find the Schmidt-mode decomposition of the two-photon states produced. Greater than 99% pure-state packet production is predicted to be achievable.

quant-ph↗

Photon engineering for quantum information processing

We study distinguishing information in the context of quantum interference involving more than one parametric downconversion (PDC) source and in the context of polarization-entangled photon pairs based on PDC. We arrive at specific design criteria for two-photon sources so that when used as part of complex optical systems, such as photon-based quantum information processing schemes, distinguishing information between the photons is eliminated guaranteeing high visibility interference. We propose practical techniques which lead to suitably engineered two-photon states that can be realistically implemented with available technology. Finally, we study an implementation of the nonlinear-sign shift (NS) logic gate with PDC sources and show the effect of distinguishing information on the performance of the gate.

quant-ph↗

Quantum Limits of Stochastic Cooling of a Bosonic Gas

The quantum limits of stochastic cooling of trapped atoms are studied. The energy subtraction due to the applied feedback is shown to contain an additional noise term due to atom-number fluctuations in the feedback region. This novel effect is shown to dominate the cooling efficiency near the condensation point. Furthermore, we show first results that indicate that Bose--Einstein condensation could be reached via stochastic cooling.

quant-ph↗

Comment on "Proposal for the Measurement of Bell-Type Correlations from Continuous Variables"

In a recent paper [T. C. Ralph, W. J. Munro, R. E. S. Polkinghorne, Phys. Rev. Lett. 85, 2035 (2000)], the authors propose a test for Bell's inequalities based on quadrature measurements for a correlated parametric source. We present here a local hidden variable model which reproduces all the expectation values predicted in the described experimental scheme, and point out that the proposal is based on an inconsistent use of Bell's inequalities.

quant-ph↗