arXiv subjects

I. Goykhman

Publications and source records attributed to I. Goykhman.

11 recordsLinked to original sources

arXiv2023

Graphene-perovskite fibre photodetectors

The integration of optoelectronic devices, such as transistors and photodetectors (PDs), into wearables and textiles is of great interest for applications such as healthcare and physiological monitoring. These require flexible/wearable systems adaptable to body motions, thus materials conformable to non-planar surfaces, and able to maintain performance under mechanical distortions. Here, we prepare fibre PDs combining rolled graphene layers and photoactive perovskites. Conductive fibres ($\sim$500$\Omega$/cm) are made by rolling single layer graphene (SLG) around silica fibres, followed by deposition of a dielectric layer (Al$_{2}$O$_{3}$ and parylene C), another rolled SLG as channel, and perovskite as photoactive component. The resulting gate-tunable PDs have response time$\sim$5ms, with an external responsivity$\sim$22kA/W at 488nm for 1V bias. The external responsivity is two orders of magnitude higher and the response time one order of magnitude faster than state-of-the-art wearable fibre based PDs. Under bending at 4mm radius, up to$\sim$80\% photocurrent is maintained. Washability tests show$\sim$72\% of initial photocurrent after 30 cycles, promising for wearable applications.

physics.app-ph↗

arXiv2023

Monolayer WS$_2$ electro- and photo-luminescence enhancement by TFSI treatment

Layered material heterostructures (LMHs) can be used to fabricate electroluminescent devices operating in the visible spectral region. A major advantage of LMH-light emitting diodes (LEDs) is that electroluminescence (EL) emission can be tuned across that of different exciton complexes (e.g. biexcitons, trions, quintons) by controlling the charge density. However, these devices have an EL quantum efficiency as low as$\sim$10$^{-4}$\%. Here, we show that the superacid bis-(triuoromethane)sulfonimide (TFSI) treatment of monolayer WS$_2$-LEDs boosts EL quantum efficiency by over one order of magnitude at room temperature. Non-treated devices emit light mainly from negatively charged excitons, while the emission in treated ones predominantly involves radiative recombination of neutral excitons. This paves the way to tunable and efficient LMH-LEDs

cond-mat.mtrl-sci↗

arXiv2019

Waveguide-integrated, plasmonic enhanced graphene photodetectors

We present a micrometer scale, on-chip integrated, plasmonic enhanced graphene photodetector (GPD) for telecom wavelengths operating at zero dark current. The GPD is designed and optimized to directly generate a photovoltage and has an external responsivity~12.2V/W with a 3dB bandwidth~42GHz. We utilize Au split-gates with a$\sim$100nm gap to electrostatically create a p-n-junction and simultaneously guide a surface plasmon polariton gap-mode. This increases light-graphene interaction and optical absorption and results in an increased electronic temperature and steeper temperature gradient across the GPD channel. This paves the way to compact, on-chip integrated, power-efficient graphene based photodetectors for receivers in tele and datacom modules

physics.app-ph↗

arXiv2019

High-mobility, wet-transferred graphene grown by chemical vapor deposition

We report high room-temperature mobility in single layer graphene grown by Chemical Vapor Deposition (CVD) after wet transfer on SiO$_2$ and hexagonal boron nitride (hBN) encapsulation. By removing contaminations trapped at the interfaces between single-crystal graphene and hBN, we achieve mobilities up to$\sim70000cm^2 V^{-1} s^{-1}$ at room temperature and$\sim120000cm^2 V^{-1} s^{-1}$ at 9K. These are over twice those of previous wet transferred graphene and comparable to samples prepared by dry transfer. We also investigate the combined approach of thermal annealing and encapsulation in polycrystalline graphene, achieving room temperature mobilities$\sim30000 cm^2 V^{-1} s^{-1}$. These results show that, with appropriate encapsulation and cleaning, room temperature mobilities well above $10000cm^2 V^{-1} s^{-1}$ can be obtained in samples grown by CVD and transferred using a conventional, easily scalable PMMA-based wet approach.

cond-mat.mes-hall↗

arXiv2018

Tetrahedral amorphous carbon resistive memories with graphene-based electrodes

Resistive-switching memories are alternative to Si-based ones, which face scaling and high power consumption issues. Tetrahedral amorphous carbon (ta-C) shows reversible, non-volatile resistive switching. Here we report polarity independent ta-C resistive memory devices with graphene-based electrodes. Our devices show ON/OFF resistance ratios$\sim$4x$10^5$, ten times higher than with metal electrodes, with no increase in switching power, and low power density$\sim$14$μ$W/$μ$m$^2$. We attribute this to a suppressed tunneling current due to the low density of states of graphene near the Dirac point, consistent with the current-voltage characteristics derived from a quantum point contact model. Our devices also have multiple resistive states. This allows storing more than one bit per cell. This can be exploited in a range of signal processing/computing-type operations, such as implementing logic, providing synaptic and neuron-like mimics, and performing analogue signal processing in non-von-Neumann architectures

physics.app-ph↗

arXiv2017

Out-of-plane heat transfer in van der Waals stacks: electron-hyperbolic phonon coupling

Van der Waals heterostructures have emerged as promising building blocks that offer access to new physics, novel device functionalities, and superior electrical and optoelectronic properties. Applications such as thermal management, photodetection, light emission, data communication, high-speed electronics and light harvesting require a thorough understanding of (nanoscale) heat flow. Here, using time-resolved photocurrent measurements we identify an efficient out-of-plane energy transfer channel, where charge carriers in graphene couple to hyperbolic phonon polaritons in the encapsulating layered material. This hyperbolic cooling is particularly efficient, giving picosecond cooling times, for hexagonal BN, where the high-momentum hyperbolic phonon polaritons enable efficient near-field energy transfer. We study this heat transfer mechanism through distinct control knobs to vary carrier density and lattice temperature, and find excellent agreement with theory without any adjustable parameters. These insights may lead to the ability to control heat flow in van der Waals heterostructures.

cond-mat.mes-hall↗

arXiv2017

Broadband, electrically tuneable, third harmonic generation in graphene

Optical harmonic generation occurs when high intensity light ($>10^{10}$W/m$^{2}$) interacts with a nonlinear material. Electrical control of the nonlinear optical response enables applications such as gate-tunable switches and frequency converters. Graphene displays exceptionally strong-light matter interaction and electrically and broadband tunable third order nonlinear susceptibility. Here we show that the third harmonic generation efficiency in graphene can be tuned by over two orders of magnitude by controlling the Fermi energy and the incident photon energy. This is due to logarithmic resonances in the imaginary part of the nonlinear conductivity arising from multi-photon transitions. Thanks to the linear dispersion of the massless Dirac fermions, ultrabroadband electrical tunability can be achieved, paving the way to electrically-tuneable broadband frequency converters for applications in optical communications and signal processing.

cond-mat.mes-hall↗

arXiv2017

Vertically-Illuminated, Resonant-Cavity-Enhanced, Graphene-Silicon Schottky Photodetectors

We report vertically-illuminated, resonant cavity enhanced, graphene-Si Schottky photodetectors (PDs) operating at 1550nm. These exploit internal photoemission at the graphene-Si interface. To obtain spectral selectivity and enhance responsivity, the PDs are integrated with an optical cavity, resulting in multiple reflections at resonance, and enhanced absorption in graphene. Our devices have wavelength-dependent photoresponse with external (internal) responsivity~20mA/W (0.25A/W). The spectral-selectivity may be further tuned by varying the cavity resonant wavelength. Our devices pave the way for developing high responsivity hybrid graphene-Si free-space illuminated PDs for free-space optical communications, coherence optical tomography and light-radars

physics.app-ph↗

arXiv2017

Graphene Phase Modulator

We demonstrate a 10Gb/s Graphene Phase Modulator (GPM) integrated in a Mach-Zehnder interferometer configuration. This is a compact device, with a phase-shifter length of only 300$μ$m, and 35dB extinction ratio. The GPM has modulation efficiency of 0.28Vcm, one order of magnitude higher compared to state-of-the-art depletion p-n junction Si phase modulators. Our GPM operates with 2V peak-to-peak driving voltage in a push-pull configuration, and it has been tested in a binary transmission of a non-return-to-zero data stream over 50km single mode fibre. This device is the key building block for graphene-based integrated photonics, enabling compact and energy efficient hybrid Si-graphene modulators for telecom, datacom and other applications

cond-mat.mes-hall↗

arXiv2016

Microfluidization of graphite and formulation of graphene-based conductive inks

We report the exfoliation of graphite in aqueous solutions under high shear rate [$\sim10^8s^{-1}$] turbulent flow conditions, with a 100\% exfoliation yield. The material is stabilized without centrifugation at concentrations up to 100 g/L using carboxymethylcellulose sodium salt to formulate conductive printable inks. The sheet resistance of blade coated films is below$\sim2Ω/\square$. This is a simple and scalable production route for graphene-based conductive inks for large area printing in flexible electronics.

cond-mat.mtrl-sci↗

arXiv2015

High Responsivity, Large-Area Graphene/MoS2 Flexible Photodetectors

We present flexible photodetectors (PDs) for visible wavelengths fabricated by stacking centimetre-scale chemical vapour deposited (CVD) single layer graphene (SLG) and single layer CVD MoS2, both wet transferred onto a flexible polyethylene terephthalate substrate. The operation mechanism relies on injection of photoexcited electrons from MoS2 to the SLG channel. The external responsivity is 45.5A/W and the internal 570A/W at 642nm. This is at least two orders of magnitude higher than bulk-semiconductor flexible membranes and other flexible PDs based on graphene and layered materials. The photoconductive gain is up to 4x10^5. The photocurrent is in the 0.1-100 uA range. The devices are semi-transparent, with just 8% absorption at 642nm and work stably upon bending to a curvature of 6cm. These capabilities and the low voltage operation (<1V) make them attractive for wearable applications.

cond-mat.mtrl-sci↗