Searcharxiv⌕ Search

arXiv subjects

I. M. Pinto

Publications and source records attributed to I. M. Pinto.

16 recordsLinked to original sources
arXiv2026

Experimental Realization of Optimized Ternary Mirror Coatings

We report on the first experimental realization of multi-material dielectric mirror coatings designed through a multi-objective optimization algorithm to simultaneously minimize thermal noise and optical losses. We validate this design strategy by fabricating and characterizing two distinct ternary systems: a SiNx -based proof-of-concept and a Ti:GeO2 -based system targeting lower optical losses. The performance of the SiN x coating shows remarkable agreement with predictions, demonstrating a noise amplitude spectral density reduction of 0.82 with respect to current reference coatings, and validating our design-to-fabrication pipeline. The Ti:GeO2 -based system achieves the crucial goal of sub-ppm absorption; its measured thermal noise, however, is higher than the theoretically predicted level of 0.71, extrapolated from single-layer material characterization. A dedicated tolerance analysis confirms that this discrepancy is not attributable to random thickness errors, emphasizing that further studies of the manufacturing process are needed to fully exploit this combination of materials. This work establishes a robust methodology for producing complex, high-performance optical coatings tailored for precision experiments.

physics.optics↗
arXiv2025

Development of ion-beam sputtered silicon nitride thin films for low-noise mirror coatings of gravitational-wave detectors

Brownian thermal noise of thin-film coatings is a fundamental limit for high-precision experiments based on optical resonators such as gravitational-wave interferometers. Here we present the results of a research activity aiming to develop lower-noise ion-beam sputtered silicon nitride thin films compliant with the very stringent requirements on optical loss of gravitational-wave interferometers. In order to test the hypothesis of a correlation between the synthesis conditions of the films and their elemental composition and optical and mechanical properties, we varied the voltage, current intensity and composition of the sputtering ion beam, and we performed a broad campaign of characterizations. While the refractive index was found to monotonically depend on the beam voltage and linearly vary with the N/Si ratio, the optical absorption appeared to be strongly sensitive to other factors, as yet unidentified. However, by systematically varying the deposition parameters, an optimal working point was found. Thus we show that the loss angle and extinction coefficient of our thin films can be as low as $(1.0 \pm 0.1) \times 10^{-4}$ rad at $\sim$2.8 kHz and $(6.4 \pm 0.2) \times 10^{-6}$ at 1064 nm, respectively, after thermal treatment at 900 $^{\circ}$C. To the best of our knowledge, such loss angle value is the lowest ever measured on this class of thin films. We then used our silicon nitride thin films to design and produce a multi-material mirror coating showing a thermal noise amplitude of $(10.3 \pm 0.2) \times 10^{-18}$ m Hz$^{-1/2}$ at 100 Hz, which is 25\% lower than in current mirror coatings of the Advanced LIGO and Advanced Virgo interferometers, and an optical absorption as low as $(1.6 \pm 0.5)$ parts per million at 1064 nm.

physics.ins-det↗
arXiv2021

Ternary Quarter Wavelength Coatings for Gravitational Wave Detector Mirrors: Design Optimization via Exhaustive Search

Multimaterial optical coatings are a promising viable option to meet the challenging requirements (in terms of transmittance, absorbance and thermal noise) of next generation gravitational wave detector mirrors. In this paper we focus on ternary coatings consisting of quarter-wavelength thick layers, where a third material (H') is added to the two presently in use, namely Silica (L) and Titania-doped Tantala (H), featuring higher dielectric contrast (against Silica), and lower thermal noise (compared to Titania-doped Tantala), but higher optical losses. We seek the optimal material sequences, featuring minimal thermal (Brownian) noise under prescribed transmittance and absorbance constraints, by exhaustive simulation over all possible configurations, for different values (in a meaningful range) of the optical density and extinction coefficient of the third material. In all cases studied, the optimal designs consist of a stack of (H'|L) doublets topped by a stack of (H|L) doublets, confirming previous heuristic assumptions, and the achievable coating noise power spectral density reduction factor is \sim 0.5. The robustness of the found optimal designs against layer thickness deposition errors and uncertainties and/or fluctuations in the optical losses of the third material is also investigated. Possible margins for further thermal noise reduction by layer thickness optimization, and strategies to implement it, are discussed.

physics.optics↗
arXiv2019

On the performance limits of coatings for gravitational wave detectors made of alternating layers of two materials

The coating design for mirrors used in interferometric detectors of gravitational waves currently consists of stacks of two alternating dielectric materials with different refractive indexes. In order to explore the performance limits of such coatings, we have formulated and solved the design problem as a multiobjective optimization problem consisting of the minimization of both coating transmittance and thermal noise. An algorithm of global optimization (Borg MOEA) has been used without any a priori assumption on the number and thicknesses of the layers in the coating. The algorithm yields to a Pareto tradeoff boundary exhibiting a continuous, decreasing and non convex (bump-like) profile, bounded from below by an exponential curve which can be written in explicit closed form in the transmittance-noise plane. The lower bound curve has the same expression of the relation between transmittance and noise for the quarter wavelength design where the noise coefficient of the high refractive index material assumes a smaller equivalent value. An application of this result allowing to reduce the computational burden of the search procedure is reported and discussed.

astro-ph.IM↗
arXiv2014

Membrane Heating in Living Tissues Exposed to Nonthermal Pulsed EM Fields

A bio tissue model consisting of multilayer spherical cells including four nested radial domains (nucleus, nuclear membrane, cytoplasm and plasma membrane) is worked out to derive the cell heating dynamics in presence of membrane capacitance dispersion under pulsed electromagnetic exposure. Two possible cases of frequency-dependent membrana models are discussed: plasma and nuclear membranes are dispersive, only the nuclear memebrane is dispersive . In both models an high localized heating of the membranes occurs, without significant temperature rise in the cytoplasm and nucleoplasm.

physics.bio-ph↗
arXiv2004

Rejection Properties of Stochastic-Resonance-Based Detectors of Weak Harmonic Signals

In (V. Galdi et al., Phys. Rev. E57, 6470, 1998) a thorough characterization in terms of receiver operating characteristics (ROCs) of stochastic-resonance (SR) detectors of weak harmonic signals of known frequency in additive gaussian noise was given. It was shown that strobed sign-counting based strategies can be used to achieve a nice trade-off between performance and cost, by comparison with non-coherent correlators. Here we discuss the more realistic case where besides the sought signal (whose frequency is assumed known) further unwanted spectrally nearby signals with comparable amplitude are present. Rejection properties are discussed in terms of suitably defined false-alarm and false-dismissal probabilities for various values of interfering signal(s) strength and spectral separation.

gr-qc↗
arXiv2004

Correlator Bank Detection of GW chirps. False-Alarm Probability, Template Density and Thresholds: Behind and Beyond the Minimal-Match Issue

The general problem of computing the false-alarm rate vs. detection-threshold relationship for a bank of correlators is addressed, in the context of maximum-likelihood detection of gravitational waves, with specific reference to chirps from coalescing binary systems. Accurate (lower-bound) approximants for the cumulative distribution of the whole-bank supremum are deduced from a class of Bonferroni-type inequalities. The asymptotic properties of the cumulative distribution are obtained, in the limit where the number of correlators goes to infinity. The validity of numerical simulations made on small-size banks is extended to banks of any size, via a gaussian-correlation inequality. The result is used to estimate the optimum template density, yielding the best tradeoff between computational cost and detection efficiency, in terms of undetected potentially observable sources at a prescribed false-alarm level, for the simplest case of Newtonian chirps.

gr-qc↗
arXiv2004

How Many Templates for GW Chirp Detection? The Minimal-Match Issue Revisited

In a recent paper dealing with maximum likelihood detection of gravitational wave chirps from coalescing binaries with unknown parameters we introduced an accurate representation of the no-signal cumulative distribution of the supremum of the whole correlator bank. This result can be used to derive a refined estimate of the number of templates yielding the best tradeoff between detector's performance (in terms of lost signals among those potentially detectable) and computational burden.

gr-qc↗
arXiv2002

A New Paradigm in Chaotic Ray Scattering

We introduce a new paradigm of 2D (electromagnetic) ray-chaos, featuring both guided and scattered rays in a dielectric layer with exponentially tapered refraction index backed by an undulated conductive surface, and illustrate its relevant features. Numerical simulations of the corresponding full-wave solution indicate that the system complies with Berry's conjecture in the asymptotic short wavelength limit.

nlin.CD↗
arXiv2001

Tanaka-Tagoshi Parametrization of post-1PN Spin-Free Gravitational Wave Chirps: Equispaced and Cardinal Interpolated Lattices For First Generation Interferometric Antennas

The spin-free binary-inspiral parameter-space introduced by Tanaka and Tagoshi to construct a uniformly-spaced lattice of templates at (and possibly beyond) $2.5PN$ order is shown to work for all first generation interferometric gravitational wave antennas. This allows to extend the minimum-redundant cardinal interpolation techniques of the correlator bank developed by the Authors to the highest available order PN templates. The total number of 2PN templates to be computed for a minimal match $Γ=0.97$ is reduced by a factor 4, as in the 1PN case.

gr-qc↗
arXiv2000

Gravitational Wave Chirp Search: Economization of PN Matched Filter Bank via Cardinal Interpolation

The final inspiral phase in the evolution of a compact binary consisting of black holes and/or neutron stars is among the most probable events that a network of ground-based interferometric gravitational wave detectors is likely to observe. Gravitational radiation emitted during this phase will have to be dug out of noise by matched-filtering (correlating) the detector output with a bank of several $10^5$ templates, making the computational resources required quite demanding, though not formidable. We propose an interpolation method for evaluating the correlation between template waveforms and the detector output and show that the method is effective in substantially reducing the number of templates required. Indeed, the number of templates needed could be a factor $\sim 4$ smaller than required by the usual approach, when the minimal overlap between the template bank and an arbitrary signal (the so-called {\it minimal match}) is 0.97. The method is amenable to easy implementation, and the various detector projects might benefit by adopting it to reduce the computational costs of inspiraling neutron star and black hole binary search.

gr-qc↗
arXiv2000

Fast and Accurate Computation Tools for Gravitational Waveforms from Binary Sistems with any Orbital Eccentricity

The relevance of orbital eccentricity in the detection of gravitational radiation from (steady state) binary stars is emphasized. Computationnally effective fast and accurate)tools for constructing gravitational wave templates from binary stars with any orbital eccentricity are introduced, including tight estimation criteria of the pertinent truncation and approximation errors.

gr-qc↗
arXiv2000

A Nearly Minimum Redundant Correlator Interpolation Formula for Gravitational Wave Chirp Detection

An absolute lower bound on the number of templates needed to keep the fitting factor above a prescribed minimal value $Γ$ in correlator bank detection of (newtonian) gravitational wave chirps from unknown inspiraling compact binary sources is derived, resorting to the theory of quasi-bandlimited functions in the $L^\infty$ norm. An explicit nearly-minimum redundant cardinal-interpolation formula for the (reduced, noncoherent) correlator is introduced. Its computational burden and statistical properties are compared to those of the plain lattice of (reduced, noncoherent) correlators, for the same $Γ$. Extension to post-newtonian models is outlined.

gr-qc↗