SearcharxivSearch

arXiv subjects

I. Gvozdovskyy

Publications and source records attributed to I. Gvozdovskyy.

5 recordsLinked to original sources

Bragg diffraction of higher orders on oblique helicoidal liquid crystal structures

For the oblique helicoidal structure of the chiral twist-bend nematic-forming mixture of CB7CB/CB6OCB/5CB doped by light-sensitive chiral compound based on azo-fragment, two consequent states of Bragg reflection of the light in the visible spectral range from 400 to 750 nm were experimentally observed in the course of decreasing the applied electric field. These states were assigned to different orders of Bragg's diffraction. While the second and third orders of Bragg's diffraction can be easily observed in conditions of standard electrooptic cell, the first order could be revealed only at very high electric field near the "red" edge of the visible spectral range. For the second and third orders of diffraction there is a narrow range of electric field where both diffraction orders are observed (so-called hybrid state), with transmittance spectra of the $Ch_{OH}$ structure showing two peaks at the short-wavelength and the long-wavelength edges of the visible spectral range. Model calculations of Bragg's reflection of light were carried out using literature values of elasticity constants and dielectric permittivity, and the calculated plots of the selective reflection maximum vs. voltage were in good agreement with experimental data.

cond-mat.soft

Light-controllable hybrid aligning layer based on LIPSS on sapphire surface and PVCN-F film

The creation of aligning layers for the uniform orientation of liquid crystals is significant for both research and the application of liquid crystals. For all applications, the creation of aligning layers possessing controllable characteristics such as azimuthal and polar anchoring energies, easy-axis of director alignment and pre-tilt angle, in the same way as it is achieved by using photoaligning layers processed by light, is very important. Here, aligning properties of hybrid aligning layers created on the basis of sapphire surfaces additionally coated by photoaligning layer of PVCN-F are studied. These hybrid layers possess the properties of the nano-structured sapphire layer and the photosensitive PVCN-F layer, and complement each other. The irradiation time dependence of the azimuthal anchoring energy of the hybrid layers is studied. By using certain experimental conditions during irradiation of hybrid layers, e.g., polarisation of light and irradiation time, a minimum value of the azimuthal anchoring energy, close to zero, was obtained. Atomic force microscope studies of the irradiated hybrid layers were also carried out. It was found that the behavior of the contact angle of nematic droplets placed on treated sapphire surfaces are in good agreement with properties of hybrid aligning layers and parameters of structuring surface obtained from AFM images.

cond-mat.soft

Light-controllable chiral dopant based on azo-fragment: synthesis and characterization

We present the newly synthesized chiral dopant 2-[(2-isopropyl-5-methylcyclohexyl)oxy]-2-oxoethyl 4-{(E)-[4-(decyloxy)phenyl]diazenyl}benzoate (ChD-3501), consisting of azo- and aliphatic fragments together with a chiral center based on l-menthol as a reversible light-controllable chiral dopant. To assess the effects of UV/VIS irradiation and temperature in the isotropic and liquid crystalline (LC) states, we studied the spectral kinetics of ethanol solution of ChD-3501, as well as induction of the cholesteric helix when it was dissolved in nematic LC (E7) as a chiral dopant. The concentration dependence of the helical pitch of the induced cholesterics was studied by means on Grandjean-Cano method, and the helical twisting power of ChD-3501 in the nematic host E7 was determined. The reversible trans-cis isomerization of chiral dopandt ChD-3501 in E7 under UV/VIS irradiation was studied, and it has been found that the storage of the cis-isomer at certain constant temperature also leads to the reversible isomerisation, which presents a certain interest for applications.

cond-mat.soft

Azimuthal and polar anchoring energies of aligning layers structured by nonlinear laser lithography

In spite of the fact that there are different techniques in the creation of the high-quality liquid crystals (LCs) alignment by means of various surfaces, the azimuthal and polar anchoring energies as well as the pre-tilt angle are important parameters to all of them. Here, the modified by a certain manner aligning layers, previously formed by nonlinear laser lithography (NLL), having high-quality nano-periodic grooves on Ti surfaces, recently proposed for LC alignment was studied. The change of the scanning speed of NLL in the process of nano-structured Ti surfaces and their further modification by means of ITO-coating, and deposition of polyimide film has enabled different aligning layers, whose main characteristics, namely azimuthal and polar anchoring energies, were measured. For the modified aligning layers, the dependencies of the twist and pre-tilt angles for LC cells filled by nematic E7 (Δε > 0) and MLC-6609 (Δε < 0) were obtained. Also the contact angle for droplets of isotropic liquid (glycerol), and nematic LCs was measured for the various values of the scanning speed during the laser processing.

physics.app-ph

The alignment of nematic liquid crystal by the Ti layer processed by nonlinear laser lithography

It is well known that the alignment of liquid crystals can be realized by rubbing or photoalignment technologies. Recently nonlinear laser lithography was introduced as a fast, relatively low-cost method for large area nano-grating fabrication based on laser-induced periodic surface structuring. In this letter for the first time the usage of the nonlinear laser lithography as a perspective method of the alignment of nematics was presented. By nonlinear laser lithography, microgrooves with about 1 μm period were formed on Ti layer. The microstructured Ti layer was coated with oxidianiline-polyimide film with annealing of the polymer followed without any further processing. Aligning properties of microstructured Ti layers were examined with combined twist LC cell. The dependencies of the twist angle of LC cells and azimuthal anchoring energy of layers on scanning speed and power of laser beam during processing of the Ti layer were the focus of our studies as well. The maximum azimuthal anchoring energy, obtained for pure microstructured Ti layer, is comparable with photoalignment technology. It was found that the deposition of polyimide film on microstructured Ti layer leads to the gain effect of the azimuthal anchoring energy. Also, AFM study of aligning surfaces was carried out.

cond-mat.soft