arXiv subjects

I. V. Shvets

Publications and source records attributed to I. V. Shvets.

11 recordsLinked to original sources

arXiv2012

Statistical distribution of the electric field driven switching of the Verwey state in Fe3O4

The insulating state of magnetite (Fe$_{3}$O$_{4}$) can be disrupted by a sufficiently large dc electric field. Pulsed measurements are used to examine the kinetics of this transition. Histograms of the switching voltage show a transition width that broadens as temperature is decreased, consistent with trends seen in other systems involving "unpinning" in the presence of disorder. The switching distributions are also modified by an external magnetic field on a scale comparable to that required to reorient the magnetization.

cond-mat.str-el↗

arXiv2010

Contact effects on transport in magnetite, an archetypal correlated transition metal oxide

Multiterminal measurements have typically been employed to examine electronic properties of strongly correlated electronic materials such as transition metal oxides without the influence of contact effects. In contrast, in this work we investigate the interface properties of Fe$_3$O$_4$ with different metals, with the contact effects providing a window on the physics at work in the correlated oxide. Contact resistances are determined by means of four-terminal electrical measurements as a function of source voltage and temperature. Contact resistances vary systematically with the work function of the electrode metal, $ϕ(M)$, $M=$Cu, Au and Pt, with higher work function yielding lower contact resistance. This trend and the observation that contact resistances are directly proportional to the Fe$_3$O$_4$ resistivity are consistent with modeling the oxide as an effective $p$-type semiconductor with hopping transport. The jumps in contact resistance values at the bias-driven insulator-metal transition have a similar trend with $ϕ$($M$), consistent with the transition mechanism of charge gap closure by electric field.

cond-mat.str-el↗

arXiv2010

Ferrimagnetism of the magnetoelectric compound Cu$_2$OSeO$_3$ probed by $^{77}$Se NMR

We present a thorough $^{77}$Se NMR study of a single crystal of the magnetoelectric compound Cu$_2$OSeO$_3$. The temperature dependence of the local electronic moments extracted from the NMR data is fully consistent with a magnetic phase transition from the high-T paramagnetic phase to a low-T ferrimagnetic state with 3/4 of the Cu$^{2+}$ ions aligned parallel and 1/4 aligned antiparallel to the applied field of 14.09 T. The transition to this 3up-1down magnetic state is not accompanied by any splitting of the NMR lines or any abrupt modification in their broadening, hence there is no observable reduction of the crystalline symmetry from its high-T cubic \textit{P}2$_1$3 space group. These results are in agreement with high resolution x-ray diffraction and magnetization data on powder samples reported previously by Bos {\it et al.} [Phys. Rev. B, {\bf 78}, 094416 (2008)]. We also develop a mean field theory description of the problem based on a microscopic spin Hamiltonian with one antiferromagnetic ($J_\text{afm}\simeq 68$ K) and one ferromagnetic ($J_\text{fm}\simeq -50$ K) nearest-neighbor exchange interaction.

cond-mat.str-el↗

arXiv2009

Interplay of bulk and interface effects in the electric-field driven transition in magnetite

Contact effects in devices incorporating strongly-correlated electronic materials are comparatively unexplored. We have investigated the electrically-driven phase transition in magnetite (100) thin films by four-terminal methods. In the lateral configuration, the channel length is less than 2 $μ$m, and voltage-probe wires $\sim$100 nm in width are directly patterned within the channel. Multilead measurements quantitatively separate the contributions of each electrode interface and the magnetite channel. We demonstrate that on the onset of the transition contact resistances at both source and drain electrodes and the resistance of magnetite channel decrease abruptly. Temperature dependent electrical measurements below the Verwey temperature indicate thermally activated transport over the charge gap. The behavior of the magnetite system at a transition point is consistent with a theoretically predicted transition mechanism of charge gap closure by electric field.

cond-mat.str-el↗

arXiv2009

The origin of hysteresis in resistive switching in magnetite is Joule heating

In many transition metal oxides the electrical resistance is observed to undergo dramatic changes induced by large biases. In magnetite, Fe$_3$O$_4$, below the Verwey temperature, an electric field driven transition to a state of lower resistance was recently found, with hysteretic current-voltage response. We report the results of pulsed electrical conduction measurements in epitaxial magnetite thin films. We show that while the high- to low-resistance transition is driven by electric field, the hysteresis observed in $I-V$ curves results from Joule heating in the low resistance state. The shape of the hysteresis loop depends on pulse parameters, and reduces to a hysteresis-free "jump" of the current provided thermal relaxation is rapid compared to the time between voltage pulses. A simple relaxation time thermal model is proposed that captures the essentials of the hysteresis mechanism.

cond-mat.str-el↗

arXiv2008

Nanogaps with very large aspect ratios for electrical measurements

For nanoscale electrical characterization and device fabrication it is often desirable to fabricate planar metal electrodes separated by large aspect ratio gaps with interelectrode distances well below 100 nm. We demonstrate a self-aligned process to accomplish this goal using a thin Cr film as a sacrificial etch layer. The resulting gaps can be as small as 10 nm and have aspect ratios exceeding 1000, with excellent interelectrode isolation. Such Ti/Au electrodes are demonstrated on Si substrates and are used to examine a voltage-driven transition in magnetite nanostructures. This shows the utility of this fabrication approach even with relatively reactive substrates.

cond-mat.mtrl-sci↗

arXiv2005

Oxide nanotemplates for self-assembling "solid" building blocks

It is widely accepted that self-assembling building blocks is one of the promising ways for engineering new materials. Recent years reveal substantial progress in fabricating colloidal particles, polymer blocks and supramolecular aggregates of organic molecules. Despite of substantial progress in molecular self-assembly there is still a lack of simple blocks made of "solid matter" (e.g. metals, oxides etc.) with well-defined crystal structure and spatial order. Here we demonstrate that ordered arrays of metal nanoclusters can be fabricated by self-assembly on a wide range of oxide templates. These nano-templates are produced either by depositing an alien oxide film or by oxidizing a metal/metal oxide substrate.

cond-mat.mtrl-sci↗

arXiv2004

Self-assembly of iron nanoclusters on the Fe3O4(111) superstructured surface

We report on the self-organized growth of a regular array of Fe nanoclusters on a nanopatterned magnetite surface. Under oxidizing preparation conditions the (111) surface of magnetite exhibits a regular superstructure with three-fold symmetry and a 42 A periodicity. This superstructure represents an oxygen terminated (111) surface, which is reconstructed to form a periodically strained surface. This strain patterned surface has been used as a template for the growth of an ultrathin metal film. A Fe film of 0.5 A thickness was deposited on the substrate at room temperature. Fe nanoclusters are formed on top of the surface superstructure creating a regular array with the period of the superstructure. We also demonstrate that at least the initial stage of Fe growth occurs in two-dimensional mode. In the areas of the surface where the strain pattern is not formed, random nucleation of Fe was observed.

cond-mat.mtrl-sci↗

arXiv2004

Atomically Resolved Spin-Dependent Tunnelling on the Oxygen-Terminated Fe3O4 (111)

We employ spin-polarized (SP) STM to study the spin-dependent tunneling between a magnetite (111) sample and an antiferromagnetic tip through a vacuum barrier at room temperature. Atomic scale STM images show significant magnetic contrast corresponding to variations in the local surface states induced by oxygen vacancies. The estimated variations in tunneling magnetoresistance (TMR) of 250% suggest that the spin-transport properties are significantly altered locally by the presence of surface defects.

cond-mat.mtrl-sci↗

arXiv2004

Mechanism of epitaxial self-assembly of Fe nanowedge islands on Mo(110)

The deposition of ultrathin Fe films on the Mo(110) surface at elevated temperatures results in the formation of distinctive nanowedge islands supported on a pseudomorphic Fe layer. We propose a model explaining the growth mode of these wedge-shaped Fe islands. The model is based on the strain produced in the substrate around each island, by the lattice mismatch between the film and substrate. Fe adatoms migrate towards the islands due to the influence of this strain, which is related to the thickness and size of each island. The adatoms subsequently enter the islands not only through their thin ends where the island can be only two monolayers thick but on the contrary, through a vertical climb along the sides of the thicker end, which can be tens of layers thick. This mode of mass transport is again driven by strain, corresponding to the energy reduction through movement towards the location where the interatomic spacing in the island corresponds to the bulk value. A key element of the model is that misfit dislocations are formed in the lower layers of the nanowedge, which act as migration channels for the vertical climb.

cond-mat.other↗

arXiv2004

Room temperature study of a strain-induced electronic superstructure on a magnetite (111) surface

A magnetite (Fe3O4) single crystal (111) surface has been studied at various oxygen-iron surface stoichiometries. The stoichiometry was modified by controlling the in-situ sample anneal conditions. We have found the conditions that lead to the formation of an oxygen-rich surface that forms a quasi-hexagonal superstructure with a 42A periodicity. The superstructure is highly regular and was observed by both LEED and STM. The superstructure consists of three regions, two of which have identical atomic scale structures with a periodicity of 2.8A, and a third having a periodicity that is about 10% larger (3.1A). The subtle difference in the atomic periodicities between the three areas results from the modulation of intrinsic strain developed along the surface. The superstructure results from electronic effects rather than being a mosaic of different iron oxide terminations. The onset of the superstructure is sensitive to the surface stoichiometry. From our results we could estimate the critical density of defects leading to the disappearance of the superstructure. We have modelled the experimental results and calculated the electron density using a DFT algorithm. The model clearly shows the development of strain along the surface.

cond-mat.soft↗