arXiv subjects

Iacopo Mochi

Publications and source records attributed to Iacopo Mochi.

4 recordsLinked to original sources

arXiv2026

Holographic EUV Lithography at 40 nm Resolution

Extreme ultraviolet (EUV) lithography is the cornerstone of the fabrication of advanced integrated circuits at the 7-nm node and beyond, but its reliance on multi-element reflective projection optics makes it inaccessible for small-scale research and prototyping. EUV interference lithography (EUV-IL) provides a lensless alternative but is intrinsically restricted to periodic structures. Here we demonstrate EUV holographic lithography (EUV-HL) as a lensless route to arbitrary, non-periodic, curvilinear patterning at the EUV wavelength of 13.5 nm. We introduce an inverse-design framework for computer-generated holograms that captures the dominant physical effects of EUV mask diffraction within a shift-invariant convolution model that is tractable for full mask layouts. Using this framework, we design and fabricate transmissive holographic masks by direct-write electron-beam lithography in hydrogen silsesquioxane, expose them with synchrotron-generated EUV radiation, and print target layouts with critical dimensions down to 40 nm, nearly an order of magnitude finer than the previous state of the art in EUV-HL. The demonstrated combination of sub-50 nm resolution, curvilinear design freedom, and a lensless optical setup establishes EUV-HL as a uniquely flexible tool for nanostructure prototyping at EUV wavelengths, and provides a natural pathway to non-periodic pattern prototyping at beyond-EUV (BEUV) wavelengths, which is currently inaccessible to interference-based methods.

physics.optics↗

arXiv2024

Extreme ultraviolet lithography reaches 5 nm resolution

Extreme ultraviolet (EUV) lithography is the leading lithography technique in CMOS mass production, moving towards the sub-10 nm half-pitch (HP) regime with the ongoing development of the next generation high-numerical aperture (high-NA) EUV scanners. Hitherto, EUV interference lithography (EUV-IL) utilizing transmission gratings has been a powerful patterning tool for the early development of EUV resists and related processes, playing a key role in exploring and pushing the boundaries of photon-based lithography. However, achieving pattering with HPs well below 10 nm using this method presents significant challenges. In response, our study introduces a novel EUV-IL setup that employs mirror-based technology and circumvents the limitations of diffraction efficiency towards the diffraction limit that is inherent in conventional grating-based approaches. We present line/space patterning of HSQ resist down to HP 5 nm using the standard EUV wavelength 13.5 nm, and the compatibility of the tool with shorter wavelengths beyond EUV. The mirror-based interference lithography tool paves the way towards the ultimate photon-based resolution at EUV wavelengths and beyond. This advancement is vital for scientific and industrial research, addressing the increasingly challenging needs of nanoscience and technology and future technology nodes of CMOS manufacturing in the few-nanometer HP regime.

physics.optics↗

arXiv2023

Deep learning denoiser assisted roughness measurements extraction from thin resists with low Signal-to-Noise Ratio(SNR) SEM images: analysis with SMILE

The technological advance of High Numerical Aperture Extreme Ultraviolet Lithography (High NA EUVL) has opened the gates to extensive researches on thinner photoresists (below 30nm), necessary for the industrial implementation of High NA EUVL. Consequently, images from Scanning Electron Microscopy (SEM) suffer from reduced imaging contrast and low Signal-to-Noise Ratio (SNR), impacting the measurement of unbiased Line Edge Roughness (uLER) and Line Width Roughness (uLWR). Thus, the aim of this work is to enhance the SNR of SEM images by using a Deep Learning denoiser and enable robust roughness extraction of the thin resist. For this study, we acquired SEM images of Line-Space (L/S) patterns with a Chemically Amplified Resist (CAR) with different thicknesses (15nm, 20nm, 25nm, 30nm), underlayers (Spin-On-Glass-SOG, Organic Underlayer-OUL) and frames of averaging (4, 8, 16, 32, and 64 Fr). After denoising, a systematic analysis has been carried out on both noisy and denoised images using an open-source metrology software, SMILE 2.3.2, for investigating mean CD, SNR improvement factor, biased and unbiased LWR/LER Power Spectral Density (PSD). Denoised images with lower number of frames present unaltered Critical Dimensions (CDs), enhanced SNR (especially for low number of integration frames), and accurate measurements of uLER and uLWR, with the same accuracy as for noisy images with a consistent higher number of frames. Therefore, images with a small number of integration frames and with SNR < 2 can be successfully denoised, and advantageously used in improving metrology throughput while maintaining reliable roughness measurements for the thin resist.

cs.CV↗

arXiv2017

Lithographic performance of ZEP520A and mr-PosEBR resists exposed by electron beam and extreme ultraviolet lithography

Pattern transfer by deep anisotropic etch is a well-established technique for fabrication of nanoscale devices and structures. For this technique to be effective, the resist material plays a key role and must have high resolution, reasonable sensitivity and high etch selectivity against the conventional silicon substrate or underlayer film. In this work, the lithographic performance of two high etch resistance materials was evaluated: ZEP520A (Nippon Zeon Co.) and mr-PosEBR (micro resist technology GmbH). Both materials are positive tone, polymer-based and non-chemically amplified resists. Two exposure techniques were used: electron beam lithography (EBL) and extreme ultraviolet (EUV) lithography. These resists were originally designed for EBL patterning, where high quality patterning at sub-100 nm resolution was previously demonstrated. In the scope of this work, we also aim to validate their extendibility to EUV for high resolution and large area patterning. To this purpose, the same EBL process conditions were employed at EUV. The figures of merit, i.e. dose to clear, dose to size, and resolution, were extracted and these results are discussed systematically. It was found that both materials are very fast at EUV (dose to clear lower than 12 mJ/cm2) and are capable of resolving dense lines/space arrays with a resolution of 25 nm half-pitch. The quality of patterns was also very good and the sidewall roughness was below 6 nm. Interestingly, the general-purpose process used for EBL can be extended straightforwardly to EUV lithography with comparable high quality and yield. Our findings open new possibilities for lithographers who wish to devise novel fabrication schemes exploiting EUV for fabrication of nanostructures by deep etch pattern transfer.

physics.app-ph↗