arXiv subjects

Ievgen Brytavskyi

Publications and source records attributed to Ievgen Brytavskyi.

7 recordsLinked to original sources

arXiv2026

Towards Stirling cooler operable single-photon sources based on low-noise GaAs quantum dots

For photonic quantum technology applications, sources capable of emitting photons with indistinguishability close to unity are essential. Ideally, these sources should not require demanding cooling systems. Here, we present temperature-dependent two-photon-interference measurements on photons produced by the radiative decay of the negative trion in a low-noise GaAs quantum dot, which are in quantitative agreement with theoretical calculations accounting for carrier-phonon interactions and coupling to excited states. While at at the lowest explored temperatures the emission linewidth reaches values only 6(2) % above the Fourier limit and the indistinguishability I between subsequently emitted photons reaches 0.966(6), the latter drops to 0.05(4) at 55 K. We show that this loss can be explained with the coupling with energetically close excited trion states and suggest that the photon indistinguishability at elevated temperatures can be increased by employing Purcell enhancement of the emission rate or by increasing the energy separation of the excited states. Using cavity-enhanced emission, we experimentally verify the first route and demonstrate an improvement in photon indistinguishability from 0.314(25) to 0.80(3) at 32 K, which - to our knowledge - is the highest reported value at such temperature.

quant-ph↗

arXiv2026

Planar metal-semiconductor Yagi-Uda type antennas for tunable narrow-linewidth quantum dot emitters

Tunable photonic architectures that improve the extraction efficiency of light from embedded epitaxial quantum dots across a wide spectral range are key enablers for developing bright sources of single and indistinguishable photons. In this study, we experimentally demonstrate planar multilayer antenna structures consisting of epitaxially grown AlGaAs and InGaAs membranes containing quantum dots sandwiched between metallic Au (or Ag) reflector and director layers together with Al$_2$O$_3$ spacer layers. We show that the linewidths and fine-structure splitting of the neutral exciton emission remain comparable to those measured in the corresponding unprocessed samples, demonstrating that the fabrication process preserves the optical quality of the emitters. In addition to broadband operation, we demonstrate that the planar architecture is compatible with electrical tuning via integrated diode structures, and strain tuning using piezoelectric actuators. In spite of limitations related to optical losses in the ultrathin metallic layers, the demonstrated fabrication simplicity, scalability, and compatibility with tunable quantum emitters establish planar antennas as a promising platform for solid-state quantum photonic devices.

physics.optics↗

arXiv2026

Picosecond-resolved entanglement distribution over an urban free-space channel

Time-evolving entangled states describe quantum particles whose correlations evolve in time according to a well-defined dynamics. Such states can be generated in a variety of physical systems and are promising resources for several quantum technologies, ranging from quantum clock synchronization to quantum communication. However, their full potential is currently limited by the fact that the entanglement dynamics often occur on timescales comparable to the achievable synchronization precision, especially in experiments aimed at distributing entanglement through noisy urban channels. In this context, accurate timing is not merely a technical detail, but a fundamental requirement for faithfully observing and exploiting the underlying quantum correlations. Here, we demonstrate the faithful distribution of a fast-evolving entangled state over a 270 m free-space channel connecting two buildings in the center of Rome. The developed system incorporates a synchronization device capable of achieving sub-50 ps timing accuracy between the two ends of the link while simultaneously supporting channel stabilization. Our results demonstrate that time-evolving entanglement can be reliably transmitted through a noisy urban free-space channel, representing an important benchmark toward long-distance free-space quantum communication and the future implementation of time-correlated entangled states in demanding scenarios such as satellite-based quantum networks.

quant-ph↗

arXiv2026

Purcell enhanced and blinking free single photons from InAs/GaAs quantum dots in deterministically placed circular Bragg gratings

The development of efficient, deterministic, and tunable single-photon sources is a cornerstone for the realization of long-distance quantum communication, quantum repeaters, and photonic quantum computing technologies. In this study, we demonstrate a bright, charge-tunable single-photon source in the 900 nm wavelength range based on InAs quantum dots (QDs) embedded in a p-i-n doped GaAs membrane, which shows blinking free emission. We use a modified circular Bragg grating (CBG) as a micro-resonator. By adding fourfold symmetric bridges in a labyrinth-like geometry, we provide a conductive pathway to the central disk, thereby enabling electrical contact to the QD while maintaining high Purcell enhancement and photon extraction efficiency (PEE). For the negative trion (X-), we demonstrate a lifetime of $44.3 \pm 0.2$ ps - corresponding to a Purcell factor of $18.0 \pm 0.7$ and a PEE of $68.1% \pm 3.1$ %. Furthermore, the device is blinking-free with very low multi-photon contribution, evidenced by a second-order autocorrelation value $g(2)(0) < 0.017 \pm 0.015$. By applying a vertical diode bias, we demonstrate precise charge-state control, resolving distinct emission plateaus ranging from the single negatively charged trion ($X^-$) to triply negatively charged excitons ($X^{3-}$). These results showcase a robust architecture that simultaneously provides high efficiency, high repetition rates, and deterministic charge control, fulfilling key requirements for the next generation of quantum network hardware.

cond-mat.mes-hall↗

arXiv2026

A diode nanocavity for fast, efficient and tunable emission of highly entangled photon pairs and Fourier-transform-limited single photons

Deterministic sources of entangled photon pairs and indistinguishable photons are expected to play a key role in photonic quantum technologies. Semiconductor quantum dots are promising candidates due to their on-demand emission and compatibility with nanophotonic structures. However, current implementations face trade-offs between extraction efficiency, Purcell enhancement, as well as charge noise that causes blinking and degrades indistinguishability. Here we demonstrate a tunable nano-optoelectronic device based on a quantum dot embedded in a p-i-n diode circular-Bragg-grating-resonator and featuring extraction efficiencies up to 0.55(6) and Purcell-factor of $\sim$8. The device generates wavelength-tunable entangled photon pairs with suppressed blinking and raw (corrected) concurrence > 0.89 (0.91) over a range of 1.6 nm. The very same source also emits single, nearly Fourier-limited and highly indistinguishable photons with raw (corrected) $\mathcal{V}_{\text{HOM}}$ = 0.951(4) (0.988(6)). These results demonstrate a viable platform for semiconductor quantum photonics.

quant-ph↗

arXiv2026

A complete fs-laser-ablation route to miniaturized single-crystal PMN-PT piezoelectric actuators

This article presents a novel fabrication route for miniaturized piezoelectric actuators that relies exclusively on processes based on femtosecond (fs) laser ablation. Previous work has already demonstrated that fs-lasers are uniquely suited for the fabrication of piezoelectric actuators based on PMN-PT, which are required for multiaxial strain-tuning of quantum dots (QDs) to enable, e.g. the generation of highly entangled photon pairs. Building on these foundations, the present work advances actuator performance and capabilities by introducing a local thinning strategy. This approach allows the realization of smaller devices, which in turn enables lower operating voltages, while simultaneously offering the possibility of integrating multiple quantum light sources on a single chip. The article provides a detailed description of the full fabrication chain, entirely based on fs-laser processing steps, from substrate thinning to metal layer structuring and final device definition. A particular focus is placed on the final cutting process, where the implementation of a third-harmonic ultraviolet (UV) fs-laser wavelength significantly improves edge quality and shape definition compared to the second harmonic (SH) wavelength used in previous work. The device fabricated through the combination of local thinning and UV-based cutting promises not only to enhance the efficiency of strain transfer but also to ensure the mechanical stability required for practical applications. These results establish fs-laser-based fabrication as a versatile and scalable method for next-generation piezoelectric actuators, paving the way for advanced strain-engineering approaches in semiconductor quantum optics and integrated quantum photonics.

physics.app-ph↗

arXiv2025

Low-density InGaAs/AlGaAs Quantum Dots in Droplet-Etched Nanoholes

Over the past two decades, epitaxial semiconductor quantum dots (QDs) have demonstrated very promising properties as sources of single photons and entangled photons on-demand. Among different growth methods, droplet etching epitaxy has allowed the growth of almost strain-free QDs, with low and controllable surface densities, small excitonic fine structure splitting (FSS), and fast radiative decays. Here, we extend the local droplet etching technique to In(Ga)As QDs in AlGaAs, thereby increasing the achievable emission wavelength range beyond that accessible to GaAs/AlGaAs QDs, while benefiting from the aforementioned advantages of this growth method. We observe QD densities of $\sim 0.2\ μ\mathrm{m}^{-2}$, FSS values as small as $3\ μ\mathrm{eV}$, and short radiative lifetimes of $\sim 300\ \mathrm{ps}$, while extending the achievable emission range to $\sim 920\ \mathrm{nm}$ at cryogenic temperatures. We envision these QDs to be particularly suitable for integrated quantum photonics applications.

physics.app-ph↗